Caps Lock OSD not showing (U410)

Hi,
I would like to know if there is a way to enable caps lock screen indicator on U410 models with Windows 8.
I know that there is a Quanta Caps lock OSD driver for Windows 7 but it does not enable cpas lock screen indicator. I reinstalled the Lenovo energy management but still not showing caps lock screen indicator. Is there a way to turn on the caps lock OSD? Any help would be appreciated.
Solved!
Go to Solution.

hi kang106,
Welcome to the Lenovo Forums.
The Ideapad U410 here on the lab came with Windows 7. We decided to upgrade it to Windows 8 (thru Windows 8 Upgrade Assistant) and the OSD drivers for the brightness, volume, and capslock are all working.
Have you tried to uninstall the capslock OSD and lenovo energy management (windows 8 version) and reboot then reinstall the Lenovo Energy Management (Windows 7 version) and capslock OSD driver and reboot?
Regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

How can I get a Caps Lock indicator to show on my Aspire E1 571?

I can't see any indicator to show if Caps Lock or Number Lock is on. There are no LEDs on the keyboard, the function key brings up a notification on screen but not caps or num lock. Thanks

I wanted to know the answer and found this solution when trawlling though the official aer site: This article only applies to: Windows 8 When pressing the Num Lock or Caps Lock on your keyboard, there is no notification to indicate the status. The on-screen indicators for Num Lock and Caps Lock are not available in Windows 8. Instead, it is possible to activate a beep signal when the key is pressed: Press theWindows () key to open the Start screen.. Type Control and select Control Panel.In the Control Panel, selectEase of Access.SelectChange how your keyboard works.EnableTurn on Toggle Keys.Click or tapOK to save the changes.

Keyboard delete and caps lock keys not working after update

Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
2. Update key board driver (standard PS/2)..it says latest version is installed.
3. Uninstall and reinstall.
4. Reset using the remove batteryt hold down power key option.
The caps lock and delete does not work in Notepad or MS Word.
It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
I am using Windows 7 Home premium on a 64 bit HP G62.
help appreciated as ever
thanks
matyiii

matyiii wrote:
Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
regards
Matyiii
Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

All the fonts are in caps and the cap lock is not on. PSE 8

all the fonts are in caps and the cap lock is not on. PSE 8 Why is this happening and how do I fix it?

Suggest that you reset preferences. This will frequently correct things like you are experiencing.
Windows
Step 1. Hold down the Alt + Ctrl + Shift keys as you click on the icon to open Elements. When asked if you want to delete the settings file, say yes.
Step 2. Reset the preferences .
Step 3. Close Elements and let the file regenerate.

Wireless keyboard caps lock issue (not LED related)

i just bought an iMac last week and I'm having a weird issue with caps locks. It seems like that particular key needs to be pressed harder than the rest of the keys to register a keystroke. If I hit it lightly, the key will depress but the keystroke won't register and the LED light won't come on. Any other key, even if I hit it very lightly, as long as it was pressed down, the keystroke is registered,
I found the right amount of force where I can press it down like 10 times and it won't register the keystrokes at all. When I'm typing fast, I'll have to go back to capitalize almost 80% of the letter that need capitalizing even though I hit the caps lock key while I was typing. All the "I"s, the first letters of every sentence and the first letters of proper names.
I've had plenty of keyboards, some wireless and I've never had this issue, nor have I had it on my Macbook. I'm just wondering if this is how it was designed to work or if I have a faulty keyboard that I need to go and replace.

Hi Guys
Glad I've just found these posts. Got a new 27" iMac just before Christmas. Greatly relieved that everything worked despite all the reports of cracked screens, etc. BUT - only small problem was the Caps Lock light not always coming on. Rang Apple and got a replacement. Now today I'm having same problems - first the light froze and wouldn't go off. Then it wouldn't come on. I've now tried your advice of switching off the keyboard and taking out the batteries. Works OK now. Hopefuly it'll stay that way. Only thing is - pity Apple couldn't have given me that advice. Reading these posts, there is clearly an ongoing problem with the caps lock light on the wireless keyboard. A problem thats been around for months. Clearly Apple's poilicy, as always, is to admit nothing until it comes up with a fix. Pity that policy appears to extend to not even telling their own employees that there is a problem ...

Caps lock light not working properly

My Laptop caps lock is not working properly , when i press it , the light just flashes and dissappear , the light is suppose to stay there , the things that i type will still be in caps though , any idea how this happens?

Hey,
Sorry to hear about the keyboard problem.
In a post a while back had this to say. He makes a suggestion that the keyboard might need to be replaced, then the person with the question tried something else. You might take a look and see if there's something there that will help.
Thanks for coming to the forum.
Hope I helped,
GeorgeFN
I work on behalf of HP.

HT1192 Caps Lock is not working in my mac, after pressing long time too.

Caps Lock is not working in my mac, after pressing long time too.Please help me to sort this problem out.

I think even in newer versions of OS X there is a slight delay; just not so pronounced. My advice to get around it would be to install PCKeyboardHack and KeyRemap4MacBook - then do a couple of things:
Change the Caps Lock key in System Preferences > Keyboard > Modifier Keys to "None"
Use PCKeyboardHack to remap Caps Lock to keycode 110, the PC Application Key, which is unused on Apple keyboards.
Then use KeyRemap4Macbook to map that particular keycode to Toggle Caps Lock.Try selecting For PC Users > Change PC Application Key > Application Key to CapsLock.
I'm pretty sure that should get rid of the delay, which only happens when Apple is in charge of connecting the Caps Lock key to its action.
Really, though, I would personally recommend doing some much more awesome things with your Caps Lock key; it's prime keyboard real estate, and who uses caps lock anyway, except in the darkest corners of the Internet? Personally, I've remapped Caps to be Escape (for use in my text editor) when you press it by itself quickly, but to be Cmd+Opt+Ctrl+Shift when you press it with any other key. I call it the "Hyper" key, and use it to switch applications; Hyp+S = Safari, Hyp+D = email, Hyp+F = Finder... The point is, be creative, make the Caps Lock key work for you.
Oh, and the real Escape key maps to Caps Lock, so I can use it if I want to.

Wireless keyboard caps lock light not working

Hey, said it all in the title but here's the story...
Got home today and realized that the caps lock LED don't light up anymore. Has anyone else had similar problems? If so, how was your situation rectified?
The keyboard still works fine, don't think its a bad enough problem to have it replaced or be without it for ages. Could see if apple will allow a straight swap at the shop...

Hi Guys
Glad I've just found these posts. Got a new 27" iMac just before Christmas. Greatly relieved that everything worked despite all the reports of cracked screens, etc. BUT - only small problem was the Caps Lock light not always coming on. Rang Apple and got a replacement. Now today I'm having same problems - first the light froze and wouldn't go off. Then it wouldn't come on. I've now tried your advice of switching off the keyboard and taking out the batteries. Works OK now. Hopefuly it'll stay that way. Only thing is - pity Apple couldn't have given me that advice. Reading these posts, there is clearly an ongoing problem with the caps lock light on the wireless keyboard. A problem thats been around for months. Clearly Apple's poilicy, as always, is to admit nothing until it comes up with a fix. Pity that policy appears to extend to not even telling their own employees that there is a problem ...

Caps lock button not sensitive enough

I just bought a new macbook air , and I found that the caps lock button not as sensitive as other buttons, what should I do now ?
I have to press a bit longer and harder to make it detected.
thanks!

I'm not sure if you've resolved this issue but I solved the problem by removing the charger plug, then the battery. While the battery is out, push the power button. Reinstall the battery and reconnect power. When the notebook rebooted, the caps lock light and num lock lights were once again working.

2009 Aluminum Keyboard caps lock light not functioning

Greetings:
I bought my wireless keyboard in February 2010 and it works but lately the caps lock light has not been coming on when I hit the caps lock key. I took it to a local Apple Specialist to try to figure out what is going on and it of course worked when he paired it to his machine.
I got it back home and re-paired it to my mini (2009 2.25 mhz intel) and it worked for the day... now it is not functioning again. I unpaired the keyboard and re-paired it again and the light functions again for the time being. But if it holds to pattern, tomorrow it will be non-functioning again.
I have the latest update for the keyboard installed and I am at Snow Leopard 10.6.3 on the system.
It appears that if the keyboard goes to sleep, this phenomenon happens. Any ideas?

I think that re-pairing the keyboard does essentially the same thing as restarting the machine would do with regards to resetting the keyboard. I did replace the batteries today just to see if that would help. -- so far, the light is working still and the keyboard has been asleep for a couple of hours since I replaced the batteries. They showed 81% when I replaced them this morning.
I would like to know if this is a common problem. The keyboard always works, just the caps lock light stops working which is annoying for me because I tend to hit it by accident and the light is a good way to see that I did, in fact, hit the key.
I am marking the question as answered, but hopefully someone has a real fix for it, or Apple has a new firmware update coming soon

T530 - Caps Lock Indicator Not Working

Sporting Windows XP (32-bit) on my T530 and as of recently, Caps Lock indicator has stopped working. Mute, Volume, Screen Brightness indicators are working as per usual, only CL indicator is not working anymore. Tried upgrading Lenovo Hotkey Features, rebooted but still no go. Also, I can't remember where do I find settings for Caps Lock indicator? IIRC, it should be somewhere in Control Panel/Display/Settings/Advanced/OSD, but it disappeared. I can only enable/disable OSD, adjust fade-out time and background/foreground color(s). Options for Caps Lock indicator are missing. Anyone experiencing similar problems?
T530: i7-3630QM, 4 GB DDR3-1600, NVS 5400M, 2x 500GB 7200RPM, 9-cell, HD+ 1600x900, Backlit US, WinXP Pro
L430: i3-2370M, 4 GB DDR3-1600, HD 3000, 320GB 7200RPM, 6-cell, HD 1366 x 768, Win7 Home Premium 64-bit

I had the same problem. The newest hotkeys integration package is gevu60ew.exe and it has problems on XP. Here is how I fixed it:
Download gevu60ew.exe from the Lenovo website.
Install gevu60ew.exe, don't reboot.
Run the installation again from C:\Drivers\Hotkey\setup.exe.
Choose the uninstall option and uninstall everything you see.
Reboot.
Go to your program files directory and delete the folder "%ProgramFiles%/Lenovo/HOTKEY".
Download and install gevu43ww.exe, don't install the patch.
I found the file gevu43ww.exe here (but if you've used System Update it's probably already saved on your computer, do a search for it):
www.filefobia.com/goto/download/29321/10
Reboot.
Should be fixed, no promises but it worked for me.

Caps Lock Key not displayed when active on Key board for HP P7 1410

How can I tell if my Caps Lock Key is active??

Hello Again,
If you click on the link below it shows you how to sync, and the instructions are pretty standard with other wireless devices we have. The little receiver that you have plugged into the computer might not have a button on it, but there should be a sync button on the bottom side of the keyboard.
Also after doing some research I was able to find out that less and less of our wireless keyboards are coming with the standard caps lock light. Also if the wording itself doesn't come up on the screen when you press the button and the keyboard is functioning as such then the keyboard doesn't provide that function.
How To Sync
Please respond at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Caps lock light not glowing

Hi, I have Compaq Presario V6810ei, with Windows Vista Home Premium(32 bit). The problem is LED of Numlock is not glowing whereas it's showing numlock status at right-bottom of screen and Caps Lock is working perfectly(just Caps lock LED/Light is not working). It happened w/o any OS crash or anything else. I don't know where is the issue my laptop's BIOS is upto-date. Please guide me how to resolve this issue. Thanks in advance!

I have the same problem and I think it started when I downloaded the SP2 for the Windows Vista. So probably it is not a problem of the laptop. I have an HP Pavilion dv9500 notebook PC.
Message Edited by Yannis1980 on 10-13-2009 12:09 PM
Message Edited by Yannis1980 on 10-13-2009 12:09 PM

My caps lock is not working! (Nothing happens when I press it and I cant see any light turing on or off)

Hey guys,
My Caps lock doesnt work, I cant see any green light... I have a NEXXTECH 2.4G Wirrless Mouse and Keybored Combo Set
I have bought it 2 weeks ago and I just noticed that my mac's keybored caas lock doesnt work. I think my keybored settings are bit mixed up so I tried to search on google about "How to reset the keybored's settings" (like a factory rest but only the keybored settings NOT the computer.) Please I dont know what to do, any help and tips will be really appreciated.
( I have a MacBook Pro Mid 2012 with 10.8.2 )

Sounds like a hardware failure of the button. Since you're most likley out of warranty, Google for a phone repair shop near you.

Smart cover lock option not show in setting in new ipad

hi
i have a new ipad 64 wi-fi 4g and i used smart cover.
when i conected smart cover to new ipad, in setting>general not show smart lock.
plese help me

Mine did not show up until I ran a kitchen magnet along the edge of the iPad. I heard a click and then when I went to Settings, the option was there. I had a cover that was SUPPOSED to work with the new iPad, but the magnet was in the wrong spot, apparently. I discovered the locationproblem by using the magnet trick............and in the process, managed to activate the smart cover option

Caps Lock OSD not showing (U410)

Similar Messages

Maybe you are looking for