Caps lock won't turn off

My updated 3G iPhone keyboard is slower and caps lock won't turn off after turning on with a double tap. If I switch to numerals or special characters when I go back to main keyboard caps lock is off. Anyone having the same issues or any solutions?

Please read teh directions for an SMC reset:
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

  • Wired keyboard issues-caps lock won't turn off and other keys do not type

    I sat down today to use my May, 2010 iMac.  Fully up to date with Lion.
    I am using a WIRED keyboard. 
    The caps lock key is permanently on and the remaining keys when pressed do nothing.  They do not work.  You can press the keys down but they don't type any letters or symbols of any kind.
    I cannot log in because I can't type my password as the keys don't work.
    I can't do a PRAM reset because the  P and R keys and others don't work.
    I don't know what an SMC reset is but I can't do that either because the keys don't work.
    Why would a keyboard stop functioning?  Yesterday, it was just fine.  Now it doesn't work. 
    What causes the caps lock key to stay on?
    I have unplugged the keyboard etc, but nothing changed. 
    Doesn't anyone know how to correct this problem?  Do I just need to buy a new keyboard? 
    I called Apple but they were closed. 

    Please read teh directions for an SMC reset:
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Apple wireless keyboard caps lock light wont turn off

    I have an apple wireless keyboard that came with my 2011 imac and up untill last month the caps lock light wont turn off even when i turn caps lock off and its draining my battery. usually the keyboard will turn off whenever the computer was off but now i have to turn the whole keyboard off everytime im not using it to save battery.

    It is probably faulty.  If you are close to one, I suggest you take it to an Apple store for diagnosis.
    Barry

  • CAPS LOCK lit, won't turn off

    CAPS LOCK stays lit and won't turn off, keyboard caps remain on. I'm able to hold the SHIFT key and the computer will go into lower case. When typing a sentence with the CAPS LOCK lit, the computer CAPS LOCK light goes off and I'm able to type in lower case. The minute I stop typing, the CAPS LOCK lights and remains on.

    Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds); (if the computer doesn't power on, move to the next step)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • IPad won't turn off so I can reset it because my emails are locked.  I receive emails but can't access them, can't delete, can't send.

    My iPad won't turn off so I can reset it.  My emails are locked but I receive emails as the number of emails increases.  I can't access these emails, I can't delete the one email showing, and I can't send an email.  The screen is locked.

    Try a reset:
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • 3-wk old iPad won't turn off. Has words on the screen that say "iCloud Backup, This iPad hasn't been backed up in 3 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi." The message has OK below it but won't disappear. HELP!

    Three week old iPad won't turn off.  Has words on the screen that say:
    iCloud Backup
    This iPad hasn't been backed up in 3 weeks.
    Backups happend when this iPad is plugged in,
    locked, and connected to Wi-Fi.
    OK
    When I click on the OK button nothing happens.  I have tried to turn the iPad off and restart but I can't even do that. What is happening with the iPad?
    Thanks
    Mary

    Fantastic, thanks so much.
    This also helped my problem.
    You're a gem!
    Have a great one
    Jess

  • HT1688 my Iphone 5 has a black screen and won't turn off/on. It locked on my yesterday while in photos and then it went black.

    my Iphone 5 has a black screen and won't turn off/on. It locked on my yesterday while in photos and then it went black.

    Hard Reset: HOld the home button and the sleep/wake button of your iPhone for about 10 to 15 seconds at the same time. Holding down both buttons at the same time  till you see the apple appear

  • Umm...it won't turn off

    I hope I'm not just being dense and missing something obvious, but my iPod simply won't turn off. It's not locked, and I've tried resetting it, but absolutely nothing happens. It will play music just fine, which would be lovely for walking to class if I didn't have to leave it on the charger all day for fear of the battery dying. Any help, or even a "Katelin you're so stupid, just do this" would be greatly appreciated.

    try this
    settings>main menu>sleep
    toggle sleep to "on"
    "Sleep" will now show up on your main menu
    scroll to "sleep"
    hit center button
    It should turn off now. If it's a brand new ipod, I would return it.
    hope this helps
    emac   Mac OS X (10.3.9)  

  • K7N2 Delta ILSR won't turn off, just restarts

    K7N2 Delta ILSR won't turn off, just restarts.  Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that the other machine has BIOS rev 7.6 and this one 7.2.

    PSUs seem to be yr favorite subject, but I'm afraid this time it's software. I experimented some more as the problem only occured after installing the Nvidia drivers. Comparing the system settings in the device manager before installing drivers and after installing them, reveils that the problem shows up when AGP HOST TO PCI BRIDGE is installed. When killing this item the PC shuts off properly. Unfortunately when turning back on, Windows automatically reinstalls the PCI bridge and I have the problem again. LOOKS LIKE A MSI SOFTWARE PROBLEM !
    By the way I have a PCI graphics board and not AGP in the failing PC (the good one has AGP graphics).
    Now what?
    R.

  • My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

    My iPod Classic 160 is in disc mode.  I responds to nothing.  iTunes doesn't recognize it.  It doesn't sync.  I've tried to restore and got error 1429.  Now it just stays in disc mode and won't turn off.  I'm keeping it connected to the charger so it doesn't go dead.  Is there anything I can do to resurrect my pod?

    To get out of disk mode do a iPod Hard Reset.
    Toggle the Hold switch till you dont see the red mark.
    Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
    Select your preferred language.
    See this Apple support Article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you try to restore and get a1429 error message, read this Apple Support Article
    http://support.apple.com/kb/TS1372
    Good Luck!

  • I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

    I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
    I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
    Please help me..

    Accidental damage is not covered under Apple warranty.  And it seems there is much accidental damage.  Only a Genius Bar tech looking at it can tell how much it will cost to repair.
    Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
    There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • TS3274 my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • My ipod touch is disabled and won't turn off, itunes doesn't recognize the device and i can't see the serial number on the back

    My NOSY (now ex) husband did something to my ipod touch and it is now disabled. It was dead and I charged it and NOW the sucker won't turn off. When I connect to itunes i see a message that says i have to UNLOCK it with a passcode. I tried to get apple support but they want my serial number. Well...the ipod wont turn on!!! I've had it at least 6 years and have moved and I can't find my paperwork and WHO can read that serial number on the back? I know its kind of outdated (third generation, I believe)but its mine, I love it and it has ALL my music on it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HP Color Laserjet 3550 - the "attention" light won't turn off

    I've tried everything I can think of for weeks but I can't get the "attention" light on my HP Color Laserjet 3550 to turn off.  It originally came on when a page on from the manual input tray got stuck maybe 20% of the way in.  It was a real easy fix,  I pulled the page out and now the "attention" light won't turn off.  So I can use the printer at all.  I've had this printer about a year. I purchased it used.  I've always had the manual feed tray as the default because I use this printer mostly for envelopes and less than 81/2 x11 printing as I have an old workhorse HP 4+ for all my straight 81/2 x 11 printing. I've rebooted. I've unhooked cables and the router.  I've opened up the printer and removed the casing (the plastic apparatus on the door)  and replaced it. The router is a 2Wire HomePortal 1800HG.  I'm just baffled here I've printed so much with the manual feed tray and I've had allot worse things happen that I've had to fix.  Now a simple stick like this and the light just wont' go off.

    ShlomiL wrote:
    HI Vern,
    Where did you bought the printer? may you bought it from a different region than your current one?
    What is the exact cartridge number of both the black and the tri-color ink cartridge, as well as their product number?
    I bought the printyer in the US and the cartridges also came from the US,  probably no the same state.  Cartdridge # 97,  black # 96.  I don't see a product number.  This is the same # that was in the printer before and the same one I always used.   As soon as I pull it out the light goes out,  and on again as soon as I install it.  This is before the printer even cycles through it's "new cartdridge" routine,  if you know what I mean.
    thanks for the reply

Maybe you are looking for

  • Error when login to bi publisher desktop 11g

    Hi expert, I have a problem with BI Publisher Destktop when I login. I fill username , password and Report server , click Login button then I got the error : error : "Error while trying to access to Report Server Location : Object reference not set t

  • Excel Report Generation in Report Builder 6i

    i want to generate Reports in Excel using report builder 6.0. is there any facility to generate reports in report builder 6 in proper excel format

  • Can a method return a class ?

    hi, i have a simple question. can a method return class value ? in the below script i did'nt understand the commented line. package com.google.gwt.sample.stockwatcher.client; import com.google.gwt.user.client.rpc.RemoteService; import com.google.gwt.

  • Timezone issue with Node manager

    Hi We have a strange problem in our Weblogic manager server as below. We started the manage server & Node manager in Jan 2011, when the daylight saving was on., then when time zone changed to winter time to summer time, node manager was unable to pic

  • HR programming : Handling retro

    I have this scenario. 01.2009 Basic Pay - USD1000.00 02.2009 Due to salary increment to USD1100 but effective from 01.2009 so, for period 02.2009 the basic pay calculated is RM1200 [1100 + 100 (retro for 01.2009)] 03.2009 Some action cause the retro