Caps/Num lock LED indicators not working in gnome

I have a qPad MK-85 mechanical keyboard, and I can't seem to get the LED status indicators for the lock keys to work.
The CAPS and NUM lock function still works, but I don't have any indication whether they'r'e on or not.
It only seems to be under gnome I have this problem, because they're working just fine in grub, windows, and tty2-6.
I have done a search and it seems a lot of other people with mechanical keyboards have the same problem, but no solutions.
So.. anyone here have any solutions?
Edit: tested in xfce, not working there either
Last edited by vstuen (2013-01-04 18:49:16)

No reply means no one can help I suppose.

Similar Messages

  • DM3-1132TX - Keyboard - Num Lock LED Light - Not Working

    Hi, I have the abv problem on my <1yo notebook.
    Still wondering why it doesn't work.
    Remedy : tried to reinstalled the  HP Quick Launch Buttons on the Driver & Support site, restart the computer and still cannot solve the problem.
    Need help, thanks
    Regs
    Ray

    No reply means no one can help I suppose.

  • Bricked my touchsmart -tx2 1025dx. Cap/Num lock LEDs blinking once.

    Bricked my touchsmart-tx2 1025dx.  Cap/Num Lock LEDs blinking once, so I replaced the processor but the LEDs are still giving me a single blink (processor issue).  Any advice?

    Hey NikosK,
    The one-blink code is indicating an issue related to CPU and/or system board (bent pins, etc.). It's possible that the system board needs to be replaced.
    Here's a table of all of the LED codes:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01443366&lc=en&cc=us&dlc=en
    Do you know what caused this issue in the first place, before replacing the processor?
    I am an HP employee.
    • Say thanks by clicking the 'Thumbs Up' button on the left
    • Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

  • My caps lock LED is not working

    my laptop (splitx2 ultrabook) is hardly a month old and the capslock LED has already stopped working. initially it would just get dim and burn out eventually but now it won't show up at all. i tried updating the bios and system recovery and everything
    please help. my pc is hardly a month old

    Its likely that the keyboard is broken somehow physically, and should be replaced if you are not happy with it. Call or chat HP for a repair order.

  • CAPS LOCK light is not working

    Hello dear guys, 
    Had a problem today - some keyboard keys didn't work properly. 
    I opened the laptop (Pavilion G6 2241sa) cover and saw that keyboard cable was loose. I reconnected it properly, closed the cover and switched laptop on. Now, all  keys are working fine, BUT CAps Lock light is not working well. Key is functioning, but when I press it - the light come on, but as soon as I release the key - the light goes off. Light doesn't stay. Also when the actual function of caps lock is on, when I press any other key the light come on the surface of Caps lock key but it is dim. 
    I recheched keyboard cable again - all is fine, but Caps lock light doesn't stay on when pressed. 
    I do practice typing for the last 3 months for few hours each day, so I guess it also affects the life span of my keyboard.
    Would appreciate any insights about this Caps Lock light. Many thanks, Vit
    This question was solved.
    View Solution.

    Hi there @vitsirius 
    I understand that the Caps Lock LED is not working, after you had fixed a loose connection to your keyboard.
    You may want to walk through this page and see if something may help
    Notebook Keyboard Troubleshooting (Windows 8)
    Also for your convenience here is the maintenance guide. It is possible when you were working on it one of the of the other connections was loose or became so.
    HP Pavilion g6 Notebook PC Maintenance and Service Guide
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Caps lock/scrol​l lock/num lock/ LEDs not working - instead pop-ups in bottom RH corner of screen

    Specific details; p/n: GS066PA#ABG,  4 GBytes DDR2 RAM, OS Windows 7 (6.1) Ultimate Edition 64-bit Service Pack 1 (Build 7601) DirectX 11.0.  LED's were working but during one of the windows automatic updates they stopped working.  I don't know which update.  Now I get little pop-ups "CAPS LOCK: ON" etc (black text on white background).  If I rename bttray.exe to bttray1.exe and restart the laptop, that kills the pop-ups in the bottom RH corner of the screen but it does not restore the operation of my blue indicator LED's.  Can anyone help please?

    Hi @haggis1 ,
    I saw your post regarding the problems with the pop-ups and LED lights not working after a Windows Update. Most likely there was a problem with the update when it was installed. This Microsoft Support link will show you how to uninstall an update. Try uninstalling the most recent updates and the restart the notebook and see if the LEDs start working again.
    If that fixes the issue then there is another section in that link entitled: I remove an update but it gets automatically installed. That will show you how to hide an update.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Caps Lock/Num Lock LED blinks 5 times on bootup - HP ProBook 6450b

    Hi all members/pros, I was tasked to resolve a bootup issue on a HP ProBook 6450b and did managed to get it up and running again without much effort. The notebook Caps Lock/Num Lock LED flashes/blinks 5 times  and then pauses and blinks again 5 times. Seeked assistance on online HP support(link below) and it stated that it was a System board failure. http://support.hp.com/us-en/document/c01732674 So then I opted to swap the hard disk tand LCD monitor hardware with with another HP ProBook 6450b which is functional but display damaged as the user was a senior manager at where I worked - Boroko Motors, Papua New Guinea - and prolong downtime was not an option. Just as I was about to get under the hood, the buggered notebook deciided to spring back to live loading onto the Windows login screen. I noiced also that I was in our server room(with much cooler temperature) that may have aided the componenets on the main borad to function so I presumed the cooling system was at fault. I then got under the hood and confirmed that the fan/vents were clogged up with dust/debris which might have collected over time. Did the cleaning and after that it hasnt failed so far... Thanks all! Get the HP ProBook 6450b service manual here: http://h10032.www1.hp.com/ctg/Manual/c02760808.pdf   

    I, recently, bought a 6735b hp laptop for $100. It does the same thing as your describe. I think the motherboard overheated. So, I ordered a new motherboard from getcomputerparts.com out of China to see if it will solve the no boot problem. I'm hoping this will solve the problem. I noticed that when I first got the laptop, second hand, that the fan wasn't blowing out, and later found a lot of dust that simply blowing it out solved the air circulation problem. I think that the heat destroyed some connections to the video or hard disk drive controller chip which made my hdd light blink on and off every second or so, and also made my Optical Drive seem to blink its LED on and off, and a slight scratching sound every second, as well.
    I also, saw on Youtube.com, a video about the nvidia video chip getting connection heat damage at the solder joints, and there was a way of putting a penny with heat sink paste after 'burning' it for a couple of hours with a hot spotlight lamp with aluminum foil around the rest of the board to protect the rest of the board other than the video chip. But, this was on another hp product that failed after 1 year, no screen no POST.
    I am hoping a 'new' system board will do the trick though, and I am spending about $153 for the part delivered, and $75 to put it in at a local computer shop.
    part url:
    http://www.getcomputerparts.com/hp-compaq-6535b-6735b-series-laptop-motherboard-system-board48819400...
    Wish me luck!
    -Duane

  • HP Pavilion DV7-1428ca _ CAPS + NUM LOCK Continually Blinks + Will not Start up Black Screen

    Would appreciate any suggestions on the issue I am encountering.
    I have an HP Pavilion DV7-1428ca that was left powered on, so it went into Safe mode (screen goes blank). Once I came back to my Laptop hitting any key would take out of of the Safe mode however this time it did not. It remained with black screen irregardless of buttons pressed.
    Had booted and can hear the fan and hdd go for the 2secs then it stops to a Black Screen with the "CAPS + NUM LOCK" Continually Blinking. Tried to Hard Boot several times but the same thing re-occurs.
    It does not seem to be blinking in a series a code, just a steady blink (every sec) for both the CAPS + NUM Lock for as long as I leave it on. HP Site provides a chart from 1-6 series of blink codes which does not seem to apply to me.
    Being out of Warranty I am hesitant in bringing it to a local repair shop without trying any alternate trouble shooting first.
    Thanks

    Hi,
    First of all, shutdown the notebook, unplug the AC Adapter unplugged, remove the battery, and then hold down the Power button for a full minute.  Plug in the AC Adapter ( leave the battery out ) and see if the notebook will start.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Repurposing a Caps-lock LED as a Num-lock LED

    On my laptop, I recently remapped my Caps lock key to a backspace key. Therefore, I now have a keyboard LED that never lights up. Worse still, despite having a numpad, this laptop does not come with a blasted Num-lock LED!
    I am wondering if there is an elegant way to sort of repurpose the Caps-lock light as a Num-lock indicator. I'd like something a little more intelligent than "write a shell script that polls the numlock status every X seconds and set the caps lock light accordingly."

    I imagine that this would be dependent on what brand of system you are running, and whether there are proper wmi modules for it (and if these modules provide LED control).

  • Satellite A660 - Num Lock LED not on

    Hi everyone!
    I've a problem with the Num Lock LED. Although the num lock is on, LEDs do not indicate this. This interferes me at work, a bit.
    Any Ideas?
    Regards, G.

    Hi buddy,
    So you can use the number pad but just the LED is not on?!
    Well, theoretically the LED could be faulty so its not on. Thats the only explanation I have. I mean if the num pad works its no hardware malfunction of keyboard itself so it must the LED
    Do you use the preinstalled Windows version?
    If your notebook is under warranty you can get a new keyboard for free. Just get in contact with an authorized service provider and explain the situation. The guys will help you to get rid of this :)

  • Caps lock key does not work...

    my caps lock key was working perfectly up until 10-15 minutes ago.
    when i press my caps lock key, the little light on the key does not turn on and all of my letters remain in lowercase.
    i thought perhaps something was stuck underneath the key, but when i took the key off - nothing was there. i placed it back on and still the caps lock key does not work.
    does anyone have any ideas as to why the problem could be and how to fix it?

    Finally found something that worked for me. See this thread and look for the post about removing the Hitoolbox plist files.
    http://discussions.apple.com/thread.jspa?messageID=10765093&#10765093
    I removed all of them. (Had multiples) Also make sure you empty the trash afterwards.
    Then restart.
    Then I used the modifier key trick in this thread. Turned off the caps lock key. Then restart.
    Then use the modifier key trick and turn the caps lock key back on. Test to see if your lights come back on for the caps lock key.
    If so, next time you restart it should still work. Finally. This thing has been dogging me for a long time.

  • Satelite P50-A-14E - Caps lock key is not working

    Hi all,
    My CAPS LOCK key is not working on my Satelite P50-A-14E series laptop. Just realized while writing an email that is not working so is more or less sudden. Nothing has been spilled on it. Here is what I've checked so far:
    - green light indicating that CAPS is LOCKED illuminates while pressing the key from on screen keyboard
    - keyboard backlight doesn't start when I press the key but It works for the key itself when pressing any other key.
    - tried a clean boot but no result.
    Thanks a lot for your help.

    Hi
    > Just realized while writing an email that is not working so is more or less sudden.
    Did you test the CAPS LOCK button using different software: internet browser, word or another editor?
    How about the usage of external keyboard?
    From my point of view there are two possible malfunctions: either there is some problem with the software you are using or the internal keyboard simply malfunctions and in such case the keyboard replacement will solve the problem.
    You could test the external USB keyboard. In case the USB external keyboard CAPS LOCK button would functions, then the internal keyboard has to be replaced for sure.

  • Caps lock key is not working

    i just bought my macbook air. the caps lock key is not working and the green light doesn't coem on. I tried holding it down for a while but it still didn;t work. I rebooted several times and once  i held doen the cap slock during booting andthe green light came on but once it fully loaded it went off and I couldn't get it to come back on.

    Hi
    > Just realized while writing an email that is not working so is more or less sudden.
    Did you test the CAPS LOCK button using different software: internet browser, word or another editor?
    How about the usage of external keyboard?
    From my point of view there are two possible malfunctions: either there is some problem with the software you are using or the internal keyboard simply malfunctions and in such case the keyboard replacement will solve the problem.
    You could test the external USB keyboard. In case the USB external keyboard CAPS LOCK button would functions, then the internal keyboard has to be replaced for sure.

  • HP Pavillion dv6446 caps/num lock lights won't light

    i had my laptop screen replaced and when i got it back the caps lock/num lock lights wern't working. i took it back to the guy who fixed it and he told me it he couldn't replace the LED's because they needed to be replaced and he didn't know how to replace LED's mounted to the motherboard. i found it a bit funny that both LED's blew at the exact same time, especially since i had several other problems that appeared after he replaced the screen (those problems have since been fixed by myself). is there some controller that has been messed with that would cause the LED's to not light up?

    I am facing the same problem with my dv6500 and never had a so big issue as yours. I believe leds are ok (when I press "fn" + num lock) this led lights up. I would really appreciate a help from HP in this issue.

  • I updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do

    i updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do. i tryed restoring but it didnt work .
    When i try the camera loncher  but  it's not working

    i feel stupid now because i didnt know to swipe it up lol
    thanks

Maybe you are looking for