Caps, Scroll and Num Lock Notification - How to disable

Hi,
When i hit either my caps, scroll or num lock on my keyboard have this small notification popup and have problem disabling the function.
How will i go about to disable this?

C:\Program Files (x86)\Hewlett-Packard\Shared
Find hpCaslNotification.exe and rename it.
Then open task manager and kill this process.
You have to rename the file, simplly killing won't work because hphotkeymonitor service runs it every time you press caps lock, scroll lock or num lock.

Similar Messages

Pavilion dv7-1245dx caps light and num lock light blink

Got a Hp pavilion dv7-1245dx. When going to start the computer after hitting the power button the all the lights come on on the volume bar, the fan runs and then the caps light and the num lock light start blinking. I can tell if there is a specific number of blinks in a sequence or if it is just one blink repeatedly. This computer is less than 2 yrs old. Please help

I have already tried all the powering down options and nothing is helping. I really need this thing!

Keyboard suddenly requires caps on and num lock on in order to type

But with the caps on it types lower case and won't work if both keys are not pushed. Have I changed keyboards or pushed some code without knowing it?

Sounds like you need some maintenance done. But on the chance that you caould correct the issue yourself, Try a PMU and PRAM reset. If this doesn't work, try the hardware test on the disk that came with your computer.
To reset the PRAM, hold down Option, Apple, O, and F at startup. Wait for two startup chimes.
To use the hardware test insert the disk that came with your computer and hold down D on startup.
If this doesn't work, you will need to take it in for service.
Best Regards,
David Finell

LED near scroll and num locks keep blinking. Does not start often. Computer guy says moth board gone

HP pavilion DV4
Purchased from Singapore

Hi,
Try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for a full minute. Re-insert the battery, plug in the AC Adapter and see if the notebook will start.
If this has not helped the issue, can you match the sequence of 'blinks' to those shown in the table below?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp probook 430 6 blinks times at Caps and Num lock.

My Pc do start but I cant see the Hp logo and The Fan goes full speed but black screen the Caps lock and Num lock Blinks 6 times Tnx for help

Hello afamefrjweortfj,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer spins at full speed, that the screen is black with the Caps and Num Lock keys blinking, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Hard reboot with binking caps lock and num lock lights DELL XPS M1530

After returning from work I saw my DELL XPS M1530 had hung and there was blinking CAPS and NUM lock indicators, I had to hard reboot.
This has happened with me some times.
How can I investigate? Is there some log which i can see after hard reboot?
I am on kdemod 4.1.3 with nvidia stable driver
Last edited by venky80 (2008-11-18 00:44:15)

I used to have that problem on my laptop also. It seems to plague a good number of XPS 1530 owners. From what I can tell the problem seems to be either graphics card drivers or wireless card drivers. Do you happen to have the intel 4965agn card? If not, what hardware do you use for wireless and graphics?

Updating caps lock and num lock status

I need to keep track of the status of the caps lock and num lock keys in a status bar of my frame.
I get the current status with a code like this
Toolkit toolkit = Toolkit.getDefaultToolkit();
numLockState = toolkit.getLockingKeyState(KeyEvent.VK_NUM_LOCK);
capsLockState = toolkit.getLockingKeyState(KeyEvent.VK_CAPS_LOCK);
fireChangeEvent();
where fireChangeEvent() updates a label in the status bar. The code is invoked when any of the caps lock and num lock keys are pressed (while the window has the focus) and when the window is activated. This code works while the window has the focus (i.e. the status of the keys if correctly tracked). It does not work correctly when the window is activated.
Specifically the following scenario fails:
- The window has focus and the state of the keys if correctly reported by the code above (say caps lock up, num lock
up);
- The window loses focus, i.e., another (non java) window gains the focus;
- The user presses any of the two keys (say the caps lock key);
- The window regains focus.
When the latter event happens the code above is invoked (as a consequence of the window being activated) but it continues to report the status of the keys at the time the focus was lost by the window (caps lock up, num lock up).
It seems that the toolkit does not automatically updates its internal status if a key is pressed when the java window does not have the focus. If I press the caps lock key (so that it returns to the up state) after the window has regained focus the status is updated and the new state is correctly reported. I need to manually realign the status by pressing the keys to have them correctly reported by the toolkit.
Some ideas on how to have correct key status even after the window looses the focus?
Thanks.

Specifically the following scenario fails:
- The window has focus and the state of the keys if correctly reported by the code above (say caps lock up, num lock
up);
- The window loses focus, i.e., another (non java) window gains the focus;
- The user presses any of the two keys (say the caps lock key);
- The window regains focus.
When the latter event happens the code above is invoked (as a consequence of the window being activated) but it continues to report the status of the keys at the time the focus was lost by the window (caps lock up, num lock up).sorry! i tried this in a JFrame windowActivated() and i got the desired result it breaks your senario.
the only is though it is not sensing the keyStrokes but if window looses focus because of another window gains focus it changes the values when it get focus next by ne means.
Provide a short executable code might be the problem lies there.

Satellite C55-A and Ubuntu - Caps Lock and Num Lock key leds always off

I use Ubuntu Desktop 14.04 and Mate Desktop and LightDM. My Toshiba Laptop is Satellite C55-A-1JH (PSCG6E) model.
Cap Lock and Num Lock is working , but their leds always is off.
I don't find any Linux driver in Toshiba support web site.How I solve this problem?

Hi. Are you sure this is a Linux-issue? Please try this: reboot the unit and press F12 several times when the Toshiba logo is shown. When the boot menu is shown try Caps and Num lock again.
Same issue or not?
Br Tom

Lenovo T60 Caps Lock and Num Lock

hi my lenovo t60 1953d9u capslock and numlock wont show up on the
OSD.
it shows up on my dad's t61 7665d61
and my uncles thinkpad edge AMD on the edge it shows a graphical capslock and on the t61 it says capslockn/capslock ff
ThinkPad Twist S230U-
OS-Windows 8.1 Pro 64-bit
CPU-Intel Core i7 3517U @ 1.90GHz Ivy Bridge 22nm Technology
RAM-8.00GB Single-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard-LENOVO 3347CTO (CPU Socket - U3E1)
Graphics-Wide viewing angle & High density FlexView Display 1366x768 (1366x768@60Hz) Intel HD Graphics 4000 (Lenovo)
Storage-298GB Seagate ST320LT007-9ZV142 (SATA) 22GB SanDisk SSD U100 24GB (SSD) 29GB SDHC Card (SCSI)
Audio-Realtek High Definition Audio

It shows up on my T61 - which has physical indicators on the screen bevel - there's a small text-block coming up over the clock in the lower right corner, saying "Caps Lock on/off" and "Num Lock on/off" and "Scroll Lock on/off"
So the physical indicators got nothing to do with it.
Running Vista Pro 64 with an odd assortment of Lenovo-apps running/installed (not entirely sure which one is responsible for this behavior, unfortunately, since I've reinstalled and removed several on and off to see which ones I really need and which are useless).
IT-technician, running my own company in Bergen, Norway
Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050

Windows 10 Caps Lock and Num Lock dosen`t work

Hi guys,
I have a problem to report, on asus k52de dosen`t work Light from the Caps and num lock .
This problem appered yesterday when windows make the last update.
If anybody is in the same problem like me please answer the solution.
THX

I've developed registry settings that both enable the "Filter Keys" feature in the Ease of Access center and use other values for which there are not UI fields to set repeat values to slow things down, but use values a little different
than those provided by the UI.
With this registry file the start of auto-repeat is slowed to 440 milliseconds, and the keys repeat at a reasonable rate of something around 30 per second.
http://Noel.ProDigitalSoftware.com/ForumPosts/Win10/Win10FastKeyboardRepeatFix.reg
Here's what's inside the above:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Control Panel\Accessibility\Keyboard Response]
"Last Valid Wait"=dword:00000000
"Last Valid Delay"=dword:000003e8
"Last Valid Repeat"=dword:000001f4
"Last BounceKey Setting"=dword:00000000
"Flags"="59"
"DelayBeforeAcceptance"="0"
"AutoRepeatRate"="20"
"AutoRepeatDelay"="440"
"BounceTime"="0"
The following registry file disables "Filter Keys" and returns Windows to the default settings. If you employ the above, after the next build drop I suggest running the following and see if Microsoft has fixed the problem (they've acknowledged
it and said it will be fixed in a future build).
http://Noel.ProDigitalSoftware.com/ForumPosts/Win10/Win10KeyboardRepeatReturnToDefault.reg
The above contains:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Control Panel\Accessibility\Keyboard Response]
"Last Valid Wait"=dword:00000000
"Last Valid Delay"=dword:000003e8
"Last Valid Repeat"=dword:000001f4
"Last BounceKey Setting"=dword:00000000
"Flags"="58"
"DelayBeforeAcceptance"="0"
"AutoRepeatRate"="500"
"AutoRepeatDelay"="1000"
"BounceTime"="0"
If you're at all skeptical about running downloaded .reg files from other folks (as you should be), I encourage you to use the text yourself or download them and look inside with an editor before running them.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Caps lock and num lock key problems

hi- so when the caps lock and num lock are lit my keys type lower case. when the caps is not lit and the num is lit my keys type upper case. when the caps and the num are not lit just the num keys work meaning j=1 k=2 etc... any ideas how to get back to normal? thanks patch

Try the suggestions in this thread.
(13280)

OSD for the Caps Lock and Num Lock is not appearing.

Hi all,
I recently discovered that the Caps Lock and Num Lock OSD has stopped appearing when I activate/disactivate these functions. The functions still work, just that the notifications do not pop up.
All the rest of the OSD notifications still DO work, like volume, ThinkLight, brightness, etc.
I've checked the on-screen display settings in Control Panel and found that it set to 'enable' with fadeout at 3 seconds.
I've turned it off and on to 'reset' it but to no avail.
Help, please.
Thanks in advance.

They're not supposed to show up on T400's because the indicators exist as physical indicators on the lower bezel.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

OSD indication for caps lock and num lock on Thinkpad Edge 540

Hello !You may know that the Thinkpad Edge E series have a keyboard lacking the caps lock and num lock leds.On Windows, one can have an OSD display (temporary or permanent) for these two indications.I still need to find something equivalent on Linux.So I ask : Is there a way to have such OSD on Linux ? If not, Mr Lenovo, could you port the Windows OSD on Linux ?Many thanks in advance for your answer.

I use "Keylocks Indicator" in OpenSUSE and Mint installations. Places a tell tale indicator in the system tray as well as provides on screen notification (pop up message). Check it out here... http://www.noobslab.com/2013/10/keylocks-indicator-for-ubuntulinux.html.

HP Laptop. Blank screen and caps and num lock lights flashing.

Hi,
I hope you can help me.
My laptop is the HP Pavilion DV6-1216sa, bought new in September 2009. When I turn it on, I get a blank screen, the fan is working and the wifi, volume and mute lights light up. The caps lock and num lock lights flash together, once everyone 3 or 4 seconds. Normally when this happens (it has happened throughout the life of the laptop), I turn it off and turn it back on, and it works again. However this time, the problem persists. I've tried most combinations to get the bios screen up and I've tried getting it to another screen via hdmi and VGA, but no signal received. I have tried everything recommended by the HP support website. I have checked the battery, ram, and hard drive.
Best regards,
Jay

The best cheapest fix is if you can remove the motherboard your self and send it to a refabricator who will check all the chips on the motherboard and reball the bad ones. Cost is about $60-120, closer to the bottom if you can ship them just the board but if necessary they will take the whole laptop and remove the board for you.
eBay auction for repair motherboard only
disassembly included auction
If this is "the Answer" please click "Accept as Solution" to help others find it.

My hp pavilion dv4 screen wont turn on but the cap, and num lock blink

My Hp pavilion dv4- 2145dx and my laptop screens stays black but the key board stays on like the caps lock and the number lock, the mouse, volume, and the wifi light they all turn on and so do the fans but the caps and num lock blink every second at this point i dotn know what to do can anyone help

Hi,
First, try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for a full minute. Re-insert the battery, plug in the AC Adapter and see if the notebook will start.
If it still doesn't start, is there a sequence to the 'blinks' that you can match to the table below?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Caps, Scroll and Num Lock Notification - How to disable

Similar Messages

Maybe you are looking for