Captions and no captions with multiple slideshows (a bug in idvd 6?)

Hi,
I am having a problem with the captions option in multiple slideshows, and am wondering if this a bug within idvd 6. My project has two slideshows which I created within idvd because I wanted the manual option of forwarding through your slides on tv. I have one slideshow with captions selected and the other has captions deselected. Both slideshows preview correctly in idvd, but when I burn the dvd to a disk, I either get both slideshows with captions or both without. The only way around this was to select captions for both slideshows and then manually delete the captions out of the slideshow that I didn't want them to appear. Is this a known glitch with idvd 6?

I foolishly tried this on a separate Mac on a different library, that one with 22000 images that I had not edited (since the old iPhoto would just die a slow death on that sized library).
I actually only spent the money for iPhoto 6 (iLife's remainder package did not have any compelling use for me right now) and its ability to handle 25000 images.
Well, it is faster (i.e. it does not go to sleep for 12 minutes) if I click the scroll button but the blank images problem showed up there also. And ALL of those pictures were standard jpgs and not one was from a weird camera or ever modified or otherwise tweaked if that were an excuse for iPhoto 6 misbehaving with some pictures.
VERY annoying and very strange that they would not see this in Beta testing. Assuming they do test. So, folks, if you are planning to buy iLife for iPhoto, be forewarned. I will add this to my TO BUY OR NOT TO BUY blog entries at http://imran.com/media/blog/ so people are aware.
regards
Imran

Similar Messages

OLAP on 11g and Materialised Views with Multiple Value-Based Hierarchies

Hello OLAPians
I am trying to setup Orable BIEE to report on an OLAP cube with pre-aggregated data. As OBIEE is not able to hook into the OLAP directly i have to create an SQL cubeview.
Currently i am on a 10g OLAP environment and am using the oracle sample SQL cubeview generator to create an SQLview of my cube.
The cube itself has multiple dimensions and these dimensions have multiple VALUE-based (ragged) hierarchies and dimension members can be shared across hierarchies also.
Initially i had a problem running the view generator plugin because there is a bug within it that does not finish if there are multiple value-based hierarchies present. I was able to get around this by manually editing the limitmap for the cubeview and manually creating the SQL view.
The question that i want to ask is how robust is the 11g materialised views with multiple value-based hierarchies and the sharing of dimension members across different hierarchies?
Has anyone successfully been able to create a cubeview and import it into OBIEE without the hassle of manually editing the limitmap?
A problem arises with the value-based setup whereby if the client creates a newer depth in the ragged hierarchy, i need to manually create the limitmap and the cube-view over again, and then re-map the BI Administration mappings.

The simple answer to your question,
how robust is the 11g materialised views with multiple value-based hierarchies...?is that materialized views are not supported on top of value-based hierarchies in 11g. The reason is that it is not possible to write a reasonable SQL statement that aggregates a fact over a value-based hierarchy. Such a SQL statement is necessary if we want to create a rewritable MV on top of the cube.
But I suspect this is not what you are really asking. If you are trying to set up OBIEE on top of the cube in 10g using the view generator, then you will probably want to use the "ET VIEWS" that are generated automatically in 11g. These are generated whether or not you enable materialized views on top of your cube. I am not aware of any issues with the generated value-based hierarchy view support in 11g. Members may be shared between value hierarchies and you will not need to generate or modify limit maps.

How to set WPA and WPA2 security with multiple AEs

Hi Everybody,
I have purchased a second AE and with the help of Alan Summers was able to set them all up for multiple speakers use in iTunes. In order to make them run I had to downgrade security settings to 40-bit WEP which is not really satisfying. My Airport Admin. Utility was still 4.0, so I tried 4.2 which offers the use of WPA and WPA2 with multiple AEs. Upgraded to 4.2 and switched off security settings first. Both AE are recogniced and speakers of second AE also show up in iTunes but I cannot connect to them. Since it didn't work without security settings, I didn't even try with it and went back using 4.0. All other firmware is up-to-date:
AirPort Express 6.3
iTunes 6.0.2
Intel(R) PRO/Wireless 2200BG Network Connection 9.0.3.0
Any advice would deeply be appreciated!
BTW - if it works, it's maybe the greatest sound experience I ever had. Music all over the place!!
Best regards
Roman

Found it!!
1) upgrade Airport Admin. Utility to 4.2
2) set second AE as "remote base station" and not in "client mode" (that's the clue!!)
3) follow instructions and type in MAC address of main base station
4) choose a channel (doesn't matter which one, just has to be the same on both AEs)
5) choose your personal WPA and WPA2 password (same on both AEs)
6) restart both AEs
7) enjoy the music all over the place!
Best regards
Roman

How to insert autoincrement record and query it with multiple keys

Hi all,
I am not familiar with BerkeyleyDB, I am now doing a project that needs to insert records and then query it out with multiple keys at later time. Since there is no field that can be distinct primary key, I want to user DbSequence as auto increment primary key to db, and set other index keys as secondary db, then using join cursor to do query with multiple keys.
I don't know how to use DbSequence, can anyone direct me to a example of using DbSequence as auto increment primary key?
Regards
-Bruce

I figured out the method to insert record with auto increment primary key. I listed the code block below:
char m_SeqNamePositions[32] = "MyPositions";
DbSequence *m_pSeqPositions;
m_pDBPositions = new Db(NULL, 0);
          m_pDBPositions->open(NULL, pszFileName, szFileName, DB_BTREE, DB_CREATE, 0);          // 无数据文件
          m_pSeqPositions = new DbSequence(m_pDBPositions, 0);
          Dbt key((void *)m_SeqNamePositions, (u_int32_t)strlen(m_SeqNamePositions));
          m_pSeqPositions->open(NULL, &key, DB_CREATE);
db_seq_t SeqNum;
     m_pSeqPositions->get(0, 1, &SeqNum, 0);
     Dbt key((void *)&SeqNum, (u_int32_t)sizeof(SeqNum));
     Dbt data(pRecord, sizeof(*pRecord));
     return m_pDBPositions->put(NULL, &key, &data, DB_NOOVERWRITE);
m_pSeqPositions->close(0);
          m_pDBPositions->close(0);
delete m_pSeqPositions;
delete m_pDBPositions;
          m_pDBPositions = NULL;

I have an iMac with 2 internal drives and set-up with multiple user accounts. How do I create a path to store data files on my second drive within an application?

I have an iMac with 2 internal drives and a multiple user account set-up. Hw do I create a path to store data files on the second drive within an application?

This is the Mac mini forum not the iMac forum however...
Applications written for average users like Photoshop, Word, i.e. GUI based applications provide a 'Save' dialog box which while allow selecting second drives or any drive. The dialob box initially shown might be in the simple mode but you just need to click on the triangle to show the full set of options. You should then see the different drive names amongst other options.
If your referring to an application your writing yourself then you need to build a pathname. This can be in one of two styles depending on the programming system your using. This could be a POSIX style path or a Mac style path.
POSIX = /Volumes/volname/foldername
Mac style = Volname:foldername:

Text elements and key figures with multiple restrictions

Hi,
I'd like to display text elements in my query according to the restricted key figures in it. There is a restricted key figure used multiple times with different base of restriction. (For exmple Sales in the past week and yesterday.)
KF restricted by <i>actual calendar week</i>, and
KF restricted by <i>actual calendar day</i>
When displaying text elements, only calendar week appears, however, if KF restricted by calendar week is removed from the query, calendar day is being displayed. (I suppose that both time characteristics are taken as filter values.)
Is that possible to display both filter values at once? Or at least calendar day meanwhile still having the week-based restriction in the query?
Thanx in advance,
Gabor

One option would be to not use the *MVAL keyword and load the amount and quantity in separate Data Manager package imports wherby you can easily assign the NA to the appropriate dimension. When you import amount -- assign NA to P_UNIT and when you import quantity -- assign NA to P_CURRENCY.
However I suppose you would prefer to have one import process. Unfortunately I think you will have to find an ABAP custom solution by calling the END_Routine BADI from the transformation file to deal with the currency and unit dimensions.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Using compactRIO and NI-CAN with multiple NI 9853 ports simultaneously

Here's my problem. I need to receive and log J1939 channel information on 4 seperate CAN buses IN REAL TIME. I have a CompactRIO with 2 x NI 9853 giving me a total of 4 CAN ports. Using the example "CAN Channel Receive" included with the CompactRIO I can see this is very easy to do on one CAN port using the CAN256 and CAN257 virtual interfaces in conjunction with the Channel and Frame APIs. However, I need to do this very same thing 4 times simultaneously on 4 different CAN ports and I only have available 2 virtual CAN interfaces. In order to do this on 4 physical CAN ports, I need 8 virtual CAN interfaces apparently. In other words I need a CAN258, CAN259, CAN260, CAN261, CAN262, and CAN263.
I know that it's possible to simply log the raw CAN messages and post process them to get channel information, but I'd rather not do this. I'd rather receive the CAN messages and log the channel data in real time if possible. Is this even possible on the CompactRIO and is this the only way to do it (using virtual interfaces)? Why don't the CAN ports on the NI 9853 modules show up as CAN interfaces in MAX. If they did, that would solve my problem and I wouldn't have to screw around with the virtual interfaces. What's the use of being able to use multiple NI 9853 modules if you can only utilize the Frame and Channel APIs on one of the CAN ports at a time?
Any help would be appreciated. Thanks.

Hi,
Well the driver has only one pair of virtual Interfaces for Frame to channel conversion, so you have to make changes on the cRIO part of your application.
Try to bundle all messages from all 4 ports in one stream of data and use DMA technologie to transmit the data to the host for processing. If you have one stream of data, you should be able to do the conversion with the virtual interfaces you have.
The only risk i see is the performance for the virtual interfaces. It depends on your Busload, whether or not the controller is able to convert the streamin realtime.
Hopefully you work with an R-series Board. ;-)
Attached you can find an picture for an example of bundling two ports together for receiving one stream using DMA.
Hope that helps
DirkW
Attachments:
Receive_CAN_FPGA.zip ‏41 KB

Organizing and Storing Photos with Multiple Users

I am new to the Imac and have a boat load of photos from previous PC. I have successfully migrated them to the IMAC and started using Iphoto. I also have several user accounts for the imac for the family but want to be able to share all the photos across the user accounts. What is the best way to do this without having duplicate files.
I started by coping all the photos in a Shared folder directly under the user folder that everyone has access to. I now have been in my user account and dragged and dropped in my photo library. Things seem to be working however it appears I have now two copies on my hard drive. One set in the share folder where I have originally copied them to from the pc and another set in my photos folder on my user account. I'm afraid as the other users do the same to I, we will have 3 to 4 copies... and with the number of photos I have I scared I won't have the disk space.
How else can I manage all the photos in a single location while having multiple users be able to access them.
Thanks in advance.
Jason

I also have several user accounts for the imac for the family but want to be able to share all the photos across the user accounts. What is the best way to do this without having duplicate files.
Put them in the Shared folder as you have done. Now any user can access the files. It's basic but simple.
However, if you want to use iPhoto (and it's neither necessary nor compulsory) then you need to put the Library on an external disk formatted Mac OS Extended (Journaled) and set to ignore permissions.

ISE 1.2 and ACL's with multiple ports

When creating a DACL for my groups I used the Syntax " permit tcp any 192.168.20.0 0.0.0.255 eq 22 443" for one of my acl's inside the DACL and the syntax check validated it. When I pushed it to my groups it also worked but I have heard that this type of multiple port ACL in ISE is not supported. Does anyone know if this is accurate?

Thanks for the response but it's wrong. Cisco supports stacked ports in 1.2 for wired users. They carried over 1.1documentation to 1.2 and never updated it. We have it in writing from Cisco tac.

10g rman database and archivelogs backup with multipled archlog destination

I would like to use the 10g database and archivelogs backup statetement
backup database plus archivelog;
I would like to restrict the location of the archivelogs backed out as I am multiplexing the
archivelogs
I did not find a LIKE statement and the backup database plus archivelog
Did i miss something
patrick boulay

I meant backup
I just want to restrict rman form backing up the two location using the 'one shot' 10g syntax
I used to backup using two steps
1) datafile
2) archlogs with a LIKE expression to tell Rman where to find the archlogs
1+2 with autobackup of control+spfile
the 'backup database plus archivelog ' syntax does accept a 'LIKE' expression
patrick

Dual uplinks with single 5400 and single 6509 (with multiple interface cards)

I have a single 5400 with two gige ports and a single 6509 with dual gige line cards.
What would be the best method for running them with dual connections in case an interface or line card goes bad?
Thanks in advance.

Thank you for the reply Joseph. I swear I've ran SLA on 6500's before. This box is running IOS 12.2 so maybe that's the culprit.
I found a simple way to configure both devices redundantly using administrative distanced routes pointing through a specified interface. On the 6509, the routes point to a loopback address on the 5400, on the 5400 it's configured as default routes. Like this document explains:
http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/27082-ip-static-routes.html
Seems to work like a champ.

WVC 210 and mobile streaming with multiple cameras?

I have two WVC 210 and have opened ports 554, and 5000 for one of the camera's local IPs. This is allowing me to get to that "one" camera when I put in the camera's rtsp addresss with the passcode at the end.
I was wondering is there any way to have it where I can route to both cameras? Is there a way to put the different addresses in like when you go through the browser?

I didn't see any discussions on SpiceWorks that covered this question. I'm involved in live streaming of my church's services, and we got hit by lightening 2 weeks ago. We had 3 cameras which were able to be remotely controlled by 1 Telemetrics box, and which sent video feed into a digital video mixer. Well, one of the cameras and the remote control box have died, so we are looking to replace the setup with better equipment. I'm able to run the equipment, and even troubleshoot it to an extent, but have no idea what's even out there. Does anyone have any recommendations on a setup for at least 3 remotely controllable (pan/tilt/zoom) HD cameras? The remote control could be either hardware or software based. I have no idea how much the church could budget for a new system, so a range of low-high cost options would be ideal for me to...
This topic first appeared in the Spiceworks Community

How do you get a playlist of music to work on the basic Photo App which comes with ipad 2 - to have to play the same tune over and over again with a slideshow is rubbish !

How does one get a varity of music i.e a playlist to work on the standard Photo App which is shipped with Ipad 2 when using a slideshow ?

if you have music in your library, when tapping on slideshow a menu appears - Turn on music option. when on a song should display below it - tapping it will take you to your library.
Photo App will give you access to all albums as set in settings\Photo
Camera - select camera roll - gives camera roll only but options for everything else
Slideshow timings is under Settings\Photo

Complex NAT and ACL issue with multiple VLANS

Hello Forum.
We have about 12 different VLANS behind an ASA 5515-x. One of those vlans contains a webserver and a DNS server (different machines, different IP addresses). ASDM 7.1.3
From outside the firewall, people need to be able to get to the webserver via http, https and a custom port (3390). From outside the firewall, no one needs DNS access.
From INSIDE the firewall, things are much more complicated. They need access to the DNS server from all VLANS and they need access to Webserver from all VLANS
The VLANS themselves are defined on the core switches, not the ASA The Vlan labels and network subnets increment by 5 (except in the first 5 numbers) and the VLAN subnets are equal to the vlan name. So for example VLAN 10 is on the 10.10.10.x subnet, vlan 20 is on the 10.10.20.x subnet, and so on. Each subnet is 24 bits
WHAT WORKS:
Outside_in: http, RDP work fine. Pretty sure I will be able to get https myself, so not looking for help there
Inside_in: traffic from vlan 10 to vlan 5 works fine, but I think that is in part to the any any allow rule on the vlan 10 interface. Apart from that, all vlans can get out to the web, but they cannot get proper DNS resoliution or access the webserver across vlans
I have looked at the access lists, I have looked at NATting the DNS, but it is not working, and I am not sure why. Any assistance would be appreciated

Tried that, no joy. It said that the problem was a NAT issue, but I cannot figure it out. The NAT rule looks right, but is not because it doesn't work

Spry data set and html table with multiple images

I use "Spry Data Set" in my Dreamweaver CS4 site. I need to make one html file (a product page) and all the product data comes from a separate html table.
So, I have a html table that contains the product data and the images. Each row is one product.
Column 1 contains a product name
Column 2 contains product information
Column 3 contains products thumbnail image 1
Column 4 contains products thumbnail image 2
Column 5 contains products large image 1
Column 6 contains products large image 2
This a simple example of the idea. In reality, there is lot more content.
So the actual question is that:
How can I show in the product page all the thumbnail images, but only one large picture at a time?
And when the thumbnail is clicked the large picture changes accordingly.

It depend entirely on what you want.
One way would be to show a shadow box as per http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=shadowbox&search_exchange=&num =25&startnum=1&event=search&sort=0&interim_dummy_tmpfield=&Submit= or http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=lightbox&search_exchange=&sear ch_license=&search_rating=&search_pubdate=&Submit=Search&num=10&startnum=1&event=search&so rt=0&dummy_tmpfield=
Another way is to have a master/detail area where the large image appears after clicking in the master area like this http://labs.adobe.com/technologies/spry/demos/products/index.html
You could also use tooltips as in http://labs.adobe.com/technologies/spry/samples/data_region/TooltipwithData.html.
There are many more ways, but you need to make the desicion based on the layout of your page.
Gramps

Captions and no captions with multiple slideshows (a bug in idvd 6?)

Similar Messages

Maybe you are looking for