Captions w/Transparent Background Don't Show when Published

HELP! I've put together two captivates that on some slides
contain text on which I chose transparent background. They are not
showing up at all! I'm working in v3. Has anyone else come across
this?

GeekygURL, thanks for the suggestions. I double checked all
of this once you outlined it... The text is black, on white part of
the background of the movie. There is nothing else layered even
anywhere close. and the timing is that it's due to show up with no
delay, and show for the remainder of the slide.
I've developed quite a few flash animations with Captivate,
even with the quiz functionality... I'm generally quite technically
savvy and this is just leaving me baffeled. Anything else you might
suggest?
Oh, just to add... this is only with captions with the
transparent background... the others are all showing and timing
correctly. :(
Thanks, in advance, for everyones help!

Similar Messages

Transparent background layer become black when publishing on iWeb

Dears,
I used Photoshop CS to create a pic without background. As usual I made my selection, copied it, paste it on a new file. Then a deleted the background layer (tried with or without merging/flattting the pic) and saved it in .jpg but also in .pgn
When dropping the picture in iWeb 2.0.2, everything looks great. The picture does not have a background.
But when published on .mac, the background becomes black.
I tried almost everything when formatting the pic, although the backgr remains black.
Just before I made the same with a wind turbine pic and it worked perfectly.
See on: http://web.mac.com/daniel.daplincourt/daniel.daplincourt/Vide.html
Can anyone help me plsss?
Thank you!
Daniel

I have the same problem with the black backroung on my photo. I saved it over has a png but it still has the black background when I publish it to .mac. I would match it to the background color of iweb but I have a textured background. Is there a step that I am missing when I save it out to a PNG. Any other suggestions would be greatly appreciated. Thanks

Report works fine in VS2010 but simply doesn't show when published

Problem:
Crystal Report works fine in VS 2010 but doesn't show when published to web-server, there is no error, it simply doesn't show.
Background:
Installed VS2010 on a freshly installed and fully updated (.net 4.0 is included in the updates) windows server 2003 box with production release Crystal Report 2010. Nothing else is on the server. IIS 6 is running. My web-server and VS2010 is on the same box.
I went ahead and created a new asp.net 4.0 web project called webapplication1. Thereafter, i put a few controls (text-boxes, list-boxes and so on) on the default.aspx page. Then i created a report.aspx page. This page will have the crystal report viewer on it. I went ahead and set the report up without much hassle (got how-to's from the internet). I successfully tested my web app with the built-in testing server, the beautiful crystal report presented exactly what i asked it to. There was one recurring "Sys.Application is null or not an object" hiccup that occured every time during testing when i navigated from the default.aspx page to the report.aspx page (the page the report is on). Clicking ignore or continue on the dialogue box that comes up because of the hiccup will allow testing to continue. Here's a screen-shot of this recurring hiccup.
http://i440.photobucket.com/albums/qq122/ricom_19/Testing-Error.jpg
As i've shown, testing went great, except for the hiccup. I now moved to setup a publish profile. Since my web-server and VS2010 is on the same box this seemed relatively straight forward. All the files went over except the report, i.e. crystalreport1.rpt file. I solved this by setting the build action to 'Content' in the CrystalReport1.rpt properties. I did a republish. Now i have all my files, see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Application-Home-Directory.jpg], on the web-server.
I proceeded to try to browse to my app from another computer on my network. This was successful until i tried to navigate to the report.aspx page that the crystal report is on. The the report.aspx page loaded but the crystal report was simply not on it. No errors, not even the hiccup from testing occured. Its as if the crystal report viewer was never on the page to begin with. Only when i right clicked on the page and 'view source' did i see some remnants of the crystal report viewer.
Here is the Report.aspx page when tested in VS2010:
[http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg]
Here is the Report.aspx page when published to the web-server and browsed to from another computer on the network:
[http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg]
Details of adding report to my web app:
1) Populate my dataset then write the XML schema, reportschema.xml
2) Added the crystal Report to the project then used the wizard to navigate to the reportschema.xml. Of course i had to create new connection in Database expert. see screen-shot:
[http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg]
3) I formatted the report the way i wanted it
4) Added the Crystal report viewer on the Report.aspx page
5) In the code-behind of the Report.aspx page i bound the viewer to a report document that is loaded with CrystalReport1.rpt file
see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Report-Page-Code-behind.jpg]
That's it. As mentioned, it tested fine in VS2010 but the viewer doesn't show when i publish to the webserver. I wrote a crystal report in .net about 8 years ago. Things have changed soooo much since then.
I am wondering if its a license issue? Was also wondering if it had anything to do the testing hiccup, even though research is suggestion the two are unrelated.
I've described my actions as best as i could (without getting into ridiculous detail) and have included screen-shots of relevant stages of the process. Have a look and tell me your thoughts. Thanks.

The "Sys.Application is null or not an object" issue is known, submitted for a resolution and documented in KB #1528503. Unfortunately the KB search has been down the last couple of days...
However, the issue is limited to compile time and does not affect a completed application.
Re. the viewer missing. Sounds like the viewer directory did not get created or configure correctly. Before I get to that. You mention:
"I proceeded to try to browse to my app from another computer on my network."
This bring up the question: If you run the app right on the app server. e.g.; not a client computer, does the viewer and report come up? Is this issue isolated to client computers on the network?
I suspect that the issue exists irrespective of which computer you try to see the report from - but that is an assumption. If the assumption is correct, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article on configuring the viewer. The article does not have CR4VS2010 documented, but you should be able to guide your self using the article. I think the pattern will be obvious.
Ludek

How do I get my code changes to show when published in Business Catalyst?

I have created my website using !Adobe Muse and have used the Ecwid ecomm widget to integrate a shop. As I wasn't happy with the font, colour, etc, I changed the code using the edit 'html' function, accessing the code information from a design browser mode and then further on in the process, I published it to Business Catalyst. However, now the changes don't show. How do I get my code changes to show when published in Business Catalyst? Do I need to go through the same process using Business Catalyst?

Hi,
Thank you for choosing Ecwid! To change the design of your storefront, you should go to Ecwid Control Panel > Settings > Design > CSS Themes. Find your current active theme and add all the necessary changes in a big input field that you’ll see there. To know more about how to improve your storefront design, please refer to this article http://help.ecwid.com/customer/portal/articles/1083332-how-to-change-ecwid-design
If you make changes to your CSS Theme but your storefront design remains the same, please refer to this article http://help.ecwid.com/customer/portal/articles/1149625-i-don-t-see-the-changes-i-made-to-m y-css-theme
Also, you can find a good range of articles and tips on how to improve your Ecwid store in our Help Center http://help.ecwid.com/ Feel free to use it!
If you get any other questions about CSS or Ecwid functionality, contact us on our forum http://www.ecwid.com/forums/ There we will be able to check your website and provide more specific solutions for you.

Movies with transparent backgrounds don't display in KN4

In KN4, movies with transparent backgrounds (such as the countdown timers sold by KeynoteUser.com) no longer display when the show is presented. They clearly function when creating the slide, but not during presentation. I'm running the show on a MacBook Core Duo with 10.4.10 and GMA 950 graphics chips with 64 MB VRAM. This might be an issue with the GMA graphics chip although the movies worked perfectly with KN3 and earlier. Has anyone else observed this problem?

The Keynote 4.0.1 update has fixed this problem. Thanks Apple!

Backgrounds don't show in pages from template

I made a template with backgrounds being controled by an
external CSS file; but when I make a page from the template, the
bgs don't show; anyone have an idea why?
the panel on the right sidebar
is supposed to have a drop shadow gif repeating on the y axis
I tried this in both an embedded style and with a style from
an external CSS file........can't seem to see the issue. Sometimes
I can see them locally but not when uploaded (making sure to upload
the CSS file, too)
Any help would be most appreciated.

Additionally,
http://www.ruthinstitute.org/pages/design/bgLines.gif
Referer:
http://www.ruthinstitute.org/
HTTP/1.x 404 Not Found
http://www.ruthinstitute.org/design/bgRghtColSm.jpg
Referer:
http://www.ruthinstitute.org/css/ruthMainFixd.css
HTTP/1.x 404 Not Found
Your images are in many different directories, so I'm
guessing you've
simply gotten mixed up where to find the above images - or
you actually
did neglect to upload them to the appropriate directories.
And the Web server, Apache/1.3.33 (Unix), is case-sensitive
for
filenames.
Mark "404" Boyd
Keep-On-Learnin' :)
josie1one posted in macromedia.dreamweaver:
>
> Remove the </div> here, see if it fixes your
problem
>
> <script type="text/javascript">
> 
> </script>
> </div> <-------------------------
>
> you have other problems too, see this:
>
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.ruthin
> stitute.org%2F
>
> --
> Jo
>
>
>
>
> "tbfa" <[email protected]> wrote in
message
> news:gf2s43$77q$[email protected]..
>>I made a template with backgrounds being controled by
an external
>>CSS file;
>> but when I make a page from the template, the bgs
don't show;
>> anyone have an
>> idea why?
http://www.ruthinstitute.org
>>
>> I tried this in both an embedded style and with a
style from an
>> external CSS
>> file........can't seem to see the issue. Sometimes I
can see
>> them locally but
>> not when uploaded (making sure to upload the CSS
file, too)
>>
>> Any help would be most appreciated.

How do I ensure that a semi-transparent background stays that way when converting a pptx file to PDF

I can't seem to get a semi-transparent background image when converting to PDF file. Every time I try it - the image converts to a full color - zero transparency background, muting out the text on the page.
Please help.
Thank you.

Hi LeighAnnie,
If you're running Windows, you could try setting up the CreatePDF Desktop printer.
-David

Please help me, My contract don't show when I update from iOS 4 to 5.1

Hello everybody I'm from Thailand.
I use iPhone 4 iOS 4.3 and I get update to iOS 5.1 yesterday.
Everything are done accept my contract list don't show.
I got every way for recover but it does not back.
Could anyone please help me for this problem?
I have AddressBook.sqlitedb file but can not attach it on this post.
Have anyone can export them in CSV Format?
Thank you very much, I'm don't know to get help from any one.
Best Regards,

It's a built-in app, so it can't be deleted nor downloaded from the store. If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Camera being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Bookmarks don't show when "Bookmarks" is clicked

Bookmarks no longer show when "Bookmarks" is clicked.
They are still there and accessible through the sidebar but regular drop down is emptu.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Captivate 7 Screen Captures (scrolling) not showing when published in HTML5

I am using Captivate 7 and when I publish in HTML5 my screen captures (of the screen scrolling) do not show -- I get a blank screen for a couple of seconds --, even though they show when I preview for the Web in HTML5. They also show when I play them locally, but not from my server. Here is a link to a short video that has this problem -- click the fast forward button seven times after clicking play to get to a screen scroll. http://streaming.missioncollege.org/library/media/Tutorials/Title/index.html

I was using Internet Explorer 9. This morning I tried 10 & 11 with the same results. It works fine in Chrome and on a Mac with Safari. I do not have my iPad with me today, but I tried it this weekend and had the same problem, though I just updated my OS, so I will try again. If it does not work well on an iPad then I might as well output as FLASH. I will try my iPad again tonight and report back tomorrow. Thanks.

Assignments not showing when published....

I've created a course in course manager, and have included a post with assignments, but the assignments aren't appearing in iTunes U when published public. What am I doing wrong?

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
3 - reboot.
4 - launch iWeb.
5 - delete the movie from the page and save.
6 - add the movie again and publish again.
If your page design is such that you may need to edit and republish it several times again there are other methods of adding a movie to a page that requires you to manually upload the movie file to the server ONLY once and link to it in your page. If this might be of interest to you then let me know and I'll link you to examples. These methods only load the movie when the Play button is selected allowing the page itself to load much faster.

Play button showing when publishing to responsive template

I'm having difficulties when previewing and publishing a responsive project.
Initially when I viewed the review/published project the first slide was blank and I had to use the TOC to navigate to the first page. I searched for a resolution and found a support document stating that auto play should be turned off when publishing a project in html5. I unchecked the auto play box in publish settings and the project now starts at the first slide. The issue now is that the play button displays throughout the course. Does anyone know how to remove this/change the settings? I've used Captivate 5.5 and 6 in the past and the play button has been hidden on click. Another issue is that the hand cursor doesn't appear when I hover over the button and it needs to be clicked twice before the project will start.
Here is an example...This is the first page but when I click the button it still appears on every slide of the project.
Please help.

I see the Helvetica problem on the menu
The birth card looks nice in italic, but I am sure that's not what you had intended.
Can you see whether this particular font is already in the Font Book. There might be a clash of fonts here ... Font Book and FontExplorer. Restart you Mac and see if the problem persists. But save your site first.
There is no need to re-install iWeb. This is a font issue.
I am using Extensis Suitcase
Joe
[email protected]

CONTACTS DON'T SHOW WHEN THEY CALL

Okk.,. My contacts are there. But when a person calls there name does not show up there number just show. Then once im done with the call there name shows in the call log. please Helpp!

There could be any one of three solutions... Try these:
1. Make sure you set your own country code at Phone dialer Screen > Options > Smart dialing.
Set your Country Code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
* In the US, set this Country Code as "+1", and place your local area code in the proper box (this normally the default setting in a new BB).
2. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
* For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
3. You may have "Content Protection" set on your Address Book.
Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
*If you don't see this here, your device operating system handles this differently. Look at Options > Security > Encryption.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Subreports w/ CR10 only don't show when main report has more than 1 record

I use use Delphi7 and VCL CR10 to display report of 1 master table having 2 detail tables. The database is Interbase so I just use the TTX technology. I design a report to print master record at Detail A, and insert 2 subreports to print details records at Detail B & Detail C, and arrange the subreport links succesfullly. I make Detail C "New Page After" and put a Page Footer section to display some info of master record. I hope I can see a report w/ 1 master record followed by details records in one page.
I managed to pass data from Delphi to CR10 by assigning TCrpeDS.DataPointer of each table to TCrpe.Tables[x].DataPointer (after arranging TCrpe.Subreports[x], where x: 0..2). The report works well if I only print 1 record of master table. When I supply 2 or more record of master table w/ corresponding records of the 2 detal tables, then only the first page will print well, the following pages won't print Detail B & Detail C (can't show data of detail tables).
I try to detect the problem by changing the Record Selection Formula of each subreport to "true or <link condition>". Then again only the first page will print "all" details records (the "true or .." works), other pages will only print Detail A.
Please help me w/ this issue. I thank you in advance.
Regards,
Tjioe

VCL is not Java

The updated info on my Apple Account don't show when I'm trying to purchase an item in the Apple Store

I changed my address and country, since i've moved, in my Apple Id which has been saved and i can see that when i log into my apple account online. But when I go to buy an app in the app store it is still showing the my old info. So i am unable to put in my new billing address and purchase an item. Please help?

Have you changed the payment method and billing address in your account information from the iTunes app on your Mac?

Captions w/Transparent Background Don't Show when Published

Similar Messages

Maybe you are looking for