Captivate 2 audio not showing up in Flash 8

Hello,
I'm creating a project in flash where several captivate .swfs will be loaded into a loader component. I need the captivate .swfs to have a first frame stop(); action so that they won't play until the .swf is fully loaded. So I decided to export my Captivate projects to Flash 8 and add the action...everything comes to flash seamlessly except the audio. My narration audio exists in the library but not on the timeline. The audio for mouse clicks and key taps was automatically added to a layer in flash. Does anyone have any idea why?

Nobody has any ideas for this?

Similar Messages

Fonts not showing up in Flash CS5

Maybe I'm missing something simple but I just can't get some fonts to appear in Flash cs5 on mac osx. they work fine in Photoshop / Illustrator, but don't appear in Flash.
Any ideas?

You may find something useful in one of these links:
http://forums.adobe.com/message/3238692
http://jeremy-knight.com/2011/05/certain-fonts-not-showing-up-in-flash/

Captivate 4 will not open with latest Flash Player installed?!

Hi,
I've seen this question already, but there wasn't any working answer.
When I launch Captivate, I get the warning box saying flash player "is not installed or its an older version" - with an OK button which just launches IE to get the player, and closes captivate...
I had beta player 10.1, so obviously it isn't older - but still, I uninstalled it, got the version (10.0.45.2) on the adobe page captivate sent me too and... Captivate still will not work!
I've unistalled the plugin twice, rebooted, checked the version and still Captivate will not launch...still the same message
So how on earth can I even launch Captivate?? Do I really have to roll back to flash 9 or something?? I wouldn't mind, but I don't even use IE!
Any help appreciated (esp. from Adobe!)
Cheers.

I just ran into this problem with Captivate as well. I uninstalled Flash Player 10.1 by going here: http://kb2.adobe.com/cps/141/tn_14157.html
I then downloaded an archived Flash Player here: http://kb2.adobe.com/cps/142/tn_14266.html
It seems the main installer does not incorporate the Active-X version of Flash that Internet Explorer needs. There should be several Windows installers in the download. For example, I used Flash Player 10. The following Windows files were in the package:
•    flashplayer10r45_2_win.exe
•    flashplayer10r45_2_winax.exe
•    flashplayer10r45_2_win_sa.exe
Install the first one and second. The second file is the Active-X Flash version (I’m thinking “winax” means Windows Active-X), which Captivate needs to run. I don’t think you need to install the last file (“win_sa”, I’m thinking the “sa” stands for stand-alone).

Components not showing up in Flash CS5

What's the correct way to install components in Flash CS3?
first I tried to install the NewGrounds Ad component for AS 3.0 which delivers as an .xmp file. I doubleclicked it and in the Extension Manager it's listed as active under Flash CS5. I restarted flash, but the component does not show up in the components list.
I then tried to install the minimal components from http://minimalcomps.com/ which are delivered as an SWC. I went to the ActionScript 3.0 settings in flash, went to the "library path" tab and clicked browse to swc to select the SWC file. but these components don't show up in the components list either.
So what am I doing wrong?
Thanks

1. Go to HELP > MANAGE EXTENSIONS
2. Choose Flash
3. Choose FILE > "Install Extension"
4. Install xxx.mxp from below locations one of them (you may need to show system folders on Windows to see).
5. I checked these folders on my machine but they were empty,,, but I already have components installed.
C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration
if u can't find it try to go to the below path:
C:\Users\userName\AppData\Local\Adobe\Flash CS4\ar\Configuration
and copy all files existing in this folder to:
C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration

Pixel bender parameter not showing up in flash

I am writing a pixel bender filter to be used in Flash. When I run the kernel in Pixel Bender I can see and change all my parameters (float and float2), but once exported to a .pbj and embedded in Flash I get a "TypeError: Error #1010: A term is undefined and has no properties.". I have run a loop tracing the shader data and it does not show that the parameters are there I change the version number for each export and I am surely embedding the latest version.
Can someone please tell me why this would be happening, I am totally at a loss.
Thanks,
Chris

UPDATE:
You can forget converting the fonts, here is what really helps:
Move all of your fonts from your user library to your desktop (or whereever, just make sure to remember where), basically uninstalling all your fonts.
Then put the fonts that you need & miss in FLASH into this folder: Macintosh HD/System/Fonts
Enter your user password to confirm the movement of the files into the system folder.
Restart FLASH.
Now the formerly missing fonts should show up in FLASH.
When you're done with your Flash Project, you can delete the added fonts from the system folder and move your old fonts back to your user library in order to get your sytem back the way it was.
WARNING: Be careful while in the system folder, you don’t wanna make any mistakes there. ^^
SICK that adobe is not fixing this issue which is really hell hell hell. Hope this helps you guys in the meantime.
cheers.

Updating audio not showing equalizer

After updating it is still not showing in lumia 525. I have tried it switch off and and switch on.

and some news from @adrianhughes
#Nokia updates its #Audio system utility to version 2.1.1.1

Audio not showing up in audio track editor - Logic X

Logic XI was doing everything right and then my audio quit showing up in the audio track editor. It shows in the Audio File Editor, but when I click over, having already activated "flex" nothing shows up, just the empty grid. The project is pretty big. Is my computer just refusing to do any more flex edits?
I'm working in OSX 10.9.5 on a 2009 iMac.
Thanks for the help.

You certainly have a problem if you are seeing a vertical piano keyboard in the audio editor window...
You only see the vertical piano keyboard in the Piano Roll (Midi) window....
So are you talking about editing audio or midi data.....?
If it's midi... then click the link icon so its yellow...on a brown background.. to link the midi region with the Piano Roll screen....

Help needed - Captivate 7 Audio not working in Safari/Chrome in html5

I think I am going slightly mad. For the life of me I can not get the audio to work in either Chrome or Safari (both versions are up to date) on an ipad and android tablet.
I have created a 1 slide project which just consists of a blank slide plus an audio mp3 file I have imported to the slide. I have turned off all the button click sounds and not scaled the html.
I then publish to html5, uplaod it to my LMS and try and view it. Works fine in IE on a desktop. But when I try and view it in Chrome and Safari there's no audio. In Chrome it seems to default to mute, so I unmute it but still nothing, In Safari the mute button is not even there, even through it is enabled in the skin.
Anyone have any ideas as it's driving me mad? Unfortunate thing is I downloaded Articulate storyline and after 10 mins I had uploaded a html 5 zip file and it working great on the ipad, with audio.

Hi
Sorry to hear that you are having trouble with audio in Captivate's HTML5 output.
What LMS are you using? There are certain LMS that are known to have problem serving HTML5 content. Also, the content server inside the LMS can choose to send different responses based on the client being a desktop device or a mobile device.
What is the IOS version in the iPad? IOS6 is preferrable.
Can you please try the following?
1. Instead of hosting the output in an LMS, try hosting the content in a local web server running on your machine. Mongoose is a quick and free option to try out (https://mongoose.googlecode.com/files/mongoose-tiny-4.1.exe) and then try accessing the same from iPad
2. If that works, then we can start suspecting the LMS that you are using. If it still does not work, you can connect the iPad to a Mac machine's USB port. Launch Safari on the Mac machine. Make sure that the option to "Show Developer Menu" is turned on in Safari's preferences. From the develop menu, select the menu specific to the iPad device and webpage. You may have to open and close the develop menu in case your iPad is not listed in the menu. Once you select the iPad+page menu, a web-inspector window is opened. Open the console messages if not already open. Refresh the webpage in the iPad. Look at the console output messages in the web-inspector. Any errors or warnings encountered will be printed there. For example, network error messages might hint that the http request for the mp3 file was rejected by the server for some reason.
3. If there are no messages in the console, audio does not play when published output is hosted in local webserver, then please share the published output. We can investigate why it does not work.
Cheers
Siva

Captivate 6: LMS not showing learning is "Complete" when e-Learning has actually been completed.

I've read and researched variations of this topic for the last two days before resorting to ask a new, but related question so sorry for the repetition.
My problem is that our users are using our Captivate 6 module and although they pass it, their profile does not register as complete. Once I change the settings and the LMS recognizes a class has been complete, then bookmarking fails in the course and their place isn't saved.
I've changed the Template from Default to SendTrackingDataAtEnd to help with score reporting.
Here are the settings I have tried so far:
Reporting
In Advanced:
In addition, in the Advance LMS settings area, I initially selected Never Send Resume Data, but I learned that prevented bookmarking, so I unchecked it and republished the e-Learning. However, when the Never Send Resume Data was selected, the CBT would register as completed once one viewed 100% of the slides.
There are quizzes within the CBT, however, they are not scored. The only scored quiz is at the end and the user does not need to pass: I've provided an image below just in case:
I really don't know what else to do, so if anyone could provide some assistance with this I would be very appreciative.
By the way, we are uploading the CBTs to Adobe Connect ver 9.1.
Thanks so much!

Hi Erik,
I thank you and everyone else for chiming in. I am about to do just that: set to 'User Access", because I have no idea how to correct this.
I've attempted all variations that Reporting will allow me, but nothing will seem to work. My only choice is no bookmarking, but once they complete the e-Learning module, the LMS will mark it as complete OR allow bookmarking, but the users' training area will always show Incomplete although they really completed it.
Also your comment to me on Nov 25:
"You don't explain why 'Set exit to normal after completion' is unchecked. That should be checked. 'exit' should be 'suspend' when you want a lesson to bookmark properly and 'normal' (or null) when you want it to restart every time..."
Whenever I check that box, the LMS won't show Complete although the user completed the course. I tested it and it never changed on my system to Complete until that box, 'Set exit to normal after completion', was unchecked.

Audio not streaming correctly from Flash Media Server

Our company has a Flex application (3.0.2) that is having a problem with audio dropping out in Windows 7. The problem appears worse with a wireless connection, but it can’t be consistently reproduced there, either. The only thing known for sure is that the problem has not been seen on any other version of Windows.
The application thinks the audio is playing, because it is calling the appropriate event listeners triggered when the audio completes and when any audio cue points are hit. The majority of our audio is streaming via Flash Media Server (3,0,2,201), but the problem was also seen using embedded sound effects. In one instance, several clicks of a button triggered an error saying the sound effect could not be loaded, and then about a minute later, all the sound effects played at once and the user could then continue with the application.
The problem has been repeated in IE 8, Firefox 3 and Chrome.

Thanks for your details. But i need more info.
Server:
FMS      3.0.2 ?
FMS installed in which platform Linux/windows? more details about it.
Client:
IE          7
Flash Player version     ?
WIndows 7
Wireless connection - Was the client placed in poor bandwidth.
Can you get the NetStream status info when u play the audio file.? We can check for the rebuffering happening at the client side.
Can you run your audio file through flvCheck Tool to check if the media file is in good form. It is available at "\$Root|Flash Media Server\tools\flvcheck.exe"
Now our intention should be to check the same media file with simpler application (since your production app is complicated) to ensure that the media streaming over 'client to server' is working fine.
Regards,
Janaki L

Font showing in photoshop font list but not showing in the flash font list

Hi,
I have some issues with fonts. I am using a Mac OS X and i have installed the fonts into font book.
The installed fonts are showing up in my Photoshop CS3 font list but are missing from my Flash CS3 and CS4 font lists.
I am using .otf fonts.
Any help will be really appreciated .
Thanks,

Jude,
I don't know what the problem may be, sorry.
Since the fonts are not from Adobe, you'll have to either contact the foundry from which you've licensed them or post this issue on the Flash forum at http://forums.adobe.com/community/flash/flash_general

Captivate 6 Audio not playing in preview

I have been inserting audio recordings into my Captivate 6 project slides with no problem. I inserted them, clicked play, and they worked. This morning, however, I found none of my audio would play when I click Play at the bottom of my Timeline. It will play from the slide audio window when I double click the audio. It will play when I click the Preview button under the Insert Menu. So why will it not play from the play bar under the timeline? Any Ideas?
Thanks,
Darin

Hi there
When this happens to you next time, perhaps it would be helpful to double check a place you may have clicked and not realized it. Sure, clobbering the preferences nailed it, but that's a bit like using a bazooka to kill the fly in the room.
Too late now, but my guess is that this is what happened.
If you look at the Timeline area you should see a small speaker icon as shown below:
It's easy to click this and there isn't much of an indication you have muted the slide. My guess is that you managed to click this earlier. Too bad you had to clobber preferences to get it back.
Cheers... Rick

Captivate 4 audio not playing in edit mode

In Captivate 4, if i try to playback a slide in the edit mode
(so i can time things that i want to add, like comment boxes etc.),
there is no sound. If i do a playback in the web format, it does
play the sound though, so i know that the sound did record. The
sound waves show in the edit mode, but there isn't any sound
playing back.

Hi John,
Welcome to our community. As matter of interest if you select
the audio file in the Library panel and then press the Play button
in the preview pane, do you hear the sound then? If it does, then
with the audio file still selected, click the Export button in the
Library panel toolbar and save the file to say your Desktop. Next,
delete the audio from the Library panel and then press F6 to import
the audio again. If the sound still won't play then please report
this issue to the Adobe Captivate team using the web address I have
included below.
Adobe
Captivate Feature Request/Bug Report Form
Best - Mark

Audio not showing onTV monitor - HD Startup disk fault.

In FCP5 my settings have gone awry with Default Audio showing 'everwhere' except in the Timeline Settings Audio Output where I note "Load Audio Preset" refuses to quit and let in Default Audio as my setting.
I get audio from the computer as if the View setting is not on All Frames when it actually is. The video plays quite clearly in the monitor with the audio coming from the MacPro.
Repairing and verifying permissions led me to verify HD which produced - "Disk Utility stopped verifying Macintosh HD because the following error was encountered:
The underlying task reported failure on exit. 1 HFS volume checked. Volume needs repair."
Using Disk Utility I again tried to get into disk repair for the HD. Greyed out. Used the install startup disk utility and got the same result so I now am stuck and can't finish off projects in FCP because of the audio error.
Info sent to Apple on their Feedback page. No more heard.
Help anyone.. ? T.I.A.
Ron

You ARE running v5.1 on your intel machine - correct? If not, that could be the source of your problem.
If you are running v5.1,
The first time you run FCP Attic, simply TRASH the preferences and restart the system. The program will generate new preference files with the default settings.
Once you get the application stable - then use Attic to BACKUP the known to be good prefs. If you run into corrupted preferences later, simply RESTORE back to operable versions.
Diskwarrior 4 is available but, if you are upgrading from an earlier version, it is only available on CD. It takes a couple of weeks to ship it. If you are purchasing a new version, I believe you can download and burn your own CD.
Reinstalling FCP doesn't fix as much stuff as you'd think.
Try this.
-Boot up the computer and go to System Preferences>Accounts
-Click on the '+' at the bottom of the list of accounts to create a new user account. Call it whatever makes sense but be sure to give it admin privileges.
-Log out of your current account into the new account.
-Launch FCP. Do things work as they should?
-If so, you definately have an FCP preferences issue and Attic usually takes care of these
-If not, you have other problems and should start thinking about a complete wipe of the hard drive and a reinstall of the OS and applications from scratch.
report back.
x

Podcast audio not showing up on site or iTunes

I've been searching for the answer to this for hours now. I can create a podcast via GarageBand, sent it to iWeb, and publish my site, but when I go to the page that has the blog entry for the Podcast, I can't see/hear the audio! I see the picture that I placed there in GarageBand, and the audio plays fine through iWeb, but I can't get ANY audio on the web with ANY browser, only what appears to be a picture and a QuickTime placeholder or something. Also, I subscribed the website to iTunes and that worked, but of course I can't download my first podcast. Help!
The site is http://www.thatangryblackman.com. As a warning, there is some explicit language on some of the entries there, but it's otherwise clean. But if someone can help with this, I would greatly appreciate it!
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)

It doesn't appear that you QT file has been uploaded to your server...
http://www.thatangryblackman.com/That-Angry-Black-Man/Da-Blog/53F42A4C-C43C-43DA -8749-DE409A6C8CF9_files/TABMPodcast1.m4a
It may be that the file was kicked out because your server does not handle .m4a files or maybe the FTP upload simply did not upload the file.
Check to see if you actually uploaded the movie file. Then you might give Tucows a call and ask them about their server compatibility with the .m4a MIME type.

Captivate 2 audio not showing up in Flash 8

Similar Messages

Maybe you are looking for