Captivate 2: Capturing MS Word '07 results in major document shifting

For some reason, when I'm capturing from the top of a Word
document, end the capture, then begin capturing after the previous
slide, the word document has shifted to the very bottom. Perhaps
pausing the capture will suffice,but is this a bug?
Thanks for any help,
Jeff

No Jeff, I doubt it is a "bug" ... but everyone seems to love
to use that word, so you can call it that if you wish.
When you end the recording you probably do so by pressing the
END key on your keyboard. And **MS "Word" detects the END key being
pressed and goes to the "end" of the Word document. In other words,
everything is responding to your input exactly as it should, so you
probably need to change your behavior. Try changing the "End
Recording" key in Recording Options.
That should do it, but if not, instead of ending your
recording by pressing the END key, just click the Captivate
"Recording" icon on the task-bar ... that should also cause
recording to end, but without involving the keyboard...
**(This will act the same with
any version of Word; the "2007" part is a red herring, I
suspect)
.

Similar Messages

  • Alt-F9 not captured in Word 2003

    Hi, I'm trying out Captivate 3. I'm new to Captivate, but not
    to authoring, and I took a Captivate course about 6 months ago.
    My problem is that I'm trying to capture a Word 2003
    procedure that includes the keystroke combination Alt-F9 (toggle
    field codes). Captivate appears to freeze when I press that
    keystroke combination. It doesn't capture it, and I can't continue
    - I have to end the recording session to get out of it.
    Alt-F9 is not listed as a Captivate key shortcut. Does anyone
    know what's going on, or have a work-around?
    Thanks!
    Marion

    Thanks MarionJ2, for passing that along to others.
    I would add that the Captivate shortcuts might also ignore
    the Control key (CTRL), so if function-key F9 or any other keyboard
    key is duplicated in the target application in combination with
    either the
    ALT key or the
    CTRL key, you might want to change the Captivate shortcut
    prior to recording.
    Good catch!!
    .

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

  • Why Won't My Captivate 2 capture all the frames in my webpage?

    When I try to capture a mutliframe webpage, Captivate only
    captures one frame and leaves blank the other frames. Has anyone
    else encountered this problem? Is there any solution?

    Hi pshea66 and welcome to our community
    What is the content of the frames? I just tested using
    Captivate 2 and it seems to record all frames of one frameset page
    I tested with no issues. This makes me wonder what is being
    displayed in the "missing" frames.
    Cheers... Rick

  • Does a Time Machine backup capture unsaved Word Documents? I am looking for a Word Document that I am guessing I deleted though I think it was open when I was doing a backup.

    Does a Time Machine backup capture unsaved Word Documents?
    I am looking for a Word Document that I am guessing I deleted though I think it was open when I was doing a backup.

    If you didn't save the document it would not be on your hard drive and therefore not copied via Time Machine.

  • Error message when publishing from Captivate 4 to MS Word 2003

    Is anyone else getting an error message when publishing from Captivate 4 to MS Word 2003?  I tried all 4 types and still get the following:
    "An error was encountered while publishing to Word.  Verify the following and try again.  Word is installed on your system.  Word is not busy."
    Word is installed on my system and was not in use, so I am not sure why the error.  Any thoughts?
    Thanks in advance!

    Hi there
    I use Captivate 4 and it publishes to Word 2003 without issues.
    Perhaps it has to do with the way your Word 2003 has been installed? Either that or it's a "rights" issue to be addressed by your IT propellerheads?
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • What's happening when Word opens and saves a document?

    Hello,
    I got very unspecific question, but I don't know where to start. I have an open xml document which gets generated by a third party tool. If I open the document using open xml sdk it looks VERY different from how it looks like when I opened and saved it before
    using Word 2013.
    I'm trying to get an understanding on whats Word doing! From what I've seen it's doing some remodelling on the xml file, since it looks very different (other and way more descendants than before) and I would like to achieve the same thing using open xml.
    Although this might be already to much information: The generated word documents contains html code with links to pictures. After Word has touched the file the picture is inside a drawing element, before it's not but in Word both versions look the same.
    I'm thankful for any help you can give me.
    Cheers Andreas
    Regards Andreas MCPD SharePoint 2010. Please remember to mark your question as "answered"/"Vote helpful" if this solves/helps your problem.

    Hi Cheers Andreas,
    >> If I open the document using open xml SDK it looks VERY different from how it looks like when I opened and saved it before using Word 201
    >> What's happening when Word opens and saves a document?
    This forum is discussing about Open XML developing. This is not exactly an OpenXML SDK questions. To be frank, I do not know exactly what Word opens and saves a documents either (this is the implementation details of the product).
    If you are interested on it, the forum below might be more appropriate for you:
    https://social.msdn.microsoft.com/Forums/en-US/home?forum=os_binaryfile
    >> From what I've seen it's doing some remodelling on the xml file, since it looks very different (other and way more descendants than before) and I would like to achieve the same thing using open xml.
    What do you mean by “other and way more descendants”? Do you mean that you want to add new nodes in the xml document? In my option, different objects in word have different nodes. You could refer the link below for more information about Word processing.
    https://msdn.microsoft.com/EN-US/library/office/cc850833.aspx
    If you have issues about OpenXML SDK, since it is a new issue which is different from your original issue, I suggest you post a new thread for the new issue in this forum. Then there would be more community members to discuss the question.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to do a word count on a PDF document or an original inDesign doc?

    How to do a word count on a PDF document or an original inDesign doc?

    There are scripts that will do it in InDesign. This is a good one: InDesign-Toolbox/Count Text.jsx at master · jpobojewski/InDesign-Toolbox · GitHub-

  • I am new to mac and am trying to understand how to do something i did in Word. In Word you can set up document so that you have 2 pages per 8.5 x 11 landscape page. Each page is treated as a separate page. Can this be done in word for mac 2008?

    I am new to mac and am trying to understand how to do something i did in Word. In Word you can set up document so that you have 2 pages per 8.5 x 11 landscape page. Each page is treated as a separate page. Can this be done in word for mac 2008?

    Suggest you ask on the Microsoft Mac forums since it's their software you have a question about:
    http://answers.microsoft.com/en-us/mac

  • SharePoint 2013 custom search Result Type for "Documents" not showing up as option

    I'm trying to create a custom search Result Type called "Documents" that will filter to MS Office filetypes and PDF's.
    However, when I perform a search, although many of these types of files show up in the results, I don't have "Documents" as a Result Type option.
    Here are the steps I'm following:
    From my Enterprise Search Center subsite: Site Settings > Manage Result Types.
    New Result Type.
    Name: Documents
    Source: Documents (System) - this out-of-the-box Result Source appears to cover the filetypes I need.
    Types of content: I've tried leaving it blank (to match all content) and specifically picking the types I want.
    What should these results look like? Office Document Item.
    Check Optimize for frequent use.
    Save.
    I then go back to my search center and search for a common keyword. Many in-scope file show up in the search results. However, under Result Type, I don't see "Documents," even if I click "SHOW MORE."
    Please advise.
    Thanks.
    Brad

    @Mikael As you say, to display the exact results when we click a result source, we should implement logic code to check whether item should be displayed. I have followed steps nearly the same as the topic owner but I saw nothing different between Everything
    and my custom Result Type.
    Here are the steps I'm following:
    Create a custom result type, named Job, and specify a custom display template for it.
    Set its condition to filter list items that have JobName site column ( JobName is site column's managed property) equal of any "IT" or "Doctor".
    I search for "Perter", it returns 5  items with Everything. I expect that it should return 3 items since only those items contain JobName site column.
    Search is fun but rather headache sometimes, give me advise please :)
    Thanks,
    Hoan.

  • I have a scanned doc that I copied onto a word doc.  the scanned document text was crooked.  I want to straighten the text.  How do I do that

    I have a scanned doc that I copied onto a word doc.  the scanned document text was crooked.  I want to straighten the text.  How do I do that

    If it is an image you could simply click on the image in word and then use the green dot that appears above the image to simply drag and rotate the image around. Alternatively, import it into iPhoto and use the rotation capabilities in that, click edit and then quick fixes and rotate. (Then export back into word).

  • How do obtain the number words typed in a Pages document?

    How do obtain the number words typed in a Pages document?

    I found it!  To get the number of words in my Pages 5.1 document...I clicked on the paper-icon on the far left...(at the very left edge) it gave me a selection that ended with "count words."  TaDa!  Thanks

  • Word 2013 - Work with Master Documents very slow

    Hello,
    we changed from Office 2003 to Office 2013.
    A user who creates many documentations by using master documents informed me, that he cannot work longer by using Word 2013, because extending master documents or refreshing table of contents takes long time.
    In Word 2003 it takes few seconds, in Word 2013 in takes some minutes!
    How can I improve this?
    BR, David
    David Strutzenberger

    The Master Documents "Feature"  in Word has long been broken. It remains broken in Word 2013 AFAIK. Read the linked article. There are alternatives. One of the easiest ways to lose
    tremendous amounts of work is to edit documents in Master Documents form. That you have used it this long without losing work is a minor miracle.
    Charles Kenyon Madison, WI

  • After clean install Preview and MS Word won't open any documents.

    Did a clean install of Mavericks. Restored my files from dropbox. (thousands of pdf and word files, doc. and docx)
    Now, preview and MS Word won't open any documents.
    Preview fails to open PDF so as MS Word fails to open any doc or docx file. Both crash on launch (not responding).
    The only way to open the files is renaming them.
    Try to delete the .plist (preview and Word), dont work.
    Anyone know how to fix?

    Hi Myelenium,
    Thanks for the info about Event Viewer!
    It's showing this message:
    Faulting application name: Illustrator.exe, version: 16.0.0.682, time stamp: 0x4f6e762b
    Faulting module name: AGM.dll, version: 4.26.20.19822, time stamp: 0x4f56925c
    Exception code: 0xc0000005
    Fault offset: 0x0024ed0b
    Faulting process id: 0x1a58
    Faulting application start time: 0x01cddf8abaeab2fc
    Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AGM.dll
    So I searched the forums for any previous AGM.dll posts and tried resetting the preferences (through Alt+Ctrl+Shift) and deleting the entire Adobe Illustrator CS6 Settings folder. I opened Illustrator again and moved some panels around to save a new AIPrefs folder but I was still unable to open any documents.
    Then I tried the next step listed here:
    http://forums.adobe.com/message/4687911#4687911
    And removed the Printer that I usually use and it seems like that did the trick! Yay!

  • Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

    Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
    The view stops after a while and only the Loading… (icon) can be seen on the page.
    Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
    Test the html5 version of this project at: http://kurs.dokker.no/captivate/
    and see for yourself what happends.

    I changed the Preferences/Project/Start and End  Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
    stopped like before on one of the first slides, loading… screen like before in IE11.
    In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
    In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
    In Opera 23.0 sound was missing and else working as bad as IE.
    All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
    I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

Maybe you are looking for

  • How to update the sales order header & item data in TM system

    Hi Experts, Greetings! I need your help,I have a one requirement sales order data came from ECC these sales order data need to update in TM Sales order header table as well as item table also these fields are additional fields. Can anyone please guid

  • Extra Memory Question

    Does the iphone have a microSD type card slot or something like that which will allow you to add some extra memory? Didn't see anything on the website, so I'm guessing no, but I just wanted to ask to make sure.

  • Changed IP's of nodes cause ORA-12514

    Hi , we reactivated an older RAC (2 nodes) and ran into the following situation: - the original IP's of the scan-address have been reused, therefore we had to use new IP's After confuguring the new IP's the command <nslookup> myrac-scan.de.domain.dns

  • HT1222 Security Update 2014-002 it won't allow my macbook to update. HELP!!

    HELP!! For myself to have the Security Update 2014-002 it won't allow my macbook to update. After i check the checkbox of Security Update 2014-002, it tells me to restart but i restarted about 4 times & it never really updated itself.  Can Somebody h

  • Python script in dasylab using single input multiple output

    Hello For a project, I would like to use the python scripting module of dasylab 13. I got it to work for simple functions such as y=f(x), where i have one input and one output. The next step in order to get to where i want to be with my script is usi