CAPTIVATE 2 Export Issues

I have a demo version of Captivate 2. When exporting to Flash
8 I get an error message " Unable to export to Flash 8 Call
Technical Service" After 30 minutes on the phone.... " sorry I
cannot answer that question. post your comment here.
Can anyone help????
I do own a copy of Captivate 1, and have exported to Flash 8,
but would like try this feature with the new version of
Captivate.

Hi medicineball and welcome to our community
You said:
Really what good is this product if you can't export to
Flash?
Believe it or not, this product can actually be used quite
satisfactorily without ever needing to export to Flash. I'm
guessing you are of the camp that views Captivate as simply a
"Flash add on" that is used only as a mechanism to move something
into Flash for subsequent tweaking. While this is certainly
possible, it was never the primary intent. Had that been the case,
you would see much tighter integration between the products.
Now before I instigate a long tirade about how this is Adobe
and they are huge and should make all their products work
seamlessly together, I'd like to point out that they are dealing
with a product that has had at least four different owners. So the
tight integration isn't there yet, but they are making strides.
Sincerely... Rick

Similar Messages

  • Bizzare export issue

    Here is a very weird export issue. Windows XP.
    Project is set at h264 1920x1080 mono audio 29.97 fps
    I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
    Anyone seen this before?
    Is there a setting that could be incorrect?
    -cablet

    Weird, man. Not sure what might cause that.

  • Crystal JRC PDF Export Issue

    We are experiencing a PDF export issue with Crystal JRC version 12.2.202.  The PDF report shows 1 of 3 pages but ONLY the first page is generated.  When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report.  I can't find any errors in the log that would indicate what the problem is.  To resolve the issue, I have to recycle the WebLogic application server that hosts  the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
    Any ideas on how to resolve this ?

    Hi Ted,
    Thanks for the response!
    Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
    Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
    Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
    Thanks.

  • PP CS5.5 FLV To MP4 Export Issues / Problems

    I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
    Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
    I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
    Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
    Jim

    What do you mean by a better routine?
    A better compression routine than H.264.
    Is the quality better than H.264?
    Yes.
    Does this use an MOV wrapper?
    Yes.
    Also, would it import correctly into PPro?
    Yes.
    we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
    I don't know anything about FCP.
    Sorry for all the questions, just want to get things right before diving into a new codec.
    It's harmless, and free.
    Download it and run some tests.

  • Simple flash export issue

    hello
    I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
    I have another file that I am able to export and it does not have this problem.
    They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
    Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
    Regards,
    Tom

    fixed the exporting issue.

  • Captivate 6 rendering issues when publishing flash only

    Hello,
    I wanted to ask if anybody else is experiencing the same issue as I am experiencing when I publish my captivate 6 projects:
    Issue:
    Project consists of 46 slides.  No advanced actions.  Multiple rollover images and text captions are on several slides. software capture
    When publishing to a USB or my desktop then previewing I get rendering issues and these vary from parts of the software that I am capturing not appearing at all to my master slide templates disappearing.  Whenever this happens I try publishing to flash 10 and ctick the force republish of all slides - sometimes this fixes the problem sometimes it does not.  So I try publishing to flash 9 force republish of all slides sometimes this fixes the problem sometimes it does not.  It is just so hit and miss I have to publish 4 to 5 times before I finally am successful.  So of course this is extremely frustrating when I have to make changes to the project and republish.
    Also notice that viewing in web browser has the same issue.
    Think I am going to have to go back to captivate 5.5, which is such a shame as I really love some of the new features in 6.
    Does anybody have any ideas as to why this may be happening?
    I have attached two screen dumps - one where the screen is rendered poorly and the other where I have crossed all of my fingers and toes and republished and the screen has been rendered correctly:
    Thanks
    Ali

    Hello Sankaram,
    I am experiencing the same problem as Ali, where my master slide randomly disappears in my published project. I tried the options you listed above. I also deselected "Use Master Slide Background" and "Project Background" on each slide.
    Also, I have a button on each slide (next button to move through the slides) and sometimes disappears as well. However, I can still click in that region where it should be visible, and it will progress to the next slide.
    Any suggestions?
    Thanks,
    Jackie

  • Exporting ISSUES! Help

    I am a relatively new user to lightroom.  I haven't had any exporting issues until today.  I am attempting to export a photo/photos to a specific folder with a custom name.  When I do this it exports the WHOLE library and NOT the edited photo.  What am I doing wrong??

    Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

  • Exporting issues after 4.2 upgrade

    Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

    Are you using an Export preset, or setting the Export up manually each time? 

  • Reporting Export Issue from Taleo

    Can anyone help?  We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen.   In one field we have Aggregated Agencies assigned to any particular Job Code.   In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell.    Has anyone found a workaround for this?

    is there someway that it was reformatted by the Iomega drive being daisy chained to it?
    No. That is not possible -anyway, reformatting erases everything on a drive.
    You would have noticed that first.
    You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

  • Using 128bit key Blowfish and any export issues

    Hi,
    I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
    Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
    Please let me know.
    Thanks
    RT
    Here is a sample code
    String ks = "123456789123456";
    kb = ks.getBytes();
    SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
    Cipher cipher = Cipher.getInstance("blowfish");
    // Initialisation of cipher object for Encryption.
    cipher.init(Cipher.ENCRYPT_MODE, key);

    1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
    you can read the
    'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
    section of
    http://java.sun.com/products/jce/javase.html
    2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
    3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

  • Captivate 5 export and import legend and sub title issue

    when
    i export a legend and sub title for revisiont and then import it
    i get a white text on withe background why ?
    my font on the project are white is it because of this ?
    Thanks

    let me explain better :-)
    in captivate 5 there a feature for people to export legend and sub title so some one could revise the slide text etc...
    i exprt it in word format but the doc created  we could reed the text cause the text is white on a white background
    any idea ?
    Thanks

  • Captivate 7 - Bookmarking issues with Cornerstone LMS on IPAD

    Hello,
    I am looking for some assistance with Captivate 7 (currently using version 7.0.0.118) with the Cornerstone LMS and bookmarking when using an IPAD.  We have no issues with content launching, bookmarking, and sending completions on Windows based opeating systems, but on IPAD's, with the latest version of the IPAD OS and Safari, we have no issues with launching the content and it will send back a completion, but the content will not bookmark.
    Cornerstone is stating that the Safari browser on the iPad is not properly implementing the onbeforeunload trigger, which is primarily used in courses to force a save of the course data. This event is not triggered within the iPad version of Safari, preventing courses from saving themselves when the course is closed.  We currently have our customers closing the web browser in order to exit the course on the IPAD.  We are not experiencing this issue with the HTML5 courses that were exported with Captivate 6.
    Thank you,
    Karl

    Clare,
    If you want a continuous movie (since it is simply a demo) you can use the HD Video Demo. But editing and synchronizing will be much more a pain.
    Captivate's power is just in the creation of those static slides, but I would never record narration at the same time. I create the VO after having created the simulation, that is much easier just because the slides are static. I have been choosing Captivate just for that reason, but of course it is up to you. Want to have just demo: use HD Video Demo or choose Camtasia. But you'll never have the interactivity power that has Captivate. For trainees and students, interactive simulations are much more engaging, but that is your choice. And even a 200 slides movie has only 6000 frames, and will have a much smaller filesize than a video that explains the same.
    Lilybiri

  • Animated GIF Export issues

    I have a simple Flash animation which I'd like to be made
    into a transparent GIF.
    When I do the GIF export, only the first frame of my
    movieclips (which are placed in the main timeline) get rendered. It
    seems like Flash only records the main timeline preview output into
    the GIF file, and does not play movieclip objects. You would expect
    the GIF recording to be of the same preview as when you hit
    ctrl+enter (essentially final playback).
    Because of this, the GIF export is pointless. The only way to
    use it is to have all your animations occur in the main timeline,
    and not within movieclips. It doesn't work for me (and for most
    people?), because I need to easily scale my animations, which is
    doable by just resizing a movieclip.
    Is there a way around this in Flash? Am I missing something?
    I've had to use a 3rd-party tool (Magic SWF2GIF) to do the
    GIF recording.
    My other issue is Flash cannot export transparent GIF's it
    seems. Because of this, I have to rely on more 3rd-party GIF tools,
    most of which are rubbish.
    In the end, I've had to take snap shots of every individual
    frame and edit each frame as individual files in Photoshop to do
    all the cropping and transparency just right. Real pain when you
    are talking 50 frames, and having to do multiple animations.
    Is there a way to export transparent GIF's in Flash?
    Seems kind of dumb that I have all this high-end software and
    loads of tools... and I still have to edit things frame by
    frame.

    Thank you for your reply!
    I check exported GIFs in various browsers and XnView viewer.
    It's definitely not a preview  issue - i have 32Gb of RAM and Nvidia Quadro 4000 GPU on my system.
    I believe the issue is with transparency, because i'm able to export GIFs with solid background just fine
    GIF export dialogue window has 'Transparency' checkbox, so it looks like it should be possible to export an animated GIF with transparent background, but for some reason i'm getting all frames at the same time
    thank you

  • Regarding web analysis data export issue

    Hi all,
    Iam new to web analysis we had a issue on one of the report
    I can open the report and i can work perfectly on the report but when i export the data to excel its showing up as fallowing error
    FATAL ERROR: gui report is inccorect
    In the same application i have some other reports those are working fine and data is being exported to excel for those reports
    What might be going with that report Please let me know if you have any ideas.
    Thanks,
    Ramesh

    As report was exceding 65000 records we have modified the report by adding the pages and reduced the count of output records. So the issue was resolved.

  • Media encoder cc export issue

    i got a user that have issue export with media encoder
    when she encode she get this error
    any idea
    Thanks

    Any one ?

Maybe you are looking for