Captivate 3 - Getting playback skin and presentation on same file when publishing

When I publish I am getting two different files - one for the skin and one for the preso. The skin files shows the skin w/o preso and the preso file plays fine but w/o the playback skin. How do I publish in order to get both on one playable file?
Thanks for your wisdom
JC

Hi there
In addition to what Lilybiri offered, try clicking Project > Skin > Borders tab and DE-selecting the "Show Borders" check box.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How to get list of drives present in local file system?

Hi all,
I want to show all drives and their contents using JTree.
Does anybody know how to get list of drives present in local file system?

Thank you!
I have new question.
I want to disply size and file type. Can you give ur suggestion in order to do that?
I want to provide following using JTree
+ root <Dir> 50KB
- file1 <txt> 10KB
- file2 <bmp> 20KB
+ root2 <Dir> 200KB
-file1 <jpeg> 50KB
Is this possible?
Plz reply..........
bye

Write x y position and voltage to same file

Hi,
I've been writing a program to perform a 2D scan with stepper motors. There are actually 3 in the program but only 2 perform the scan. I have used a subvi to take 10 voltage measurements at each position in the scan. What I'd like to do is record the X and Y position for each set of 10 voltage measurements. I'm fairly sure I can record the position with the 'GetPosition' function for the motors, but am a little lost on how to get them to write to the same file, and whether or not those positions would correspond to the voltages taken there. I have included my vi and the subvi used for reference. If anyone has any suggestions on this problem I'd greatly appreciate it.
Cheers
RJ
Attachments:
xyz scan 015.vi ‏116 KB
Keithley 2000 Read Multiple.vi ‏44 KB

rjwilliams wrote:
... I'm fairly sure I can record the position with the 'GetPosition' function for the motors, but am a little lost
on how to get them to write to the same file, and whether or not those positions would correspond to the
voltages taken there.
Well, this is a bit too diffuse. You seem to be writing to a file, but the code is nearly incomprehesible from a dataflow point of view.
If you are not sure if the file contais the correct values, just run the program, proble the wires, and look at the file later. You should be
able to tell if the are correct or not. Why should they be different? What values do you expect? What values do you get?
I agree with Ray that you NEED to cleaup the code in order to troubleshoot. Your code is just a bewildering jumble of code fragments,
trapped deep inside stacks of while loops and event structures, all tied together with confusing logic. All you need is a simple state
machine with one while loop containing one event structure.
Message Edited by altenbach on 07-07-2008 07:48 AM
LabVIEW Champion . Do more with less code and in less time .

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

Hi, I need Photoshop Organizer to stop automatically start and try to organize files when I insert a card in the reader. How do I do that?

Hi, I need Photoshop Organizer to stop automatically start and try to organize files when I insert a card in the reader. How do I do that?

Hi,
Which operating system are you running on?
Which version of Photoshop Elements are you using?
The automatic running is usually invoke by your operating system. For instance in Windows 7, go to the control panel and select Autoplay. There, look for the action when pictures are detected - it is probably set to elements. Set it as you want.
Brian

Foxit reader is default PDF reader and presents a blank page when asked to show a PDF document.

I use Mozilla Firefox and Foxit Reader as my default PDF reader. I go to a web site that has a click-on to a PDF document. Mozilla opens a new tab and presents a blank page with the word "done" in the bottom left corner. The address bar shows the called up document, but no document shows.
How do I correct this?
If I go to IE which calls on Adobe, the document comes up fine.

Things are still not right online with Wells Fargo/Adobe pdf's. I have uninstalled all versions of Adobe Reader, AIR, and Flash Player, and have downloaded the new versions. I did the flash player a few minutes ago when trying to watch a YouTube video sent via email and I received a prompt telling me I needed to upgrade Adobe Flash Player.When I access the list of Bank statements for what I call my main account ( I have two checking, two savings, and one Visa accounts with this bank) the list of ten or so monthly accounts for this "main account" appears. I can click on any one of them, get a blank pdf, click on the refresh button, then the pdf appears; one of the savings accounts is on this same statement.
If I bring up the other checking account or the other savings account, the only entry on the monthly list that pertains to that account is the second one on the list. All the other months are still from the "main account". I can bring up any of those monthly pdf's via the refresh button route.
The Visa account monthly list is good, but I have to click on refresh to view the pdf.
The pdf statements from US Bank work fine.

Setting up new imac on network using dhcp nut not getting a valid ip address. Same happens when I try to connect via wi-fi. IP address being assigned is 10.45.190.195

Have new Imac that I'm setting up. Company is using DHCP to manage IP addresses. Mac is plugged into netgear hub along with a PC. Mac is getting an invalid IP address of 10.45.190.195. PC is working fine. I've powered the hub on and off. I've renewed th DHCP lease on the Mac many times but IP address always comes back as 10.45.190.195. I've plugged the network cable directly in the network port bypassing the hub. Same result.
Having the same issue when trying to connect via Wi-Fi,
Anyone experiencing this issue?

I see what you are saying. When I lived in the dorms, I was set up in bridge mode because we had that type of modem. My question now is do I distribute a range of static IP's or share a public? Either of these settings give me errors where the starting and ending DHCP addresses conflict. I use 10.0.1.1 and 10.0.1.100 and this error no longer seems to persist, but then I am not able to connect to the internet and the amber light keeps flashing- along with my computer showing that I am still connected to the TM.
Thank you for your support so far.

Getting channel units and length from .dbc file

Can any one help me out. I was wondering how to get Channel units and channel size from the CAN db file similarly like getting channel names from Get Channel Names by Id vi.
Thank you,
Shanth.

can you pls guide me to use this vi for my application
i want to read the dbc using NI CAN 8473
i am getting error
Attachments:
USBCANBasicInput.vi ‏43 KB

Will InDesign CS6 and CC have same file format?

Hi all...
A fairly simple question: Do anybody know whether InDesign CC will retain the same file format from InDesign CS6, so you can open files made in both application. Say you subscribe to CC and work for somebody who one have CS6? Will you did be able to use files without any issues?

Thanks for the quick reply, Peter.
If InDesign CS6 is indeed included - and I have read the same thing - it will do.
It is a bit of a mess that the file format change from version to version, especially now when the CC apps is just going to be called CC and is always updated to the latest version. Eventualy we might have to work with CC 1.0, CC 1,5 and CC 2.0 files unless Adobe have some kind of brilliant solution. Oh well....

I want to run my program with continuous aquisition and write data to file when a button is pressed and get the most recent samples from the DAQ board.

This is an update to a question I asked earlier. I am still trying to solve the problem. I have included a zip file with a library file. The file to open in pj_pushbutton.vi. I have placed comments explaining the issues and problems in this vi and the subvi's.
When I push my button to write the data to file I think it is writing the data that has already been stored in the buffer and writing to file all at once. I want the data that is taken from the DAQ board from the time that I press the Write File button. How do I do this?
Attachments:
pj_pushbutton.zip ‏692 KB

Hi,
1. In AI read, you need to set the Read/Search option to "Relative to End of Data".
2. Next you should not start AI Read VI until you press the Write to File. I am attaching an example VI below. Please see if it helps.
Regards,
Sastry V
applications Engineer
National Instruments
Attachments:
MostRecentAcquiredData.vi ‏97 KB

CS6 OS X and Illustrator creates temp files when saved

Hello all,
First time to the forums, did a search and couldn't find anything, called customer support they didn't have an answer, and they directed me here.
We recently upgraded from CS5 to CS6 for OS X(Snow Leopard). Now, when our users open a file and save it, the file is saved, but along with the file, a temp PDF file is also saved in the directory. So needless to say, if my user makes 10 changes to the file, there is the original and 10 temp PDF files in the directory.
We never experienced this with CS5, and I'm not sure where to look, our environment has been unchanged with the exception of the upgrade.
All the files they are working on are on a Netapp NAS device, and only one person is working on a file at a time.
any help is appreciated.
--nixIT
EDIT: Anyone? Any ideas?
Message was edited by: nixIT77

Back up all data.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Select the text on the line below by dragging across it. Don't include the blank space at the end of the line.
sudo chmod -R -N
Copy the selected text to the Clipboard (command-C). Click anywhere in the Terminal window, then paste (command-V). Press the space bar.
Now switch to the Finder and and select the item(s) that are causing the problem. Drag the items into the Terminal window. More text will be added to what you entered.
Click in the Terminal window to activate it, then press return.
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal.
Test.

I get "program error" or "wrong kind of file" when attempting to open RAW (.NEF) files from my new Nikon D7100. Works fine with Nikon D80. What do I need to do?

FYI, I am on Elements 9.0.forumnotifier

Each time a new camera model is introduced the camera raw plugin has to be updated for its format. The D7100 requires ACR 7.4 which is not compatible with PSE 9. So you have three options:
1. Upgrade PSE.
2. Use the nikon software to convert your files and open the converted files into PSE for further editing.
3. Download the free Adobe DNG converter and use that to convert your NEFs to DNG files that your version of ACR can understand.

. Try saving to disk first and then opening the file. when I download

C:\Users\howie\AppData\Local\Temp\incredimail_install-12.exe could not be opened, because an unknown error occurred.
Try saving to disk first and then opening the file.

Did you try saving to disk first and then opening the file?

Spry horizontal menu bar and accordion panels not working when published

Hi,
I'm a newbie to Dreamweaver and have been asked to design an intranet site. On the site, I added both Spry widgets for a horizontal menu bar and an accordion panel. Both of these widgets work in preview, however, neither work when I publish. I uploaded the Spry asset folder (with all the CSS and JS files) to the remote server, but still no luck. What am I missing?
Thanks.

Despite of what you have staed, my bet is on the fact that the SpryAssets folder and/or the included files are not being found by your page..
Open the site in FF, click on view Source and in the source code click the link to the JS file. If it can be found, it will show the content of the file and you will have the satisfaction of knowing that the page can find the file.
If it does not show the content, you need to correct that.
Good luck.
Ben

Captivate 3 - Getting playback skin and presentation on same file when publishing

Similar Messages

Maybe you are looking for