Captivate 3 locks up when using tablet function

I have been trying to use cap 3 on my tablet to show math
problems and it locks up and have to reboot to regain tablet
functionality. Anyone else experiencing this problem and do you
have a solution
bob

When you install a MXI-3 card in the PC and the PXI chassis, there is a MXI Initialization disk that you get which installs the MXI-3 Optimization program on your PC, which must run on bootup of the PC.
Also, your PXI chassis must be powered on FIRST before your PC is powered up.
Have you done both of these tasks first?
Mark

Similar Messages

  • When using TODATE function MDX query is not correctly generated

    Essbase 9.3.1.2 and OBIEE 10.1.3.4.1.
    When using TODATE function MDX query is not correctly generated.
    This leads to unexpected values not only on cumulative columns in report (generated with TODATE), but also other columns (calculated with AGO function or directly read from cube) have incorrect values.
    The problem occurs when you filter on a column that is not in the select list. If you filter on just one level of dimension, results are fine. You can filter on multiple dimensions as long as you filter on just one level of each dimension.
    If you filter on two or more levels of one dimension, than results are not correct. In some cases results for TODATE column are all zeros, in some cases it is a random value returned by Essbase (same random value for all rows of that column), and in some cases BI Server returns an error:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Network error [10054]: Cannot Send Data (HY000).
    Here is generated MDX code:
    With
    set [Grupe proizvoda2] as '{[Grupe proizvoda].[N4]}'
    set [Grupe proizvoda4] as 'Generate([Grupe proizvoda2], Descendants([Grupe proizvoda].currentmember, [Grupe proizvoda].Generations(4), leaves))'
    set [Segmentacija2] as '{[Segmentacija].[RETAIL]}'
    set [Segmentacija4] as 'Filter(Generate({[Segmentacija2]}, Descendants([Segmentacija].currentmember, [Segmentacija].Generations(4),SELF), ALL), ([Segmentacija].CurrentMember IS [Segmentacija].[AFFLUENT]))'
    set [Vrijeme3] as '{[Vrijeme].[MJESEC_4_2009]}'
    member [Segmentacija].[SegmentacijaCustomGroup]as 'Sum([Segmentacija4])', SOLVE_ORDER = AGGREGATION_SOLVEORDER
    member [Accounts].[MS1] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],2,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
    member [Accounts].[MS2] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],1,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
    member [Accounts].[MS3] as 'AGGREGATE({PeriodsToDate([Vrijeme].[Gen2,Vrijeme],[Vrijeme].currentmember)}, [Accounts].[Trosak kapitala])'
    select
    { [Accounts].[Trosak kapitala],
    [Accounts].[MS1],
    [Accounts].[MS2],
    [Accounts].[MS3]
    } on columns,
    NON EMPTY {crossjoin ({[Grupe proizvoda4]},{[Vrijeme3]})} properties ANCESTOR_NAMES, GEN_NUMBER on rows
    from [NISE.NISE]
    where ([Segmentacija].[SegmentacijaCustomGroup])
    If you remove part with TODATE function, the results are fine. If you leave TODATE function, OBIEE returns an error mentioned above. If you manually modify variable SOLVE_ORDER and set value to, for example, 100 instead of AGGREGATION_SOLVEORDER, results are OK.
    In all cases when this variable was modified in generated MDX, and query manually executed on Essabse, results were OK. This variable seems to be the possible problem.

    Hi,
    Version is
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
    PL/SQL Release 10.2.0.5.0 - Production
    CORE    10.2.0.5.0      Production
    TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
    NLSRTL Version 10.2.0.5.0 - Production
    Sorry, in my last post i forgot to mention that i already created a function based index but still it is not using because, there is a UNIQUE constraint on that column.
    Thanks

  • 10.9.4: Graphical errors when using OSX functions like Mission Control, Spotlight

    Device: MBP 15" Retina 2.3 GHz Intel i7
    OSX: 10.9.4
    Monitor: 27" Thunderbolt Display
    Issue: When using OSX functions like Mission Control (Expose) and spotlight, I frequently get graphical errors that remain on the desktop unless I reset the computer. I can resolve the issue by adding a new desktop and dragging my windows over.
    This happens almost every day.

    You have installed all these non-Apple system modifications:
    Kernel Extensions: ?
      [loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
      [loaded] com.nvidia.CUDA (1.1.0) Support
      [loaded] com.promise.driver.stex (5.2.7 - SDK 10.9) Support
      [not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
      [not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
      [not loaded] com.wacom.kext.pentablet (5.2.6) Support
      [not loaded] com.wacom.kext.wacomtablet (6.3.8 - SDK 10.9) Support
    Litlle snitch has been a bad actor for some users.
    You do not have any CUDA Hardware, so the CUDA Driver is not needed.
    I do not know what siLabs driver thinks it may be driving.
    You left the door open:
    Gatekeeper: ?
      Anywhere

  • How do I lock safesearch when using BING

    how do I lock safesearch when using BING search engine

    I assume you're using the "Content Aware" option for the Spot Healing brush.  It can be a maddeningly stupid option -- there's no telling from how far away it will pull the replacement pixels and will leave streaks that can be very difficult to remove.
    It would be best for you to include a sample image that's giving you the problem so we can suggest the best way to attack it.
    In general, the "Content Aware" option works best when you use a very small brush size.  That pulls in pixels closer to the area you want to heal.  If you get streaks, sometimes you can use the Spot Healing brush to get rid of them by going over the area in a perpendicular direction to the streaks.
    Ken

  • Unalbe to delete lock entry table using Dequeue function module

    Friends,
    I display a base ALV list with custom app. tool bar. When i click on a button, i submit another report which updates a z-table for that corresponding row. I create a lock object for this entry before submitting the report. After updating the table, I try to delete the lock object using dequeue function module in the called report, but though the subrc is 0, the lock entry is not getting deleted in SM12. The called report, after dequeue, again submits report 1 (the caller). So, when i try to do some operation for the same row which I first selected, it triggers Foreign_lock exception. When I completely go out of the base list, only then the entry is deleted. Can anyone tell me the reason? I have tried with parameters _SCOPE & _SYNCHRON, but same result.
    Regards,
    Sathish R

    Hi,
    The triggering of the dequeue is not in the proper position as it need to be placed.
    Thats the only problem as per u have described the issue.
    Place the deque as soon as the report is return the value.
    I hope it may work ur issue.

  • How do I turn off the requirement to press control when using a function key

    When using my wireless keyboard, it requires me to press controls to use the function keys (F3, F5, F70.) However, this makes it so some of my games controls won' work,(For example, in Minecraft I can't access the debug menu.) Is there any way to disable this.Thank you for your support

    Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
    1. Triple-click anywhere in the line below on this page to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info in Finder (or just Show Info)
    from the contextual menu.* An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • Machine freezez/lock ups when using password protected certificates in IE 11 Windows 8.1 Pro

    When using certificates that have a password enabled and private keys we find the machine hangs up competly with the memory usage jumping to 99%. The main process being the Local Secuirty Authority Process that causes the machine to lock up. The work
    around we have is to remove this certificate and import a new certificate making sure we un-tick the check box for private key password.
    Not sure if this
    KB2813237 is linked, but this hotfix is available for Windows 8.1 Pro OS.

    Hi  Simon,
    You can try that suggestion and check whether it is solved and give your result, if there is any other issue, you can post it back.
    Regards
    Wade Liu
    TechNet Community Support

  • OpenCV SEGFAULT when using imshow functions

    Hello,
    recently, when I run my OpenCV application on archlinux, I get a segfault when using  OpenCV's imshow() functions for displaying the video output. This still worked some weeks ago and I did not change my code since then.
    The error is related to GTK+ which causes the segfault after OpenCV uses the gtk_init() function.
    This is the stacktrace:
    #0  0x00000000006328a0 in signal ()
    #1  0x00007ffff1dff264 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
    #2  0x00007ffff1524427 in g_option_context_parse ()
       from /usr/lib/libglib-2.0.so.0
    #3  0x00007ffff1dff80e in gtk_parse_args ()
       from /usr/lib/libgtk-x11-2.0.so.0
    #4  0x00007ffff1dff869 in gtk_init_check ()
       from /usr/lib/libgtk-x11-2.0.so.0
    #5  0x00007ffff1dff899 in gtk_init () from /usr/lib/libgtk-x11-2.0.so.0
    #6  0x00007ffff6a1fa38 in cvInitSystem ()
       from /usr/lib/libopencv_highgui.so.2.4
    #7  0x00007ffff6a20163 in cvNamedWindow ()
       from /usr/lib/libopencv_highgui.so.2.4
    #8  0x00007ffff6a20cfd in cvShowImage ()
       from /usr/lib/libopencv_highgui.so.2.4
    #9  0x00007ffff6a1c7f7 in cv::imshow(std::string const&, cv::_InputArray const&) () from /usr/lib/libopencv_highgui.so.2.4
    #10 0x00000000004187e0 in StereoMatrix::displayImages (this=0x7fffffffd6ff)
        at /home/user/mtdev/src/StereoMatrix.cpp:51
    #11 0x000000000041861a in StereoMatrix::generateStereoMat (
        this=0x7fffffffd6ff, input=..., resizeMat=false)
    I'm running the recent version of OpenCV from the repositories:
    extra/opencv 2.4.6.1-3
    Apart from that my system is also up-to-date.
    Can anyone reproduce this error or has an idea what causes it?
    Thanks

    Hi Thanks for the response
    Still beavering away at this but have made sizeable progress since this post.
    First off I ma looking for solutions within CVI and not LabView but I often find that if there is a solution in Labview then there is often one in CVI so my question becomes.....does Labview allow for capture of a 10 bit image? That is my biggest stumbling block.
    My solution so far involves writing a C wrapper dll for the existing C++ SDK that is supplied with these cards in Visual studio then using it within CVI.
    This works but has been allot of work and as disappointed as I would be to find that there is a simpler solution I would be happy to simplify the code involved in my overall project - and also to put details of the best solution on the forums for others that may be trying to do the same thing!
    Another disadvantage to the curretn method is it is a little slow - I am constantly looking at way of speeding up aquisition of the images. I have no solid numbers but I'd estimate I am working in the region fo around 10 frames a second when working with 10 bit images.
    For 8 bit images the best solution I have found is to make use of the IPP library that is provided by Intel. This hasgreat functions for taking the raw data from the card and presenting it in various ways at high speed. I have written 1 application with this that pulls the informaiton in real time but only at 8 bit as unfortunately there is no 10 bit option.

  • DBMS_XMLQuery behavior when using stored function within cursor select

    Consider the following SQL Statement
    select t1.id
    , t1.name
    , cursor ( select t2.id
    from tab t2
    where t2.t1_id
    = t1.id
    and validate(t2.xyz,:bd1)
    = 1
    from tab t1
    where t1.id = :bd2
    DBMS_XMLQuery is used to create a context and to bind the appropriate values. In this case 'validate' is a stored function. I get the following error message upon execution:
    ORA-29532: Java call terminated by uncaught Java exception:
    java.sql.SQLException: Missing IN or OUT parameter at index:: 1
    Issuing a similar statement in SQL*Plus works fine. I was wondering whether this is a known issue when using a stored function in the cursor select statement in the context of DBMS_XMLQuery or whether I'm doing something wrong.

    Hi Jan,
    This problem has been identified and fixed. The fix should be available in the next release. Thank you for bringing this up to our attention.
    visar

  • ESB problem when use merge function in master/detail relationship

    I have some problem with the merge function in database adapter.
    details:
    I have 2 tables in master/detail relationship, both have GUID column as a primary key (GUID generated by ESB).
    'car_group' table
    pk : guid
    unique : group_no, datadate, datatime
    ===============================
    guid, group_no, datadate, datatime, group_detail
    ===============================
    1, 1, 01/01/2008, 09:00, groupdetail01
    2, 1, 01/01/2008, 10:00, groupdetail02
    'car_group_detail' table
    pk : guid
    fk : car_group_guid link to car_group.guid
    ==================
    guid, car_group_guid, detail
    ==================
    1, 1, detail01
    2, 1, detail02
    3, 2, detail03
    4, 2, detail04
    I used a file adapter as a input, here is an example text file
    M, 1, 01/01/2008, 09:00, groupdetail01
    D, detail01
    D, detail02
    M, 1, 01/01/2008, 10:00, groupdetail02
    D, detail03
    D, detail04
    Because I used merge function so I need to specify the columns that will be a condition for the insert/update,
    but I have generate GUID as a primary key in the tables, I can't used it, so in toplink I map my unique key as a primary key.
    The insert operation work fine but when update is required (for example, try to change 'group_detail' column of the master table in text file),
    an SQLException thrown, the log file shown the adapter try to update the GUID column of master table but the constraint not allowed.
    And yes, cause of GUID generate everytime so ESB try to update this column also, but I don't want to do like that, I need something
    like when update operation required, just ignored the GUID column.
    I try to mark read-only to the GUID column in Toplink mapping file but still have the same problem, it still generate UPDATE statement
    with the GUID column, and also I try to let the database trigger to generate GUID instead of ESB function, but it not works in master/detail
    relationship (I think the Toplink manage the relationship, is it right ?)
    Please advise, thanks for advance.

    somebody please help, thanks !!!

  • PROBLEM when use topN function  - Essbase connection

    Guys,
    please help me. I'm trying to rank a number of clients using TopN function by revenue but when i order my Top 10 the Analysis log out. And always when i log in again continue logging out...
    U guys can help?
    Tnks,
    Lucas

    Please go to http://zone.ni.com/reference/en-XX/help/371361B-01/lvtextmath/msfunc_classes/ and see if "saveas" is an available function in LabVIEW MathScript.
    As a matter of fact,I do not see the need to complete the file I/O inside the MathScript node,Why do you want to do that?

  • Processor locks up when using Firefox, help!

    I am still new to the Mac world and need some help.
    I have a 2009 Macbook, with Mac OS X, 10.6.8, Processor is 2.26 and memory is 4gb.
    I've noticed lately that when using Firefox I seem to have lock up issues and I can't click anything. The rainbow processor thing just keeps running and running. Often times I cannot even click the Apple icon in the tool bar in order to get to force quit. (I don't know what buttons to push for force quit)
    The only way to solve the problem is to hard boot the computer and I know that is not a good thing to do. What is going on with the processor as to why it gives me hang ups when using Firefox? I have about 5-6 windows open and each has about 7-8 tabs open.
    Should I upgrade to Mountain Lion? Will that help? Again, any advice or assistance you can provide will be greatly appreciated, keep in mind I am not a techie kind of person, so simple terms will be best.
    Thanks Apple community.

    Ever since I downloaded v12, my computer has been locking up at least twice a DAY. I have uninstalled and reinstalled everything, including Firefox itself, as well as Adobe, and all the plug-ins associated with the application. I've run Spybot, C-Cleaner, and my anti-virus to confirm that there's nothing else wrong with the computer outside Firefox. If the computer is rebooted and Firefox is not opened, the system is fine. But once Firefox has been opened - even if it survives the session and I close Firefox - the computer is about 75% likely to lock up, requiring a hard reboot. I'm running Vista Home edition (32 bit). If anyone has a clue what might help stop this - because I'm quite sure that it's not healthy for my computer to be hard rebooted twice (or more) a day - I'd love to hear it! It's getting waaaay more than annoying, enough so that I'm ready to move to another browser to stop the problem.

  • Error when using CONVERT_OTF function module

    Dear Friends,
    In many of our reports we are using the function module CONVERT_OTF to send the output as a mail the users.
    But after the latest patch update we have came across a new problem. Mail is getting triggered and we can also see the icon or
    the file in mail. But when we are opening the file we are getting the message that "THERE WAS AN ERROR OPENING THIS
    DOCUMENT. THE FILE IS DAMAGED AND COULD NOT BE REPAIRED.
    Earlier this program has been working fine from last 2 years but after updating the patch in the of August 2009. This problem we are
    facing. All our mails are not working.
    Thanks
    Vamshi
    Edited by: Rob Burbank on Sep 7, 2009 3:12 PM

    Dear Clemens,
    Thank you for the immediate response. I have checked the program in Debug Mode. When we are passing the data to the CONVERT_OTF the output table of the function module is showing the data in some Unicode format in the tables OTF and LINES.
    Out of the FM is in completely special characters and this is after updating the latest patch.
    We are using Release 700 Level 19 and Service Package SAPKA70019.
    Thanks and Regards
    Vamshi Sreerangam
    Edited by: vamshi sreerangam on Sep 8, 2009 5:54 AM

  • My computer locks up when using Firefox

    When using Firefox my computer periodically locks up. My screen goes blank and everything is unresponsive. I have to to a hard reboot to get my computer back up. I'm using a 64 bit version of Windows 7 and I have the latest version of Firefox installed. I typically don't use any of the plug-ins.

    Ever since I downloaded v12, my computer has been locking up at least twice a DAY. I have uninstalled and reinstalled everything, including Firefox itself, as well as Adobe, and all the plug-ins associated with the application. I've run Spybot, C-Cleaner, and my anti-virus to confirm that there's nothing else wrong with the computer outside Firefox. If the computer is rebooted and Firefox is not opened, the system is fine. But once Firefox has been opened - even if it survives the session and I close Firefox - the computer is about 75% likely to lock up, requiring a hard reboot. I'm running Vista Home edition (32 bit). If anyone has a clue what might help stop this - because I'm quite sure that it's not healthy for my computer to be hard rebooted twice (or more) a day - I'd love to hear it! It's getting waaaay more than annoying, enough so that I'm ready to move to another browser to stop the problem.

  • Ipod Mini Locks Up When Using It With A JVC KS-PD100

    Since I've updated my iPod mini to the latest version of the firmware it locks up when I use it with my "Made For iPod" JVC KS-PD100 adaptor.
    This allows me to connect my ipod to my JVC car head unit and control it via the head unit.
    It worked perfectly when I had the old firmware on the iPod, but now I have updated it to the latest version (after a warranty repair) I get the JVC logo appear on the screen and it all works fine with the head unit, but when I disconnect the iPod, the controls are still locked up. I then have to force a re-boot of the ipod to be able to use it again.
    I've tried to download an older version of the ipod updater, but all the links I try give me the latest version of the updater when I come to install it.
    My questions are
    1. Has anybody else had this problem?
    2. Are apple aware of it?
    3. I'm guessing it's a software problem, or have I geen given a duff rarranty replacement?
    4. Where can I get a copy of the older ipod updater - preferrably the october version?
    Any help would be most appreciated as I've e-mailed apple and had no reply at all!
    Thanks
    Ross

    I've tried that already - but then the iPod is connected to the sterio, the iPod controls are disabled so I can't switch it off at all.
    If I disconnect the iPod before turning the sterio off, the ipod stays playing until I reboot it
    It worked perfectly on my old ipod with the old firmware, if I turned off the sterio, the JVC logo woulds disappear, the ipod would be paused and use of the clickwheel controls would be returned automatically.
    I'm guessing it's a bug in the latest iPod firmware

Maybe you are looking for