Captivate 3 not saving SCORM manifest

I'm trying to use Captivate 3 to create a quiz to upload to
Moodle. I've added grading to each question, enabled reporting for
SCORM 1.2 - and all the other settings appear to be fine. But the
only manifest I get, (and one Moodle doesn't recognize) is
breeze-manifest.xml - which doesn't look anything like a SCORM
manifest. Other than that i just have my 2 swf files and a
BDMetadata.xml file that isn't SCORM related either.
I am using Windows Vista - not sure if that matters - but
something about the LMS reporting is not working with Captivate 3 -
I've tried different settings - SCORM 2004, AICC - and the
breeze-manifest.zml is all I ever get.

Uncheck the 'publish Breeze metadata' (or something like
that) in the
Publish options to avoid the useless (if your not using
Breeze) Breeze
manifest. Be sure you have 'publish to zip file' (or
something like
that) checked. I'm pretty sure a manifest is not generated if
you don't
output the results to a zip file...
If you do both those, is there an imsmanifest.xml file in the
resulting
.zip file?
Erik
stace20 wrote:
> and the breeze-manifest.zml is all I ever get.
>

Similar Messages

Timeline changes not saved-Captivate v2

(Captivate, v2, Windows XP SP2 OS)
I've been struggling with this for 2 days - I have multiple
objects on a slide and have rearranged the order of the objects on
the timeline - by dragging and by using the menu. After making the
changes, saving and closing the file, when I reopen it, the objects
have reverted to the original order.
After changing the order of objects on the timeline, the new
order is not saved. I have tried rebooting my PC and also
reinstalling Captivate with no success. Does anyone have
suggestions?

I've been having the same problem. I have a project with
about 100 slides, and sometimes the timeline will change the order
of the objects on several of the slides, moving objects to the top
that had been on the bottom, and vice versa. The mouse and the text
captions are the objects that seem to be affected the most. After
I've sifted through the entire project to make sure I've corrected
anything that needs to be corrected, I'll save the project, close
it out, and reopen it only to find that everything was put back the
way it was before. Sometimes after I've made my corrections to the
timeline, I'll publish or preview the project, and discover that
the objects that were misplaced on the timeline are still showing
up incorrectly even if the timeline itself is showing the changes
that I had made. Does anyone have any suggestions about
this?

SCORM manifest title and description

Hi
I'm trying to create a description and title field in the SCORM manifest. I set settings in the Project Information (see picture), but they don't seem to show up in the manifest. Am I doing something wrong? Thanks!

Project > Information description is not for the SCROM manifest it is for assistive devices. You must go into Preferences > Quiz > Reporting > Enable reporting, choose which type of LMS you're using and the standard then click on Configure, the course Title will be uplaoded to the LMS as and the SCO title also be uploaded in the pop up (at least that's how it worked in my LMS). The description never came through for me in my LMS (also I was using an older version of Captivate back then). So maybe in yours it will.

SCORM Manifest Information Shows in LMS

We are uploading courses to our LMS (Cornerstone). When we launch the file, there is a section to the right of the actual course that appears to show information from the SCORM manifest file.
I have not been able to figure out if this is something I can turn off from either Captivate or from Cornerstone, but I know we don't want it to show (it looks messy, and takes up a lot of the screen).
Screen shot is below -- has anyone had this issue before and been able to remove it?
Much appreciated!

I'm coming back to this issue after a few months because it is seriously impacting a project I am trying to publish for a client.
If I publish as SCORM 2004, I get the screen pictured above.
If I show the TOC with a customized skin (via Captivate), I get the screen shown to the right. (TOC is pretty from Captivate, but I still get the extra window at the left.)
If I publish as SCORM 1.2, the extra window goes away, but I lose Seamless Tabbing, which completely screws up the tutorial, which uses Tab to enter data into the fields.
Cornerstone does not have an option to turn anything off when uploading a eLearning module. Even if they did, the fact that the screen disappears when publishing as SCORM 1.2 implies that there is something going on with the SCORM 2004 publish that is different.
I have read other threads that tell me to add a line to the SCORM 1.2 HTML file to fix the seamless tabbing issue. However, the HTML file simply routes out to the javascript file, so that can't be done.
And, although HTML 5 is a preferred solution, Captivate's HTML 5 version does not support rollover captions, which I use in my tutorial.
Do I have ANY other options here? I would very much appreciate some help.
Thank you.

Audio track edits not saved

I am using Captivate 4. I have a group of files where any edits I make to the audio track are not saved. The audio plays back fine in the audio editor. It just will not save the changes I make to the audio track (cut segments, add silent segments, etc.) I make a change, click OK in the audio editor, close the editor. When I reopen the editor the changes are not saved. I tried uninstalling and reintalling Captivate. I tried saving the file under a different name. Any ideas why this might be happening and if there is any workaround? thanks.

Hi there
You should ensure that Captivate has been updated to the most recent release. The developers released an update after the initial release. Additionally, you may need to follow what is outlined in this blog post. I had to do that on my PC.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Volume control slider position not saved at exit

Just upgraded to 6.0.2.23 and when I started it for the first time, I noticed that the volume slider was pegged at max. Thought nothing of it and turned it down. The next day, when I started iTunes, I noticed that it was pegged again.
It appears to me that the position of the control is not saved any more. It was in the previous version and this is new.

Hello,
In Captivate 5 there is a volume control widget. Did you try that? Open the Widget panel (or the Widget Workspace), click on the button Browse, you'll find it in the Gallery, Widgets folder.
Lilybiri

Is there a scorm manifest maker for dreamweaver cs6

I purchased Creative Cloud that came with Dreamweaver CS6. I assumed there would be coursebuilder as it was listed. It didn't come with coursebuilder.
So, my question is if there is a SCORM manifest maker that plugs into Dreamweaver CS6 or will the old manifest maker on the Adobe Exchange still work?

I assumed there would be coursebuilder as it was listed.
Nope. I've never seen coursebuilder in the Cloud product list.
http://www.adobe.com/products/creativecloud/buying-guide.html
AFAIK, coursebuilder used to come with e-Learning suite. I don't know if it still does. E-Learning suite is a separate purchase & not currently available on the Cloud.
http://www.adobe.com/products/elearningsuite.html
Nancy O.

Image is not saved in jpeg/bmp file but ok with png

Hi i am unable to save the image in disk in jpeg format.
Here is the code.
public void saveImage(){
//if no filechooser is there means no image file opened.
        if(fileChooser==null){
            if(errorWindow==null)
                errorWindow=new ErrorWindow(XXX.getPrimaryStage());
            errorWindow.showErrorWindow("There is no image to save !!\n");
        else{
            fileChooser.setTitle("Save The Image");
            File saveFile=fileChooser.showSaveDialog(XXX.getPrimaryStage());
            if(saveFile!=null){
                System.out.println("saveFile path= "+saveFile);
                //get the extension of output image to be saved.
                //XXX: is the main class name(say)
                outExtension=*XXX*.getImageExtension(saveFile);
                //if user does not give extension: set default extension as jpg
                if(outExtension.equalsIgnoreCase(saveFile.getName())){
                    outExtension="jpg";
                    String newPath=(saveFile.toString())+".jpg";
                    saveFile=new File(newPath);
                Task task = new Task<Void>() {
                    @Override
                    public Void call() {
                        Platform.runLater(
                                new Runnable() {
                                    public void run() {
                                        try {
                                            //The image is inside ImageView->inside ScrollPane-> inside TabPane.
                                            Image curImage=XXX.getCurrentImage();
                                            int width=(int)curImage.getWidth();
                                            int height=(int)curImage.getHeight();
                                            System.out.println("cur image width= "+width+" ht= "+height);
                                            bufferedImage=new BufferedImage(width, height,BufferedImage.TYPE_INT_ARGB );
                                            //set the current image to awt Buffered Image
                                            SwingFXUtils.fromFXImage(curImage, bufferedImage);
                                                imageTabPane=xxx.getImageTabPane();
                                                Tab tab=imageTabPane.getSelectionModel().getSelectedItem();
                                                TabPane childTabPane=(TabPane)tab.getContent();
                                                ScrollPane sp=(ScrollPane)childTabPane.getSelectionModel().getSelectedItem().getContent();
                                                final ImageView imageView=(ImageView)sp.getContent();
                                                WritableImage wim = new WritableImage(width,height);
                                                imageView.snapshot(null, wim);
                                                System.out.println(" snapShot width= "+wim.getWidth()+" ht="+wim.getHeight());
                                                *ImageIO.write(SwingFXUtils.fromFXImage(wim,null), outExtension, saveFile);*
                                                   //<------ its not working for png,jpeg,bmp,gif
                                                // the below lines are working only for png and gif
                                                OutputStream out = new FileOutputStream(saveFile);
                                                ImageIO.write((RenderedImage) bufferedImage, outExtension, out);
                                                out.flush();
                                        } catch (Exception ex) {
                                            Logger.getLogger(FileMenuController.class.getName()).log(Level.SEVERE, null, ex);
                                            //ex.printStackTrace();
                                        System.out.println("finished");
                        return null;
                Thread th = new Thread(task);
                th.start();
            }else{
                System.out.println("File is not saved");
    }//saveImageNote: The above code is executed in ubuntu(10.04) using Netbeans 7.2(Javafx(2.2), java(1.7.0_11).
When i run(from terminal) separately in a new class with an image in an Imageview( inside a Vbox) and take the snapshot
of the imageview and write into the file using ImageIO.write(SwingFXUtils.fromFXImage(wim,null), outExtension, saveFile);
with any extension (jpeg,png etc) it is working fine.
Please help me.
Any small hint is also helpful.Please feel free to comment or give suggestion.
Edited by: 963038 on Feb 17, 2013 7:14 PM

When i omit the line OutputStream out = new FileOutputStream(saveFile);
and write only
ImageIO.write((RenderedImage) bufferedImage, outExtension,saveFile);
//out.flush();
then saving the image even in "png" also fails.
The following is the error code:
Note : FileMenuController is my file where the saveImage() is wrtten.
javax.imageio.IIOException: I/O error writing PNG file!
finished
     at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1168)
     at javax.imageio.ImageWriter.write(ImageWriter.java:615)
     at javax.imageio.ImageIO.doWrite(ImageIO.java:1612)
     at javax.imageio.ImageIO.write(ImageIO.java:1536)
     at *newciptk.controls.menu.file.FileMenuController$1$1.run(FileMenuController.java:205)*
     at com.sun.javafx.application.PlatformImpl$4.run(PlatformImpl.java:173)
     at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:76)
     at com.sun.glass.ui.gtk.GtkApplication._runLoop(Native Method)
     at com.sun.glass.ui.gtk.GtkApplication$3$1.run(GtkApplication.java:82)
     at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: Operation not supported
     at java.io.RandomAccessFile.writeBytes(Native Method)
     at java.io.RandomAccessFile.write(RandomAccessFile.java:499)
     at javax.imageio.stream.FileImageOutputStream.write(FileImageOutputStream.java:124)
     at javax.imageio.stream.ImageOutputStreamImpl.writeInt(ImageOutputStreamImpl.java:91)
     at com.sun.imageio.plugins.png.ChunkStream.finish(PNGImageWriter.java:136)
     at com.sun.imageio.plugins.png.PNGImageWriter.write_IHDR(PNGImageWriter.java:401)
     at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1135)
     ... 9 more
javax.imageio.IIOException: I/O error writing PNG file!
     at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1168)
     at javax.imageio.ImageWriter.write(ImageWriter.java:615)
     at javax.imageio.ImageIO.doWrite(ImageIO.java:1612)
     at javax.imageio.ImageIO.write(ImageIO.java:1536)
     at newciptk.controls.menu.file.FileMenuController$1$1.run(FileMenuController.java:205)
     at com.sun.javafx.application.PlatformImpl$4.run(PlatformImpl.java:173)
     at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:76)
     at com.sun.glass.ui.gtk.GtkApplication._runLoop(Native Method)
     at com.sun.glass.ui.gtk.GtkApplication$3$1.run(GtkApplication.java:82)
     at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: Operation not supported
     at java.io.RandomAccessFile.writeBytes(Native Method)
     at java.io.RandomAccessFile.write(RandomAccessFile.java:499)
     at javax.imageio.stream.FileImageOutputStream.write(FileImageOutputStream.java:124)
     at javax.imageio.stream.ImageOutputStreamImpl.writeInt(ImageOutputStreamImpl.java:91)
     at com.sun.imageio.plugins.png.ChunkStream.finish(PNGImageWriter.java:136)
     at com.sun.imageio.plugins.png.PNGImageWriter.write_IHDR(PNGImageWriter.java:401)
     at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1135)
     ... 9 more

Excise invoice is not saving and not showing datas

in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.

Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
<b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
Check
<b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT</b>
Message was edited by:
sam masker

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Non admin user - changes not saved (Safari settings, system prefs, etc.)

iMac, 2 users, one is administrator and other is standard user. Recently, in the non-admin user account, it has become impossible to make any changes. For example, adding an application to the the Dock, after logging out and back in next time, the application is not in the Dock any more. Also, making changes to the prefs in Safari, changes are not saved.
I noticed this after installing FireFox v4. I installed it as admin whilst in the non-admin users account. However, I don't believe that the installation of FF has anything to do with the problem, it just highlighted it. I've checked the permissions for the various directories that hold prefs info such as user/libraries/application prefs/etc. etc. and also Safari prefs. Nothing I can see that has changed in system prefs.
Any ideas on what has caused the problem (kids are known to fiddle from within the non-admin account) and any ideas on how to fix it?
Thanks

Hi PPRuNe,
You could try making the standard user an Admin too. To do this, make sure you are logged in to the standard user, go to System Preferences > Accounts > Standard user (you may have to unlock the padlock) > Allow user to administer this computer
This will allow changes to be made without being prompted for a password all the time.
However, if you had Parental Controls on, they probably won't work on an admin account because as an admin you have complete control over a computer, so the computer thinks there is no point in having the controls turned on. And if the kids are known to "fiddle," just think carefully!
Hope this helps you.
Chris.

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

My blends in Illustrator CS4 are not saving or printing correctly. Why?

Why are my blends in Illustrator CS4 not saving or printing correctly???
SPECS:
Adobe CS4
MAC 10.5.8
I got a outlined Text blend with a drop shadow. And another text with a drop shadow on top. Not too complex at all.
Heres some screenshots of the problem.
(1) Adobe Illustrator Screenshot
(1) Screenshot of my saved TIff file. I saved as a PDF as well and still no luck.
Any suggestions?

Mylenium,
Thanks for you time and suggestions! You helped alot! My layers panel was crazy. I re-arranged, re-organized and stacked according to the graphic. Solved my problem first try. Not used to making sure the order is right in illustrator, only in photoshop.
Thanks again man!
-NightRed

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

Hyperlinks not saved correctly in PDF and Excel

Hi,
I have a few reports with hyperlinks to other reports that contain multiple input parameters, which makes the links very long. ( greater than 400 characters )
When the reports are saved as excel, I am unable to invoke the child report on clicking the link as the link is not saved entirely ( can see that when i try to edit the hyperlink in excel ). Therefore the child report opens but prompts for inputs as not all the inputs are passed
When saved as pdf, the link is not saved correctly and i cannot invoke the child report at all
Please can you suggest a solution/workaround? Alternately is it possible to disable the hyperlinks when saved as excel/pdf?
Regards
Sameer

Hello,
I think this is a limitation in Excel where URL syntax has to be 255 characters or less
In order to prove that it's coming from excel and not BO, try in excel to create a false hyperlink which contains more than 255 characters.
A workaround might be to modify the cell as text and will not be recognized as a URL. So you should get it entirely.
Please let me know if it helps you
Regards,
Philippe

Captivate 3 not saving SCORM manifest

Similar Messages

Maybe you are looking for