Captivate 4 Automatic Recording does not record application

Windows 7 64bit, Captivate 4.01. Run as Administrator. Create Project>Software Simulation>Record Application - Microsoft Excel 2010. Automatic Recording selected - mode doesn't matter, but Demonstration and Assessment checked. Start recording with red button. All settings default. After lots of moving around, typing, clicking, etc. in window, I can't stop recording using End key - I have to click on the CP icon in the Notification Area icon to stop recording. The resulting project is a single slide without any of the actions recorded. To repeat - I did start Captivate by right clicking on the desktop icon and selecting Run as Administrator.
Anyone resolve this issue? I did try searching the forum before posting, but maybe it isn't IE9 compatible as I got 0 results - even when searcing for "Captivate 4 Windows 7"

Captivate 4 CAN sometimes work fine on Windows 7 64bit systems.  It does on mine, but not all users report this success.
Before you go and buy Cp 5.5 you might as well try the different compatibility settings to see if one of them will work for you.
Another thing to be aware of is that Captivate doesn't always capture every single screen event for some programs.  So with the project you found resulted in a single slide, were you hearing the camera shutter sound at regular intervals?  If not, it may be simply that Captivate wasn't "seeing" the events on screen and you might have needed to do more manual captures to get everything.

Similar Messages

  • Smart Recorder does not record. Time is not increment

    Hi
    I have just purchased a new X-Fi Extreme Music sound card.
    I cannot record anything in Smart Recorder. The time display just stays at 00:00:00 when I press the record button. It is not because I enable the wait for sound feature. It just won't start.
    What is wrong? Software bug in Smart Recorder? Any other with the same problem?

    Nothing yet I think.
    I tried to mail Creative support, but it seems like they have no clue about what is going on.
    They keep telling me to try all sort of things, such as new drivers, install in safe mode, anti virus might have messed up the installation, etc...
    I have followed their advice, but it does not help.
    I'm stuck
    I am just hoping that a newer version at some point will fix the problem.

  • Record does not "check in" after workflow is complete

    Hi All,
    I have built a very simple workflow as below
    1. start step
    2. process step
    3. approve step
    4. stop step
    in the fourth step that is the stop step i have selected "check in" so that the record automatically check's in after the process is complete,
    but the record does not check in and the data manager shows it as in workflow. please help
    Thanks in Advance
    Sharma.

    Hello Abhishek,
    Thanks for the reply.
    The issue is resolved.
    The user had the authorizations and the records were checked out as well.
    i was missing the step of "Mark as approved" that was the reason for the records not to check in automatically.
    Thanky you again.
    Regards,
    Sharma

  • Update Record Does Not Show in Server Behaviors Pane

    I am using Dreamweaver CS4 on a Windows 7 machine. I am coding in ASP VBScript. When I apply an Update Record behavior to a form and upload the file to the server, it works fine. However, the Update Record does not show in the Server Behaviors pane. Therefore, I cannot click on it to make further edits to it. When I open this same file in Dreamweaver CS3 on a Windows XP machine, I do see the Update Record behavior in the Server Behaviors pane and I can click on it to make it edits. What do I need to do to get the Update Record behavior to show?

    Probably not the answer you are looking for, but support for traditional ASP has not been a focus of DW development, nor has it been for Windows 7 for
    that matter. ASP is a "depreciated" language and support for it is dwindling. The I don't know exact reason for what is happening to you here, but I'd imagine it's an issue with CS4s translators and the combination of the feature sets in both Win 7 and CS4 not "worrying" about ASP as much as they used to.
    Lawrence Cramer  *Adobe Community Professional*
    www.Cartweaver.com
    Complete Shopping   Cart Application for
    Dreamweaver, available in PHP and CF
    Stay updated - http://blog.cartweaver.com

  • Purchase info record does not exists in purchase organization 1000

    Hi experts,
              I have created a new enterprise structure in SAP. when i am creating a PO its picking the correct info record, but when i am doing GR, its giving the error as 'purchase info record does not exists in purchase organization 1000". I have maintained everything perfect. the only thing i have changed is I have moved the open and close period from 11-2002 to 12-2008 in MMPV.
             Please give me some suggestions, where it can go wrong.
    Thanks & Regards,
    Poorna.

    Hi Guys,
              Thanks for all yours responses, Actually what deepak said was right, but in my IDES system i am not able to create new entries in assign plant to std purchase org. I found the database view for that, V_001W_E its for table T001W. So i looked into that table i found that std purchase org was given as 1000. i made direct entries in that table, i thought the reason for this may be due to , that i copied plant from 1000. After making entries , i did not got the error message that was i am previously getting.
    Thanks & Regards,
    Ravi.

  • InvalidRecordException: Input record does not have a valid Id.

    I am trying to export data from hybris to endeca. I have set up the index schema, index element, cas config, added properties.
    I have added queries the index elements but somehow the recordstore are not exporting the data to endeca. When, I checked the recordstore for data, it returned an empty file. I have checked the record store config for data and it shows record.spec available. Not sure why I am getting the InvalidRecordException.
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <recordStoreConfiguration xmlns="http://recordstore.itl.endeca.com/">
    <changePropertyNames/>
    <idPropertyName>record.spec</idPropertyName>
    <jdbmSettings/>
    </recordStoreConfiguration>
    ERROR [hyend2exportcronjob1360880300110::de.hybris.platform.servicelayer.internal.jalo.ServicelayerJob] (hyend2exportcronjob1360880300110) [EndecaRecordStoreService] Exception during writing records to record store
    com.endeca.itl.recordstore.InvalidRecordException: Input record does not have a valid Id.
    at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:141)
    at $Proxy146.writeRecords(Unknown Source)
    at com.endeca.itl.recordstore.RecordStoreWriter.doFlush(RecordStoreWriter.java:170)
    at com.endeca.itl.recordstore.RecordStoreWriter.flush(RecordStoreWriter.java:145)
    at com.endeca.itl.recordstore.RecordStoreWriter.close(RecordStoreWriter.java:163)
    at de.hybris.platform.hyend2.services.endeca.impl.DefaultEndecaRecordStoreService.writeRecordsToRecordStore(DefaultEndecaRecordStoreService.java:125)
    at de.hybris.platform.hyend2.services.endeca.impl.DefaultEndecaRecordStoreService.writeRecords(DefaultEndecaRecordStoreService.java:98)
    at de.hybris.platform.hyend2.services.impl.DefaultExportService.exportSchema(DefaultExportService.java:456)
    at de.hybris.platform.hyend2.services.impl.DefaultExportService.exportSchema(DefaultExportService.java:210)
    at de.hybris.platform.hyend2.services.impl.DefaultExportService.export(DefaultExportService.java:121)
    at de.hybris.platform.hyend2.jobs.ExportJob.perform(ExportJob.java:67)
    at de.hybris.platform.hyend2.jobs.ExportJob.perform(ExportJob.java:1)
    at de.hybris.platform.servicelayer.internal.jalo.ServicelayerJob.performCronJob(ServicelayerJob.java:40)
    at de.hybris.platform.cronjob.jalo.Job.execute(Job.java:1294)
    at de.hybris.platform.cronjob.jalo.Job.performImpl(Job.java:813)
    at de.hybris.platform.cronjob.jalo.Job.access$1(Job.java:772)
    at de.hybris.platform.cronjob.jalo.Job$JobRunable.run(Job.java:677)
    at de.hybris.platform.util.threadpool.PoolableThread.run(PoolableThread.java:198)

    This was due to the dropping of recordstores which were not getting recreated. Using environment parameters (host and port) on the command line to create the recordstore for data resolved the issue.

  • Cp6 Mac - does not record audio in Video Demo mode?

    Cp6 / Mac OSX Moutain Lion - does not record audio in Video Demo mode - why is it not working?

    Please see this thread:
    http://forums.adobe.com/message/4732524#4732524

  • ORA-20212: Active audit detail record does not exist

    Hi All,
    While Executing the process flow using Scheduler,we got this error
    "ORA-20212: Active audit detail record does not exist, cannot update audit counts.
    ORA-06512: at "XXOWB.WB_RT_MAPAUDIT", line 2173
    ORA-06512: at "XXOWB.WB_RT_MAPAUDIT", line 3108
    ORA-06512: at "APPS.Test_MAP", line 3304
    ORA-06512: at "APPS.Test__MAP", line 9341
    ORA-06512: at line 1
    I Will test the Mapping my running directly from Control center and then in database.
    Cheers
    Nawneet

    Donot know the exact reason but when check the alert log found the error
    ORA-1653: unable to extend table
    and after allocating space the error was gone..
    Cheers
    Nawneet

  • 0BBP_TD_SC_1 Header GUID in item record does not match Header GUID

    Hi all,
    We are testing shopping cart (Line Item) extractor (0BBP_TD_SC_1) and we are finding that for some shopping carts, the Header GUID in the item record does not match GUID in the header record.
    The item record, however, has a field called 'DOC GUID' which matches the header GUID.
    Also, Header and Item GUID in the item record are identical.
    Is this how the extractor is supposed to work?
    Any suggestions will be appreciated, and points will be assigned.
    Edited by: RDA on Mar 20, 2009 10:34 PM

    Isn't it in BUP_VENDOR_ID?

  • How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

    Hello Everyone,
    How to update zero to a column value when record does not exist in table  but should display the column value when it exists in table
    Regards
    Regards Gautam S

    As per my understanding...
    You Would like to see this 
    Code:
    SELECT COALESCE(Salary,0) from Employee;
    Regards
    Shivaprasad S
    Please mark as answer if helpful
    Shiv

  • Backup and Recovery Tool does not record backup

    When I run the Backup and Recovery Tool backup on my OAS mid-tier (Portal/BI), the backup fails because it is unable to start the wireless service, which I am not using.
    This would not be a big deal, except the Tool does not record the backup, so I cannot select it to restore.
    Is there a way to force the Tools to recognize these backups or stop the Tools from attempting to start the wireless component?

    dmctl have an option to backup the configuration only, I dont remember if that's available for that version,but you can check running dcmctl command without parameters, it would show  a big list.
    If dont, best way is making a cold backup, stop all process, make backup and start process. Remember to start proceses using dcmctl command, not opmnctl.
    Greetings.

  • Isight audio does not record with video

    isight audio does not record with video

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • When I try to make a sound recording Quickplayer does not record?

    I tried to record my voice on Quickplayer however it does not record it. I looked at system preferences but did not notice any changes. However now it won't record my voice on audio recording.

    Launch QuickTime Player.
    From the menu bar top of your screen click File > New Audio Recording
    Then tap the gray button with a red circle in the middle to start recording.

  • I'm having trouble recording a bass to go along with a recording I dropped into GB.  I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record.  What am I missing?

    I have the bass connected to my imac with an interface.
    I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
    Am I missing something ?
    Please advise.
    Mike

    Double check all your audio settings. 
    System Preferences --> Sound --> Input should be set to your audio interface.
    GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
    With your track selected, open the Track Info pane, and select the Edit tab.  Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

  • What do i do if a record does not download, what do i do if a record does not download

    what do i do if a record does not download?

    Hello David,
    I am sure you are eager to download and listen to the album you purchased, and I'm sorry to hear that it isn't downloading.
    First, I recommend checking to see if the download was interrupted.  You can use the steps in this article:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    If the album does not download after following the steps in that article, I recommend trying to download the album from the list of past purchases.  As long as you are signed in with the same Apple ID you used to purchase the album, you will not be charged again.
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    If you are still not able to download the album, I recommend reporting this issue to the iTunes Store:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • External monitor. Works with Vista but not detected in Windows 7

    I have an external monitor connected to my laptop which runs vista and win 7. However, when I use the WIndows 7 OS, the monitor is not detected. Any tips?

  • How to prevent Autoquery in infobus forms

    Hi, When an info bus form comes up, it queries the data from the table and shows it up. I want to prevent this. How do I do this? In jbcl QueryDataSet there was a parameter to specify this behaviour. But nothing is seen in infobus documentation. Can

  • I think my phone is leaking..

    I have an iPhone 5S which is only three weeks old. I have a clear belkin case on it, and this afternoon I noticed there was liquid in the case - so I took it off and cleaned the phone and the case, and put the case back on.  I thought somehow somethi

  • NTCLUST.SAR version for NetWeaver 7.01 of Win2003 SP2 cluster

    Hello, while upgrading ERP 6.0 in HA environment of Windows 2003 SP2 MSCS to EhP 4 I came to point, where I should replace also SAP cluster dlls in NTCLUS.SAR (as per Note 1432155). It took me some time to find it among kernel database independent fi

  • Creative Cloud support for hiDPI Displays

    Just got a new Dell XPS 15 with a hiDPI Displaty and had to discover hat im barely able to use any CC App except Indesign because of a Ui that is viewable with strong glasses only. Is there any workaround or fix for this besides lowering resolution?