Captivate 4 modify the display layer in Default.htm

In Captivate 1, 2 and 3 I was able to modify this file:
\Program Files\Adobe\Adobe Captivate 3\Templates\Publish
SCORM.htm
In doing so I could totally eliminate any blank areas bordering a published project. (The project flash files were wrapped in a table. I merely changed thos tags in the source file and instead used an absolute positioned DIV tag.)
This was desirable because when launching the course through our LMS we wanted to have as much usable space as possible. Additionally, I could “float” a Player Control over the project rather than adding the player control to the bottom or top of the project.
All this allowed a lot of flexibility for the Instructional Designers.
I have been working with Captivate 4 off and on for several months an am not able to replicate the modifications.
In Captivate 4 I am now working with these files:
\Program Files\Adobe\Adobe Captivate 3\Templates\Publish\SCORM\1_2\
Default.htm
Custom.htm
Is there anyone with experience with doing these types of modifications with Captivate 4? I seem to remember posts of this nature to this forum many months ago when Captivate 4 first came out. Is this modification possible at all?
Lastly, in previous versions of Captivate I was able to "float" the Player control over the slide, I am now limited to having the player outside the boundries of the slide. Is there any work-around for this? Is this still not doable?
Thank you,
TPK

Hello,
If I do understand your question all right (sorry, am not a native English speaker), I do believe you are mixing up two things. If you want indeed to publish to PDF (and not to SWF or EXE), you'll get a multimedia PDF (in which a SWF can play) but in that case the user really do need the Adobe Reader 9, previous versions do not support multimedia PDF.
What seems a bit contradictory is that you start with mentioning an issue with a PDF that should be called from a CP-slide. The problem there could be that you were linking to an absolute path on your PC when browsing, can you check that? If you introduce simply the name of the PDF and you make sure that the PDF and the CP-published files (normally HTML, JS and SWF) are uploaded in the same folder, the CP will find the PDF. I think you now have a 'broken link' because of an absolute path reference for the PDF.
Lilybiri

Similar Messages

How can you modify the displayed columns on a Related Information List?

How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
Thanks

I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
RWB.

Can not modify the layout for my Default Display Form, inside an issue tracking list. the form will be blank after adding the cusotm styles

I am working on an Issue Tracking list inside SharePoint 2013. but when a user clicks on an item , the description field will occupy only a small area of the page , while most of the page will be blank as follow:-
so using F12 Developer Tools on IE i detect the marckup for the Description field as follow:-
where it is mentioned that it have a Width=350, so i add a Script Editor web part to the displayform and i specify the following to expand the field from 350 to 1000:-
<style>
#SPFieldNote
{width: 1000;
<style>
but the result is that the display form will display nothing when clicking on an item as follow:-
Of course if i remove the ScriptEditor web part the form will be shown again..
so can anyone advice from where i can force the default display item view to occupy the whole page size ? Thanks

Hi John,
Since width is mentioned in 'td' itself, so using styles we can't overwrite the width. For that you can implement javascript or jQuery code to set the width on td element.
$('#SPFieldNote').width('1000px');
Regards,
Brij K

How do I modify the display in Dreamweaver itself.

I just loaded Dreamweaver, and I find that all the menus and sidebars have fonts the size of ant footprints. I'm trying to figure out how to format the display of the application itself, but whenever I query on how to modify my menu bar, I get tons of info on how to modify a menu within a page I may be developing, but nothing on how to make the tool itself easier to read.
Thanks in advance for any assistance you may have for me.

Thanks for the feedback. I have a bit of follow-up.
I'm assuming you mean Control Panel\Appearance and Personalization\Display (Windows 7). I went there and I have three options, Smaller, Medium, and Larger. I'm already set at "Larger", but I went ahead and made a customized 200% display. Even though this made my icons so large they were shoved off the side of my display, it had zero impact on the font size of the Dreamweaver menu bar.
What this what you were intending I do?

How can I modify the display field names on the output port of my bi query

Hello,
I integrate my bi query in the visual composer storyboard.
Then I click on my output port of the query and see the output fields.
The display field names are very strange.
For example:
ABZCNQMDOPWJGHS1Q5Q27090
I have never save such a field name while I create my query in the query designer.
Have somebody an idea, where I can modify my displayed field names??
Thanks.
Thomas

Hi Thomas,
the cryptical names are the technical names of your query components. If there is no decription available (depends also on your portal language) then the technical names are displayed. Check your portal language in your user settings and then check if you have entered a description in the query designer for this language.
Best Regards,
Marcel

Can't modify the display of members in SmartView

Hi,
When I want to change the display of my members in SmartView (Hyperion->Options->Display) to display only the members name and/or aliases, I can't change it. The option is not selectable.
Can you help me please ?
Thanks.
Virgile.

You don't write what release of SV you're on or the tool you're going against, but I'll give you v11 and Essbase and try to remember 9.3.1's approach.
In 11, if you've made a particular database a Favorite in the Common Provider Services, you should be able to right click on the Essbase database and select "Change Alias Table" or something very much like that.
If the database is not added as a favorite, retrieve to the sheet, and then go to the Hyperion->Ad-Hoc Retrieve->Change Alias Table selection (doing that from memory, but I think that's it).
Lastly, if this is 9x, before you connect (maybe after? it's been a while), open Connection Manager, and right click n the connection name. A pop up menu will appear -- select "Change Alias Table".
Regards,
Cameorn Lackpour

Error While Modifying the Display Profile

When I am trying to run the dpadmin modify command for adding the Custom JSP channel into JSPTableContainer , I get a error saying
" ERROR : Failed to find channel/container : parent =JSPTableContainer,Channel/container=JSPTableContainer. "

Raj,
What I mean with re-add is that we always add never modify.
Here is a snapshot of a piece of an ANT script which builds the installer. First we clean the portal then we add the providers/channels:
echo Make a clean starting portal. Deletes all channels and providers......
/opt/SUNWps/bin/dpadmin remove -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -g -t root
/opt/SUNWps/bin/dpadmin remove -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -d "o=uu.nl,o=isp" -t root
/opt/SUNWps/bin/dpadmin add -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -g ${xml.temp.dest}/Root/DPServletISPStandaard.xml
/opt/SUNWps/bin/dpadmin add -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -d "o=uu.nl,o=isp" ${xml.temp.dest}/Root/DPServletAlleenTabbladen.xml
echo Add the linkprovider to the portal......
/opt/SUNWps/bin/dpadmin add -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -g ${xml.temp.dest}/LinkProvider/LinkProvider.xml
Courtesy of Nathalie Btw
good luck,
Ronald

Question about MMBE (stock overview) -- modifying the display layout (country of origin)

Dear everyone
I'm trying to change the layout of MMBE, so that it would display "country of origin" information.
Right now, this report displays the stock data for each batch. But, what I would like to display is the "country of origin" which is
specified for those batches (in the batch master data).
Would you possibly tell me how I can change MMBE for this purpose?
Kind regards,
Takashi

Hi,
Do refer the below OSS Note , which explains how you can manage the Layouts for MMBE through configuration in Point 4)..
982345 - FAQ: stock overview MMBE

Modify drop shadow layer style

In PS5 is it possible to modfy a drop shadow layer style changing it's color and opacity without changing the entire layer?

bainbru1 wrote:
Noel - the issue I encountered was that when I double clicked on the active layer and was presented with the default layer style dialog that did not show the color picker option and then selected drop shadow, I did not see the color picker to the right of the blending options.
As others have pointed out, unless there is some information missing in your problem description, you are observing normal and expected behavior. To clarify with screenshots what Noel and others have said above:
When you invoke layer style dialog box by double clicking on the active layer, by default it shows the controls for Blending Options. See the words Blending Options highlighted in blue on the left and the headline Blending Options in the main pane of the dialog box!
Merely checking the box for drop shadow does NOT make the drop shadow controls appear. Blending Options is still selected (highlighted in blue) and the controls in the main pane still have the headline Blending Options!!
To display the controls for Drop Shadow you need to click on the words Drop Shadow. Then the layer style Drop Shadow has the focus and the Drop Shadow controls are displayed. You can see this because the words Drop Shadow are now highlighted in blue and the headline over the controls in the main pane says Drop Shadow:
When you select the FX button at the bottom of the Layers Panel, you select the Layer Style you want at the same time, so the Layer Style you chose already has the focus when the dialog box appears, and the relevent controls are automatically displayed.

I need to create an action or script to save the file with the name of the selected layer

I need to create an action or script to save the file with the name of the selected layer (not including the hidden layers, but including those visible).
How could modify the script: 'Layer Comps To Files.jsx' to get the result?
Warning: I do not need to export all layers as files.
Who can help me?
THX in advance

Versione in Italiano (Further down the English version)
NB - Nella versione inglese ho messo tutte le immagini dei menu in italiano.
Versione per Mac, ma credo sia identico per Windows.
Spiego passo passo cosa ho fatto:
- Ho creato un file esempio con tre Livelli, salvato sulla scrivania e ho chiuso il file.
- Ho aperto il file e selezionato il Livello al centro per iniziare a registrare una azione che ho chiamato: Save with Name of Selected Layer
- Nuova azione
- Dare il nome e premere Registra
Ora salva…
- Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Ancora una volta Menu --> Livello... --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Menu --> Livello --> Ordina --> Dietro
- Menu --> Livello --> Unisci sotto
- Menu --> Livello --> Unisci visibili
- Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Menu --> Livello - Nascondi Livello
- Menu --> Elimina --> Elimina livelli nascosti (press -Yes-)
- Menu --> Livello --> Nuovo --> Livello... Inserisci questo: 'Move this to the trash' e premi ok
- Menu --> File --> Script --> Esporta Livelli in File... (Nella finestra che si apre scegliere l’opzione che si desidera, ma togliere il prefisso del nome) e premere -Esegui-
- Selezionare il pannello Storia cliccare su Elimina premendo -Si- ogni volta che si apre la finestra di dialogo (Ripetere 8 volte questa operazione sino ad arrivare nella storia alla condizione di partenza. Ho visto che è meglio di Ripristina -F12-)
- Fermare la registrazione.
A questo punto, mandando in esecuzione questa Azione, ho raggiunto parzialmente l’obiettivo perché i file così creati mantengono, purtroppo, dei prefissi numerici per evitare probabilmente la sovrascrizione di file (credo senza avviso) nel posto dove vengono creati.
Per ottenere l’obiettivo occorre un nuovo passo ed a proposito di questo riferisco quanto segue:
ATTENZIONE - L’operazione descritta qui di seguito deve essere fatta su di una copia del file, per cui:
- Duplicare il file,
- Spostare l’originale in altra cartella
- Lavorare sul file duplicato.
mi riferisco a questo...
ATTENZIONE - Questa modifica è effettuata a proprio rischio e pericolo ed il sottoscritto non si assume alcuna responsabilità su quanto venga fatto soprattutto da mani inesperte.
ATTENZIONE - Questa modifica sovrascrive qualsiasi file che abbia nome uguale al layer che viene selezionato più l’estensione del file naturalmente.
Comunque la modifica è banalissima e a portata di chiunque.
Procedere così:
- Chiudere Photoshop
- Aprire (nel percorso specificato dall’immagine) il file “Export Layers to Files.jsx” (Export Layers To Files.jsx 1.0.0.16) con un editor di testo puro.
- cercare la stringa (dovrebbe essere in riga 1029)
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4);
fileNameBody += "_" + layerName;
- sostituirla con:
var fileNameBody = fileNamePrefix;
fileNameBody += layerName;
- cercare la stringa (dovrebbe essere in riga 1047-46)
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4) + "s";
- sostituirla con:
var fileNameBody = fileNamePrefix;
fileNameBody += "";
- salvare e uscire.
- riavviare Photoshop
- provare l’azione registrata facendo attenzione che il nome del layer non sia identico al nome di un file già presente altrimenti questo verrà sovrascritto.
Domanda:
Perché ho creato livelli che poi ho eliminato ecc.
Risposta:
Semplice per evitare errori di esecuzione delle azioni nel caso di operazioni con livelli mancanti o altro.
Semplice... no?
English version
Mac version, but I think it's the same for Windows.
First of all, I'm translating the actions that I made using the Italian version of Photoshop, you look at the position of the menu that I have chosen to do the work with other languages.
I explain step by step what I did:
- I created a sample file with three layers, saved to the desktop and I closed the file.
- I opened the file and select the layer at the center to start recording an action that I called: Save with Name of the Selected Layer
- New action
- Give the name and press Save ( I think it is so in English )
Now save ...
- Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Once again Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Menu -> Layer - > Arrange (order) -> Behind
- Menu -> Layer - > Merge Down
- Menu -> Layer - > Merge Visible
- Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Menu -> Layer - Hide Layer
- Menu - > Delete - > Delete hidden layers (press -Yes- )
- Menu -> Layer - > New —> Layer… Enter this: ' Move this to the trash ' and press ok
- Menu -> File - > Scripts -> Export Layers To Files... (In the window that opens select the option you want, but take away the name prefix) and press - Run -
- Select the History panel and click Delete (on menu opened) pressing -Yes- every time when open the dialog box (8 times Repeat this step until you get into the story to the starting condition. Not use Restore -F12-).
- Stop recording.
At this point, by executing this action, I have reached the goal partly because the files created in this way remain, unfortunately, the numerical prefixes to avoid possibly overwriting of files (I think without notice) in the place where they are created.
To achieve the goal we need a new step and thinking about this as follows:
WARNING - The operation described below should be made on a copy of the file, so :
- Duplicate the file
- Move the original folder to another
- Work on the duplicate file.
WARNING - This modification is performed at your own risk and the undersigned assumes no responsibility on what is done mostly by inexperienced hands.
WARNING - This change will overwrite any files with the same name as the selected layer plus the file extension of course.
However, the change is trivial and within reach of anyone.
Proceed as follows:
- Close Photoshop
- Open (in the specified path from the image ) file " Export Layers to Files.jsx " (Export Layers To Files.jsx 1.0.0.16) with a pure text editor.
- Search for the string (should be in line 1029 )
var = fileNameBody fileNamePrefix ;
fileNameBody = + "_" + zeroSuppress (i, 4 ) ;
fileNameBody + = "_ " + layerName ;
- Replace it with :
var = fileNameBody fileNamePrefix ;
fileNameBody + = layerName ;
- Search for the string (should be in line 1047-46 )
var = fileNameBody fileNamePrefix ;
fileNameBody + = "_ " + zeroSuppress (i, 4) + "s" ;
- Replace it with :
var = fileNameBody fileNamePrefix ;
fileNameBody + = "";
- Save and exit.
- Restart Photoshop
- Try the recorded Action, making sure that the layer name is not identical to the name of an existing file otherwise it will be overwritten.
Question:
Why I created levels which I then deleted etc..
Answer:
Simple to avoid errors of execution of the actions in the case of transactions with missing levels and other.
Simple ... is not it?
Sorry for my bad English...
Thanks in advance for any hint.
--->>> Please think about this... Adobe <<<---

Unlock the background layer?

Why does Elements automatically lock the background layer? Is there no way to unlock it? Sometimes I like to modify the background layer, move it around, and make other alterations to it. As it is, if I want to move the background, I must copy it onto a new layer, make the shift, then delete the old background! Needless to say, very slow for large files.

Right click background layer in the layers palette, click "duplicate layer", then shut off visibility of the background layer by clicking the eye icon.
The background copy layer is now at your disposal for manipulation.
If you need to start over again, just delete the layers which you have created.

Can you modify the default columns displayed in standard lists?

Hi,
Is it possible to changes the columns displayed in the standard out of the box lists? e.g. All Companies.
After making our customisations most objects need to have their standard list columns modified and I do not really want to have to re-create all the standard lists we want to use in order to get relevant columns displayed?
Thanks for the help.

Hi,
I don't believe you can modify the out of the box lists without recreating them.
Not sure if this will work for you, but a possible workaround would be to use Search Layouts to achieve your desired result. For example, if you were to modify the Search Layout for accounts to reflect all the relevant columns you need to display, then a simple search for "*" as the Account Name would result in a search for All Accounts in the list format you wish to see.
Hope this helps.
Regards,
Cameron

How modify the default page from jdeveloper

I´m trying set a aplications server whit jdeveloper, but i can´t find a configuration file, to modify the default page showed in http://localhost8080
can you help me ???

Thanks Maxi... I explain you, I'm trying to set a webservice whith JDeveloper 11g to simulate 3 layers, a computer whit windows system it will be the front end or first layer, and the second computer whit linux system it will be the second( coordination layer) and third layer ((data base layer)), and , my question is this; Jdeveloper has a server aplications like apache ??? where I can set a default page whith a JSP to connect the first layer whit the layer that has installed the linux system.
Thanks.

Modify the Chart Display colors

Hi,
Is there a way to change the coloring of charts in VC?
I tried to edit the GML file and change the "series" attribute of the chart element. I need to display the line in red color. I am using a combo chart of column+lines.
When I edited the code, i realised that its not letting me skip the inbetween dataseries colors. And a closer shade of red in the dataseries by default comes as series 7.
Is there a workaround for this?
Ashwini.

Hi Ashvini,
      The colors that are automatically assigned to your application by Visual Composer should suffice; however, if your application requires that specific colors be assigned to elements, you can implement this by modifying the CSS files that are used by the Flash runtime.
1.Go to the following directory on the J2EE server:
...\usr\sap\...\...\j2ee\cluster\server0\apps\sap.com\vc_client\servlet_jsp\VCRes\root\webContent\VisualComposer\6.00\bin.
2.Within the directory, you'll see the following two files: 15595730 and 1808630. You should always make a backup of the files before continuing. Within the files, there are DefaultFlexFrameStyle tag properties. By changing their values, you can assign colors according to our needs.
3.The following example regarding this issue is from the official SAP Note 959996. It changes the text input control background color:
DefaultFlexFrameStyle.TextInput =
{'corner-radius': 2,
   'margin-left': 5,
   'drop-shadow': false,
   'border-style': 'solid',
   'font-weight': 'normal',
   'background-color': '#FFFFFF',
   'border-color': '#84898D',
   'disabled-color': '#999999'}
4.You have to back up the new files, because any subsequent Visual Composer patches or upgrades will overwrite the modified files.
5.Before redeploying the backups after an update, you must ensure that there is no change to the set of tag properties in the updated files. In general, we recommend that you copy the changes into the new files instead of overwriting them.
Regards,
Vinoth.M

Modifying the Default Result Set on the Results Tab of the SQLWorksheet

I have found the previous posts indicating that the default result set size is 50, that it is not currently able to be modified and (good news) that an enhancement will be coming to correct this.
I thought I would give my two cents on how this option might be configured:
Either in the 'View-Options-(output options)' or the 'Tools-Preferences-Environment' areas, have two options. The first would be something like "Max Rows to Display in Results Window" and the second would be sometihng like "Max Rows to Load when end of Current display is reached."
The first option is certainly most essential, but the latter option I have to explain a little. Say you set your max rows to display to 500. You scroll (drag bar, arrow down, etc) to record 501. At this point, the setting on the "Max Rows to Load When End of Current Display is Reached" option comes into play. This setting will then be read to determine how many rows are to be loaded each time the user gets to the current end of display. The second option adds some flexility to how data rows will be displayed after the initial data rows are loaded.
You could just default the number of rows added to the display to the setting set in the "Max Rows to Display in Results Window" setting, although I would say that this would be less flexible. Whatever you do, don't follow the Toad example of loading ALL records when dragging the vertical bar to the bottom of the display grid.
Thank You for your time.
Scott Lips

I like the idea.. please post this on the sister website so that people can vote on it.
http://sqldeveloper.oracle.com/

Captivate 4 modify the display layer in Default.htm

Similar Messages

Maybe you are looking for