Captivate 4 & moodle. Issue with non-quiz SCO's

We are using Captivate 4 and moodle 1.9.5+.
Here's the issue: How do we set up a SCO in Captivate that does NOT include any sort of quiz to report a score?
Because we can't get bookmarking to work properly from Captivate SCO's to moodle, we have had to break apart our course into sections. Now the course consists of something like "lesson1 SCO" and "lesson1quiz SCO", "lesson2 SCO" and "lesson2quiz SCO", etc. The lesson SCO's are just information presented to the student and the "lesson#quiz SCO" are just quizzes.
The quiz SCO's are reporting the correct grades to moodle and being stored in the gradebook but we can't figure out what settings to set the lesson SCO's to, in order to report a score of 100. Currently, these lesson SCO's are reporting a score of "0" which is affecting moodle course averages score.
The only way around this that we have found is to add the lesson# SCO's into moodle as IMS Content Packages and therefore not scored and the lesson#quiz SCO's as activities and therefore scored. The problem with this method is that we can't require the students to take the lesson# SCO's.
Is there anyone who has come across this problem before and knows a solution?

Hi there
Just stabbing in the dark here. What if you added a button on the last slide? Configure the button to report and assign it a value of 100 when clicked?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Captivate 7 - Bookmarking issues with Cornerstone LMS on IPAD

Hello,
I am looking for some assistance with Captivate 7 (currently using version 7.0.0.118) with the Cornerstone LMS and bookmarking when using an IPAD. We have no issues with content launching, bookmarking, and sending completions on Windows based opeating systems, but on IPAD's, with the latest version of the IPAD OS and Safari, we have no issues with launching the content and it will send back a completion, but the content will not bookmark.
Cornerstone is stating that the Safari browser on the iPad is not properly implementing the onbeforeunload trigger, which is primarily used in courses to force a save of the course data. This event is not triggered within the iPad version of Safari, preventing courses from saving themselves when the course is closed. We currently have our customers closing the web browser in order to exit the course on the IPAD. We are not experiencing this issue with the HTML5 courses that were exported with Captivate 6.
Thank you,
Karl

Clare,
If you want a continuous movie (since it is simply a demo) you can use the HD Video Demo. But editing and synchronizing will be much more a pain.
Captivate's power is just in the creation of those static slides, but I would never record narration at the same time. I create the VO after having created the simulation, that is much easier just because the slides are static. I have been choosing Captivate just for that reason, but of course it is up to you. Want to have just demo: use HD Video Demo or choose Camtasia. But you'll never have the interactivity power that has Captivate. For trainees and students, interactive simulations are much more engaging, but that is your choice. And even a 200 slides movie has only 6000 frames, and will have a much smaller filesize than a video that explains the same.
Lilybiri

Captivate 5.5 issue with finding external files

I have a project where I am trying to have a swf open another document (pdf, ppt, etc.). What I am having an issue with is Captivate does not see the files if they are not in the same directory as the swf. I have tried multiple options. I can not have a drive letter involved as this is a mobile file which will be run off of a USB drive.
Any ideas would be appreciated.
Thanks.

Hi there
I'm not sure what you are experiencing here. How exactly have you tried to path your links? If you know the "HTML Shorthand" of accessing files it should not be a problem. Captivate won't need to "see" the files. Certainly plopping all the files together is the simplest (and most often recommended) way of working, but as long as you know how to use what we call "Relative Addressing", things should work fine.
So if you want a structure like this:
Captivate SWF Folder
** SomeSWF.SWF
** SomeSWF.HTM
** Standard.JS
And maybe you want a folder named PDFS that would make the structure look like this:
Captivate SWF Folder
** SomeSWF.SWF
** SomeSWF.HTM
** Standard.JS
** PDFs
**** SomePDF.PDF
The link inside Captivate would simply look like this:
PDFS/SomePDF.PDF
Or maybe you have a folder named PDFS that you want at the same level as the Captivate SWF Folder so the structure looks like this:
Captivate SWF Folder
** SomeSWF.SWF
** SomeSWF.HTM
** Standard.JS
PDFs
** SomePDF.PDF
In that case the link inside Captivate would look like this:
../PDFS/SomePDF.PDF
Also, if you are testing on your local C drive, the links may not work because you need to asjust your Flash Player Global Security Settings and add the output folder as a trusted location.
Steps for doing that are at the link below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

LINK Excel.Sheet has issues with Non-English Office

In non-english office when we issue
LINK Excel.Sheet.12 command, the range parameter is causing "Error! Invalid Link" error (¡Error! Vínculo no válido in spanish).
Example if we do:
{LINK Excel.Sheet.12 C:\\Temp\\Text.xlsx Test!R1C1:R2C2 \a \f 4 \h}
We get invalid link error (in spanish).
But when we remove the range parameter:
{LINK Excel.Sheet.12 C:\\Temp\\Text.xlsx \a \f 4 \h}
It works. This of course by default links only the first sheet by default. Anyone knows if this is a bug in Office for non-english? We are using Office 2010.

Hi V.C.A,
Based on your description, it seems that your issue was related with the field link feature of the Word, and this forum is mainly discussing about the Word development questions related to VSTO, VBA and .etc. For your issue, I will recommend you going to
the forum below for help:
http://answers.microsoft.com/en-us/office
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Captivate 7 having issues with HTML 5

Is there a patch or update for CP7 when it has similar issues as CP8 does with the newer version of Chrome?

You are probably looking for this.
Update on Captivate HTML 5 content playback issue in Google Chrome Browser. « Rapid eLearning | Adobe Captivate Blog
Sreekanth

Captivate 8 browser issue with HTML 5 published course

Hi, I'm troubleshoot a new issue. I have published a responsive course in HTML 5 and posted it to our LMS. The course played fine last week in Chrome but now seems to have a few issues. I wanted to know if anyone had any ideas if it's a browser compatibility issue or possible more to-do with the course publish settings. The course doesn't automatically play anymore. I have to click play on the playbar to start the course, the videos are slower, and the click boxes are not clickable.
Any ideas?

You may want to check out Jim's solution here.
http://captivatedev.com/2014/07/20/html5-captivate-projects-freezing-google-crome-v-36/
Sreekanth

Issue with non-english application in thin client - virtual directory issue

Hi,
I have just completed Siebel 8 installation on solaris machine along with SunOne Web server 6.1.
I have installed both ENU and ARA language packs for Siebe Enterprise, Sweapps.
The issue is after installation and repository installation for both ENU and ARA, I am able to open only ENU applications in thin client.
When I try to open the ARa applications the browser gives "Page not found" error.
I have verified first, whether the Siebel components running or not. Confirmed that for example for Callcenter SCCObjMgr_ara component is active and online.
But what I observed is, in SUNOne web server instance's config folder, there is a file obj.conf.
In this file there are entries for only enu applications like,
NameTrans fn="pfx2dir" from="/callcenter_enu" dir="/siebelapp/sweapp/public/enu"
There are no links for ARA applications.
I think this could be the reason for issue.
But while installing and configuring sweapps, I have selected the logical profile location as "/siebelapp/gtwysrvr/admin/Webserver".
So this should create such links in obj.conf for ARA as it created for ENU apps. But it didn't happend.
Please advise, how to get the ARA applications.
Thanks
Vamshi
Edited by: user4619223 on Mar 23, 2010 11:36 AM

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

Issue with non calculated column in a fact table

Hi All,
With 3 facts(Fact1,Fact2,Fact3) and 2 Confirmed Dimensions my joins work fine in Criteria when I include All calculated columns from facts. If I try to include a non calculated column from Fact1(Which is a number Data type) Columns from Fact2 and Fact3 show Null values. I know it is not recommended to include dimension columns in fact , does OBIEE not support Number type non calculated columns as well? Is there any work around that I can bring in my non calculated column from Fact and still get results for other fact columns.Iam at 11.1.1.7 of OBIEE
Let me know if Iam not clear.
Your help is much Appreciated.
Thanks,
Vineela.

i would like to add 2 fields into my fact tables - LOAD ID (populated by a sequence during each load) and LOAD DATE.
as these fields are not related to any reporting dimensions, it is still possible to add them in OWB ? the fact wizard always ask for a foreign key to a dimension ...
Duncan,
If you want to add non dimensional attributes to a fact by using OWB, you can create additional measures to it and use them as attributes.
Igor

Captivate 6.0 - issue with using audio files as voicover

We are using Adobe Captivate 6.0. We are using imported audio files as the voicover for the slides. While plyaing the final published exe, it runs normal. However, if I use the slidebar at the bottom of the slide for moving back and forth, the audio goes away while the slide continues to play. Can anyone please advise as to why this could be happening and how to resolve the issue? Appreciate any urgent help on this.

Hello there,
Have you inserted the audio on the slides or on the objects?
Can you increase the slide quality to 24-bit (slide properties), then republish the project and see whether that helps?
Thanks.

Crystal report Export/Print issue with Non default websites

Hello ,
I have an issue and its driving me nuts.
My problem i guess with the crystal reports. Might also be with IIS.
We have developed an website on VS2008. This website is configured on IIS 8.5
The server on which iis8.5 runs is a virtual server.
I have configured the website to run as two different virtual directories as mentioned below;
1) To run under default website (servername/virtualdirectory)
2) To run under complete separate website (www.abc.com/virtualdirectory)
if i run crystal report using the servername/virtualdirectory, then the report is rendered fine and i can export the results also to any format and print successfully.
But when i run the crystal report using www.abc.com/virtualdirectory, then the report renders fine but i cannot export the results nor print. Nothing happens when i click the export button.
Any help will be highly appreciated.
Thanks
Abdul Aleem

In addition to Don's suggestion. Remember that almost any action in the viewer will cause a post back - including clicking on the export button. If the report is not in session, the post back may fail and nothing will happen. See the following code on how to place a report object into a session:
1985571 - How to use sessions in web applications using the Crystal Reports viewer (the complete code)
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

IPhone 5 Wifi Hotspot - Issue with Non Apple Devices

Hi !
I have iPhone 5 and a Working LTE connection , My Carrier officially supports data tethering. Previously i could turn on Personal Hotspot and use internet in my card with other Non-Apple Devices such as GPS , Samsung devices etc.
But recently i noticed after update to 7.1.2 . I can turn on Hotspot
1- Apple Devices can connect to Hotspot such as Mac Book Pro , IPhone and iPad.
2- Windows Laptop can use Internet Using USB Cable connected with iPhone but can not connect through Wifi.
3- All other Non-Apple Devices ( such as Lumia 1520 , Samsung Galaxy S5 ) Can not Connect to Wifi Hotsopt.
Is there any specific restriction or policy which is preventing this.
I have tried , Reset All Settings , Reset Network Settings. but it does not work.

Hi dumbcode,
Welcome to the Apple Support Communities!
You sound very familiar with Personal Hotspot and have already done some good troubleshooting. In your situation I suggest going through the Wi-Fi trouble shooting section of the attached article.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Have a great day,
-Joe

G3 CD boot issues with non Apple keyboard?

I recently bought an iMac G3 350MHz that won't boot all the way into OS 9.1. It says there is an error with extensions and to restart, holding Shift to disable them. I did and I am greeted by the same message. I'm using a Logitech USB keyboard and wondering if that has anything to do with it.
I've tried booting from an OS 9.2 disc with no luck. I'm holding C at boot (before and after I turn it on). I have tried Command-Option-Shift-Backspace and Command-Option-O-F ...AND holding space to eject the disc and that won't even work. So now I have a sick iMac with an OS 9.2 disc stuck in it and I have no clue what to do next. I'm thinking since none of the keyboard commands work, it might be that the Logitech keyboard isn't supported till the OS boots. Since it doesn't have Firewire, I can't try Target Disc Mode...not that I have an available Firewire drive either.
Any suggestions would be very much appreciated. I was hoping it would be a simple fix but now I'm ready to throw it out.

Glad to hear the Al keyboard's OS specs don't make it a "no-go." Looks like a nifty bit of kit.
The CD is a backup from a friend.
Could be the heart of the problem from the start. And using a friend's disk would be a EULA violation unless that system isn't currently installed on any of his computers.
Tiger (10.4) WILL work on a G3 but your lack of a DVD drive and FireWire ports (for using FW Target Disk Mode to get around the DVD limitation) does present a problem. It's possible to get Tiger on without the DVD drive as illustrated in this article:
http://www.oreillynet.com/mac/blog/2005/05/thecats_mustachesinstalling.html
but it would be easier if your iMac had FireWire. The only part of the article that's incorrect is that the Media Exchange Program expired some time ago.
Panther is still out there with third-party resellers but you have to be careful in buying it. Full retail install disks are black with a big silver X and come on CDs, not DVDs. Gray disks are machine specific restore disks and may not have all the stuff your computer needs, aggravating the whole process. If you order a full retail install set and receive gray disks, send them back.
Before installing OSX (and I mean BEFORE), you have to update the firmware on your iMac to 4.1.9 while still in OS9. The process is relatively simple and full instructions are included with the download here:
http://docs.info.apple.com/article.html?artnum=75130
Failing to do the firmware update before attempting an OSX install can have serious consequences. If the firmware has already been updated the 4.1.9 updater will politely tell you that it's already there.
Allan

Hp eprint set up issues with non hp printer

HI
I have a hp pavillion p7 1414pc desktop with windows 8. There are also 3 laptops in the house that are Toshibas. Two use also windows 8 bought the week after the desktop one is a year and a hapf old using windows 7. They are all networked for various reasons.
Have a Epson workforce 635 all in one that is not too old - year or so that works like a dream and is also networked. Can print from the laptops without a problem. However can not print from the desktop. When it was installed it went right to this eprint set up. Not real familiar with it. I have read the instructions. There is not an icon on my Epson as it keeps referring to. I have the ip address and i typed it into a browser as it has said. While i get a window of information there is not HP Web Services Tab it says will be there. So i am not getting this printer code to in turn get the customized email address. I find it odd that my laptops will print wirelessly but the one plugged in - wired - to the printed i can not print from. I did go to Epson and download the windows 8 drivers for the printer and installed those.
Any suggestions would be greatly appreciated. I will not go buy a new printer when this one works like a champ and is windows 8 compatable. Thank you!

Hi,
HP and Epson are two companies, they may have something similar but we can't use HP ePrint to setup an Epson printer.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

FTP Adapter : Issue with Non English Text.

Dear All,
We are trying to read a file which contains Korean Language and write into a different folder in a CSV format.
The output file contains "???" inplace of Korean text.
We can see the invoke to FTP adapter contains Korean text as part of it's input. But the CSV file contains "???"
<FinalTradeCardList>
<imp1:FinalRows>
<imp1:C1>NO</imp1:C1>
<imp1:C2>사이트코드</imp1:C2>
<imp1:C3>사이트명</imp1:C3>
<imp1:C4>승인일자</imp1:C4>
<imp1:C5>주문번호</imp1:C5>
<imp1:C6>주문자</imp1:C6>
<imp1:C7>주문자연락처</imp1:C7>
<imp1:C8>카드종류</imp1:C8>
<imp1:C9>승인번호</imp1:C9>
<imp1:C10>거래상태</imp1:C10>
<imp1:C11>거래상태일시</imp1:C11>
<imp1:C12>할부</imp1:C12>
<imp1:C13>거래금액</imp1:C13>
<imp1:C14>비과세공급가액</imp1:C14>
<imp1:C15>과세공급가액</imp1:C15>
</imp1:FinalRows>
</FinalTradeCardList>
What needs to be done in BPEL to get Korean Language text in CSV file.
Thanks,
Sid.

Thanks for your reply.
I used the character set as you suggested.But it is not getting converted correctly.
Actual Value : (유)라이프테크놀로지스코리아
Converted Value : ( $)C @/ ) 6s@LGAEWE)3n7NAv=:DZ8.>F
I tried all others that are mentioned in the document. Still i am seeing different values. I am not getting the actual value.
But in BPEL i see correct value getting passed to FTP Adapter.
The character set is in XSD. Please find it below..
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
            xmlns:tns="http://TargetNamespace.com/DeleteMe"
            targetNamespace="http://TargetNamespace.com/DeleteMe"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            nxsd:version="NXSD"
            nxsd:stream="chars"
            nxsd:encoding="ISO-2022-KR">
<xsd:element name="Root-Element">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Row" minOccurs="1" maxOccurs="unbounded">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
              <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
Please review the above and help me in resolving this issue.
Thanks,
Sid.

Issue with First Quiz Question

When I try to go back BEFORE answering the first quiz
question, when I move forward again to the first question, it tells
me that "You did not answer the question completely"and it will not
allow me to answer this question or any additional questions. (I
have set the option to use the BACK button in a quiz.) If I answer
the FIRST question, it allows me to go backwards on any additional
questions. Why can't I move backwards before I answer the first
question? Is there something I am missing?

As Mzedella said, my understanding is that backing out of the
quiz (going backwards past the first question) costs the user an
attempt, so if you've only allowed one attempt, the questions are
considered not answered....
We have a mix of content and questions (not a single block of
quiz questions), and wanted to allow backward movement. We solved
this problem by making the first slide a question. That way, the
user is always in the quiz and they can move backward as much as
they like.
If you can't think of a good question for the first slide
(often a question about their background knowledge is good), you
can always make it 'are you ready to begin?'. A little clumsy, but
you get the functionality you want.
We further required all questions to be answered, so users
can't skip ahead past unanswered questions. By removing the nav
bar, but including a menu (via skin), users can easily review the
material, but are still required to at least click through all the
slides. This works for our application, but you many want something
different.

Captivate 4 & moodle. Issue with non-quiz SCO's

Similar Messages

Maybe you are looking for