Captivate 4 Pause Button Doesn't Work

Does anyone know why the pause in Captivate 4's buttons
doesn't work? I've rechecked my settings and it's still not
working.

On the properties dialog of a button, under the Options tab
please make sure that the "Pause after:" check box is checked.
Additionally, the time entered for this field should be comfortably
less than the slide time so that the slide could be paused well
before it ends.
For eg: if the slide duration is 3 seconds then I would
advise you to have pause after time to say something like 1.5
second.

Similar Messages

  • I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?

    I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?
    May try DIY due to cost
    Just wondering if anyone's had this fixed how much it costs
    Or if it's another problem before I order parts

    I have found the solution for myself for the above.  I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!

  • Universal dock remote control play/pause button doesn't work

    Hi all,
    Ok since updating to Ipod touch software v2.2 I have been unable to use the play/pause button on my Apple universal dock remote, whilst my iPod touch is in the dock.
    The volume controls and track next and previous buttons commands on the remote control work just fine.
    I have tried unpairing and then pairing the remote with the universal dock but same issue. I thought that maybe the play/pause key was possibly broken. However I tested the remote on my iMac and play/pause button works fine in front row.
    Any ideas/suggestions would be much appreciated.

    Strange thing is mine started working again last night and is still working. Seems the problem went away as it originally appeared. I hope it doesn't stop working.
    I will mark this thread as unanswered until we can figure why the remote, universal dock and iPod touch are behaving this way.

  • Headphone pause / play / FF button doesn't work on iphone 3g

    I cant get the button on my headphones to work. I have tried other headphones but this still doesnt help. Is there a setting for this button?

    I have the same problem here.
    I have an Iphone 16Gb firm 1.1.3 , my headphones button (start/stop - skip) works ONLY if i leave the headphone's jack plugged in the phone in STANDBY mode.
    In other words : Iphone in standby mode - plug the headphones - wake button - slide unlock ... everything perfect hedphones button works correctly.
    On the contrary if : Iphone in standby mode - wake button - slide unlock - and THEN plug the hadphones ... the headphone's button doesn't work !!!
    I don't make any restore also because i'm not sure that it can fix the problem and i don't want to loose all my notes - sms etc.
    I will do only if i will be sure that restore can fix this annoying issue.
    Thank you very much for any suggestion !
    Tillo
    N.B. Sorry for my bad english,but is not my natural language !

  • Play/pause button won't work

    Ipod Classic 80Gb
    Play/pause button won't work 9/10 times.
    Any idea on how to fix that?

    Besides resetting the iPod, have you attempted restoring it? You can do that by clicking the "Restore" button on the the iPod's Summary page in iTunes.
    Assuming that doesn't work, you can check your [warranty status|https://selfsolve.apple.com/GetWarranty.do] to see if you are still covered for hardware repair. I doubt any 30GB iPods are still under warranty, since they were discontinued over two years ago, but you said you got it in March 2009 - did you purchase it used?
    Whether it's under warranty or not, you can always make a Genius Bar appointment at your closest Apple Store and see if they have any other suggestions, free of charge. If it's a hardware problem, they can replace the iPod for you, but there would be a charge to do so if you're out of warranty.
    Shawn

  • HT3176 Menu button doesn't work

    Menu button doesn't work I can scroll up and down but when I hit the menu it doesn't even push

    This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.

  • Insert SIM no Signal Menu button doesn't work

    Hi,
    I have Virgin Nokia 5800 firmware V40, it's currently locked to the Virgin network. When I place another network SIM ( O2 or Orange) the phone boots up but shows no signal and the menu button doesn't work. I want to unlock and have been given a unlock code by Virgin but I'm expecting to see a SIM Restriction message but nothing. Confused - anyone help or had a similar problem?

    This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.

  • A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

    A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

    I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

    My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

    A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

  • Volume and Power button doesn't work..how do I fix?

    My son's volume buttons or the power button doesn't work.  Is there something I can do to fix these issues?

    Try the following to rule out a software problem.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • "Submit to SAP" Button doesn't work

    Hi to all,
    I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but  the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url]  seems not to work. Where can I find it?
    Thank you very mich,
    Enrico

    Hi Enrico,
    You can download it from the below link:
    http://www.esnips.com/web/arafatfNewFolder/
    Let me know once you are done so that I will delete the link.
    Regards,
    Arafat

  • Can't Add Credit Card (submit button doesn't work)

    Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
    The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
    If it helps, I have the Palm Pre, I'm with O2 (UK).
    Can anyone help?
    Post relates to: Pre p100ueu (O2)

    This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

  • My iPod touch 4th gen white's home button doesn't work the first time I press it, but the second time.

    My home button doesn't work the first time I press it, but the second time.  This is very annoying.  Why is it doing this?

    - Try a reset. It cures many ills and nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -If a hardware problem see:
    fix for Home button

  • HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works.  At Step 11, I clicked Home Sharing Import button doesn't work.

    Help!  I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works.  I followed the steps in http://support.apple.com/kb/HT4527 to the letter.  At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer.  No matter what I try, the Import button doesn't work.  There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import.  The Settings button is clickable but the Import button isn't even live.  In other words, I can see it but not click on it.  I have double-checked my firewall and it is not the problem.  How can I get the Import button to work? 

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

Maybe you are looking for