Captivate 4 - question slides - error message attached to Next button

Hi there
For users who may try to skip ahead and not take quiz questions, I wondered if there's a way to have an error message appear if they try to click Next without answering the question.

Hi Alicia
As you mentioned that the day you imported the audio into Captivate slides you started facing this issue. So try to export the audio from any one of the slide, save it on your desktop, create a new project in captivate, add an image, button on that slide and import the same exported audio. Observe that are you facing the same issue or not. If not, then try to copy and paste the slides in new project with same dimensions.
Hope it helps
Thanks
VJ

Similar Messages

  • In Question slide, When I enable the next button, the button look faded off in HTML 5 output.

    Hi,
    I am enabling the next button in Captivate 7 quiz slide. I am using these slides as CYUs. When I publish the slides, the web version looks fine, but the HTML 5 output shows the next button with faded look. I tried creating a new quiz slide from a separate file and inserting here. still the same issue is cropping. Please help in resolving this issue.
    Given the image for reference.

    Thank you Rod.... I changed the option to "Required - User must take the quiz to continue." Now the next is working .
    Thank you for pointing the right direction. But one quick question.. will the above setting affect my assessment? I have set the pass percentage to 100%...
    My next question - I have a open course menu (TOC). If the learner clicks the Knowledge check page, the knowledge check page is visible, but if you click any other page from knowledge check, it is not going...... by default, it takes to the next page. From that page, you can click any other page... IS this also related to the above option .. pls let me know..

  • Captivate crashes after "Runtime error" message

    Captivate v5.5
    I am creating question slides and when I clicked to edit the text I got the following error message
    The result was Captivate crashed and - of course - I lost my work.
    Does anyone know of this issue and what the cause is and how to correct it ?
    Noel

    FYI.....
    Update on this issue
    This morning I got some great help from Adobe Tech Support, Priyank Shrivastava.
    After his kind help, checking my PC, tweaking some default folders etc I uninstalled and reinstalled Captivate v5.5
    Then I created a brand new project, inserted 3 Multi Choice question with default buttons and when I tried to edit the text box I got the same error message as displayed on my initial posting.
    Priyank had suggested that if the error happens again, maybe my User Account is corrupt and so I am now waiting for my IT people to create me a new profile to see if this fixes the problem. I dont think it will...dont know why, just dont believe it will.
    Unless anyone reading this thread has any suggestions or has had a similar experience - I am at loss what to do.
    I cannot work in Captivate now without saving each time I add a single word or after each and every action - so I dont lose my work when Captivate crashes - which it does now on a regular basis
    I will inform you of any positive developments.

  • SharePoint - authentication question and error message

    When I try to add a data source bound to a SharePoint list, I receive an error message "an error occurred while retrieving SharePoint lists". I'm not sure, but I'm assuming this may be an authentication issue (the Microsoft account I'm using
    does not have access to our SharePoint server, I use a separate account for that). My question is: would this be the cause of the error message and if so, how/where would I set authentication up for the data source?

    More info from ULS viewer:
    02/18/2014 13:56:33.63 w3wp.exe (0x14B8) 0x16C0 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 e973759c-f025-c061-a37a-3d6b6639b7bd
    I have a feeling this is related to ADFS? We aren't supporting ADFS on our farm at the moment.

  • Error Message/Attached Accesory Not Supported By Ipod

    Whenever I lock and unlock my Ipod Mini I get the error message the currently attached accesory is not supported by this Ipod. Does anyone know what this means? My Ipod than freezes usually a couple hours later after getting this message,

    Try to reset it.
    Press and hold the MENU and CENTER buttons until you see the Apple logo. You wanna do this while your iPod is connected to your computer.

  • Question about error message in Adobe Reader

    I reinstalled Reader and now when I try to open a program I get the error message Acrobat Failed to load its Core DLL

    Hi
    Please follow this KB doc: http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html
    Thanks

  • Question about error message in SMTP log

    Does anyone have any idea what this error message is in my log? I see it a couple of times a day.
    table hash:/etc/aliases(0,lock|fold_fix) has changed -- restarting
    Message was edited by: J Moore

    Who says it's an error message?
    Are there any problems with your mail delivery? Anything else in the logs that indicates a problem?
    I don't know specifically but it reads as though something is changing /etc/aliases and postfix is reloading to incorporate the changes. I'd look at what's in that file - preferably before and after it gets changed, to see what's going on. I'd hazard a guess that it's some kind of email address white/grey/backlisting process that's periodically updating the list of emails to allow/deny, but that's just a guess.

  • Error message on unclicked Radio Button

    Hello all, I was wondering how I can generate a unique error message on a required radio button on my form. I have designated the radio button as required already, but instead of the generic "missing fields" error message I would like it to generate a specific one saying "Form Must Be Reviewed with Supervisor Prior to Submission" in addition to the one that pops up when other required fields are not filled.

    One way to do it is to use 2 submit buttons.
    You want to hide the real submit button and use a "fake" submit button (just a regular button) to check the value of the field. If the field is ok then you click the real submit button programmatically.
    On the Click event of the fake submit button (JavaScript):
    if (RadioButtonList.rawValue == "") {
         xfa.host.messageBox("Form Must Be Reviewed with Supervisor Prior to Submission");
    else {
         EmailSubmitButton1.execEvent("click");
    Hope that helps!

  • Error Message when using menu buttons in IE but not chrome

    Hi.
    My recently uploaded site has an issue when using the menu buttons anywhere on the site in Internet Explorer but not on my mac using chrome? I get this error message come up on screen which takes three clicks to go away  MuseJSAssert: Error calling selector function:TypeError: Object doesn't support property or method . Then if I click anything else it pop ups again. Any ideas how to get rid of this? I have tried re-uploading the muse files but the same happens. I even tried uploading the files from a different exported frm muse folder as I saw had worked for someone else on here but no difference? Any help much appreciated.
    Website : vanletteringco.com
    You may get an error that iPage are sorting when opening too, just delete the /root1 in the address bar to see the site?
    Thanks
    Gav

    Hello,
    I am only getting the MuseJSAssert error on the contact page of your site when viewed in Internet Explorer.
    And as I can see you have used a webform from Jotforms which I suspect might be creating issues here.
    I would suggest you to remove the form  once and then upload your website again. if it starts working fine then get the Embed code of your form again from Jotforms and insert it again to check if it works fine or not.
    Please let us know the results of the testing.
    Regards,
    Sachin

  • Error message posted on next  screen

    Hi Friends,
    I have a Maintenance View and I am using Extended Maintenance Events to validate some entries entered by the user in SM30. I am trying to display an error message when there is an error in the record entered by the user. It is one step maintenance.
    This error message is being displayed on an other blank screen i.e. the program terminates and displays the error on other screen and the erroneous changes or new records are not created. My requirement is to display the error on the same screen and let user change the record entered.
    Thanks
    Braham

    Hi,
    I am using BEFORE SAVE event.
    I am trying to show an error message.
    Message e000  with 'Messsage'.
    I tried
    Message s000 with 'Message' display like 'E'. But this command is not accepted while activating the code. So was not able to use it

  • Captivate 7 question - slide with audio and light boxes not functioning properly

    I am currently working a project and cannot figure something out. 
    I have a slide with 9 smartshape buttons on it.  When each button is clicked it brings up a lightbox.  Each lightbox has it's own close button. When the lightbox is closed by the user then the user immediately sees the 9 button screen and can choose another button to view and read, and so forth.  I have the lightboxes working fine.
    Now, I added text to speech.  It is a mere 15 seconds in length, but it contains some important content and the directions.  I want the text to speech audio to stop playing if the user goes ahead and clicks on one of the 9 buttons which then brings up a lightbox.  I want the audio to then resume when they close the lightbox.  OK I have all of that working in a technical sense.
    I've also tried this advanced action, but this stops the Audio entirely, however it does solve the autoadvance issue. so I am just trading issues.
    I also have  "back and next" nav buttons on the slide, so the user must click one or the other to proceed off the slide.  Ok those worked.
    Here is the issue.  Once I added the text to speech audio, at the end of 17.3 seconds, whatever lightbox the user may be viewing and they hit the close lightbox button, captivate automatically sends the user to the next slide.  No clicking "Next" or anything.  I can't figure out why this is occurring. 
    Prior to adding audio the slide worked as it should with the user being able to click each of the 9 buttons to "read some info" then close it and click another button on the slide, etc.  They could do this in any order they wanted. 
    When I added the audio, I set the advanced actions so if a user clicked on one of the buttons, the audio would stop playing until they came back to the main screen.  Ok no problem getting that to function - except it stops functioning at the end of 17.3 seconds. 
    What am I missing?
    Thanks for any help!!!
    Michelle

    Correct I have only 15 seconds of audio with the slide.  no audio with any of the light boxes.  Those are "read only" light boxes.
    If the user clicks a shape button early, before the entire audio has played, I want the audio to stop, so the user can read the lightbox info, then as they click back to the slide away from the lightbox, I want the audio to resume playing - so they can hear the rest of the audio.  But,  this is where is doesn't function properly as when the audio finishes playing at 15 seconds.  The next shape button the user clicks on to shows the lightbox, but when they click to close the lightbox, the lightbox closes then sends the user to the next slide.  They haven't had a chance to view any of the other shape buttons and the information found in those corresponding light boxes. 
    I hope this clarifies.
    Any thoughts?
    Michelle

  • Error Message when closing Captivate v4

    I have just started to get the below error message when I close down Captivate 4.
    Things seem (repeat ...seem) OK when I open Captivate again, but any error message is a worry, especially in Captivate.
    Does anyone have any ideas what this is all about, and how to fix the problem it refers to?
    Noel
    Staffordshire
    England

    If you want help you may have to provide some more information … and a Forum- or web-search might also be worth trying.
    http://forums.adobe.com/message/4509053
    http://forums.adobe.com/thread/1025148
    http://forums.adobe.com/message/4495683

  • File Sender Scenario - Mapping error message

    Hi All
    Scenario
    I am trying to develop a test scenario where a record is read from the file and sent to R/3 using RFC (Bapi)
    So i believe this will involve a file adapter as sender and a RFC adapter as receiver, I have configured data types, message types, message mapping, interface mappings, sender determination, receiver determination etc.
    Problem
    When i put the text file in the polling directory the file is read, but there is an error,
    On checking Processed XML message in SXMB_MONI I see that the following steps listed
    1 - Inbound message (CENTRAL)
    2 - Receiver Determination
    3 - Interface Determination
    4 - Receiver Grouping
    5 - Message Branch According to Receiver
    6 - Request Message Mapping
    7 - Request Message Mapping
    Step 1 - 6 does not show any error message, step 7 has an error with the following message
    <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_basic_paycreate_file_to_rfc_map~</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException<;/SAP:P2>
      <SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
    Additional Information
    My Business System Commnication channel has a Sender File adapter, this file sender is configured to read from file system from a certain directory and message protocol is File Content Conversion.
    In Content Conversion parameters input fieldname and input separator are configured (does anything else need to be configured in this section?)
    My input file is of the structure aaa,bbb,ccc,ddd,eee,fff,ggg
    My Data Type is of the structure
    <data header>
         <aaa></aaa>
         <bbb></bbb>
         <ccc></ccc>
         <ddd></ddd>
         <branch1>
                   <eee></eee>
         </branch1>
         <branch2>
                   <fff></fff>
         </branch2>
         <branch3>
                   <ggg></ggg>
         </branch3>
    </data header>
    Questions
    First question is why is there 2 instance of Request message mapping showing up in the monitor? Isn't this supposed to show up only once?
    Second question it appears that the problem is something to do with Mapping (Message Mapping) but i tried to test the message mapping manually using the data generated in the payload and it passes the mapping successfully.
    Third question, how is the input flat file converted to the complex structure of data type (as mentioned in additional information above) is this done by the input.filedNames that assigns the corresponding values from flat file to the data type?
    Fourth question - is there a way to run the process step by process (as a step through in other programming IDEs?) so the problem can be more easily identified?
    Thanks
    Anant

    Hi  All
    I little update - it appears that some of the scenarios developed earlier that were working earlier are now also failing at the same process of mapping with this error message.
    So i am suspecting that this is not a problem with the mappings in  my scenarios but rather a some technical setting related to how XI invokes this class - com.sap.aii.utilxi.misc.api.BaseRuntimeException.
    Does any one have any ideas what i can check to confirm this? Whether the problem is in the technical setting or the scenario configuration?
    thanks
    Anant
    error message attached.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_CheckDeposit_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_CheckDeposit_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • Flash error messages

    I'm using Flash .SWFs that incorporate the Flash zoom and pan component. When I import the .SWF into Captivate, I get an error message (Error #2044: Unhandled ioError:. text=Error #2035: URL Not Found. URL: file:///C:\Documents and Settings\Desktop\Testing\ILS13L.jpg).
    However, the .SWF imports without a problem. Every time I click on the slide in the Captivate project, I have to "dismiss" the error to continue.
    It all works fine in the published Captivate .SWF. It's only during editing that it is a problem.

    I've branched this into a new discussion.  The other thread wasn't really manageable, and I wanted to make sure we tracked and responded to this.
    Were you able to get this issue resolved?
    If not, what's the error message that you keep getting?

  • Error message for radiobuttongroup using report_attribute_error_message

    Hi,
    We are displaying error message on the submit button of a form in web dynpro abap application. We have different UI elements in the form which are mandatory to enter by the user.So we are using 'CALL METHOD lo_message_manager->report_attribute_error_message' method to display error.
    When user click on the error message control will go the UI field which is caused for error.
    This works fine for INPUT,DROPDOWNBYKEY,TEXTEDIT,RADIOBUTTON UI elements.
    But error link is not working for RADIOBUTTONGROUPBYKEY/RADIOBUTTONGROUPBYINDEX ui elements.
    Is this problem is with WEB DYNPRO ABAP or am i missing any property settings. Does SAP Web Dynpro ABAP provide this functionality for RADIOBUTTONGROUPBYKEY/RADIOBUTTONGROUPBYINDEX?
    Please help us to resolve the problem.
    Below attached written code for reference.
    CASE lo_action->name. WHEN 'SUBMIT'.
    IF lv_radio IS INITIAL.
    *    REPORT message
       call method lo_message_manager->report_attribute_error_message
         exporting
           message_text              = 'Please select something from radio button grp by key.'
           element                   =  lo_el_radio_node
           attribute_name            = `RADIO`
    *        params                    =
    *        msg_user_data             =
    *        is_permanent              = ABAP_FALSE
    *        scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
    *        msg_index                 =
    *        cancel_navigation         =
    *        is_validation_independent = ABAP_FALSE
      ENDIF.
        IF lv_text IS INITIAL.
    *    REPORT message
       call method lo_message_manager->report_attribute_error_message
         exporting
           message_text              = 'Please KEY IN SOMETHING THE TEXTEDIT BOX......'
           element                   =  lo_el_text_edit
           attribute_name            = `TEXT`
    *        params                    =
    *        msg_user_data             =
    *        is_permanent              = ABAP_FALSE
    *        scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
    *        msg_index                 =
    *        cancel_navigation         =
    *        is_validation_independent = ABAP_FALSE
      ENDIF.
        IF lv_radio_group  IS INITIAL.
    *    REPORT message
       call method lo_message_manager->report_attribute_error_message
         exporting
           message_text              = 'Please select something in second radio group.'
           element                   =  lo_el_radio
           attribute_name            = `RADIO_GROUP`
    *        params                    =
    *        msg_user_data             =
    *        is_permanent              = ABAP_FALSE
    *        scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
    *        msg_index                 =
    *        cancel_navigation         =
    *        is_validation_independent = ABAP_FALSE
      ENDIF.
    ENDCASE.

    Hi Smitha
    You declare as below :
    *---- SELECTION-SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK b1.
    SELECT-OPTIONS : s_werks FOR vbap-werks .                 "Plant
    SELECTION-SCREEN END OF BLOCK b1.
    *Selection Screen validation
    AT SELECTION-SCREEN .
      IF s_werks-low IS NOT INITIAL.
        SELECT SINGLE werks            "Plant
        FROM t001w
        INTO s_werks-low
        WHERE werks = s_werks-low
        and werks in ( '2000','3000','4000' ).
        IF sy-subrc NE 0.
          MESSAGE e000 WITH text-t48.
        ENDIF.
      ENDIF.
    if its a parameter just replace s_werks as p_werks
    Edited by: Martina Floriette on Feb 21, 2009 6:01 AM

Maybe you are looking for