Captivate 4 with .flv fails when loaded to LMS

I've created a Captivate 4 project that has several .flv inserted. When I publish it as a scorm file (zip) and import it to Chalk LMS the videos don't work. The video files are in the zipped file. What do I do to get them to play? Help I'm working to deadline.

Do the same modules evidence this behaviour when published and played outside the LMS, e.g. from a web server or on your hard drive?
If not, it's possible that some setting in the LMS is over-riding what happens at playback.  You could try checking the box under LMS Customisation for Never Send Resume Data and see if that seems to make any difference.  If the LMS is maintaining a record of some previous attempt at the same module then turning off Resume Data might show that up.

Similar Messages

  • Cannot open the document with 'Composition failed to load'.

    After confronting an error message during the publishing, I cannot re open the document with 'composition failed to load' message.
    I desperately need to save this document! is there any chance to save it?
    the screenshot is here.

    Thank you for your help and advice.
    It is great to be fixed in near future. good news!
    Kim Kyoung Hong
    Sent with Airmail
    켜짐 2014년 10월 14일 에서 오후 3:58:58, Bharadwaj ([email protected]) 작성됨:
    Cannot open the document with 'Composition failed to load'.
    created by Bharadwaj in Edge Animate CC - View the full discussion
    This is the error you are getting when you are opening the published content on web. This is a bug, but you can use the below fix.
    Open the publish/web/index_edge.js and remove the "use strict"; statement at the beginning.
    This will fix the problem. We will address this issue in the next release.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6822974#6822974
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Edge Animate CC by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • BUG: Playback Fails When Loading A Random Video - Firmware 1.2

    I've been looking all over on where to post a bug, and for a fix for this bug I found. Not many seem to be having this problem (I assume not many are trying to randomly play a video from a video playlist)
    BUG: Playback Fails When Loading A Random Video
    iPod FIRMWARE: 1.2
    PROBLEM (1): When pressing "Play" on a video playlist or on 'Music Videos' while the iPod is set to Random->Song, the iPod displays a white playback screen, displays song 0 of 0, empty duration bar and a duration time of 0:00/-0:00.
    PROBLEM (2): After successful playing a seleted video within a video playlist or music video list, the iPod attempts to play a randomly choosen video (HDD clicks abnormally) but times-out and returns the user to the Playlist selection screen.
    iPod MODEL: 60GB Video - Black [Bought in NOV 05]
    If anyone knows how to report a bug, or anyone else having this problem (Try it on you iPod, post your results!) let me know!

    I've been looking all over on where to post a bug...If anyone knows how to report a bug let me know!
    If you want to post a bug report for Apple to see, then this wouldn't be the place to post it (Apple employees rarely look on these forums; all other regular posters on here are just users that like to help others).
    To tell Apple about this, select "Bug Report" under "Feedback Type" on their Feedback form for iPods here -> iPod Feedback
    I hope this helps you,
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • Captivate 5 quiz review not showing correct answers when loaded to LMS

    Hello All. I would really appreciate some help please. Despite the quiz review working correctly when published, i.e. both 'your answer' and 'the correct answer' captions appear in the review, on loading to LMS the review caption does not show the 'the correct answer is' , but instead 'you did not answer this question completely'.
    Any ideas why this should be the case? I've attached screen shots of my quiz preferences for completenes.
    Many thanks in advance.
    Janey

    Do the same modules evidence this behaviour when published and played outside the LMS, e.g. from a web server or on your hard drive?
    If not, it's possible that some setting in the LMS is over-riding what happens at playback.  You could try checking the box under LMS Customisation for Never Send Resume Data and see if that seems to make any difference.  If the LMS is maintaining a record of some previous attempt at the same module then turning off Resume Data might show that up.

  • [SOLVED]Get [FAIL] when loading user specified modules.

    That is it, when the system is booting i get a [FAIL] message when loading user specified modules after upgrading udev, and the kmod new module handling or something as say in the news. I dont have a modprobe.conf or a modprobe.conf.pacsave file either and creating a modprobe.conf file doesn't solve the problem. The strange thing is that the modules are loaded anyways. I mean the ones that are specified in rc.conf. I dont know if the system [FAIL] to load that modules or others...The system works fine for now too.
    Thanks.
    PD: sorry if you notice my poor english.
    Last edited by Hyugga (2012-01-22 23:09:02)

    I had the same problem and removing the governor performance from rc.conf solved the problem. I tried however to remove both governors and only leave powernow-k8 (this is the only one that works for me) leaving rc.conf like this:
    MODULES=(brcmsmac powernow-k8)
    When I boot the laptop and check which governors are available and being used I get the following:
    [netlak@soulrebel ~]$ cpufreq-info
    cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
    Report errors and bugs to [email protected], please.
    analyzing CPU 0:
    driver: powernow-k8
    CPUs which run at the same hardware frequency: 0
    CPUs which need to have their frequency coordinated by software: 0
    maximum transition latency: 8.0 us.
    hardware limits: 800 MHz - 2.10 GHz
    available frequency steps: 2.10 GHz, 1.50 GHz, 800 MHz
    available cpufreq governors: performance
    current policy: frequency should be within 800 MHz and 2.10 GHz.
    The governor "performance" may decide which speed to use
    within this range.
    current CPU frequency is 2.10 GHz.
    This like as if the ondemand governor would not be available but when unplugging the laptop and check again I get this:
    [netlak@soulrebel ~]$ cpufreq-info
    cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
    Report errors and bugs to [email protected], please.
    analyzing CPU 0:
    driver: powernow-k8
    CPUs which run at the same hardware frequency: 0
    CPUs which need to have their frequency coordinated by software: 0
    maximum transition latency: 8.0 us.
    hardware limits: 800 MHz - 2.10 GHz
    available frequency steps: 2.10 GHz, 1.50 GHz, 800 MHz
    available cpufreq governors: ondemand, performance
    current policy: frequency should be within 800 MHz and 2.10 GHz.
    The governor "ondemand" may decide which speed to use
    within this range.
    current CPU frequency is 800 MHz.
    This shows that the ondemand module can be autoloaded when needed, so I leave rc.conf only with powernow-k8.
    Thanks for your help.

  • I've been having a problem with Safari failing to load about 10-20% of pages.

    Safari is returning the message 'failed to connect to server' but sites opening fine in other browsers so ISP connection seems fine.
    Safari will repeatedly fail to open a page when it is on the same server/site as other pages that load correctly and I can navigate to other pages after a failed page load.
    I'm also able to return an hour or so later and open the pages that failed but no idea why I'm getting temporarily blocked out from some pages/links.
    Problem has only occurred in the last few days but seems persistant.
    Any advice would be greatly appreciated.
    I'm using the latest version of snow leopard on a 2009 MacBook Pro.
    Many thanks,
    Paul

    Hi...
    Use OpenDNS for better speed, more security, it's free, and should fix the can't connect to server issue.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these numbers exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK and restart your Mac.
    More about OpenDNS here.
    Topic : Manually provided DNS server addresses are higher priority than DHCP's

  • JApplet with JFrame fails to load in browser

    I have been making a Java program that runs a JApplet the program operates perfectly in NetBeans (the Java development kit), but when I run it in the browser, it fails to load.
    The code is...
    import java.awt.*;
    import javax.swing.*;
    public class CalculatorMain extends javax.swing.JApplet {
    private Difficulty difficulty = new Difficulty();
    private Troop[] troop = new Troop[7];
    private Army army = new Army(troop);
    private Calculator calculator = new Calculator(difficulty, army);
    private CalculatorListener listener;
    public void init(){
    JPanel supreme = new JPanel();
    supreme.setLayout(new BorderLayout());
    for (byte i = 0; i < 7; i++) {troop[i] = new Troop();}
    DifficultyPanel diffpanel = new DifficultyPanel(difficulty);
    ArmyPanel armypanel = new ArmyPanel(troop);
    JButton calbut = new JButton("Calculate Experience");
    JLabel xpDisplay = new JLabel(" ");
    CalculatorPanel calpanel = new CalculatorPanel(calculator, calbut, xpDisplay);
    JFrame frame = new JFrame();
    listener = new CalculatorListener(xpDisplay, calculator, diffpanel, armypanel, calpanel);
    calbut.addActionListener(listener);
    supreme.add(diffpanel, BorderLayout.WEST);
    supreme.add(armypanel, BorderLayout.CENTER);
    supreme.add(calpanel, BorderLayout.SOUTH);
    frame.add(supreme);
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.pack();
    frame.setVisible(true);
    As I said, it does not work in the web browser (which is Internet Explorer 6.0). In the information window I open, the message is...
    Java Plug-in 1.5.0_06
    Anv�nder JRE-version 1.5.0_06 Java HotSpot(TM) Client VM
    java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkExit(Unknown Source)
         at javax.swing.JFrame.setDefaultCloseOperation(Unknown Source)
         at CalculatorMain.init(CalculatorMain.java:31)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Exception in thread "thread applet-CalculatorMain.class" java.lang.NullPointerException
         at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
         at sun.plugin.AppletViewer.showAppletException(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Any idea what might be wrong?

    If you look at your error message you'll see...
    java.security.AccessControlException: access deniedAh. Problem # 1 caused at
         at CalculatorMain.init(CalculatorMain.java:31)Problem #2
    java.lang.NullPointerExceptionat
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)So it says it can't display the init error message. That's ok this should go away when you fix bug #1

  • DVD not opening with main menu when loaded.

    I created a DVD with three short movies and three slide shows. I've made several similar type DVDs and they all open with the main menu when loaded. But in this case, when loaded in the player, it opens with the first movie, not the main menu.
    Any advice would be appreciated.

    Open Map View within iDvd. Is there a movie in the top / first box? If so, select it (one click) and hit the delete key. Now preview your iDvd. If it plays as expected (including the menu and buttons) then proceed with encoding and burning it to Verbatim dvd-r.
    Message was edited by: SDMacuser

  • Database Logon Failed when loading Access mdb that use a system mdw

    I am trying to get my Report Viewer ASP.NET application running 11 R2 SP3 to open a report that uses Access database with a system database file (mdb and mdw file)
    the report runs fine in the designer and it runs fine on the developer test computer
    but the production environment that does not have the full Crystal Designer installed just the runtime engine (but does have the full MSAccess running) cannot load the database
    i keep getting "Database Logon Failed"
    SWIP Reports
    Error Exporting Report
    Report:     Help Desk Reports Over 3 Days
    Server Name:     \\poseidon\IT\Databases\itdept.mdb
    Database Name:     \\poseidon\IT\Databases\itdept.mdb
    User:     GLOBAL\ADMINISTRATOR
    IP:     127.0.0.1
    ============================================================
    | Exception Information
    +----------------------------------------------------------------------
    |  Exception Message:     Database logon failed.
    |  Exception Source:     CrystalDecisions.ReportAppServer.DataSetConversion
    |  Inner Exception:          
    |  Begin Stack Trace:
    |        at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.T_
    |          hrowDotNetException(Exception e)
    |        at CrystalDecisions.ReportSource.EromReportSourceBase.Exp_
    |          ortToStream(ExportRequestContext reqContext)
    |        at CrystalDecisions.CrystalReports.Engine.FormatEngine.Ex_
    |          portToStream(ExportRequestContext reqContext)
    |        at CrystalDecisions.CrystalReports.Engine.ReportDocument._
    |          ExportToStream(ExportOptions options)
    |        at CrystalDecisions.CrystalReports.Engine.ReportDocument._
    |          ExportToHttpResponse(ExportOptions options, HttpRe_
    |          sponse response, Boolean asAttachment, String atta_
    |          chmentName)
    |        at CrystalDecisions.CrystalReports.Engine.ReportDocument._
    |          ExportToHttpResponse(ExportFormatType formatType,_
    |          HttpResponse response, Boolean asAttachment, Strin_
    |          g attachmentName)
    |        at reports.PushReport(ExportFormatType expType, String Co_
    |          ntentType, String Ext, Boolean Popup)
    |        at reports.exportReport(String strExpFmt)
    +----------------------------------------------------------------------
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    does anyone have any advice on why this is failing only on the server but is not failing on the developer or the designer computers.

    public Reports(String RptPath)
                this._ExpOptions.ExportDestinationType = ExportDestinationType.NoDestination;
                this._ExpOptions.ExportFormatType = ExportFormatType.NoFormat;
                this._RptDoc = new ReportDocument();
                this._RptDoc.Load(RptPath, OpenReportMethod.OpenReportByTempCopy);
                login();
    private void login()
                if (!_IsLoggedIn)
                    try
                        String dbName = this._RptDoc.DataSourceConnections[0].ServerName.ToString();
                        for (int i = 0; i < this._RptDoc.DataSourceConnections.Count; i++)
                            this._RptDoc.DataSourceConnections<i>.SetLogon(uid(dbName), pwd(dbName));
                        foreach (ReportDocument Sub in this._RptDoc.Subreports)
                            dbName = Sub.DataSourceConnections[0].ServerName.ToString();
                            for (int i = 0; i < Sub.DataSourceConnections.Count; i++)
                                Sub.DataSourceConnections<i>.SetLogon(uid(dbName), pwd(dbName));
                        ConnectionInfo coninfo = new ConnectionInfo();
                        coninfo.DatabaseName = this._RptDoc.DataSourceConnections[0].DatabaseName;
                        coninfo.ServerName = this._RptDoc.DataSourceConnections[0].ServerName;
                        coninfo.UserID = this._RptDoc.DataSourceConnections[0].UserID;
                        coninfo.Password = this._RptDoc.DataSourceConnections[0].Password;
                        foreach (CrystalDecisions.CrystalReports.Engine.Table crtbl in this._RptDoc.Database.Tables)
                            TableLogOnInfo logoninfo = crtbl.LogOnInfo;
                            logoninfo.ConnectionInfo = coninfo;
                            crtbl.ApplyLogOnInfo(logoninfo);
                        _IsLoggedIn = true;

  • BPC 7.5 NW -- Data Manager Import Fails When Loading 40,000 Records?

    Hi Experts,
    Can't believe I'm posting this because the Data Manager component has always been one of the best parts of BPC.  But, since we got SP04 applied last week, every IMPORT process that I've run that has more than 40,000 records fails out.
    The result logs show that the CONVERT task completes just fine, but it doesn't really show the LOAD task.  ...Not exactly sure what's going on here.  So far I've also taken the following two steps to try for resolution:
    (1.)  Re-added the IMPORT package in Organize Package List from the Library to have a "fresh" version.  Didn't help.
    (2.)  In the "Modify Package" screens, there is a PACKAGESIZE parameter that is 40,0000 by default...  I've been able to locate that in BI using transaction RSA1 and have changed it to 10,000,000.  Saved it.  Tried it.  Didn't help either
    Has anyone seen this kind of behavior before?
    Thanks,
    Garrett

    Update -- This problem may now be resolved.
    I have been able to conduct test IMPORTs of 48,000, then 96,000 and then 1.7 million records.  All were fine.
    It turns out that that difference is that the text files were sorted by amount in the ones that failed.  They were sorted by GLAccount in column A for the ones that succeeded.
    Edit:  Yep, all files loaded normally when re-sorted by GLACCOUNT, etc. on the left-hand side.  Apparently, when you're doing a lot of records that might confuse the system or something
    Edited by: Garrett Tedeman on Nov 18, 2010 11:41 AM

  • Some GIFs and JPGs appearing with yellow "wash" when loading in Safari

    Hi,
    I've flicked through forums, google, and called my top graphics people but nobody can seem to help, or has ever even heard of, my issue.
    Here it is in a nutshell:
    Some GIFs and JPGs appear with a yellow "wash" when being loaded in Safari. I can confirm this is happening on 3 different Macs, and even on a PC running Safari.
    Safari 3.1.1 on Windows XP
    Safari 3.1.2 on Mac OSX 10.5.5
    Here's some examples of it occurring:
    http://staging.tomatosource.com.au/test/bad.jpg
    http://staging.tomatosource.com.au/test/bad.gif
    You might need to refresh the page in Safari a couple of times to see the flicker but it's there.
    I've tried:
    - resaving images with and without "progressive" and "interlaced"
    - a variety of different colour palettes
    - taking a screenshot of the image, putting back into Photoshop and resaving
    Has anybody seen this issue before? Unfortunately I can't go live with this site until I fix this very strange error.
    Any comments would be greatly appreciated!
    Cheers,
    Jase.

    Totally independently from your current problem, Safari is cr@p. Dump it.
    All Apple applications, from the Finder through Preview and iPhoto to Safari, assign Monitor RGB to ALL untagged images, even if they were created or saved in sRGB.
    The only current properly color-managed web browser is Firefox 3.0.1. Just keep in mind that you have to enable color management deep inside the guts of Firefox.
    See this existing thread in the Adobe Photography forum:
    Ramón G Castañeda, "Beware of using Adobe Web Galleries" #49, 14 Sep 2008 4:52 pm

  • Apert. fixes/messes with picture style when loading.

    Hi, Im using a canon rebel Xti. and I love using aperture except for the fact that it changes my picture style and many other things to its own standard when it loads from my card. I can see in the preview its a totally different images, then it loads onto my computer and when i click it by the next load the image is fixed in aperture's style. When i load it with other photo programs, the pictuer style stays. Anyone know how to let aperture know I want to be HANDS OFF my image until I can do the fixing? Seriously the image looks completely different with lighting exposure etc

    when shooting RAW, the camera captures as is ... the picture style info is a set of instructions that canon's dpp software uses to translate the image ... this is the only program i am aware of that will use this proprietary info, which other programs read it for you ???
    RAW images are raw data ...
    aperture reads your RAW, not canon's instructions ...
    so technically, aperture is HANDS OFF your image, you are trying to add adjustments with the picture styles ...
    the preview is the embedded jpg that the camera creates for teh thumbnail, etc ...
    what are the "many other things" it changes ???
    Message was edited by: tidysteve
    more info from a search of the forum ...
    http://discussions.apple.com/search.jspa?threadID=&q=canonpicturestyle&objID=c184&dateRange=all&userID=&numResults=15&rankBy=10001

  • virtual-directory-mapping fails when loading JSPs in 8.1

    I'm using portal 8.1 sp3 and trying to get my JSP includes to include JSPs from a virtual directory.
              I can load HTML files from the working directory perfectly:
              <jsp:include page="/myprods/myProd1.html" />
              But whenever I try to load JSPs it fails:
              <jsp:include page="/myprods/myProd1.jsp" />
              Is this a known (bug) and expected behavior?
              My weblogic.xml setting:
              <virtual-directory-mapping>
              <local-path>c:/wls-domains/portal_servers/testcontent</local-path>
              <url-pattern>/myprods/*</url-pattern>
              </virtual-directory-mapping>
              And I have C:\wls-domains\portal_servers\testcontent\myprods which contains both myProd1.html and myProd1.jsp
              Note I cannot put my JSP's pre-compiled class in the applications classpath, I'm expecting the jsp:include to resolve all this itself.
              The error I get when trying to include the JSP is as follows:
              Error opening /SamplePortlet/index2.jsp.
              The source of this error is javax.servlet.ServletException: [HTTP:101249][ServletContext(id=3477358,name=myProject,context-path=/myProject)]: Servlet class jsp_servlet._myprods.__myprod1 for servlet /myprods/myProd1.jsp could not be loaded because the requested class was not found in the classpath C:\wls-domains\portal_servers\user_projects\applications\myApplication\.workshop\output\myProject\WEB-INF\classes;C:\wls-domains\portal_servers\user_projects\applications\myApplication\myProject\WEB-INF\classes;
              [followed by loads more classpath values]
              at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:824) at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:254) at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:188) at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:535) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:373) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
              [followed by loads more stack trace]
              Thanks in advance for any assistance
              Martin

    Have you received any feedback to your question ??
    We have recently upgraded from WLS 7.0 to WLS 9.1 and are experiencing the same unexpected behaviour.

  • Connection with Ldap failed when Upgrade to Colfusion 8

    Hi,
    I have a problem with cfldap tag used in CF8. I have a cfldap tag defined in my application which works fine on CFMX7. But the moment I installed CF8, it gives me an error - "Connection to LDAP server failed."
    My cfldap tag goes as below:-
    [CFLDAP NAME="qLDAP"
    START = "O=myCompany,C=valueOfC"
    SERVER="ldapServerName"
    FILTER="(alias=myLdapAlias)"
    SORT="SN,GIVENNAME,ALIAS"
    ATTRIBUTES= "ALIAS,SN,MODIFYTIMESTAMP"
    ACTION="QUERY"
    SCOPE="SUBTREE"
    TIMEOUT="60000"
    referral="yes"
    secure="CFSSL_BASIC"
    USERNAME="cn=valueOfcn, ou=contractor, o=myCompany, c=valueOfc"
    PASSWORD="myLdapPassword"
    PORT="636"]
                       [cfdump var="#qLdap#"]
    The wierd thing is when I remove secure,username,password & port attributes from the above CFLDAP tag, it works fine & gets me LDAP results. The moment i put these attributes back in the CFLDAP tag, it fails. I had installed ssl secure on my IIS too. what else am I missing ?
    My error is - "Connection to LDAP server failed."
    When I expanded the stack trace, I get the following :-
    coldfusion.tagext.net.LdapTag$UnknownHostException: Connection to LDAP server failed.
    Need your help...............

    What is your current build?
    If you are getting a yellow triangle, most likely either the update.zip or update.xml are corrupt. You should be able to delete both files and try updating again.
    I used to have a:
    K1_A301_14_14_120109_US

  • Attempting to construct LDAP query with getobject fails when passing string

    Hello.
    I have a very simple question. I am trying to pass a constructed LDAP string to getobject and it fails, but works otherwise.
    ldapStr = chr(34) & "LDAP://" & "CN=Security Group" & ",OU=Security Groups,OU=SomeOU,DC=subdomain,DC=domain,DC=com" & chr(34)
    Set objGroup1 = GetObject("LDAP://CN=Security Group,OU=Security Groups,OU=SomeOU,DC=subdomain,DC=domain,DC=com")
    Set objGroup2 = GetObject(ldapstr)
    objGroup1.GetInfoobjGroup2.GetInfo
    "objGroup1.GetInfo" works, while objGroup2.GetInfo fails with "(null): Invalid Syntax". I have tried escaping using a backslash (\) before the commas and forward slashes but same thing. I was hoping someone might be able to
    explain why getObject is not allowing me to pass this string when connecting via LDAP.
    Thanks for your help.

    Or this:
    strGroup="Security Group"
    ldapStr= "LDAP://CN=" & strGroup & ",OU=Security Groups,OU=SomeOU,DC=subdomain,DC=domain,DC=com"
    Just cat the strings.  Don't add extra quotes.
    ¯\_(ツ)_/¯

Maybe you are looking for