Captivate 5.5 and Audition 5.5 not linking

I have Captivate 5.5 installed and have downloaded and started using the trial version of Audition . I am unable to get the 2 programs to see each other. In captivate when I edit audio. mu edit with Audition button is still grayed out.
I have tried with only captivate running, both running , Audition started then launching captivate.
Nothing seems to work.
Do I need to do something to link the 2 programs so I can use Audition to edit my content?
Thanks
David

Have not tried editing and then importing. Maybe I will try that with my next project. I think
you are correct it only works if you buy the entire learning suite.
In my opinion that is a really bad idea as I can't justify the expense of the whole suite when all I really need are these two programs.
Oh well I'll play through the trial, but if I can't roundtrip it just isn't viable.

Similar Messages

HT204347 pages: just book a new mac book pro and my "Pages" is not linking with icloud

pages is not linking to my iCloud

Hi,
Have you looked at the following support docs?
http://support.apple.com/kb/HT4527
http://support.apple.com/kb/HT4889
Jim

Captivate 3 - Continue and Review Quiz Button Not Working

I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

Hi there
Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
I'll send you back a file that you can use to test and see if the link works.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Photoshop CC and Audition CC is not compatible with the high resolution and small screen that my computer have.

Hello everyone. Recently I bought the New Razer Blade (2014). It has a high resolution of 3200 x 1800 and a screen size of 14 inch. It is that I downloaded the Photoshop CC that I realize that the words are so small it is actually causing a problem for the users. I searched online for helps and learned that the only way to change this is to wait for the developers of the Photoshop CC to make and update to make it compatible. The source of this idea is from a guy have the same computer and the same problem. He updated his Lightroom and the interface ungraded into one that he can use with ease and he hopes that the Adobe company will update Photoshop CC also and fix the resolution problem too. I thought that after another update, Photoshop CC will have it visual update too. However, the last update from a few days ago didn't solve this problem. I wonder if The Adobe company knows about this problem and that's the main reason I'm starting a discussion on this topic. The same goes to the Audition CC and the Premiere Pro CC. These 3 are the most important tools for my and this computer is the only good one that I can have right now. I have tried lowering my resolution but everything else became difficult to use. If I'm using the Photoshop CC, I of course wouldn't want to use a resolution that is too low to edit my pictures.
This is my problem and I wish someone can do something about the visual updates of Photoshop, Audition, and Premiere Pro so that they are compatible with the New Razer Blade (2014) 14 inch screen. Just like Lightroom.

Hi,
The video features for Windows 32 bit systems are no longer supported starting with Photoshop CC (14.0).
Sorry,
steve

New hard drive and OSX install but not linked to my Apple ID

My hard drive died on my MacBook Pro (2012) and so I had a new one put in. Before this they managed to save a back up of all my folders, files, pictures etc. They then re installed my OSX software (not my original as that was Lion, I think this one is Mountain Lion - it's version 10.8), and started up my computer to put my 'back up' of my folders etc onto the computer before returning it to me. However, by starting up the computer and going through the welcome section, they have logged in without my Apple ID and so my computer is not synced to that apple account. This computer is now not registered with my apple account. This means, my iLife is gone (iPhoto etc). How can I restart and have the computer linked with my Apple account. I need to be able to sync up to access my iLife, my previous purchases such as Pages, and sync my iPhone with the computer again.
How can I fix this?

EmmaL86 wrote:
Before this they managed to save a back up of all my folders, files, pictures etc. They then re installed my OSX software (not my original as that was Lion, I think this one is Mountain Lion - it's version 10.8),
'They" are Apple technicians or an AASP tech? I had a similar situation where Mt. Lion was installed on my MBP, by a genius bar technician, which originally came with Lion. The solution was to reinstall Lion. Then to install Mt. Lion, I had to get a redemption code from Apple and then install it. This then connected my ID with Mt. Lion.
If you have purchased Mt. Lion, it should still be in your App store account. If you have not purchased it, consider installing Mavericks instead (it is free).
I suggest that you start the MBP with the OPTION-COMMAND-R keys down. The display will show a revolving globe and proceed with the installation. This connects with the Apple servers and installs the original OSX. You will need a solid Internet connection.
Ciao.

Saved and publieshed Projects are not linking to the enterprise project types

Hi
We have 15 enterprise project types, when we create a project we will select that EPT's and create projects.
After create the project -- saving and Publishing -- server settings -- change or restart work flow -- it must show the project under the EPT which we selected but the problem is that it is showing all the projects in None.
We tried to asscoiate the project to the EPT but still it is ssowing up in basic project paln which we are not using.
Can any one had faced this kind of issue please revert..
Thanks for the assistance in advance.
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Usually it means there's a failure in the workflow. A couple things:
1) Check the ULS log.
2) Try creating the projects from a non-SysAdmin account - which typically doesn't have a user profile - which causes workflow to fail.
3) Try creating an EPT with no workflow and see if you get the same results.
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone for security purposes (not linked to cloud, mobile, Microsoft, Adobe, etc)?

We have installed a trial version of Photoshop Elements and plan to do so for Premier Elements. However, for security reasons, it is of no use to us unless we can install and use it standalone (not linked to cloud, mobile, Microsoft, Adobe, etc.). Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone as described above? If so, what do we need to do regarding installation/configuration/patching to test this? Thanks in advance.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

Aol and yahoo not linking

I am frustrated beyond words ever since updating to Maverick. My AOL and Yahoo accounts are not linking so I am not recieveing any new mail from those accounts not to mention i have to force quit in order to get out of mail. Is there any sollution to this aside from having to go in to Apple? I can't believe how time consuming and frustrating this is.

I'm surprised no one figured it out. I stumbled upon the answer. It's one of the two little boxes in the upper right hand corner of the timeline. The left one (linked) next to the snapping box.

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

Audio and video still won't link

Hi,
I have an ongoing problem with linking audio and video of all my clips. When I drop them into a sequence, both audio streams and the video are not linked. I select them all and go to modify 'link' and make a stereo pair, but they are still not linked!
How can I change the default setting for this please? I can only guess I have hit the wrong option at some point.
Olly

Stereo pairs have a pair of triangles pointing downwards on A1 and upwards on A2 displayed on the audio tracks.
Linked tracks have an underlined clip name in the timeline.
The linked and stereo pair adjustments are in the Capture Settings. Set them they way you want before you capture.

Button Not Linked but Properties Menu says it is Help Please!

On one of my menu previous buttons I have linked it to the menu it needs to go to. I have verified this several times in the properties menu. Yet everytime I go to check the project in build it tells me it is not linked. In fact it does not work and I can't figure out why. I have tried to clear it recreate and position the button and relink it but no luck. I am only having this problem with this one button. I am stupmed any help would be greatly appreciated.
Thank You
Lauri

Yes I did look for another button. Anyway I looked in the flow chart and saw it was not linked so I link it and now it seems to work, This is my very first project in Encore so it is a big learning process. I am going to burn this to disc now and see how everything goes. Quick question for you if you don't mind. Do I need to render the project everytime before I create a dvd or will the settings stay as long as I don't alter the project?
Thanks again for your help I very much appreciate it!
Lauri

Why is the download "Not applicable" for my online purchase of Adobe Captivate 8 Student and Teacher Edition for Mac?

I purchased “Adobe Captivate 8 Student and Teacher Edition” for Mac on 7/31/14 and it is now 12/17/14 (only 5 months later) but it is showing as “Not applicable” when I go to download (maybe re-download) the program. I understood that I would be able to use the application on 2 computers, one at home and one at work. I think I’ve downloaded the program at home one time but have yet to install and activate it. I now have a new computer at work that can support that program and want to install the program on my office computer, but cannot download it again. Please advise.

It seems like that you have purchased a subscription for Captivate 8. In subscription you do not require any serial number. Subscriptions are activated on the basis of your Adobe Id. When user will install Captivate he has to sign in with the same Adobe Id under which they bought subscription. It will get activated after successful sign in during the installation.
As far as the installer is concern there is no difference in the trial version installer or purchased version installer. The installer is same for trial and purchased copy. All user needs to do is sign in during the installation if it is a subscription or use his serial number if it is a perpetual license or volume license.
You may download the trial version from the link mentioned above and then use your Adobe Id to activate the subscription.
Please let me know in case you need any further information.
Regards,
Rajeev.

Premiere Pro CS6 and Audition CS6 not playing any media

I'm having a problem with both Premiere pro and Audition CS6 not playing back any media when I hit play. The play button shows that it should be playing back but the playhead doesn't move at all. I'm on a late 2011 Macbook Pro running Mountain Lion 10.8.2 with 16gb RAM and an SSD. I've already completely uninstalled and reinstalled both application multiple times to try to get this working. Any help would be greatly appreciated.

1st, More information needed for someone to help... please click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
2nd, What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
3rd, Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Captivate 5.5 Buttons and Jump To Slide Not Working

I have a home slide where users can choose from 10 state-specific training options. There are 178 slides in the total presentation. When I open the presentation fresh a couple of the buttons work and jump to the correct state. One button jumps to a different slide than what is defined and the rest of the buttons do not work at all. If I select one of the buttons that works then return to the beginning of the presentation all the buttons work fine. The problem occurs when I open a fresh copy of the published presentation from my hard drive. The buttons are all active and there is no click box on the slide - you need to click on one of the state buttons to continue past the initial slide. I cannot understand why this is not working or why everything works fine when I return to the home slide from somewhere else in the presentation. Any help would be appreciated. Thank you.

Hi there
Buttons may seem a bit hit and miss and may be daunting with all the Active VS Inactive timeline bits and all. But I've really never known them to totally fail or be all that random.
Things to consider with Buttons.
What does the button do?
As I explained in my earlier reply, if a button is programmed to jump to a slide a lot farther down the track, and that portion of the track hasn't yet arrived from the server, this could well be an issue.
Another thing that can affect whether a button operates as you wish is if you are trying to jump to a slide that is beyond a Question slide (or a slide being treated as a Quiz slide) and your Quiz settings are configured so that each question must be answered before you may proceed. Captivate will disallow visiting a slide beyond the first unanswered question.
Sometimes a Button is configured to open a URL or a file. And it works fine during preview within Captivate, but fails after you publish. This is most often an issue with Flash Security Settings blocking the action and is described at the link below:
Click here to view
Hopefully this sheds some light on the situation.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

"Compliance and Audit Database domain account is not valid" error

I am attempting to install MBAM 2.5 and on the configure reports page I am getting an error stating "Compliance and Audit Database domain account is not valid" when trying to specify the account. I am using the same account as the read only
access domain user specified on the Configure Databases page.
The account is not locked out and I reset the password but no dice. Any idea what is going on here? This is my second attempt at an install (removed all previous install pieces including the databases).

I had the exact same problem. I had to add the account to the local administrators group in order to proceed. The installation then informs you that the account is an administrator at the end.
I removed it from the admins group. Doesn't seem to have caused any problems. Everything is working OK.

Captivate 5.5 and Audition 5.5 not linking

Similar Messages

Maybe you are looking for