Captivate 5.5 and LMS

Hello,
Ever since I begun creating projects from Captivate 5.5 and uploaded it in our LMS, I have observed this below image which briefly displays just before my project begins to play.
I hope someone could explain to me what does it actually do.
Projects were published as SCORM1.2 compliant and so far my projects are okay. Just needed some explainations on its existence.
BR
-Miguel

This image displays while your Captivate module is connecting to the LMS. You can configure the text that displays in this animation at that time via the field at Preferences > Quiz > Reporting > Enable Reporting > LMS Initialization Text.
It doesn't appear when you're not using a SCORM-compliant LMS. If the course module is having difficulty connecting to your LMS, this animation will be there for quite a while. Normally it will disappear within a second or two at most.

Similar Messages

Captivate and LMS JavaScript Problem

We use Captivate and a Plateau LMS. We had an issue with
bookmarking within our course. The first lesson worked just fine,
but later lessons were not bookmarking. We added javascript alerts
to the code to see when the Captivate content was setting LMS
variables.
We feared the issue was the bandwidth between the client and
the LMS was so limited that the script attempting to set the LMS
variables was failing, but this is not the case. The script appears
to not run at all sometimes at random intervals. When it does run
it is successful each time. The first lesson, which works reliably,
is much smaller than the other lessons, maybe the size of the SWF
factors into the ability for the script to run properly?
Has anyone else run across this issue? Does anyone have
advice in deeper troubleshooting an issue like this?
Any input is appreciated.
Thanks!
Chris

I think that CP3 sends back its data on a time basis, not a
slide
basis...like every 7 seconds or something?
We've had customers who are tracking interaction data in
their CP
quizzes which have like 40 questions. If they go through it
too quickly,
the timed 'save' to the LMS gets behind quickly...so by the
time the
user is done, only 2/3rds of the suspend data has been
saved...
And I imagine the bookmark could be left out entirely as
well.
So see if it's a timing thing? Go through slowly, see if
posting happens
on a timed basis...maybe that will help determine where the
issue is...
I do wonder how CP4 sends its data back...
Erik
chrishillman wrote:
> The script appears to not run at all sometimes at random
> intervals. When it does run it is successful each time.
The first lesson,
> which works reliably, is much smaller than the other
lessons, maybe the size of
> the SWF factors into the ability for the script to run
properly?
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Captivate and LMS Force 10

Does anyone know if Captivate works with the LMS system Force
10?
Thanks,
Jeff

I think that CP3 sends back its data on a time basis, not a
slide
basis...like every 7 seconds or something?
We've had customers who are tracking interaction data in
their CP
quizzes which have like 40 questions. If they go through it
too quickly,
the timed 'save' to the LMS gets behind quickly...so by the
time the
user is done, only 2/3rds of the suspend data has been
saved...
And I imagine the bookmark could be left out entirely as
well.
So see if it's a timing thing? Go through slowly, see if
posting happens
on a timed basis...maybe that will help determine where the
issue is...
I do wonder how CP4 sends its data back...
Erik
chrishillman wrote:
> The script appears to not run at all sometimes at random
> intervals. When it does run it is successful each time.
The first lesson,
> which works reliably, is much smaller than the other
lessons, maybe the size of
> the SWF factors into the ability for the script to run
properly?
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Send Captivate user variables and values to the LMS ?

Hi all. has anyone got a clever way to send a bunch of Captivate user variables and their values to an LMS (Moodle) so that they end up recorded as part of the SCORM course results or do these need to be explicitly part of a Quiz ? I think that I can setup where I get these values from the Learner so that they take the form of a Quiz (even though there is not a right answser) and set the the LMS settings to record interactions and scores. But is there an easier way to send them via LMSSetValue or even using a widget ?
Fergal

You can do it, but it will definitely not be the easiest way to achieve the objective. The accessibility of your web form will determine what you can and can not do.
The first issue would be populating the field of the form, and that can be achieved by actually re-generating the form programmatically and assigning a value to the html value tag for that field.
The second issue of "click on the button" is not trivial. If you're in the windows environment you will have to get into intercepting windows messages from the message queues and get the handle of the web browser window and after finding all the relevant information that will change every time this process is performed, is in my opinion not worth the effort.
I would approach this di
fferently in looking at what you are trying to achieve in the first place and that is to do directly with the data what the form would've done.
Forms will either send some e-mail to someone using the submitted data or submit information to a database or write it to a file. If you have a cgi script behind the form you can pass the information directly to the script rather, i.e call the scrip directly in the same way the form would've using your program and skip the form.
If you can be specific about your objectives and give me details about the forms and detail on the web server type and the capabilities of handling various types of cgi scripts I can give you detailed advice and pointers towards achieving the solution.
Questions you need to answer:
What would the form do with the data? (mail, file, database etc.)
How many fields do you need to submit?
What type of web server are you running? (IIS, Apache etc.)
Were is the form hosted, on the www
or on an intranet?
Is it accessible to you to change/add scrips to it?
Hope this helps.
Best regards
Jattie van der Linde
Engineering Manager, Software & Automation
TEL Magnetic Solutions Ltd

Captivate 4 publishing for LMS

Hello,
First, sorry for my bad english : I'm french.
Please someone can help me : I do not can launch my captivate project on my LMS : the message written is : The archive is not standard to SCORM 2004 (3rd or 4th ed)
I've already check the folder that content several files but I don't no exactly what kind of files are needed.
I work with captivate 4 and my LMS are MOS and syfadis.
Of course I followed the user guide and I put a cross in "Zip files" and "export html"
I dont no why but I can't attached the pictures with all the files in the zip folder. If necessary, I'll try later.
I think my folder is exported as a courses and not as a resouces. Can I change that with a parameter?
Thanks in advance

Nico,
I'm not familiar with your particular LMS but some of these systems that I've worked with allow you to add individual lesson SCORMs as resources similar to adding a PPT deck or a PDF document reference.
For example in another LMS called Moodle, you can create a course in the LMS and then add resources by selecting the resource type from a drop-down. If you choose SCORM as the resource type, it will ask you to upload the SCORM file. This will be just a single Captivate lesson packaged as a SCORM. The LMS will create a link on the course main page that allows the participant to launch the SCORM content and play it in a browser.
You can also create a SCORM course in Moodle. But this only allows you to upload a Multi-SCO SCORM, in which case all the resource files (e.g. Docs, PDFs, PPTs) must be packaged inside the SCORM zip file.
Check to see if your LMS works in a similar way. See if under the Resources that you are allowed to add it offers the option to add a SCORM object. If it does. Just add individual Captivate SCORMs.
Just thought I'd mention this in case it was useful and allowed you to structure the course in your particular LMS more the way you wanted.

Captivate 4 Save and Continue?

I am a 6th grade teacher and I am trying to use Captivate 4 with Angel LMS 7.3. Right now the only SCORM that seems to be working is 1.2.
What I want to do is 2 things.
1) have a lesson that has a few "paying attention" questions in it. After they complete it I would like for them to be able to review it at a latter date with the right answers selected.
2) Be able to save a quiz in the middle and complete it at a later time without losing their answers
Thanks

If you have the Adobe eLearning suite then Flash have some "stock" E-learning components that you can use for quizzes etc. They have SCORM support for LMS.
However, you would still need to implement the feature to store the results in some sort of a database in order to allow the students to review their results (and save their progress) at a later time.
I can't really guide you to somewhere were you can read about this because I am not aware of any place that deals with this specifically. You would need to get hold of a Flash programmer with ActionScript and database skills in order to pull it off.
Sorry I couldn't be of more help.
/Michael
Click here to visit the www.captivate4.com blog

Project Start and End Features - Can Captivate Phone Home and Expire ?

Hi,
I am looking at selling a course which the client will host for a limited time
We want the course to expire and we would like to receive anonymous user data back with their permission.
Send data back to use : Phoning home
I was looking at the Project->start and end-> Project end options-> execute javascript
With our clients permission could we use this to open a URL and phone home or would we crash into a firewall and burst into flames ?
Why ?
============
We want to monitor anonymous data such as time on course , score and number of users to improve the course for all customers.
My other thought was to use this widget
http://captivatedev.com/shop/adobe-captivate-6-x-google-lms-widget-with-email-reporting/
Maybe I can run this at the same time as my customers normal LMS
Expire
I was looking at the Project->start and end-> Project expiry date.
Is this relatively secure and stable ?
Our other alternative was to throw a widget in which said this course has expired
Or could I have the course check a website to confirm the course is licensed ?
Any ideas or advice would be appreciated
rgds Renovator
Message was edited by: renovator99

Hi Rod,
Thank-you for your reply from Western Australia ( which I just realized is the closest point to Madagascar and King Julian)
I like the graphs on A3C but
http://blogs.adobe.com/captivate/2012/06/course-companion-for-adobe-captivate-6.html
- I couldn't work out how to get the A3C viewer to it display more than the first 20 pages.
- it had a 3 month limit on the course based on an Adobe comment on the blog
http://blogs.adobe.com/captivate/2012/06/course-companion-for-adobe-captivate-6.html
- I wasn't sure whether the reporting works with advanced actions because some of the reports run on item name
- Nobody seems to be commenting on it on the forums :-)
- There was a distraction % on the table which I couldn't work out what it was
- it was unclear what port had to be open for the A3C communication
rgds Paul

Question on the Adobe Captivate 6.x Google LMS Widget With Email Reporting

Im looking to use the Adobe Captivate 6.x Google LMS Widget With Email Reporting to collect quiz answers and results but due to security issues I would like to put the results directly into a databse and not into google.
Does anyone have any experience in doing this and if so how what do I have to change to get the widget to send the results to the database.
Thanks

Email reporting has been removed in Captivate 6 out-of-the-box, though it can be achieved using a widget.
You can use Michael’s widget to achieve the same - http://www.cpguru.com/email-reporting-widget-for-adobe-captivate/
Akshay

Playing captivate movies in Peoplesoft LMS trouble

I created a Captivate 4 movie and it was posted to a PeopleSoft LMS. I registered and was able to 'launch" the movie. However, I can only view the movie with Scroll Bars. The students must see the movie in a "single screen view", without scroll bars.
I tried 3 different recording sizes, but I still can't get the movie to play without scroll bars. I am very frustrated! and need help.
I published in SCORM. Could that be the problem? I don't have access to a PeopleSoft technical resource, even though I have tried to find one.
Any suggestions would be greatly appreciated.

Hello,
You have to take into account a lot of parameters to choose the right resolution:
at which resolution the screens are set
how many pixels are left in the window opened in the LMS when showing a CP-movie
if you use a playbar, be aware that the needed pixels are added to your movie-resolution, about 20 pixels in the height for a horizontal playbar
if you use the TOC, separate mode, 250 pixels are added to the width
Mostly I choose a resolution of about 790 x 540, I'm using a separate TOC, no playbar. Our LMS is based on Blackboard.
If you only load the SWF (not starting from the HTML) one can rescale the window it opens in, but you loose some functionality for the CP-SWF.
Lilybiri

Why is the download "Not applicable" for my online purchase of Adobe Captivate 8 Student and Teacher Edition for Mac?

I purchased “Adobe Captivate 8 Student and Teacher Edition” for Mac on 7/31/14 and it is now 12/17/14 (only 5 months later) but it is showing as “Not applicable” when I go to download (maybe re-download) the program. I understood that I would be able to use the application on 2 computers, one at home and one at work. I think I’ve downloaded the program at home one time but have yet to install and activate it. I now have a new computer at work that can support that program and want to install the program on my office computer, but cannot download it again. Please advise.

It seems like that you have purchased a subscription for Captivate 8. In subscription you do not require any serial number. Subscriptions are activated on the basis of your Adobe Id. When user will install Captivate he has to sign in with the same Adobe Id under which they bought subscription. It will get activated after successful sign in during the installation.
As far as the installer is concern there is no difference in the trial version installer or purchased version installer. The installer is same for trial and purchased copy. All user needs to do is sign in during the installation if it is a subscription or use his serial number if it is a perpetual license or volume license.
You may download the trial version from the link mentioned above and then use your Adobe Id to activate the subscription.
Please let me know in case you need any further information.
Regards,
Rajeev.

Adobe Captivate Help | Drag-and-drop interaction (for subscription and Adobe Software Assurance customers only)

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/drag-and-drop-interaction.html

Yep. But it will only likely get to you in the next version released for NON subscription or ASA customers. With 6.1 Adobe was giving a preview of the functionality they would be including in your next release. Either way, whether you upgraded to the subscription edition or waited for the next paid upgrade, you were always going to be paying something to get this new functionality. 6.1 users just got it earlier than everyone else. That was Adobe's decision. It certainly hasn't been a popular one.

WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
Jelena

Hello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl           restoreDBTableMig.pl restoreJRMMig.pl      restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
     USER ID is ..................................... : sysadmin
     OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
     Generation to be restored is ................... : 0
     Backup taken from............................... : /opt/BKP/
     Common Services version in the backup data is... : 3.3.1
     Common Services is installed in................. : /opt/CSCOpx
     The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
     Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
     Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
     WARNING: The list of applications installed on this CiscoWorks server does not match the list of
              applications in the backup archive. If you restore data from this backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
     Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
     Available disk space in NMSROOT................. : 86451488 Kb
     Required disk space in NMSROOT.................. : 35906524 Kb
     (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
          Cross Platform Update started.
          Cross Platform Update completed.
          License check started.
             WARNING: The license details in the server are different from the backup data.
                      After restoring, please check the license available in the server.
             WARNING: Your current license count is lower than your earlier license count.
                      If you restore the data now, devices that exceed the current licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
Restoring DCNM CrossLaunch data.
          Restored DCNM CrossLaunch function.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
          Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
        10% of IPM Restore Completed
        30% of IPM Restore Completed
        50% of IPM Restore Completed
        60% of IPM Restore Completed
        70% of IPM Restore Completed
        100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena

Can VMS 2.1 and LMS 2.1 be installed in same server?

Dear all,
May I know can VMS 2.1 and LMS 2.1 be installed in same server? If so, how about the sequence of installation? If LMS 2.1 is already installed on the server, do I need to install the VMS Common Services? Thanks
Gary

Hi,
In VMS 2.1 bundle, RME and Security Monitoring Center are included. As I know, RME can receive syslog from switch/router/PIX and Security Monitoring Center can receive syslog from PIX. If I install these two applications on the same server, will there be problems about the syslog receive? Will the syslog messages mix-up? Thanks
Gary

Adobe Captivate 5.5 and Neo Speech: issue to use Paul voice

Hello,
I have installed succesfully Adobe Captivate 5.5 and then Neo speech Add-on. But unfortunately, when using Speech management function, I can't find Paul and Kate voice. These voices are not proposed in the voice list while the installation has suceeded.
A Kate and Paul directories have been install under Adobe Captivate 5.5 but I don't know why these voices seems to be not installed.
My PC uses Windows XP, default language = french. Adobe Captivate has been installed in English.
Thanks for your support,
Odile

Hi,
First I have installed Adobe Captivate 5.5.
Then I have installed Neo spech.
I have restarted my PC, then launch Captivate: Paul and Kate voices are not present in Speech Manager. And I have no special error message, only voices missing.
After that I have installed Loquendo speechs.
Launch again Captivate and see that Loquendo voices are pesent in Speech Manager.
Now I will show you Neo Speech install report, installation done after an Captivate application stop:
The installation has succeeded in the good directory.
When installing Loquendo the report is not really the same, it seems that some additional execution are done:
Following other discussions on the forum, I have looked at my Windows Control Panel Voice and see that 3 voices are proposed. I assume that these are Windows voice. I didn't find Stefan, Simon, Kate or Paul voices and I'm not ablle to add or configure something.
If someone has an idea of the issue

Captivate 1.0 and Vista?

I still have "Macromedia" Captivate 1.0, and i'm using
Windows Vista Basic. Everything works fine except for "full motion
recording". When i do this, the whole screen freaks out, and it
records it that way. My employer doesn't want to upgrade if it's
not necessary.
Thanks!
John

Sorry John, only Captivate 3 is advertised as being Vista
capable. To be honest, I'm surprised the only issue you are seeing
is with Full Motion Recording. I use Vista sometimes and find Vista
itself to be a bit unstable and flakey with different apps.
If you choose to continue with Vista, you really should
encourage your boss to upgrade Captivate.
Cheers... Rick

Captivate 5.5 and LMS

Similar Messages

Maybe you are looking for