Captivate 5.5 - Getting an accurate quiz result when user skips a question and returns to complete it?

I have a Captivate 5.5 project with the following settings;
Questions are optional and interspersed in the content
Backward movement is allowed
Quiz results show a percentage correct and are for the learners information only
Issue:
When the user skips a question, views their results at the end of the project and then goes back to complete the skipped question, the quiz results do not add the skipped question to the previous total. Captivate appears to think that only the skipped question was completed. Any idea on how to fix this would be great. Thanks

I have been answering a similar question several times yesterday, here are two examples:
Continue button - result page.
Help with conditional action in C8
Varun's proposal is the same as I suggested, but first I'd want to know if you also allow Review? The stack order of the embedded buttons on the Score slide is:
bottom 'Continue'
above this one 'Review'
above 'Review' there is Retake
Often users hare confused by Review and Retake, and as you probably know, once the Review button has been clicked, the Retake option is over, user cannot take another attempt. This means that in most courses I will drag the Review button under the Retake button. Only when Quiz attempts are exhausted, the Review button will become available. But you cannot put the Continue button in the same location because it will never become visible. Have a workaround for that, you'll find it in the other threads. I'm missing one that I cannot find.
Lilybiri

Similar Messages

Help! When users save web forms and come back to submit they get an error message and form is lost

I have a feb form that has a 28 save limit. When users save the form and return to submitt them they get a error message that says the form has expired or has been submitted. The form is open and it was not submitted. Any thoughts.
Form deadline is tomorrow and people are getting angry when I tell them to recreate the form.

Hi;
Can you forward me any of the emails from your users with their saved link that is not working and we can look into it?
Send to [email protected]
Thanks,
Josh

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Reporting Quiz results when quiz resides on website.

I've gone through all the previous questions, and have spent countless days with the Adobe Live Help staff but cannot get an answer.
Please....is there any way to report- to any LMS, anywhere, alongside the quiz or on a local server, or any other configuration - quiz results, when the quiz is on a website alongside the elearning course.
Using Captivate 8, I've tried communicating test results to Adobe Captivate Quiz Analyzer but, according to the Adobe Live Help it is designed to only work on a local drive not across the internet.
Did ANYONE experience success with quiz reporting when the quiz is on a website???
ANY suggestions, recommendation, etc would be most appreciated.
Thanks.

The email option for communication is likely a thing from yesteryear, when web-mail was largely unknown, as each PC had its own dedicated email "client" (such as Lotus, Outlook, et ux) to which javascript could be passed to perform the mailto: function. Most users today (or the least, a near majority) use web-mail, and there is no mailto: functionality - thus, no use for Captivate's email option on the Success or Failure droplists. I'll leave it to others to correct my misunderstandings ...

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

When I go to update and it gets to the backup part it gives me error -43 and says to complete it it will take all the stuff off my iPod how do I get it to update with out loosing everything on my 64 gb iPod touch

When I go to update and it gets to the backup part it gives me error -43 and says to complete it it will take all the stuff off my iPod how do I get it to update with out loosing everything on my 64 gb iPod touch

You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update etc.

Hi to all,
I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update server because you are not connected to the internet. I did check my wire-less connections and the connection from my PC to wire-less is hundred percent okay. I did search using google.com to confirm and my connections is good. Is there any problem regardings my firewalls or any help will be appreciated. Thanks

Hi bosefire,
Thanks for visiting Apple Support Communities.
You can use the steps in this article to troubleshoot your iTunes connection:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
Jeremy

I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions?

I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions? Which wireless headphones work best with the apple TV?

Ok so I've been doing more testing. It's all videos on the iTunes store. Anytime I try to download a podcast or stream it or anything it's super slow. To download an episode of Diggnation it tells me over 2 hours to download but the time keeps climbing and I just stop the transfer.
Some people said it's an Open DNS thing? Maybe it is but it's not computer specific and I couldn't find a way to change the DNS settings in my Airport, only on each computer. I tried deleting PLists and restoring my Apple TV and restoring my Airport and nothing is working.
I don't know if it an issue with me, my ISP or Apple. Anyone else experiencing this problem?

Send quiz results for users without Internet access

We have a group of developers in India who do not have internet access. I have created an eLearning course in C4 with a quiz at the end. For most users, they take the course through our LMS and we can report results without a problem. However, we have a group of developers in India who do not have internet access. Is there a way to capture name and quiz results and send them via email? Alternatively, we can open up a port to access Connect, but I still need to report name and quiz results.
Thank you,
FG

Hello,
Are those users connected in a network? If yes, with the version of Captivate 5 (will be available shortly) it will be possible to have the results send and stored on a server.
Lilybiri

I get different result when I paste with mouse and shift+ins

Sometimes I get different result when I paste the clipboard content with mouse and shift+insert key combination. Why? What can I do to stop this annoyance?

Just to add a little to the above, there really is no universally applied standard (not even close) for how the primary, secondary, and clipboard buffers should be used. Any X program can use them however they wish. But there are some common patterns: selected text should be placed in the primary buffer, and X pastes from the primary buffer with either middle click or shift-ins by default.
This default can (and unfortunately often is) overriden by clipboard managers - I don't know why they don't stay true to their name and just manage the clipboard buffer, but they often don't.
<mini rant>with no clipboard tools installed, selected text in any program I have is in the primary selection, and shift+ins or middle click paste from this primary selection. Ctrl-C/Ctrl-V post to/from the clipboard buffer. No need for extra tools. If I install any clipboard manager, this default sanity of X11 goes strait to s(&*Y. I don't like clipboard managers </mini rant> <mini praise> X11 is great without any of that cruft added </mini praise>
Last edited by Trilby (2013-06-15 03:12:39)

I'm getting an error (BEA-090508) when trying to apply SSL and starting the server

I'm trying to apply SSL with my own CA on a Weblogic Server. I'm getting an error (BEA-090508) when trying to start the server.
regards

Hi peggy gray,
I believe you have the Photography subscription purchased wherein the applications other than PS and LR are available as trial only.
Please check the link below:
Creative Cloud Photography plan | Adobe Creative Cloud
Regards,
Sheena

Display LOV result when user click touch icon

Hi
I have a requirement to display the result of LOV when the user click torch button. The current functionality is user click torch button then he click "Go" with empty or partial value and the result get displayed. I want to get all the result get displayed at the time of torch button bascially at the time of "processRequest"
Thanks

Hi,
You can use below code in your PR method:
import oracle.apps.fnd.framework.OAViewObject;
public void processRequest(OAPageContext pageContext,OAWebBean webBean) {
      super.processRequest(pageContext,webBean);
      OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
      OAViewObject vo = (OAViewObject)am.findViewObject("LovVO1");
      vo.setWhereClauseParams(null);
      vo.executeQuery();
}--Sushant

HT3131 how do i get audio from my HDTV when using a hdmi cable and mini displayport??

How do I get audio to display from my HDTV when I'm using a hmdi cable and a mini-displayport adapter on a macbook late 2008??

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

HT201413 i am getting a -1 security code when i try to restore and update

i am getting a messege pop up saying itunes has detected a phone in recoery mode you must restore and update. restore will run through whole process then i will get another pop up saying itunes cannot restore ok more information -1 sec code
Message was edited by: conniefrommerryville

Hi there patsea,
You may find the troubleshooting steps in the article below helpful.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different Dock Connector or Lightning Connector to USB cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. An incorrectly set default packet size can cause this error. Contact the software manufacturer that installed the packet-size modification for assistance. Or, follow this article by Microsoft to reset the packet size back to the default for Windows:How to reset Internet Protocol (TCP/IP).
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
-Griff W.

Captivate 5.5 - Getting an accurate quiz result when user skips a question and returns to complete it?

Similar Messages

Maybe you are looking for