Captivate 5.5 keeps importing same audio file to additional screens instead of newly chosen file

I split an MP3 file between three screens at the beginning of the training and all went well.  Now I am trying to add another file to another set of two screens further in the training - once I choose "Distribute the audio file over several slides" it reimports the first MP3 file from the beginning of the training (when I first chose that option to distribute).  I've tried over and over again to import the new file to these new slides, it simply will not import the new file, it keeps adding the first file that I split up.  Has anyone seen this before?
Much thanks in advance!
Biggi

Hi MagicBBB,
A patch to address this issue is available. Check for updates from the application through Help >> Updates.
Also have a look at the release notes here. http://kb2.adobe.com/cps/881/cpsid_88142.html
Please try out the patch and let me know.
Thanks,
Ashwin Bharghav B
Adobe Captivate Team

Similar Messages

  • Using The Same Audio Files On Multiple Platforms

    When I import new audio into logic - often it will say that is creating wave forms for the display.
    Q: I notice that the audio files on disk do not show an altered modified date - so where are these wave form displays being saved - on the audio file or inside the logic song?
    Q: I am interested in possibly going back and forth between logic and Pro tools LE - and at different times using the same audio files for both platforms. Assuming I am not doing any destructive editing - is it OK to use the same set of files for both platforms - or do I need to make duplicates (I'd rather not)? Also, how does this wave form display get dealt with by going back and forth between the two platforms?

    A: the waveform overlays are stored in separate,
    temporary files - *.ovm files or something, but my
    memory is fuzzy on that for now. The original audio
    files are not modified in any way.
    Hmmm... I've wondererd about this, too, and as best I can tell, Logic DOES modify the original files.
    I just imported some stereo interleaved AIF files into a project (with "copy external audio files to project folder" disabled), and I couldn't see any evidence of waveform creation--a disk search by date revealed nothing looking like waveform overviews, and there were no modifications to the AIF file dates.
    So... the next time I imported some AIF files, I checked the file sizes before the import...
    Sure enough, the files got bigger by about 100K after being imported into a Logic session, even though the file's timestamps were not changed.
    Looks like maybe Logic does write the waveforms into the files themselves ?
    On a related note, the manual suggests that it's possible to change the "copy external audio files to project folder" setting after creating a project, but I haven't found this anywhere other than File->New... anyone know ?
    Thanks!
    James
    [email protected]
    Dual 1.25 G4   Mac OS X (10.4.8)  

  • I can't Import video&Audio file in photoshop cs6

    I can't Import video&Audio file in photoshop cs6
    And mytimeline is like Cs5

    NO!~ is CS6 i'm very sure

  • How can I import MP3 audio files into premiere pro cs5?

    Can any one help?
    How can I import MP3 audio files into premiere pro cs5?

    It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
    fifa 14 coins
    cheap fifa coins

  • Can I import .cda audio file in iTunes on my Macbook Pro with OS X Yosemite

    Can I import .cda audio file in iTunes on my Macbook Pro with OS X Yosemite

    iNads,
    .CDA files are simple index files, less than 1 kB in size, that do not contain any audio.  There is no reason to import them.
    If you have the physical CD and wish to rip it into iTunes, you can import it per this guide:  iTunes 12 for Mac: Import songs from CDs

  • I imported an audio file from windows to itunes on my pc, how do i get that onto my iphone?

    I imported an audio file from windows to itunes on my pc, how do i get that onto my iphone?

    Welcome to the Apple community.
    Assuming it's in the correct format, select your phone from the device list in iTunes on your computer, select the music tab and check the music you wish to sync.

  • Imported same .tpz file twice.

    Hi,
    I have imported same .tpz files twice. SO now there are two entries in my SWC.
    and they have same namespaces... so that is giving a problem and conflict..
    Can any one help me out of this situation.
    I want to delete the other imported copy.
    Thanks
    regards
    fariha

    Hi,
    if you want to delete and you cannot do it from change list (reject change)
    you need to delate all objects inside each namespace
    and then you can delete the software component
    https://weblogs.sdn.sap.com/pub/wlg/1673?page=last&x-showcontent=off [original link is broken]
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • I'm trying to import an audio file into waveburner. The file is 868.7 mb. Is that too big?

    I'm trying to import an audio file into waveburner. The file is 868.7 mb. Is that too big?

    No, Barry. I regularly import 1Gb and larger into WB with no problems...

  • I am trying to import quicktime audio files into FCPX and it's saying they're not suppored - Help?

    I am trying to import quicktime audio files into FCPX and it's saying they're not suppored … Help?

    Here is the How to import in itunes 11. Including the Join tracks option.
    http://support.apple.com/kb/PH12278
    Also if you have imported them then  this article gives a good understanding of how to tag these songs
    http://samsoft.org.uk/iTunes/audiobooks.asp
    the other option would be to use an App like Audiobook Builder to stitch the tracks together in upto 12 hour long sections and sends to itunes automatically. It is available in the App Store. There are others available, Audiobook binder is free

  • Import an audio file in diadem

    Hi there,
    I have to open/import an audio file (WAV or MP3) in DIAdem (Ver 10.2.0f3031) to make some analysis. For this I installed the Audio dataplugin (Ver. 1.0.0.247). Butr if I open the WAv-file in the Navigator I get an error message, saying that the opeing failed. The WAV file seems not to be corrupted, cause it can be played on a media player.
    What am I doing wrong?
    Is there another way to transform an audio file into a TDM-file?

    Hi Adrià,
    Thanks for the data set, I now know what was going wrong.  It was actually quite easy to debug the problems in my DIAdem 2010 Alpha version, which sports a new feature to play back any channel in the Data Portal as audio.
    There were 2 issues.  The first is that you have to add a time base to the data channel before you export it, the second is that you have to rescale the amplitude of the signal to the bit range (+/- 2^31) of a WAV file.  Here's a quick VBScript that does that, which I did test in DIAdem 10.2:
    Channel = 1WavFilePath = ChnPropValGet(Channel, "sourcedatafilepath") & ChnPropValGet(Channel, "sourceparentname") & ".wav"Call ChnWfPropSet(Channel, "Time", "s", 0, 1/41000) Amplitude = MaxV(Abs(CMin(Channel)), CMax(Channel))Call ChnLinScale(Channel, Channel, 2^31/Amplitude, 0)Call ChnCharacter(Channel)IF FilEx(WavFilePath) THEN Call FileDelete(WavFilePath)Call DataFileSave(WavFilePath, "Audio") 
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Fixing duplicate database entries for the same audio file

    My iTunes Media folder is stored on a network accessible storage server. Since upgrading to 11.1.x, my computer seems to be duplicating database entries for the same audio files - for some albums, I have 4 entries for every song, each one pointing to the exact same file. The only difference between entries is rating info and play counts, which are specific to a particular entry (I think). Has anyone else seen this behavior? Is there an obvious way to stop this from happening? I can delete and rebuild the database from media files, but that starts getting old if I have to do it every week or so. Is there a script to delete duplicate database entries? (I found a VB script on the iTunes for Windows community, but the offending machine is a Mac).
    Thank you for any assistance!
    K

      Select the photo stack under the People tab and click the rename icon (bottom left)

  • While I'm addressing an email to several of my contacts, is it possible to keep the contacts folder up on the screen instead of calling it up for each individual person I wish to send the email to?

    While I'm addressing an email to several of my contacts, is it possible to keep the contacts folder up on the screen instead of calling it up for each individual person I wish to send the email to?

    Thanks for your help. On my own, I also discovered that in "mail" I could go to the menu bar and "window" and down to "address panel" which brought on screen and from there able to drag and drop addresses. As stated, I am a Mac "Newbie" and appreciate your help.

  • Captivate 6.0 - issue with using audio files as voicover

    We are using Adobe Captivate 6.0. We are using imported audio files as the voicover for the slides. While plyaing the final published exe, it runs normal. However, if I use the slidebar at the bottom of the slide for moving back and forth, the audio goes away while the slide continues to play. Can anyone please advise as to why this could be happening and how to resolve the issue? Appreciate any urgent help on this.

    Hello there,
    Have you inserted the audio on the slides or on the objects?
    Can you increase the slide quality to 24-bit (slide properties), then republish the project and see whether that helps?
    Thanks.

  • Importing .wpl audio files for slide show in Elements 4.0

    Once again I have to prevail on my fellow Photoshop users' expertise. Help! I am trying to import music files from a playlist in Media Player (Microsoft Home XP) into a slide show in Photoshop 4.0. I get error message "Cannot open file because it is the wrong type of file." (The files turns out to have .wpl extension. Have tried to move the files from Media Player first to "My Documents," then open them in Organizer or Editor, but get the same error message. (Have moved similar files successfully into SONY Vegas video editor all along.) Is there any way to convert the audio files to the format suitable for Photoshop (.wav or .wma)?

    I think that sunny_afternoons.mp3 is one of the MP3s that comes with Photoshop Elements. In order to see that audio file within the PSE Organizer, you may need to change the View menu settings for media so you see the Audio files. (You can temporarily set it to display only Audio files to make them easier to locate. However, it is important that you then set it back to your normal options to display Photos etc - otherwise next time you use PSE you will wonder - What Happened to my photos?)
    Once you find that mp3 file, right click on it in the Organizer and see if the Organizer can play it. If the Organizer can't play it then generally the slide show can not either. However, playing in the Organizer does help analyze problems but it is not a guarantee that the slide show will be OK. You might also check what is the default player software on your system for mp3's.
    Other than that - I don't think I have any additional ideas. Since you are attempting to run in an environment for which Adobe offered no support and no statement that it would work, you might just have to try to debug your system on your own.

  • Can't import any audio file types into my project files in AECS5

    I'm trying to add sound effects to a titles animation for the first time. When I tried to import a .wav file i got this error:
    after effects error. Can't import file (filename.wav)  unsupported filetype or extension
    So I converted the file to .mp3. Still didn't work. I converted the file to .aiff, wma and none worked.
    Whats the problem? Better to just animate in AE and input sound effects in Premiere?
    please help!
    Z

    balizumba wrote:
    I'm running Adobe CS5 on an ASUS i-5. 4gb ram. 500gb internal memory. 1gb
    dedicated geForce Nvidia 310M graphics card.
    However, you did NOT answer Todd's very crucial question:
    Are you running AE 10 without having done the free update to AE 10.0.1, which corrects a wealth of AE weirdness?  Hmmmmmm? 
    That's the first thing to tend to if you haven't done it yet.
    You have other issues going on as well.
    Issue #1 is that you only have 4GB RAM, and for AE 10, that's absolutely NOTHING.  You need to get more memory, you need to get it right away, and you have to turn off multiprocessing and leave it off until you get more memory.  Think about bringing your machine up to 12 GB minimum to use multiprocessing.  You should tend to that next.
    Issue #2 -- you have your media files on the same drive as your OS and applications.  This is very bad indeed.  You need to get an additional hard drive for your project files and media files.  A 1 TB internal hard drive costs what.... about $100 US?  That's the third thing to do.
    Once you do all that, you ought to stand a fighting chance at getting your audio work done in AE.  And you should use either AIFF or WAV files.  Do NOT use any kind of compressed audio.  AE has NEVER worked well with compressed audio.
    Can't afford to do all that hardware upgrading?  Got a video editing application?  Import your AE animation -- VIDEO ONLY, no audio -- and any audio files you need, including sound effects.  Do the work in the video editor.  Not only will it be faster, but easier.

Maybe you are looking for