Captivate 5.5 skin editor won't open

I'm working in Captivate 5.5, and the Skin Editor won't open, either from the Project menu or with Shift+F11. Any idea what's causing that? Is there another way to get at the Skin Editor, such as through the Publish dialog box? I couldn't find another way.
-Stuart

Hi Stuart
At any point have you had a second monitor attached? If so, it's quite possible that the dialog is indeed opening, but was last opened on the second monitor. In that case you need to either make your resolution large enough so that you see the dialog sitting in the odd location or re-connect the second monitor so you may then view the dialog and drag it back to the visible area of the screen.
Cheers... Rick

Similar Messages

  • PSE 11 Editor Won't Open Due to my "tampering"

    Photo Elements 11 Editor won’t open. (I also have PSE 6 and Editor now won’t open in it). I have Windows XP. Editor was working fine until I was trying to get my Viveza 2 plug-in into PSE 11 (I had it in PSE6 and all was fine).  I looked all over internet and could not find answer. Went into PSE 11 Editor screen and from one of the tabs I saw a place for plug-ins—you could browse for folder/file of plug-in (or so I thought). I went to Viveza folder inside my NIK folder and clicked it. After that --- Editor no longer loads in PSE 11 or 6. I have tried resetting Preferences—no help. I don’t even know what tab I used in Editor since I cannot open it. Any thoughts? I thought about uninstalling and reinstalling but think nothing will change since PSE6 was affected too. Need to change whatever I did to the file.
    Any thoughts?? Thanks!

    Try these solutions to see if any of these work.
    If none of them works, let me know.
    Solution1:
    Close Elements. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file. Click Yes. Elements will open with default preferences.
    Solution2:
    In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution3:
    In case that does not work too, you may try this.
    Try launching with anti-virus off or removing PSE from conflicting list.
    Regards,
    ~V

  • Ringtone editor won't open

    When I click on the ringtone "bell" symbol, I'm sent to a page that tells me either to click on the bell (which I've already done), or to the Store menu and click on "create ringtone" -- but "create ringtone" is grayed out.
    What do I do??? This never happened before. I'm using OS X 10.5.2 with an original iPhone updated with 2.0 software.

    MaggieMaeMT wrote:
    I'm using Photoshop Elements 5.0 and my Organizer is working fine, but all of a sudden my Editor won't open.  It was working fine about 2 weeks ago.
    Do you get any error messages?  Also, can you launch it manually by going to the program folder with Windows Explorer and double clicking on "PhotoshopElementsEditor.exe" file?  On a windows system the file is located at:
    <C:\Program Files (x86)\Adobe\Photoshop elements>
    Also for version 5.0 the file may be called something else..  You just need to use some guess work.  You can only launch .exe files  so just have a go and post back.
    Hope this helps.

  • G6 Experience Definition Editor won't open

    Hi,
    Following an upgrade from 5.0.4 Windows/Java to G6 on Solaris/Tomcat, the Experience Definition Editor won't start. It spews a bunch of errors, but I think this one is the root cause:
    3-20-2006       14:53:56.928    Warning OpenKernel.OpenHttp.Core        portal.servername.plumtree       PTSelectorThread_33500699       com.plumtree.
    openkernel.impl.openhttp.core.PTRequest OnClose() - Socket was closed before we got back complete headers. Data read from the network - [2300] bytes. Number
    of retries - [4]. Registerring error for URL [http://localhost:8080/imageserver/plumtree/common/public/css/community-themes.txt]. <ptLogMsgEnd>
    3-20-2006       14:53:56.929    Warning OpenKernel.OpenHttp.Core        portal.servername.plumtree       PTSelectorThread_33500699       com.plumtree.
    openkernel.impl.openhttp.core.PTRequest OnError() - Cancelling request to [http://localhost:8080/imageserver/plumtree/common/public/css/community-themes.txt]
    because of exception.
    com.plumtree.openfoundation.util.XPException: No data received from the remote server!
            at com.plumtree.openkernel.impl.openhttp.core.PTRequest.OnClose(PTRequest.java:962)
            at com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector.processReadableEvent(PTSocketSelector.java:370)
            at com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector.processSelectedChannels(PTSocketSelector.java:304)
            at com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector.run(PTSocketSelector.java:403)
            at java.lang.Thread.run(Thread.java:534 <ptLogMsgEnd>
    3-20-2006       14:53:56.933    Error   Portal_Admin    portal.servername.plumtree       TP-Processor8   com.plumtree.portalpages.admin.editors.subpor
    tal.SubPortalModel      SubPortalModel::DoTaskOnStartEditor Unable to get the stylesheet options. The following exception occured: java.lang.NullPointerExcep
    tion <ptLogMsgEnd>
    I see that it's using http://localhost:8080/imageserver/plumtree/common/public/css/community-themes.txt to get the community themes, which is fine, because that's our image server connection URL. I've gone to that box and done a telnet localhost 8080 / GET /imageserver/plumtree/common/public/css/community-themes.txt and it brings back the file, so I can't figure out why the portal's HTTP engine can't find it.
    Any ideas?
    Thanks,
    Chris Bucchere | bdg | [email protected] | www.bdg-online.com

    MaggieMaeMT wrote:
    I'm using Photoshop Elements 5.0 and my Organizer is working fine, but all of a sudden my Editor won't open.  It was working fine about 2 weeks ago.
    Do you get any error messages?  Also, can you launch it manually by going to the program folder with Windows Explorer and double clicking on "PhotoshopElementsEditor.exe" file?  On a windows system the file is located at:
    <C:\Program Files (x86)\Adobe\Photoshop elements>
    Also for version 5.0 the file may be called something else..  You just need to use some guess work.  You can only launch .exe files  so just have a go and post back.
    Hope this helps.

  • Photoshop Elements 9 Editor Won't Open

    I have PSE 9, and the editor won't open (organizer will, but not editor). When I click "Edit" from the welcome screen, the welcome screen just disappears and nothing happens. I tried accessing the editor directly from the program files folder, and again, nothing happens . I tried right-clicking on photos and telling them to open in PSE. Nothing happens. No error messages or anything-- it just won't open.
    It worked fine on my old computer in Windows 7, but I recently got a new computer with Windows 8. I tried running in compatibility mode for Windows 7, but that doesn't solve the problem. I also tried uninstalling and re-installing.
    Please help me-- this is driving me nuts! Thanks.

    Yes, but the odds are that you chose the logical file instead of the correct one. The actual editor is hidden away inside the support files folder for PSE 13 and the file at the top level of the Applications>PSE 13 folder is just an alias to the Welcome Screen. You really want this one:

  • Editor won't open on newly installed PE8

    I just got PE 8 for Christmas and installed it on my computer today. I am running XP, and my computer meets or exceeds all the requirements for the program to work. When I open the software, the Organizer works fine, but the Editor won't open. Every time I click on it it "thinks" for a minute, and then the Windows error window pops up telling me to send an error report. I've restarted my computer numerous times to no avail. I haven't uninstalled it and tried it again yet because I got a message saying I needed to deactivate the serial number to uninstall, and that made me nervous so I didn't do it. Any help at all would be greatly appreciated, I was so excited to get to use the software and am now completely frustrated that it won't work. Thank you!
    Message was edited by: LAS1598 for a typo

    Try the following. I put it in an older post in this forum Jan 4 I believe.
    Called PSE tech support and had it working in 5 minutes.
      goto  C:/Program Files(X86)/Adobe/Photoshop Elements 8.0/Locales/en_us/Plug-ins/import-export    and file
       Twain_32    has to be renamed to   ~Twain_32      .
    next  goto   C:/Windows/twain_32          in this directory I had to remove a folder called Dell which was associated with an A940 printer that doesn't work on windows 7.   The only file left was    wiatwain.ds    .
      with the 2 above change PSE came right up in editor mode.
      My system is a Quad core from Dell  630i,  8 GB ram and running Windows 7.
    maybe same problem in XP, don't know.
    jerry

  • After 2 mos, Adobe Elements 12 Editor won't open

    Worked fine before, now Editor won't open at all either from the Organizer or from anywhere else, such as Lightroom. Suggestions please

    Interesting.  I just closely examined the error dialogs I was getting when PSE 12 failed to launch.  There were numerous problems with case sensitivity errors for various frameworks inside the application.  For instance, one of the errors complained that it could not find the "AdobeLinguistic" framework.  The reason evidently is that the name was actually spelled without capitals.  It was "adobelinguistic".  I manually correct quite a number of these types of errors by renaming the offending area in the Framworks section of the application bundle.  This continued with each launch.  I'd get a new error.   I'd correct it and try again.  Another error.  Another correction.  Finally, it got past all the issues and launched PSE 12.  However, at that point, there was some internal error in PSE 12 (no surprise) that prevented it from running yet didn't show any kind of dialog where I could attempt to perform any further corrections.  I suspect this may have something to do with the fact that I have my disk partition setup as a case sensitive partition.  If someone else has a disk that is not case sensitive, I suspect they wouldn't see this error.
    I've reported this as a bug on the Photoshop Family Customer Community in the hopes that someone from Adobe will see it and take corrective action.
    I realize that some of you may find this post over your head a bit technically and for that I apologize.  But since I had already posted here earlier, I wanted to get this out so people would understand that there does appear to be a real issue with PSE 12.  We'll see what Adobe has to say.
    Tom

  • Help please!Photoshop Elements 8 editor won't open any files (windows 7)

    I have Photoshop elements 8 for my windows 7 laptop. I updated my laptop and now Photoshop won't open any files. I click on the psd/jpeg/png that i want to open(file,open) and nothing appears in the editor. even if i try by double clicking it the editor will show up but no file.i have tried restarting the laptop but it still wont work. I can't uninstall photoshop because it came pre-installed on my laptop and no disc or installer came with it. If anyone can please help me i'd be very gratefull.

    Quit the editor, then restart it while holding down Ctrl+alt+shift. Keep those keys down till you see a window asking if you want to delete the settings file. You do.

  • Photoshop Elements 11 Photo Editor won't open, trial info keeps popping up

    Okay, I own Photoshop Elements 11 but the Photo Editor refuses to open. When I click it, a pop up shows up for the trial version of PSE 11 saying I should buy it. I already have the lisence for PSE11 so i don't know what the problem is. (Also Organizer works but won't upload images and I tried the CRT+shift+Alt things but the delete preferences popup doesn't show.)
    I might have deleted a plug-in or something by accident, not sure if that would effect it but I did a systems restore.

    I don't want to re-install because my account says I can't.
    What exactly is the message you're getting?

  • Elements 13 Editor Won't Open

    I recently upgraded from Elements 11 to 13.
    The new Organizer works fine, and the catalogue converted fine.
    But when I try to use the Editor, it won't open. It asks me to sign in with an Adobe ID and to register the product. (It is registered).
    After a wait, it says my internet is not working (which it is) or that my clock is set wrong (which it is correct).
    Very frustrating, as I can't work with my pictures. I had no problem with Editor from Elements 11.
    What is the issue?|

    I haven't used Norton in years.  Maybe one of the links here can help:
    Google

  • Elements 7 editor won't open

    I have elements 7 and the editor won't load. It gets as far as the twain menu items loading and aborts. I tried holding Ctrl   shift  alt as suggested in another post but no luck. I am using windows 8. I had this problem before and an adobe assistant helped me out but I guess I don't qualify for that type of assistance this time around.

    Try deleting the Editor's preferences, step 1 of this FAQ:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes
    If that doesn't help, try the other steps.

  • PSE 12 Editor won't open

    Purchased PSE 12 recently and workrd fine for a few weeks. Then started getting 30-day trial countdown until 30 days later it doesn't work. Reinstalled several times from DVD but nothing happens when I click desktop icon. Copied files from DVD to PC and clicked "setup" and now I get the splash page and can open the organizer but not the editor. Am running Windows7.

    jofo
    It only took from October 2013 to until a few days ago to get my Photoshop Elements 12 Editor to open. GautamBahl (Adobe Staff) was answering a "Premiere Elements 12 Editor Will Not Open" problem the other day in the Premiere Elements Forum. I tried the posed fix on my "Photoshop Elements 12 Editor Will not Open" problem and was stunned that it solved my problem.
    Did you see my post on this here in the Photoshop Elements Forum where I posted the good news.
    http://forums.adobe.com/message/6266418#6266418
    All you are going to do is find and rename two folders said to be involved in the program activation
    SLStore Folder renamed to SLStoreOLD
    SLCache Folder renamed to SLCacheOld
    Local Disc C
    Program Data
    Adobe
    and in the Adobe Folder is the SLStore Folder that is renamed from SLStore to SLStoreOLD.
    Local Disc C
    Program Files (x86)
    Common Files
    Adobe
    and in the Adobe Folder is the SLCache Folder that is renamed from SLCache to SLCacheOLD.
    I tried countless fix for the Photoshop Elements 12 Editor that would not open, but the above was the one that worked for me.
    Please let me know if it worked for you also.
    Thank you.
    ATR

  • PSE 11 Editor won't open

    Just received a new PC w/ PSE 11 pre-installed.  OS is Windows 8.
    Was editing a photo in LR 4 and wanted to go into PSE 11 Editor to do more editing.  When I tried to open PSE editor, Adobe required product registration, which I did.  LR created a duplicate TIFF file and everything, and the window popped up asking if I wanted to Edit a Copy with Lightroom Adjustments, etc., and then PSE 11 Editor opened up fine the very first time.  (However it didn't seem like some of the tools were working properly, but that's another question for another time.)
    Subsequent attempts to open the PSE Editor either from Elements itself and LR4 have failed.  Editor will not open.  Why is this happening with a brand new product?

    Try these solutions to see if any of these work.
    If none of them works, let me know.
    Solution1:
    Close Elements. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file. Click Yes. Elements will open with default preferences.
    Solution2:
    In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution3:
    In case that does not work too, you may try this.
    Try launching with anti-virus off or removing PSE from conflicting list.
    Regards,
    ~V

  • Editor won't open from Adobe Photoshop Elements 12 Organizer

    After I enter my password for log in, the Editor will not open

    You have a reply from an adobe staff member in your other thread:
    Photoshop Elements 12 Editor will not open from Organizer

  • DNG Profile Editor won't open DNG from Panasonic LX3

    I need help.  I've just added a new camera (Panasonic DMC LX3) and I want to create custom camera profiles for use in Lightroom.  I have done this with all my cameras before with no problems.  The raw files open fine in Lightroom (2.6) and CS-4 Camera Raw (5.6.0.148).  First I exported to DNG from Lightroom then tried to open the file in DNG Profile Editor.  I received the following error message:
    "DNG Profile Editor could not open the selected image.  Note that the selected image must be a valid DNG colr image".  I tried the usual closing and re-launching the application, restarting the computer, etc. all to no avail.  I then downloaded the latest stand alone DNG converter (5.6) and performed a fresh conversion with that.  Still no luck.  The DNG's all open fine in Lightroom and CS-4.  Any suggestions?  These profiles have become an important part of my workflow.
    Mac Pro 2X 2.8 Quad Xenon, 10GB ram, 4TB HDD, OS-X 10.5.8
    and MacBook Pro 2.4GHz 4GB ram, OS-X 10.5.8
    Lightroom 2.6 (64 bit)
    CS-4
    DNG Profile Editor 1.0.0.39 Beta 2

    Yes, I used the stand alone converter as well as lightroom.  I did find a solution on another post.  I changed the dng compatibility in the drop down menu to "Camera Raw 4.6 and later" (it was set to " Camera Raw 5.4 and later") and it worked fine.  This worked with both the stand alone DNG converter and exporting as DNG from Lightroom.  It seems that the DNG profile editor hasn't been updated since the 2008 beta so It doesn't recognize the newer spec DNG.  Thank you for your assistance, I was starting to panic...

Maybe you are looking for

  • How do I turn off warning

    I have a machine with a Sun Blade 2500 mohterboard in it. When I boot the machine, I receive a warning: Warning: Failed to open device(/pci@1e,600000/isa@7/i2c@0,320/gpio@0,30:pca9556_0), rv(6) I believe the problem is caused because I have no sound

  • Streaming Video in Remote Panel

    Desired Functionality:  Our laboratory uses LabVIEW 2011 to make science instrumentation such as digital microscopes, spectrometers, etc., available to college students to do remote laboratory assignments.  We need to be able to choose a live video s

  • LabVIEW 2010 SP1 - When will it be available?

    Any expected date of release? Thank you Dany Dany Allard Solved! Go to Solution.

  • Mac Book Pro runs slow after Lion 7.2 upgrade

    Ever since I downloaded the Lion 10.7.2 my MBook Pro runs SLOW! Any thoughts or suggestions?

  • Can you make an audio transition in Motion 5? If so, how?

    I remember before I upgraded to FCPX the previous version of Final Cut had audio transitions (a cross fade 0Db and a cross fade +3Db). I have not needed an audio transition in Final Cut until now and I couldn't find one in FCPX. So I set out to build