Captivate 5: Acrobat Quiz Results Not being Forwarded - Screen Freezes.

After completing the quiz, then pressing the POST button, I fill in the required two fields; but, the screens freezes or remains on the ...signing in status indefinitely.
I tried all the security settings for my pc and the acrobat website with no success.
I tried various Captivate settings and still no solution.
Is there something else I could try, I need to temporaily use Captivates' Score Result feature until the LMS is online.
Thank You
iaustin

Hi,
Can you try repubklishing your course using Flash Playe 10 in settings of Publish options?
Can you add the location of your published output to Flash player, Global Security settings to Trusted Locations--
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
Thanks,
Anjaneai

Similar Messages

VOIP calls not being forwarded from GW to GK and visa versa

I have a VOIP network setup in place using 2691 routers. i have a siemens PBX connected to the 2691 routers using an E1 controller (running QSIG), my WAN interface between the two sides is an ATM interface. when i do a csim start from one router to the extension on the other side the call goes through and the phone rings. However, when i actually dial from one extension to the other, the call is not being forwarded. and what happens is that i hear the dial tone again on the phone im dialing from.
I have taken some debugs but still could pin point the problem, even though in the ccapi inout debug i found that when it tries to look for a node, it doesnt find it.
I have attached the configuration for both sides. Along with the debug from one of the sites.
There are a couple of GW's associated with the GK.
The ones im concerned about are Mussalla_GW & GK-HO.
Thank You in advance
Mouhannad

Try this:
dial-peer voice 2 pots
direct-inward-dial
Without this command the router will not collect the digits coming across the PRI.
Please rate helpful posts.

Calls not being forwarded to skype number

Hello, I have had my Skype number for 2 years now and never had a problem.However since end of November 2012 calls from the USA are no longer being forwarded to my cellphone in Germany.No , I have not changed my settings , why should I , since it has been working perfectly all these years.There is no way to get help from Skype and I am extremely frustrated with their service.It sucks to pay for a product that won´t work.I am a dissatisfied customer and will leave them if they do not straighten out their stuff.

watsource wrote:
Hello, I have been a SKYPE user for the past 5 years and everything has been working fine. Recently, calls from telephones to my skype number are not being forwarded to my designated number. I've tried to turn off and on forwarding feature but still not working. Calls from other skype contacts using skype calling me are forwarded but not from any landline or mobile contacts calling my skype number.
What happens when you call your Online Number?
If calls directly from other Skype users are being forwarded to your designated number, but not the calls made to your Online Number, call-forwarding appears to be working. You may have a different issue related to your Online Number. Has it expired? If you click on "Account" at the top of this page, you can verify that your Online Number is still in effect by clicking on "Online Number" once you log into your Skype account through that link.
If your Online Number is still in effect, here's something else to check. From a computer (not the Skype app on a mobile phone or other device), can you verify the Privacy setting for Online Numbers? It should be set to allow calls from anywhere. If not, it is possible that this setting was changed, preventing you from getting calls on the Online Number.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

[svn:osmf:] 14982: Fixing some event parameters not being forwarded.

Revision: 14982
Revision: 14982
Author:   [email protected]
Date:     2010-03-24 02:15:50 -0700 (Wed, 24 Mar 2010)
Log Message:
Fixing some event parameters not being forwarded.
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/DebuggerElementProxy.as

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Kate Li
TechNet Community Support

Quiz results not correct

A number of users who are doing some elearning material I have created are having problems with the quiz.
If they get any of the answers wrong they have to retake, however the answers are not clearing, and if they do get all the questions

Hi
I am using Captivate version 4
Quiz Settings:
Reporting is enabled
LMS = SCORM
Report status = pass / fail
Report to LMS = Score
Report date = quiz results only
Reporting level = Interactions and score
Settings
Show progress
Show score at end of quiz are set
Pass/Fail
100%
If fail
Infinite attempts
Show retake button

Adobe Captivate 5.5 - Quiz Results

I am using Adobe Captivate 5.5 and have the latest updates installed. I have an Internal Server configured for LMS and under the quiz reporting preferences I have "Percent" selected to report to the LMS, but when I launch the Quiz Results Analyzer and generate a report the "Percent" is not shown. If I select "Score" under the quiz reporting preferences the Quiz Results Analyzer will display the score.
How can I review the "Percent" using the Quiz Results Analyzer?
Thanks,
Tiffany

Hello,
Welcome to Adobe Forums.
Let me just check this at my end and I will get back to you.
Thanks,
Vikram

Quiz result not showing up in Edge

Hi there Edgers
Really hoping someone can help me out with this problem. I've used Redesigns code(Seen Below) to design a quiz in Animate.
I have two problems, when the first question is answered, it skips to the 3rd question instead of the 2nd. I am not sure why this is as I have have checked for overlapping buttons, there are none and it does not occur on any other questions, only the first. Second problem is the quiz reult is not showing up at the end, I have the "grade" and "result" divs in my timeline but when they are reached they do not change to display the quiz results.
Help would be much appeciated
i = 0;
sym.$("btn4","btn24","btn34","btn44","btn54","btn64","btn74").click(function(){
          i++;
          sym.play("s" + i);
          if (i==1){
                    q1 = 10;
                    //sym.$("question1").html(q1);
          if (i==2){
                    q2 = 10;
                    //sym.$("question2").html(q2);
          if (i==3){
                    q3 = 10;
                    //sym.$("question3").html(q3);
          if (i==4){
                    q4 = 15;
                    //sym.$("question4").html(q4);
          if (i==5){
                    q5 = 15;
                    //sym.$("question5").html(q5);
          if (i==6){
                    q6 = 20;
                    //sym.$("question6").html(q6);
          if (i==7){
                    q7 = 20;
                    //sym.$("question7").html(q7);
          var FinalScoreHolder = q1 + q2 + q3 + q4 + q5 +q6 +q7;
          if (i=7){
                    //var FinalScoreHolder = q1 + q2 + q3;
                    sym.$("grade").html("You scored "+FinalScoreHolder+"%");
                    if (FinalScoreHolder >= 90) {
                    // play the timeline from the given position (ms or label)
                    sym.play("pass");
                    } else {
                    // play the timeline from the given position (ms or label)
                    sym.play("fail");
As a side note, this quiz appears at the end of a 8 section mulitmedia learning environment. The code obove is the only code present in the "creationcomplete" window, the rest is done in the timeline.
George

In you if statement you need to change the if statement from i=7 to i==7; when you compare you need the double equal sign.
var FinalScoreHolder = q1 + q2 + q3 + q4 + q5 +q6 +q7;
          if (i==7){
                    //var FinalScoreHolder = q1 + q2 + q3;
                    sym.$("grade").html("You scored "+FinalScoreHolder+"%");
                    if (FinalScoreHolder >= 90) {
                    // play the timeline from the given position (ms or label)
                    sym.play("pass");
                    } else {
                    // play the timeline from the given position (ms or label)
                    sym.play("fail");

Quiz results not appearing in email body

Using Captivate 2, I set up a quiz that is supposed to send
its results to e-mail. In the Quiz Manager, on the Reporting tab, I
have the following settings:
Enable resporting for this project (checked)
LMS: email
Report Pass or Fail: report status as defined by report data
Choose report data: report quiz results and slide views
Report score to LMS as: score
Reporting Level: report interactions and the score
Then I publish my project. When I run the .htm, no e-mail is
generated. The only way I can get an email to generate at all, is
if I click on the Pass/Fail Options tab in the Quiz Manager, and
set "If passing grade:" action: send email to: (the email address).
This does generate an e-mail, but the body is blank, with no
results reported within (even though I specifiying that I want the
data in the above settings).

I'm trying to do the same thing... having set up a small
quiz, a pass mark, and asking for an email to show the score only,
nothing is generated running it locally. But after uploading to my
server and running it from there I do in fact get an email. The
data is in an attachment POSTDATA.ATT which Windows doesn't know
how to open. But if you change the extension to csv then XL opens
it fine and reports as requested. The user is identified by the
sender of the email.
HTH

Network Policy Server Event ID 6272 not being forwarded to Event Collector.

Hi there
I have configured an Event Subscription to collect events from 2 DCs that run RADIUS for network switches. It appears the events are being forwarded okay, I am getting the Security events (Logon and Logoff) on the event collector PC. However I am not getting
any of the Network Policy Server security events (specifically Event IDs 6272), to centrally audit RADIUS logins to switches.
The subscription is collector initiated, and I have added Network Service to the Event Log Readers Group. Is there something I am missing in the setup requirements for these events to be forwarded?
Thank you,
Kind regards
Hylton

Hi Gabriel101,
Could you offer us more information about your environment, such as what edition server you are using, whether your AD and NPS role on the same server, whether your NPS working
properly now, whether you can receive others security auditing.
The related KB:
NPS Local Log File Status
http://technet.microsoft.com/en-us/library/cc735386(v=ws.10).aspx
Event ID 6272 — NPS Authentication Status
http://technet.microsoft.com/en-us/library/cc735388(v=ws.10).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Captivate 5.5 Quiz results change after review

I've looked through the questions here and can't seem to find an answer/explanation for what I'm experiencing.
I've created a quiz (test) where the attempts per question are 1 failure levels set to "none" (this is acting as a final exam for a course so I want them to answer the question and move on).
When the quiz is completed I get the score and after clicking "review quiz" and going through the answers, the score changes. It always drops.
So if I complete the quiz the first time and get a score of 96%, click "review quiz" and go through each question, when I get back to the score page the score has changed to 92% or 90% and that's what's being reported back to my LMS (Inquisiq) when the quiz is closed. It seems to be reporting the correct item answers to the LMS but the overall score is being reported incorrectly.
Reporting settings are:
SCORM 2004
Send tracking data at end
Pass/Fail
Report as a percent
Quiz results only
Interactions and score
No backward movement allowed
No skip button
Only a submit button
Any thoughts would be very much appreciated.

Thanks Rod,
I don't have any custom widgets or playbars or swfs, it's all stock. Just changed the quiz settings.
I tried Liliybiri's suggestion to remove the playbar controls. (Thank Lilybiri!) I also allowed backward movement but required answers to all questions. This gave me the back and skip buttons I needed for the review. I deleted all non-question slides so that the review is only navigating to/from question slides and this seems to be working. I've tried it myself several times and have been unable to make it happen again. I've got a couple other users testing as well.
Rod, I was also thinking that maybe this particular project had become corrupted and I should try a new one from scratch. I may test that tomorrow anyway to see if it's my quiz settings or a corrupted project. I'll let you know how I make out.
Thanks to you both for your help with this today!

Voip: CLI is not being forwarded

Dears,
I connected cisco 3800 router with ericsson MD110 exchange using QSIG over E1 Pri. Calls are forwarding properly over ip network but few features are not being enabled specially CLI feature. I found a documnet where a command "caller-id enable" was issue in voice-port interface. But i go in this mode using command voice-port 1/0:15, no command caller-id find. My topology is below:
MD110 PBX ----3845---------3825----MD110 PBX
Waiting for immediate positive response.
Regards
Rameez

R1#
Oct 30 13:19:12.465: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x3684
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18381
Preferred, Channel 1
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0181, N/A
Plan:ISDN, Type:Unknown
Called Party Number i = 0x81, '3'
Plan:ISDN, Type:Unknown
Shift to Codeset 5
Codeset 5 IE 0x31 i = 0x80
Shift to Codeset 5
Codeset 5 IE 0x32 i = 0x81
R1#
Oct 30 13:19:12.469: ISDN Se1/0:15 Q931: TX -> SETUP_ACK pd = 8 callref = 0xB684
Channel ID i = 0xA98381
Exclusive, Channel 1
Oct 30 13:19:13.005: ISDN Se1/0:15 Q931: RX <- INFORMATION pd = 8 callref = 0x3684
Called Party Number i = 0x81, '0'
Plan:ISDN, Type:Unknown
R1#
Oct 30 13:19:13.481: ISDN Se1/0:15 Q931: RX <- INFORMATION pd = 8 callref = 0x3684
Called Party Number i = 0x81, '0'
Plan:ISDN, Type:Unknown
Oct 30 13:19:14.429: ISDN Se1/0:15 Q931: RX <- INFORMATION pd = 8 callref = 0x3684
Called Party Number i = 0x81, '1'
Plan:ISDN, Type:Unknown
R1#
Oct 30 13:19:14.577: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xB684
Oct 30 13:19:14.693: ISDN Se1/0:15 Q931: TX -> ALERTING pd = 8 callref = 0xB684
Facility i = 0x9FAA068001018201018B0100A1080201020201018000
Progress Ind i = 0x8188 - In-band info or appropriate now available
Oct 30 13:19:14.737: ISDN Se1/0:15 Q931: RX <- FACILITY pd = 8 callref = 0x3684
Facility i = 0x9FAA06800100820100A406020102810102
R1#
Oct 30 13:19:20.841: ISDN Se1/0:15 Q931: TX -> CONNECT pd = 8 callref = 0xB684
Progress Ind i = 0x8182 - Destination address is non-ISDN
Connected Number i = 0x0181, '3001'
Shift to Codeset 5
Codeset 5 IE 0x32 i = 0x81
Oct 30 13:19:20.901: ISDN Se1/0:15 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x3684
R1#
Oct 30 13:19:32.625: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0xB684
Cause i = 0x8190 - Normal call clearing
Oct 30 13:19:32.681: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x3684
Cause i = 0x8190 - Normal call clearing
Oct 30 13:19:32.681: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xB684
R1#u all
All possible debugging has been turned off
R1#
Output of Router R2 you will find in my next post as i have to split output due to character limit.
Regards

Continue button in Quiz Results not working.

On the Quiz Results page, if someone clicks the Continue button, it does nothing no matter pass or fail. I have these settings:
Slides 55 and 44 do exist. Any ideas?

Hi RodWard,
Okay, your question was helpful in that it helped me find some things out. First, continue works if passed, it just takes 5-7 seconds to get there. I fixed that.
Changing the Required to "Answer All" instead of "Pass Required" fixed the Continue on the fail. Thanks so much!

WINS traffic not being forwarded

Hi folks,
For some reason, it seems that my WINS traffic isn't being forwarded across subnets over our 3750's. This is causing the workstations to have a "hit and miss" with authentication. I have enable "ip helper-address", "ip forward-protocol udp 137/138", even tried "ip directed-broadcast".
If I create create an LMHOST file, it works everytime. "Enable NetBIOS over TCP/IP" is enable on WinXP Clients. On Win98 clients receives it's setting from dhcp.
PCa---Vlan1 --<>-- Vlan2 ---- WINS Server / Authentication
Thanks..
-- Dominique

Hi Everyone,
This is how I have the device currently configured:
<..snip..>
ip dhcp excluded-address 10.203.8.1 10.203.8.29
ip dhcp pool 10.203.8.0/24
network 10.203.8.0 255.255.255.0
default-router 10.203.8.1
dns-server 10.70.0.9 10.70.0.6
domain-name rainbowschools.ca
netbios-name-server 10.203.0.7
netbios-node-type h-node
<..snip..>
!! Example Interface Configuration !!
interface FastEthernet1/0/23
description Academic
switchport access vlan 108
switchport mode access
no cdp enable
spanning-tree portfast
!! Server VLAN interface !!
interface Vlan100
ip address 10.203.0.1 255.255.255.0
!! Academic VLAN interface !!
interface Vlan108
ip address 10.203.8.1 255.255.255.0
ip helper-address 10.203.0.7
ip directed-broadcast
!! IP Forward Protocol !!
ip forward-protocol udp netbios-ss
ip forward-protocol udp bootps
ip forward-protocol udp bootpc
--> Even when I enter "ip forward-protocol udp 137/138", it doesn't appear. So I am assuming it is on by default.
Thanks.
-- Dominique

Ipod not being read and freezing

When I plug my ipod into my computer, it goes to "do not disconnect" but not the flashing do not disconnect. Its frozen. My computer wont read it. So I unplug it and its frozen. I know how to restart it but that doesnt help me from when it freezes again once I hook it up. How do I stop it from freezing and not being read. Thanks

i am having a similar problem with my 4g 20G
it freezes when i try to update. i thought maybe it was the latest version of itunes i recently installed but i reverted back to an old updater version and itunes 6 and while i was able to get 300 songs on the ipod without freezing, when i tried to put the rest of my library on there it freezes. i've even tried to put as little as 15 songs on at a time and that still freezes the ipod.
i have a mac powerbook with macos 10.2

My tx is so slow, the web cam is not working, the screen freezes and got color distortions

- My tx is so slow, and heats up very fast... so i think that the advance is not working properly
- the web cam is not working, since the 3th time iused... when i try to use it with my msn... got freezed, then y try ending the process and doesnt work, y have to restart it but it stay just on logging off... and do nothing more... so i have to switch off directly from the power button
- The screen freezes... some thimes the screen got freezed... and got color distortions too... so i have to to switch off again directly from the power button
i was thinking that it was a software problem... but i restore my lap and it doesnt work cuz it still being with the same problems... so lately im thinking that its a hardware problem... i call to technical support from mexico... but they can do nothing for me cuz i bought my lap at circuitcity from el paso... and that store close a few months ago... so i need help before de warrantie expires...
This is the second time that my lap gives me problems, last time I made the change at the store but this time it will be impossible cuz is now closed...
that is why I seek your help...
i will be grateful if you answer in Spanish because my English is not very good...
thankyou so much...

If your warranty has not yet run out get it serviced, now! All of the comments seem to indicate that it is the motherboard>

Captivate 5: Acrobat Quiz Results Not being Forwarded - Screen Freezes.

Similar Messages

Maybe you are looking for