Captivate 5 - Audio Editing - Unable to Select a Portion of the Audio

I need to edit the audio on each slide - specifically cut out long pauses - but I'm unable to select a portion of the audio. I can right click and Select All but that's not what I need.
Any ideas what's wrong?

Double click the audio waveform in the slide to open the Slide Audio dialog.  You should be on the Edit tab.  Select a section of dead space in the waveform and hit Delete.

Similar Messages

  • A portion of the audio is missing on the end of clips?

    Using Adobe Premiere Elements 7 a portion of the audio is missing on the end of clips after I bring it in. The files are motion JPEG AVI .

    Welcome to the forum.
    I do not recall seeing any issue with muxed MJPEG files, regarding truncated Audio. First, take a look at this ARTICLE on MJPEG files.
    Next, all Audio files (muxed or elemental streams) must be Conformed, which converts them to 32 bit, floating point files for editing. If one does not allow the Conforming to complete 100%, the Audio can be truncated. See this ARTICLE.
    Good luck,
    Hunt

  • I want to name individual photos in the album but I am unable to select view sort in the drop down menu How can I overcome this?

    I want to name individual photos in the album but I am unable to select view>sort in the drop down menu How can I overcome this?

    Great to hear, but what was the solution?

  • I am unable to select a colour using the swatches

    I am unable to select a colour using the swatches, I have a greyish line under the colour I am trying to select and the colour I am trying to use will not highlight - this is a new problem, as it has been working fine - I have pushed something so how do I undo it? Please help, this is very frustrating

    Thank you, the step where I went to tools, options and then selected a product for the application worked. It was a problem with .pdf files. I don't understand how all of a sudden it changed from what had worked all along, but, I changed it back from xps viewer to adobe and all is working fine.
    I appreciate your help!

  • Starup disk was unable to select install cd as the startup disk

    I was in 10.3, crashed. Had to restore (saving my things). I updated up to 9.2.2. Put in my 10.2 cd to install and I get a message...
    "start up disk was unable to select install cd as the startup disk."
    As far as I know I did all the updates, but could be wrong.
    Anyone have an idea how I fix the problem?
    dn

    Tammie, please excuse my confusion, but you say you were in 10.3 (Panther) and it crashed. You say you updated to 9.2.2, then you say you put in 10.2 (Jaguar) cd to Install. At the bottom in your profile you show you are running 10.4 Tiger.
    So I am confused which Operating System do you want. Your machine will not run all 4 Operating Systems at once.
    To Install from a CD or DVD you Insert the Media and restart your computer holding down the C key for it to boot.
    Also bear in mind that If you are not using a Full retail version of the Operating System, or the Operating System that came with your computer it will not work, if it came from another computer. Operating Systems that come with specifc computers will not mix and match with other computers.
    Please tell us exactly what operating system you want to use.
    Cheers Don

  • Since upgrading to Firefox 4 I've been unable to select search items from the google drop down box in the toolbar. Instead, I have to retype my search item completely as I also unable to select 'auto-complete' items as they appear.

    Since upgrading to Firefox 4 I've been unable to select search items from the google drop down box in the toolbar. Instead, I have to retype my search item completely as I also unable to select 'auto-complete' items as they appear.

    Known problem with the Google Toolbar extension. <br />
    http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

  • I have quicktime  player 7.7.2. A relative video clips from his phone. Previously they downloaded with both video and audio. As of Sept. 30 only the audio downloads, yet Quicktime still plays older saved video/audio clips. Help?

    I have Quicktime Player 7.7.2. A relative has been sending video clips from his phone since June, and until Sept. 30 both the video and audio would download. SInce that date only the audio downloads, yet I can still open and play the older saved videos just fine. I tried looking at QuickTime help info available. One place said something about purchasing Quick Pro for use with 7.7.2, but if I need that, why can I still open older saved videos? Thanks for any help.

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • I have been editing my films and spent hours fixing the audio levels. Everytime I close and re-open final cut audio levels go back down.

    I have been busy editing my film and for the third time now, i have been correcting my audio levels with each clip  - this takes me hours - and everytime I go back to the project, the audio levels fall back down. So everything i did previously was a waste of time.
    Does anyone have the same issue? Is there anything I am doing wrong here?

    Gosh, that sounds aweful close to the same problem people are experiencing with the undo bug. They don't know their having a problme until they hit Command+Z to undo their last change, and they can't, the undo command is actually grayed out in the menu. I understand if this happens, X is not auto saving your changes either. So, the next time you make all of your changes, check to see if your undo command is grayed out from the menu. If it is, duplicate your project to force a manual save. Then Quit X and reopen it and insure you project is intact.

  • Unable to insert earphones jack in the audio port

    I am unable to insert the earphoen jack completely into the audio port.

    You may want to clean it since debris could be in there. Otherwise I blame the headphone jack, which may be too short or not of the correct size (3.5mm). So a "mobile" headset would not fit because the diameter is 2.5mm

  • When trying to convert quicktime mpg video files to m4v I am unable to open them or lose the audio completely. How can I fix this?

    So I am in nursing school and am making a group project that involves interviews of current RN's. I've been tasked with putting the video together from all the clips, even though I don't really have any experience with iMovie or iMovieHD (both of which I have on my MacBookPro). One of the interviews was recorded on what I think must have been some kind of Sony camera (I can find out if this is important), but I got the files off of a flash drive that my group member gave me. The files all opened in quicktime with no problem with complete audio and video, but when I tried to open it in either iMovie or iMovieHD it stated it could not "parse" the file (in HD) or just simply did not open (in regular iMovie). I'll have to learn the program either way but have been messing around with iMovieHD more so I would prefer to use this if I can. How can I convert the MPG files to m4v and still retain the audio part of the video? I've tried loading it into iPhoto and they won't load. Any suggestions would be greatly appreciated since I'm running out of time to put this video together! Thanks!!
    -Grace

    Hi Grace,
    The free app MPEG Streamclip may be able to convert the file to a more suitable format. It can be downloaded from the developer's site here:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Here's a User Tip by AppleMan1958 that provides some more information about MPEG Streamclip (it's about importing homemade DVDs, but similar principles apply):
    https://discussions.apple.com/docs/DOC-3951
    John

  • Want to leave out portions of the audio

    I have a project that is about an hour and a half long and contains footage I took while on vacation in Las Vegas. I stripped away the audio for the clips that I don't want and left in the audio that I want. I also added in an appropriate song for sections where there is no audio. For example, I used music from Pirates of the Caribbean in clips of Treasure Island. What do I do about the clips with no audio? Is it weird to just leave like it? The original audio is just background noise like people talking, traffic whizzing by, etc.

    I do think it's a bit strange. Decided to import clips from Garageband along with whatever songs I'm using.

  • Photoshop CC video: Where is the audio flyout menu? I want to set the audio level of a clip but when I click the little triangle the flyout only offers Motion options, no audio.

    I created a video clip by ripping from a (non-protected) DVD & brought it into Photoshop CC for editing. I want the audio to fade in & out but cannot find any audio controls!
    The info I've found online says to click the little triangle at the right end of the clip & I should get the audio flyout menu, but all I get is a menu with "Motion" options.
    Please help!! Where are the audio options I see on the tutorials?
    Thanks ...

    The audio was indeed in there; I could hear it! But I found the fix:
    Some Googling revealed that the timeline video sprites should appear *blue*, not purple as in my screenshot. I'm not sure how that happened, but I scrapped the project & restarted from scratch - and though I can't say what I did differently, this time the video sprite in the timeline was blue, and the audio flyout was there! So it's all good, thanks!

  • How do I add an audio crossfade to a cut without FCPx slipping the audio in-point?

    I'm a seasoned FCP editor, and I'm having some major issues doing what I consider to be very basic editing in FCPx.
    I basically have one video track shot on an DSLR along with a synced audio track from an external recorder. I'm using the blade the remove audio/video segments from the interview. This is working well, but what I want to do is apply an audio crossfade just to smoothen out the audio cuts. Normally, I can do this in FCP 7 just fine without affecting my existing cut positions.
    However, every time I do this in FCPx, it actually slips the in-point of the audio clip that is attached to the crossfade. Is there a way I can turn off this behavior?
    Even when I try to "Detach Audio", the in-point sliping still occurs when applying an audio crossfade, causing my video and audio track to move out of sync.
    Any tips would be great.
    It seems like Apple has taken a few steps forward while also taking a few steps back with this release.

    I think the default way transitions work is to ignore handles and instead use the visible media. I'm betting this is the way imovie does it, but I don't know.
    Try changing this behavior in the preferences by going to:
    Final Cut Pro --> Preferences --> Editing
    And then change the "Apply Transitions Using" setting from "Full Overlap" to "Available Media." I'm hoping this changes the default behavior back to how FCP 7 works.

  • The "Audio Visualization 2D and 3D canvas " part of the audio api slide show is only showing the background part of the 3d image

    There seams to be a problem with the Audio Data API slide show on the 10th page (Audio Visualization 2D and 3D <canvas> at http://videos.mozilla.org/serv/blizzard/audio-slideshow/#slide10). or maybe just on my computer. the problem is it only shows the background of the canvas. It still looks like its a moving image but it doesn't show the objects. So haw do i fix this?

    Works for me with the current nightly build.
    Do the other slides work?
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • HT3775 I just got a dash cam for my car, the format is H.264, all the files end in .AVI, when I try to open them I only get audio no video. I don't need the audio, just want the video. The message I get says I need a codec to see the video. What missing f

    I can't open my AVI files and see video, I only hear the audio with a black screen. My format for my dash cam is H.264. When I try and open my files the messeage I get is
    The document “DR153659.AVI” could not be opened. A required codec isn't available.

    It's most likely in VLC or Perian, but may not exist for Mac OS X.
    (86916)

Maybe you are looking for