Captivate 5 not pasting correct screenshots from Snagit

Sometimes Captivate will paste the previous pic instead of my most recent pic from Snagit 9.
EG: I want to paste a dog pic from Snagit to Captivate. I copy the dog pic from Snagit and paste it into CP5; however, I get the cat pic I pasted the time before into CP5 from Snagit. Thinking I didn't copy the dog pic correctly, I went back into Snagit and recopy the dog pic and again tried to paste it--CP5 pasted the cat pic.
I tested pasting the dog pic into MS Word and it works just fine. I copy the dog pic from MS Word and go back into CP5 and paste...AND AGAIN...the cat pic displays. I've cleared CP5 cache (which I thought might be the culprit) but that wasn't it. The only way I can fix the copy/paste problem is to close Captivate entirely (not just the doc but the entire program).
Has this happened to anyone else? What did you do to resolve the problem?
-Frustrated in St. Paul

There have at times been issues with trying to use the Clipboard to paste images into Captivate. You are better off saving your image from Snagit as a JPG or PNG file to a folder, and then using the Captivate INSERT > Image function to get the image into your project.

Similar Messages

When paste a web link to some web sites it's not pasted correctly.

When I try to paste a link (for example I've copied an image adress by pressing right mouse botton "copy image url") than i try to paste it in conversation or a new thread on forum but it's not pasted correctly. Only image name is pasted including .jpg but full adress isn't i mean instead
http://www.iphones.ru/wp-content/uploads/2012/09/ip5-plus22.jpg
only
ip5-plus22.jpg
is pasted.
It's so inconvenient. Can anybody advise how to stop this?
Thank you!

Pardon the intrusion.
Very very very glad to see you here again

Delete this as not got correct answer from long time

Delete this as not got correct answer from long time

When you upload files to MDS using the ant script it overrides the existing files with the same name.
If you want to remove resources from MDS using ant you can use the the removeSharedData target in the ant-sca-deploy,xml ant file.

Captivate Quiz Not Reporting Correctly in LMS

I am using Captivate 5.0 to publish a project to an EKP LMS. I am able to get the file to show complete in the LMS, but the quiz is not reporting correctly. Instead of a percentage it is reporting the number of points earned. Is there any way to have a percentage reported instead? I would appreciate any suggestions. Grace

Hi Grace,
Can you check the Highlighted part and reset your Radio button to 'Percentage'--
Thanks,
Anjaneai

Express document "Art. segments not generated correctly" received from aut

Art. segments not generated correctly
dear all
i created an article in MM41. while doing the listing in WSM3 this error is occurring same plant i was created artilces and listed also but today it is showing this error msg . Can u please suggest me how to solve this?. i showed to my tech team they told me to check in configuration settings?. is their any problem with config ?.
Note:- Article segments were not created in full
The data is stored in the log 00000000000000049016 file
1741001 No entry in key field in distribution chain segment for article 1741
Possible causes:
- Reference article was not maintained in full
- Inconsistent maintenance of article
Possible actions:
- Maintain reference data
- Call transaction WSPK to edit the faulty segments
thank you
RK

i clearly mentioned what was the error occured for me agian ur asking quetion means i can't tell m . i created an article in mm41 while doing the listing in wsm3 that time this error is occuring if u can solve i will be happy
thank u
rk

I can not paste URL's from Safari to my Yahoo mail and need to

Please note -
I DO NOT WANT TO USE THE APPLE MAIL PROGRAM TO SEND LINKS
I am looking for a practical solution to copying links from the Safari toolbar so that they are 'clickable links' for the recipient when sent from my Yahoo mail.
I have tried many of the suggested solutions that I have found in previous discussions and none of them seem to work with Yahoo.
Many thanks!!!

Welcome to Apple Support Communities. We're all users here.
Are you using the 'insert link' icon in the Yahoo! mail toolbar?
Open Yahoo! mail.
Compose a new message.
Click the Insert Link icon to open a window similar to the following:
Now you can manually type-in the desired link,
-or-
cut and paste it from the Safari toolbar, as follows:
Open the desired page you want to link to in another tab in Safari.
Highlight the link, by clicking and dragging until the entire URL is highlighted. I click on the icon at the beginning of the URL, and it is automatically highlighted. (That 'highlight' behavior is not consistent with other browsers, such as Google Chrome, by the way.)
Copy it by pressing the Command and the C keys at the same time to 'Copy' the desired link, or use the Safari toolbar word menu, Edit, and Copy.
Move to the tab with the open Yahoo mail window, click the 'chain-link' icon to open the Yahoo! dialog box as shown above
Now press Command and the V keys at the same time to 'Paste' the link into the open dialog box, or use the Safari toolbar menu, Edit, and Paste.
At this point, the URL should appear in blue underscore within the Yahoo! email message as a clickable link to the page.
In the first screenshot above with the arrow, you see the URL for this thread shown twice, once in black (simply cut and pasted), and the second in blue underscore (clickable), using the Insert Link icon as described.
UPDATE: After sending the test message I composed above with Yahoo! mail to a Gmail account, both the links actually were clickable, so it might depend upon how the email service receiving the message handles links.
Message was edited by: kostby

Hyperlinks not pasting correctly

Hi Ladies & Gents –
I just migrated an excel spreadsheet to numbers, and I'm having trouble posting Numbers-generated hyperlinks into my mail program.
The spreadsheet looks roughly as follows
Name Link Labeled Link
Lions http://blah.com/Lions blah.com
Tigers http://blah.com/Tigers blah.com
Bears http://blah.com/Bears blah.com
The blah.com's in column c are hyperlinks generated with the hyperlink function and looks as such:
=HYPERLINK(B1,"blah.com")
But when I copy and paste these into the mail application, which is what they are generated for, they get paste as just the link text (blah.com) and lose the actual hyperlink.
Any help would be greatly appreciated. Thanks!
– Emerson

It appears that you misunderstood what the function is designed to do.
The HYPERLINK function creates a clickable link that opens a webpage or new email message.
HYPERLINK
(url, link-text)
• url:
A standard universal resource locator. url is a string value that should contain a properly formatted universal resource locator string.
• link-text:
An optional value that specifies the text that appears as a clickable link in the cell. link-text is a string value. If omitted, url is used as the link-text.
If you omit the link-text parameter, the cell value will be the ORL itself so copying will behave as wanted
but if you gave the link-text parameter, the cell value will be this parameter and it's this one which you will get after a copy cell.
To achieve what you are trying to do in both cases, you must copy the "string shaped as an URL", not the Hyperlink.
Yvan KOENIG (from FRANCE jeudi 14 mai 2009 15:20:31)

Interactive Captivate simulations not working correctly in Presenter

Hi,
I'm looking for a fix for what appears to be a bug with
importing interactive Captivate 2.0.0 (build 1177, originally a
trial verson) files into Presenter 6.0.432 (in PowerPoint 2000 SP-3
9.0.8952 on a Windows XP computer).
The course works fine when I publish the Presenter file to My
Computer, but doesn't work correctly when I publish to Adobe
Connect (hosted version). What happens is that the interactive
Captivate simulations are already done. (It seems like Presenter is
somehow completing the simulations before the end user gets to
those slides.)
Each course I've created is approximately 40 slides in length
with approximately eight Captivate demonstrations and eight
Captivate simulations spread out through the course. (A few slides
of content with voiceover, then a slide with a Captivate
demonstration, then a slide with a Captivate simulation slide, etc.
etc.)
Captivate Project Preferences are set to:
Advanced project compression
508 compliance
Compress compiled SWF file
Publish Adobe Connect Enterprise metadata
Captivate Publish settings are:
(unchecked) Export HTML
Flash Player 7
I tried switching the Flash Version to Flash Player 8, but it
didn't help at all, and instead caused an additional problem which
was that the text entry part of the interactive simulations stopped
working altogether.
I'm inclined to think this is a problem with the Connect
server (since the course runs fine when published to My Computer,
just not when published to Adobe Connect), but suppose it could be
a Captivate or Presenter issue. In any case, I'm open to whatever
gets it fixed.
Thanks,
Ruth

Thanks Art,
I tried it, but it didn't help.
Given TechNote #46b77621 (recommending people link to
Captivate files rather than embed them in Presenter), and the
problems I'm having, I'm starting to wonder if this is a known
problem.
If it is, it's a big one, as a major selling point of
Presenter has been that you can embed Captivate files within the
slides. Linking out to them would be a different experience for the
end-user (and not as nice).
Another problem is that the TechNote says text entries won't
work in Captivate files embedded in Presenter (I have had some
inconsistent issues with this). Serious feature problem if it's
true. (As I'm sure you know, it's a very common aspect of computer
training courses, which is what many people are using
Presenter/Captivate for.)
Hopefully this all gets sorted out sooner rather than later.
(Or you never know, perhaps, hopefully, there's just something I'm
missing. :))
Thanks,
Ruth

Diacritics not pasting correctly

Dear all,
I have attached a 2 page sample of a recent PDF document in English with a few diacritics. When I copy some text from the PDF to MS Word 2003, the pasted letters are fine but the diacritics come out as gobbledegook. Any suggestions please??
Thank you,
Ju

My pdf document declares at the beginning that its font is'Set in 10 on 12.5 pt Photina'. Does that help - is that a Unicode font? When I paste into MS Word, the font shows as PhotinaMT. I have tried every font in MS Word but none will display the diacritics correctly.
Thanks

Captivate 4 not detecting audio input from USB Microphone

I'm using a Logitech USB microphone in Captivate 4. When I try to calibrate it, Captivate 4 is not detecting any sound. It is set up properly. In the "audio settings" menu, this microphone is listed in the drop down list. I have selected it as the input device. However, when I try to "calibrate" this microphone, no audio is detectable. Captivate 4 is detecting the device, but not the audio input. I have double checked all the usual suspects--this microphone is selected as the default recording device. It does not use special software or drivers. It is designed to use the drivers in Vista. It works fine with other applications. I have made sure the input level is detectable. I've checked to make sure it is not muted. I have other microphones (non-USB cheapies) that work fine, but I can't get this specific USB microphone to work.
Suggestions?

Hi there
Have you tried what is on the page linked below?
Click here to visit the page
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

F.05-Curr Translation - System not picking correct accounts from FBKP (KDF)

Hi FI Gurus,
We are having INR as Company Code Currency & USD as Group Currency.
We have given a diff set of accounts in FBKP-KDF for valuation and translation.
When we run F.05 for translation with Currency Type 30, the system is correctly converting all INR line items into USD but while posting the accounting document the valuation accounts are getting picked up instead of translation.
In debug, we found out that the system requires Clearing Document to go for Translation accounts & if it gets the clearing document in line item then it is picking up the correct accounts.
But then how the translation works for P&L accounts or balance accounts?
What is the exact functionality of Translation? How postings can be generated to correct accounts?
Regards
AK

Make the following entries in F.05 and execute.
General Selections:
1. Enter comany code
2.Valuation Key Date
3.Valuation Method
4. Valuation in Curr Type: 30
Under Posting:
1. If you are running it in a test mode, then do not check the boxes Bal. sheet preparation valuation and Create Postings.
2. Enter document date, posting date and period
3. Check the box: Reverse Postings
Under Open Items
1. Check Valuate G/L Account Open Items
2. Specify your G/L Account Numbers
3. Check the radio button: Valuate GR/IR
4. Check the box: Valuate Vendor Open items
5. Check the box: Valuate Customer Open Items
Under G/L Balances
1. Check the box: Valuate G/L Account Balances
2. Specify your G/L Account Numbers
Under Other
In our system, we created a variant and entered it in the blank field next to List Variant.
Under FASB 52
1. Exch. rate type for translation: Enter your exchange rate type here.
2. Check the box: Use for translation
3. Translation of currency type: 10
Execute your report.
Point of Note: None of this would work if you have not configured your foreign currency valuation properly. To get FCV working can be very frustrating and you would need to take your time. We have been working on ours for almost 7months now so patience and more research would help.

Captivate 3 not sending correct completion information

Hi all, we are using Captivate 3, and are in the process of uploading our content to Element K's LMS. We have tested some of the content, and its marking courses complete even though the completion criteria have not been met. We have run through the content and achieved a failing grade, but the status changes to complete.
Here is how we have set up our courses:
In the Reporting Options, we have set Complete/Incomplete under Report Pass or Fail (Element K tells us they need this setting), Quiz Results only under Choose Report Data, Percent under Report Score to LMS as. We have selected Never Send Resume Data under LMS Customization Settings. In Pass or Fail options, we have 80 % or more of points to pass, and If failing grade Allow user Infinite attempts. We are publishing as SCORM 1.2 (required by Element K).
Can anyone shed some light on this? Should a Captivate course send "completed" to the LMS on a failed assessment? Help! We are under very tight deadlines, so anything anyone can suggest would be appreciated!
Thanks,
Diane

I've not lookede through the previous thread, but you've done variations on the settings?
You have tried Pass/Fail instead of Complete/Incomplete? Generally, if you want a score to show, you need to use Pass/Fail. That's not always true, but a score is generally not associated with Complete/Incomplete in SCORM 1.2 (in my understanding).
Have you tried the lesson through any test suite outside the LMS itself? That'd be my next step. The ADL Test Suite is the 'offical' tool for such testing but isn't very user friendly. Otherwise I'd suggest Rustici's Test Track
http://www.scorm.com/scorm-solved/test-track/
or the Reload Editor (which I've not used and am not 100% sure is for SCORM validation)
http://www.reload.ac.uk
Run the lesson through some SCORM tester and see if the values passed are what you expect. If not, change the settings, publish, and test again. A lot more efficient, hopefully, than going through the LMS itself and allows you to possibly determine an LMS issue over a lesson issue.
HTH
Erik

SSRS 2008 not returning correct dataset from Stored Procedure

Hi,
I have a stored proc which returns different no. of columns as output based on the input parameter. The issue I am facing is that the SSRS 2008 is always populating the column list of the dataset with the first select list irrespective of the input
parameter.
How can I have the SSRS populate the column list based on the input parameter I am passing?
eg.
IF @type
=
'test'
BEGIN
SELECT 1 AS Col1,2 AS Col2
END
ELSE
IF @type
=
'test1'
BEGIN
SELECT 1 AS Col1,2 AS Col2,3 AS Col3
END
SSRS always populates the dataset with two columns viz col1 & col2 even when I pass
'test1' as input parameter.
Thanks for the help in advance.
Sherin

From my experiences, your dataset must return the same number of column and same name in both select statement.
IF
@type =
'test'
BEGIN
SELECT 1 AS Col1,2 AS Col2,
null AS Col3
END
ELSE
IF @type
=
'test1'
BEGIN
SELECT 1 AS Col1,2 AS Col2,3 AS Col3
END

PDF will not print correctly from any app

I seem to keep on getting the same error everywhere I print on SL (from safari/firefox/preview etc etc)
It will usually print any lines or logos but miss all text?? I did have the dreaded adobe reader installed but have since removed it?
I am in urgent need of printing out some manuals for a class so in real trouble, help!

Where do these PDFs that do not print correctly come from? Are they downloaded from the internet or from email? Or do you create them yourself on your computer? If so, in which program?
Do some PDF files print correctly, but not others? Did you remove the dreaded Acrobat Reader before this problem developed or after? Did this problem develop only after you ungraded to a certain release of Snow Leopard or has it never worked in SL?
PDF is wonderful technology, but every so often there can be issues.
Arch

My device is not running correctly as my simulator

Hi,
I just downloaded and installed new Xcode 3.2 in my Mac.
Everything is correct with my simulator except my device which is not running correctly.
From Organizer, my iPhone Software version is 3.1(7C144), when I run Simulator 3.1 is correct, but not with device 3.1, could someone help me ?
Thanks.
parislee

parislee wrote:
Hi,
I just downloaded and installed new Xcode 3.2 in my Mac.
Everything is correct with my simulator except my device which is not running correctly.
From Organizer, my iPhone Software version is 3.1(7C144), when I run Simulator 3.1 is correct, but not with device 3.1, could someone help me ?
The advisory info below* is different than the previously mentioned string:
ln -s /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0 (7A341) /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1
I'm not sure which issue you are addressing or which fix you are using or which you need now, sorry but the recent notice below may be of some use. Please study to decide where you're at now before proceeding, thanks.
-=-=-=-
http://adcdownload.apple.com/iphone/iphonesdk_3.1__final/iphone_os_3.1.1advisory.pdf
*iPhone OS 3.1.1 Advisory iPhone SDK 3.1 and iPhone OS 3.1.1 for iPod touch (3rd generation)
If you installed iPhone SDK 3.1 prior to September 21st, 2009, please perform the following to continue development with your iPod touch (3rd generation).
The following does not need to be performed if you are developing with any iPhone, iPhone 3G, iPhone 3GS, iPod touch 1st or 2nd generation.
1. Log into your Mac with an Admin account and launch the Terminal application (/Applications/Utilities)
2. Copy and paste the following line into Terminal ln -s /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.1 (7C145) /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.1 (7C146)

Captivate 5 not pasting correct screenshots from Snagit

Similar Messages

Maybe you are looking for