Captivate 5 not rendering large exe files properly

Have imported large swf files into Captivate % (with seperate .wav files for audio). They all synch on the timeline at 24fps. for each slide. They look great in preview and when published to .exe they look fine on some computers. But we have encountered on at least 1 computer that the audio is out of synch with the video, and the video lags behind.
Would have not thought that this would be a problem with Captivate 5 exes.... Does anyone know a solution?
For preferences, I used Flash Player 9.

Sounds like the issue is something to do with either the specs or the codecs of the machine having problems.
The larger the SWF file and the more video you have, the more some machines will struggle to keep up with the decompression cycles.
Is the problem box of a lower spec (CPU speed etc) than the machines playing the content OK?
What version of Flash player is on each of the machines? (FP 10 handles video better)
Are the codecs up to date on that machine?
Find out what the differences are and you'll have your solution.

Similar Messages

Flash play installation not work - The exe file deelete automaticly and the process is still running

Flash play installation not work - The exe file deelete automaticly and the process is still running

Why i get no answer?

Pre9 will not take large photo files, is 13 any better

pre9 will not take large photo files is 13 any better

old1
What computer operating system is your Premiere Elements 9.0/9.0.1 running on - with version 9.0/9.01, it is a 32 bit application whether it is run on 32 or 64 bit computer. So, you will get that "too large" error message when your still total pixel count exceeds the limit.
If you go to Premiere Elements 10, 11, 12, or 13 (the current version) and you are running one of those programs on a 64 bit computer, each will be a 64 bit application and program will not throw off the "too large" error message. I have challenged these latter applications with stills 10000 x 7500, and each was imported with issue.
But, the question becomes, because you can, should you? No matter how high the resolution of the image, it will be forced into the resolution characteristic of the import. Just how much you can get away with in this regard goes to your computer resource and how many of these stills oversized for the project settings.
If you put Premiere Elements 13 on a Window 7 or 8 32 bit system, I am fairly confident that you end up with "too large" error message. That would not be the case if Premiere Elements 13 on a Windows 7 or 8 64 bit system.
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
ATR

Can not open windows exe files.

I have enrolled at uni by correspondence and can not open any forums that have being created by adobe captivate ( mostly exe files ) with my mac. I do not run any windows with my computer the lecturer has emailed me that previous students have open these files by running them on a mac with a windows emulator.
Any help would be appreciated

Hi Kristen and welcome to Discussions,
Mac OSX can not run .exe files, since these are meant to be run in Windows (originally MS-DOS, but that's another story )
Apples BootCamp lets you run Windows on the 'Nativ' (real) hardware your Mac has, whereas any Virtualization app like Parallels, VMWare Fusion or VirtualBox runs Windows in a 'virtualized environment' (emulated) hardware.
While these Virtualization apps are great for running the typical Office programs, they are not best suited for any programs, that need direct hardware access like games for example.
Crossover Mac is an app which allows to run certain Windows programs without having to have/buy a Windows License/CD/DVD to install Windows.
BootCamp: http://www.apple.com/macosx/features/bootcamp.html
VMWare Fusion: http://www.vmware.com/products/fusion/
Parallels: http://www.parallels.com/en/desktop/
VirtualBoX: http://www.virtualbox.org/
Crossover Mac: http://www.codeweavers.com/products/cxmac/
For starters I would try VirtualBox (since it is free) and a Windows license you might own and see how it works.
Hope it helps
Stefan

Exit button not working in exe file made with Aggregator

Hi,
I created an .exe file using Aggregator in full screen mode but the exit button on the skin doesn't work. When I click the exit button, the dislay hiccups (wobbles a bit) but the file keeps playing and doesn't close. This is especially problematic since this occurs in full screen. The only way to exit is by hitting the Escape key on the keyboard. The exit button works fine in individual .exe files of the modules; it's just in the aggregated .exe file that the exit button doesn't work. Is there anything special I need to do to make the exit button work with Aggregator?

Hi, this is more J2EE related stuff, SAP came with a solution but is taking ages to get the next page after the "Exit" button is pushed:
Go to VisualAdnmin >server(n) >Services >Configuration Adapter >
(Right side Pane) webdynpro >sap.com >tcwddispwda >PropertySheet
default.
Edit the property sheet and change the custom value for the property
"sap.locking.maxWaitInterval" to 200.
Note 1113811, explains why these kind of errors happen.
I still waiting for a better solution from SAP.
Cheers

File copy does not work with exe files

I used BufferedReader and BufferedWriter to make copy of an exe file in local drive. Nothing was strange in this code. But I wonder the newly created exe file is denied "..exe is not a valid win32 application" by Windows. I could see the bytes are copied. Is that something like header of exe file is damaged etc ??

Readers and Writers are for text. For binary data use InputStream and OutputStream.

Not a win32.exe file

i can not run itunes because i get not a win.32.exe file, someone please help me i want to use my new ipod

Have you tried the following document?
iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

Captivate 4 link between 2 .exe files

I work with adobe captivate 4 and i developped a lot of presentations that i want to link i published each of them in the .exe format but the thing is that when i passes from one .exe file to another one, there is a delay and we can see the first .exe file closing and the second one opening. I wish to have a continious presentation.

Hi there
Sorry, but there isn't a way past that to my knowledge. The reason is because the exe has to close and the new one has to load up and open. You are wanting a behavior similar to what you have with SWF playing in the browser. In the browser setup, it appears pretty seamless because the next SWF simply loads into the browser client area and plays.
Perhaps consider submitting a Wish Form to Adobe and who knows, maybe they will come up with some clever workaround in a future release.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

PSE 10 will not edit large picture files after it accepts them. After editing it either changes jpeg to psd or greys out the file. What must I do?

PSE 10 allows large picture files into the organizer and editor but after editing, saving, and closing, the jpeg returns to the organizer either with a psd file extension or as a greyed out broken photo icon . Why does it cause users to waste time editing files that are too large. How do I solve the problem?

See:
Photoshop Elements Help | Maximum image size limits in Photoshop Elements

Firefox does not handle large bookmark "files" gracefully, it HANGS

Essentially large #'s ( massive ) cause Firefox to go off the deep end and never shut down in any reasonable time. I tried backups in JSON and HTML, files produced took ~2-3 days, 50mbyte and ~90mbytes each. Essentially when you exceed past some indeterminate bookmarks "size" Firefox never gracefully in some useful time frame shut down, folks here have said when firefox is attempted shutdown and if it does not, then go to task manager and shut the Firefox process. THat is less desireable. Question is when firefox closes, ( request to shutdown ) is it trying to do a whole host of task cleaning ./ bookmarks backup? I tried cutting back my books marks slightly, now FF can be closed without Taskmanager shutdown, but now none of my addons ( that I disabled and deleted some ) none seem to restart ( Firefox seems to thrash CPU utilization from near zero, to ~100% via trying to restart NoScript, and pounds away for many minutes, until I say this is not good ).
I have Vista Business 32, configured to work well latest FF 26.0.
Chrome ( SR Ironware Iron browser ) that I have zero bookmarks runs fine, I need FF to work reconfigured without a reinstall due to all the passwords I have loaded into the FF over time.
GIven that a minor ?10-20% reduction in Bookmarks that took me a few hours to do, returns the ability to not have to go to taskmanager to brutally shut the FF task when an exit from FF does not remove it and it s large memory footprint, and now mostly does, with minor reduction of a massive bookmarks set, this is weird. FF never exceeds my win 32 memory, largest footprint I had I think was ~1gb in memory from lots of web pages.
But presently I cannot seem to restart Noscript... which is troubling

I am not a software engineer, merely a user, I am not asking for help for me to personally fix what is a fundamentally a product software problem.
I'd also point out that in addition to Hanging in backups, 3 days actually of FF running the bookmarks backup that produced 50mb JSON file and 90 mb HTML backup file, after 1/2 day respite of actually being able to have firefox close on user exiting after i completed the backup and reduced bookmarks slightly ( ~10% deleted ), now it is back to its usual self, taking forever to shut down, looking like a memory hog monster with >0.5 GB ram footprint, and often grows upon exit that the program persists in Task Manager Process List ad nauseum, till a manual task manager forced shutdown.
A user ( not a software coder ) should not have to twiddle with arcane settings buried in some obscure file undocumented, to avoid having a program hog their machine for 3 days just to backup Bookmarks manually ( meaning the code in the bookmarks backup procedure is coded rather inefficiently when scaled to large # of bookmarks ),
and I suspect FF shutdown internal procedure similarly does some rather inefficient logging to needlessly find grained writing to files on disk upon request by user to EXIT ( hopefully shut in reasonable time to free the dual core CPUs from ?50-100% utilization for days to backup / save stuff I could care not enough to wait for days for backup completion.
If RAM was used to assemble the backup in memory entirely, then to enable doing a small series of long serial block writes to disk, I suspect this all might go smoother than what appear to be a huge series of small writes to the disk as present it seems.
Possibly less sensible at present, and I can tell this by watching the disk activity light slowly flashing and Task Manager CPU activity spiking 100% and dropping regularly ( at high frequency ) for hours or days in the case of manual backup.
Load ALL the data to RAM instead and do one large sequential write ( sort of obvious for performance of the code and avoiding days to backup bookmarks ? ) There is plenty of room to load the JSON or HTML directly all to ram, and massage, and dump in one long faster sequential write to disk? Or am I missing something?
The justifications explained are almost silly, as I merely want to use FF, not make a career of learning undocumented buried feature settings. I have better things to do with my time, and I will remark the issues I describe might not be unique to FF's browser, it might also be common on other broswers ( I do not know, but I will be gracious enough to say so ).
Granted the program is free, but memory and task management efficiency is mediocre for truly heavy users. I read a lot and have sometimes 100 tabs open, the manner this is handled with FF sometimes brings a dual core CPU in Win Vista ( optimized via reg settings recommended in deeper articles about VIsta to be more XP like in operation ) to its knees.
This reminds me of the creeping featurization of GMAIL where originally GMAIL was fast and efficient, impressively so, FF might not properly vet ADDONS for good memory and shut down behavior and might consider doing so, to block those which affect stable operation, from being downloaded, as might actually testing / validating the safety & security & privacy of some addons ( rather than presently leaving to unsophisticated users to do so haphazardly ).
just some obvious observations.
It should not take common users to fiddle with undocumented obscure features ( hidden settings in undocumented files ) to make a quality product ( FF is good ) run properly. There is something to think about here.

Soundtrack Pro not rendering FCP sent files

I have not been able to get STP to intergrate with FCP. I export with Audio file Project, do some processing, save in STP and when I get back in FCP it can't find the file. I get the error message that "Some Files went offline" when I try to reconnect it appears there were no render files made but can find no way to rectify this. Please help. Thanks.

When I send from FCP to STP it asks to "open a project file". The can be edited as a *.STAP file. When I save teh *.STAP file and got back to FCP - the audio in the FCP timeline has been updated with the changes.
This is what I understand to be the "nondestructive" way to handle it, since it is not altering the original audio file it is only changing the project file.
Still, this workflow isn't working. When going back to FCP after the audio is changed, STP crashes, or throws the FCP audio offline. When I try to re-connect the audio, FCP is looking for a " :render" file that does not exist.
To me, this means STP isn't properly rendering or saving the file.
I've not been able to upgrade my STP yet (still on 1.0), I wonder if this was fixed in later versions??

Can't download large exe file from HP website on 5.0

Download fails repeatedly when trying to download *.exe driver/sw update from this HP site: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-65961-4&lc=en&dlc=en&cc=us&os=228&product=3192753&sw_lang=&key=null&site=null
OS: MS windows XP pro 2002 SP2
The first download fails. Window w/filename shows up, then I click the 'retry' option (or you can simply right click filename and select 'retry'). It then downloads but I never see file on file system. Changed file download location in firefox settings to different drive, same results. Changed download to always prompt for location, still fails (i.e. exact same results, 1st time fails, 2nd time seems OK but file not visible). Checked OS file system settings and hidden files and system files are set to allow viewing. I am at a loss! No idea what to do but use a different browser. Help please!

Hi froggiedawg,
I'd like to reproduce your problem on my machine. Would you please give me some more info?
1) OS: Windows 7 64bit OS
2) IE: IE10. - What's the exact version of IE10? You can check it under IE Help > About Internet Explorer. Mine says 10.0.9200.16686
3) Protected Mode - IE > Internet Options > Security > Security level for this zone > Enable Protected Mode. Is this checked ON or OFF?
4) Enhanced Protected Mode - IE > Internet Options > Advanced > Security > Enable Enhanced Protected Mode. Is this checked ON or OFF?
5) Do you have Adobe Acrobat or Adobe Reader?
6) Adobe Acrobat/Reader - what version of Adobe Acrobat/Reader do you have?
7) Did opening a PDF in the browser (IE) work for you before? When did you start experiencing the problem?
8) Have you tried uninstalling and installing Adobe Acrobat/Reader?
9) Have you tried using Cleaner Tool (http://labs.adobe.com/downloads/acrobatcleaner.html) after uninstalling Adobe Acrobat/Reader?
Thank you for your help!
Rebecca

Captivate 6 not rendering video when publishing

Hello, I am very-brand new to captivate - as in, I've been using Captivate for around 36 hours.. I was given this project on Friday and asked to have it finished by Monday. After about 14 hours of pulling hair I think I've finally got the training finished, but when I hit publish only the slides that do not contain video show up. The whole thing plays when I preview within the software, but as soon as I export it goes away.
I'm running windows 7, my poor laptop is around 5 years old, and I'm using Captivate 6.
I swear I'm not crying as I type this.

Hi ,
Welcome to Adobe Forums,
Could you please check the exact version of Adobe Captivate (Go to Help > About Adobe Captivate) ?
Go to Edit > Preferences > SWF Size and Quality and uncheck both the options which says Advanced project compression and Compress SWF file ,
Save the project after the changes and republish the project with a new name and save it to the desktop .
After publishing make sure that you check the output by viewing .htm file not the .swf.
Thanks
Himanshu

Aperture 3 does not display QuickTime VR files properly

I am not sure if anyone can suggest a fix for this. If you drag a QuickTime VR file into Aperture - it will not properly play the QuickTime file.
I do a fair bit of Panoramic photos - and create QuickTime VR movies - I would like to collect everything inside Aperture.
I think that this is a serious bug - if anyone has any suggestions I welcome them.
Ian

I was running an up to date version of Aperture 2 on all three of my machines. I upgraded the 17 MBP to Aperture 3. All seemed to function normally. I exported "versions" from an Aperture 2 machine in an attempt to consolidate my libraries. No file names had been changed. "Do not import duplicates" was selected. Aperture 3 wanted to import all files even though some were already present in AP3. I went back and exported "masters" not versions, still saw all files being available for import.
Here is what the AP3 manual says:
"When you import images, Aperture automatically checks to see if any of the images are duplicates of previously imported images. Aperture checks the filename of the master to determine if an image is a duplicate of one in the library. Select the “Do not import duplicates” checkbox to prevent Aperture from importing duplicates. If this checkbox is unselected, Aperture imports all images, even if they are duplicates, and creates a new master with a different name for each duplicate. Aperture never overwrites or replaces a master that has already been imported."
So the question is the "filename" the same. The Finder thinks that the picture file exported from AP2 is exactly the same as the picture file exported from AP3.
Therefore AP3 is not correctly identifying duplicates.

When I render my project to a NTSC file for Computer play back, the audio is not rendered and the file has no sound. How do I fix it?

I build my project using videos and photos and I add sound at the end for a few photos. I then render the project to a NTSCDVD Standard file so I can play it on a Computer. Once the file is rendered and I play it, there is no sound at all. I am using Premiere Elements 13, recently installed on 12/29/2015. Previously, I had a trial copy and before I could uninstall it, it disappeared. I don't know if that had any thing to do with my full version.

richardson
On what computer operating system is your Premiere Elements 13 running? For now I will assume Windows 7, 8, or 8.1 64 bit.
What are the properties of your source video and photos and what project preset did you (manually) or the project (automatically) set as the project preset
to match those source properties? In this regard, please tell us the readings that you see under Edit Menu/Project Settings/General
Editing Mode
Timebase
Frame Size
Pixel Aspect Ratio
even if the fields look grayed out.
What is your choice under Publish+Share/Computer/ which is using the NTSC DVD Standard preset? Are you using Publish+Share/Computer/MPEG with the NTSC DVD Standard preset? If so, are you using the default export settings or customizing them in anyway under the Advanced Button/Video Tab or Audio Tab? If you export your Timeline to Publish+Share/Computer/QuickTime with a preset = NTSC DV, does your file have sound in the export with your player?
What are you using as the player for this export?
Let us start here and then decide what next?
Thanks.
ATR

Captivate 5 not rendering large exe files properly

Similar Messages

Maybe you are looking for