Captivate 5 SCORM 2004 3rd Edition ADL Testing Issues

I have published a project from Adobe Captivate 5 and am currently trying to get it through the Advanced Distributed Learning (ADL) Sharable Content Object Reference Model (SCORM) 2004 3rd Edition Conformance Test Suite. I was able to pass the first part: the Content Package Conformance Test and solve the initial errors I was experiencing. However, I now have a new set of errors relating to the Sharable Content Object (SCO) Run-Time Environment (RTE) Conformance Utility Test. It appears that they all stem from:
ERROR: The Terminate() method was never successfully called.
Here is the detailed SCO test log:
Attempting to Launch SCO C:\Documents and Settings\Administrator\Desktop\offender_transportation6\offender_transportation.html
Commit("") has been called
ERROR: The Communication Session is NOT initialized
ERROR: The SCO called the API methods out of order
ERROR: Commit Before Initialization
Terminate("") has been called
ERROR: The Communication Session is NOT initialized
ERROR: An invalid Terminate() call was made
ERROR: The SCO called the API methods out of order
ERROR: Termination Before Initialization
ERROR: The Terminate() method was never successfully called
ERROR: The SCO is SCO RTE 1.0 Non-conformant
The project is currently set to issue a completion status to the LMS after 22 slides have been viewed. Then the project should output the Quiz Results and Slide Views to the LMS. For Project End Options I have tried both: Stop Project and End Project. I haven't been able to find any other settings in Adobe Captivate that relate to this Terminate problem.
Can anyone give me some insight into what could be causing this error?

As I tested, Captivate really cannot support 3rd Edition.
I'm not sure what's the differences between 2nd and 3rd
Edition, but I found that Articulate's '09 series (
http://www.articulate.com/products/quizmaker-publishing.php)
outputs these two editions separately.
I hope Capative could update the module to treat 3rd
specially.
William Peterson
eLearning Master
http://www.sameshow.com/blog/

Similar Messages

CP8 reports score not percentage to LMS using SCORM 2004 3rd edition

Hi,
I have 24 questions and when I answer 2 questions correctly I get a score of 20, (each question being worth 10 points), but it is possible to send to the LMS a percentage and not a total score? This LMS does not calculate but just shows what is sent which is confusing to the learner. I'm using SCORM 2004 3rd edition.

Hi Rod,
Thanks for that tip, I've double checked that and it appears to be correct. I was under the impression that the reporting section would just be used for the criteria for completion and would still report the score/percentage.
This is what my screen looks like, pretty standard I think.
Any other areas that I should doublecheck? I was thinking of making each question worth 5 points but that would require manually adjusting each course, less preferred way to fix it.
I started thinking that under Quiz Result Message I only have Correct Question and Total Questions checked off, but don't know if that would cause the percentage to not output. Unlikely I think.

Which edition of SCORM 2004 does CP5 report in?

I'm watching a series of videos from ADLInitiatives and they mention that SCORM 2004 has various editions/vertions from 1-4. I was wondering which version CP 5 is conforming to?
Susan

Hi
Did you ever get an answer for this?
I'm trying to find which edition of SCORM 2004 (3rd, or 4th) that "Captivate 5" outputs to?
thanks!!

Editing a SCORM 2004 package - to make it stop sending a variable

Hi,
I'm using Captivate 4 to create a quiz > export it as SCORM 2004 package > and then upload it to an LMS.
When a user completes the quiz, the lms is correctly updated with the score, but the course status arent showing up correctly. When the user pass the quiz the LMS shows it as "Complete" (instead of "Pass"), and if they fail it shows as "In Progress" (instead of "Fail"). I tried all sorts of different captivate quiz scorring preferences but the issue is the same (passing "Complete/Incomplete", "Pass/Fail", "Score", "Percentage", etc).
Then I contacted the LMS support team and after some investigation they said this is probably to do with a bug in the LMS. Apprently Captivate packages pass back a variable called "normalizedMeasure", which is a valid SCORM 2004 call. However the coding in the LMS doesn't accept this variable - causing the issue I'm experiencing. They said they will be looking to fix this and issue a service pack upgrade to the LMS in few months time.
While this is fantastic news for me... I've got several packages that I've got to publish soon (so can't wait for an LMS fix). Therefore I am wondering anyone of you lovely Captivate and SCORM experts know how to change settings on the Captivate project or manually edit an exported Captivate (SCORM 2004) package so that this variable is not sent back to the LMS?
Many thanks

Hi Erik,
Thank you very much for your reply. But can you explain a bit more about how not to send the "Complete/Incomplete"?
Do you mean to disable this on Captivate before publishing the project from Captivate? The only way I could think of to do that is to disable reporting for the project (Quiz menu > Quiz Preferences). I tried this... but that publishes the project as a stand alone html + swf package, which I can't upload to the LMS. Even if I could I'm not sure whether it will talk back to the LMS so that the user's LMS record gets updated with the result.
Or did you mean to amend the package after its published out (as SCORM 2004) from Captivate? If so... I'd really appreciate if you could help me out with more instructions on how to do that, because I don't know much about SCORM scripting. I'd be more than happy to send you the imsmanifest file (or the whole package itself), if you can help.
Thanks again for taking the time to help me out.
Jay

Publishing folder not available SCORM 2004

Hello,
First, sorry for my bad english : I'm french.
Please someone can help me : I do not can launch my captivate project on my LMS : the message written is : The archive is not standard to SCORM 2004 (3rd or 4th ed)
I've already check the folder that content several files but I don't no exactly what kind of files are needed.
I work with captivate 4 and my LMS are MOS and syfadis.
Of course I followed the user guide and I put a cross in "Zip files" and "export html"
I dont no why but I can't attached the pictures with all the files in the zip folder. If necessary, I'll try later.
Thanks in advance

Hello,
I'm sorry to hear you're having trouble. Unfortunately, you've posted in the forums for Acrobat.com (www.acrobat.com); please post your question in the Captivate forum for help with this product:
http://forums.adobe.com/community/adobe_captivate
(Votre anglais est presque parfait - merci pour avoir fait l'effort!)
Bonne chance -
Rebecca

ADL Test Suite and SCOs

I have about five lessons that I developed as SCOs (Captive 5.5) followed by a Quiz. The idea is to use the Multi SCO Packager to wrap them as a single course to load onto an LMS. The problem I'm running into is testing the individual SCOs using the ADL Test Suite 1.2.7 and checking for SCORM 1.2 compliancy.
The five lessons do not have questions, is this part of the problem? I do want them listed in the proper order in the manifest so after closing one, the next one launches. So, I publish one lesson and run it through the Test Suite and I get an error message:
ERROR:   Time out exceeded
ERROR:   LMSInitialize() never invoked
ERROR:   Sharable Content Object is Non-Conformant
I used to have no problems before I switched to Cap 5.5 - or is it just me? Please advise. Let me know if you need me to share any files.
TIA!

Thanks, Rod, that actually helps alot. My courses have been launching through SCORM Cloud but the ADL Test Suite was throwing me off. Guess I've been out of the loop. I had grown accustomed to getting the validation from the test suite that I was even printing and using them as verification in my deliverables to customers. Got any insight on similar products/applications to use for verifying SCORM-compliancy?
EDIT: I'm looking into SCORM Test Track now. If you know of anything else, I'd appreciate your input. Thanks.
Message was edited by: bgarcia7168

How can I test the SCORM 2004 compliant based output from captivate

Hi everyone,
I have created a SCORM 2004 compliant based output file from Captivate itself. Before sharing it with client, I want to check that whether it is compliant or not.
Is there any tool to check the compliance check in LMS? I am new to this, please suggest and help...
Regards
Vikas Sharma

Hi RodWard,
I have tested the zip on scorm cloud and it worked well. Also shared it with the client. But client came back with a question that -
"SCORM Pacakage does not report partial completion. When a person stops training, we have the progress bar to indicate that they are at 0, 25, 50, 75 or 100%. So the SCORM pkg is inadequate. "
Now, I am facing an issue in doing these particular settings inside SCORM 2004 in captivate.
Note that, the captivate file is not a questionnaire and its a video with few animations and a player on which it is running.
Can you please guide me...
Regards
Vikas Sharma

Captivate 4 /SCORM 2004 Test not scoring correctly in LMS

Hello,
I've created a course in Captivate 4 with 5 points. I've uploaded it into my LMS using SCORM 2004. It will not score correctly. I have double checked all of the settings in my click boxes, buttons, etc. Even though I answer everything correctly it will not score me at 100% which is what I have the passing rate as.
Any ideas???
Thanks!

Hello,
Thank you for your reply. I have tried changing the reporting options to score vs. percentage and that doesn't work either. My LMS is Mzinga (Knowledge Planet). Below are screen shots of my settings.
How do I get the "Mastery Score" section of the Manifest settings to be available (mine is grayed out)? I read something about this on one of the disscussion forms but can't fibgure out what I'm missing to make it available. Could this setting have something to do with my issue?

Multi-SCO Packager does'nt works with scorm 2004 (captivate 7) ?

Hi everybody,
I recently published a mutli scorm using Captivate 7 and multi scorm packager.
Eveyrthing works great when I publish each content to scorm 1.2 and use multi scorm packager after. It works fine in my LMS (moodle or Dokeos).
But when I publish each content to scorm 2004 and after use multi scorm packager, my course doesn't work in my LMS. A new window is open but nothing is displayed.
Anyone has the same issue with mutli scorm packager from captivate 7 and scorm 2004 ?
Best regards.

Hi,
I just tested the same workflow as you mentioned, i created a new project in version 7, set reporting fro SCORM 2004 and published using multisco packager and uploaded it to an LMS (http://cloud.scorm.com)
I was able to launch and go through the course successfully which makes me curious about the nature of your course.
could you please tell us, if this was built in a previous version of Captivate?
can you upload the same package to scorm cloud and verify the results.
Caan you check the Edition of you settings which is 3rds by default. (Quiz-- Quiz Preferences-- Scorm 2004--Manifest), republish and then upload again.
Good Luck.
Anjaneai

Can anyone verify which version of SCORM 2004 Captivate 4 supports?

Captivate 4 in supporting SCORM 2004 writes 1.3 out to the manifest.
Obviously it supports SCORM 2004 version 1, but can anyone verify whether it does support either version 2 or version 3 of 2004?
We're trying to make sure our LMS is up to the latest specs. Version 4 just came out in March 2009, so we don't expect any products to support that yet, but we at least want to be able to support the latest Version up to that being used.

Cp4 should be able to ouput SCORM 2004 content that plays in an LMS that supports any of the 4 editions.
This does NOT mean that Cp4 has all the new changes already built into it.
But it does mean that Cp4 still handles the basics that are core to each version without attempting the latest extras.
The latter editions of scorm 1.3 (aka scorm 2004), added to and clarified aspects of the spec (e.g. sequencing and navigation control between sco's, global variables that can be shared between sco's, etc.), but Cp does not do any of that anyway.
There is one big thing that I did come across though that I want to mention.
Early on, they changed the name from scorm 1.3 to scorm 2004.
As a result, you can have equivalent courses, whose only difference is that the manifest file refers to the spec by a different name.
Many LMS vendors have accounted for this and it should not make a difference.
However, I had a case where the version of the LMS being used was released when it was still called scorm 1.3.
My courses (which were scorm 2004, 2nd and 3rd edition) initially would fail the basic package validation when uploading because it was looking for "1.3" in the imsmanifest file.
Changed the line in the manifest to reflect the old name, and suddenly everything was fine again.
In my case, to verify I ran the package through each iteration of the ADL Conformance Test Suite for scorm 2004 (just adjusting name of the referenced schema) and it ran through without a hitch.
Hope this has helped.
Russ

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

Still struggling with Captivate 6, Oracle LMS and SCORM 2004

Still can't get this course tracking with scores. Herewith the screen shot. Does anyone know if the settings I have chosen for the quiz are correct. When I load the published course into the lms and test it, it shows "not attempted" prior to opening it and it gives the final score on the last quiz slide. There is a slide after the last quiz slide. It still seems not to transfer the scores to the lms. I recently found out that we have Scorm 2004 version 4, so I changed the configuration setting as it was defaulted to version 3, but that still hasn't helped with the scores. Under the start and end settings, I have chosen close project for the end. I have been through a week of torture with this course! Please can anyone assist as I'm not sure what to do anymore!

Oh no. Now I'm panicking! I will try it. Thanks
Mrs T Cassisa
Oracle Learning Management Practitioner
Tel: 27 (21) 403 3069
Fax: 27 (21) 403 3333
www.parliament.gov.za
>>> RodWard <[email protected]> 2/26/2014 11:20 AM >>>
Re: Still struggling with Captivate 6, Oracle LMS and SCORM 2004
created by RodWard in Quizzing/LMS - View the full discussion
This sounds like you have some major issue in this course project file.
Breaking it up into smaller files might not fix your issue.
I suggest you create a new blank CPTX project file, add one true/false quiz question, set it to report to LMS with the settings you have above, publish as a single SCO package zip file, and upload to both your LMS and SCORM cloud.
If this file doesn't even work, your installation of Captivate would have to be suspect and nothing you do in course module is going to fix that until you work out what the problem is. If this very simple single-SCO lesson plays OK and reports successfully to the LMS, then we need to figure out what is lacking in your current file.
It could be that your current file has somehow become corrupted. See the suggestions here for how to debug general corruption issues:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic- troubleshooting-techniques
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6158090#6158090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6158090#6158090
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6158090#6158090. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Quizzing/LMS at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Captivate 7 Scorm 2004 and some Errors

I've exported 2 captivate scorm files and used the Adobe Multi Sco Packager to create one course.
When we upload the packaged scorm file to the LMS we keep getting the following errors in the debug window:
Can someone point me where I can start to look on how to fix this issue?
55: GetValue("cmi.launch_data")
56: GetErrorString("403")
57: return "Data Model Element Value Not Initialized"
58: 403 Data Model Element Value Not Initialized
59: GetLastError()
60: return "403"
61: GetLastError()
62: return "403"
63: GetErrorString("403")
64: return "Data Model Element Value Not Initialized
----- and also the following:
83: SetValue("cmi.score.scaled","NaN")
84: GetErrorString("406")
85: return "Data Model Element Type Mismatch"
86: 406 Data Model Element Type Mismatch
87: Invalid data format for Real: NaN
88: GetLastError()
89: return "406"
90: GetErrorString("406")
91: return "Data Model Element Type Mismatch"

It should if you enable Interaction Data (default).

Interaction report in Fronter fails... SCORM 1.2 and SCORM 2004 problems...

I am using Captivate 2.0 and trying to make a SCORM content
that will report user interaction in the new Fronter 7.1
(www.fronter.com). I use the reload SCORM 1.2 player for complaince
check, since I do not have one for SCORM 2004 (
http://www.reload.ac.uk/scormplayer.html)
I have created a test cp file with just one question and 7
slides. I pack the output in .zip with SCORM 1.2.
When loading into the reload player I get the error message
Problem validating manifest
(file:C:/Documents%20and%20Settings/Martin/reload/reload-scorm-player/server/webapps/reloa d-scorm-player/course-packages/22/imsmanifest.xml:
12, 92): cvc-complex-type.3.2.2: Attribute 'xsi:schemalocation' is
not allowed to appear in element 'lom'.
I can see the .xml manifest from Captivate and line 12. The
manifest is posted at the bottom of this page.
Now when I use the LMS system fronter 71, which has SCORM
2004 and SCORM 1.2 support, the whole package loads and reports
pass/fail but not the user interactions. Fronter 71 has support for
this, and I would like to know what I have done wrong. I tried both
SCORM 1.2 and SCORM 2004.
Here comes the manifest for scorm 1.2 and then afterwards for
scorm 2004
<?xml version="1.0" encoding="utf-8" ?>
- <manifest identifier="testthree" version="1.0" xmlns="
http://www.imsproject.org/xsd/imscp_rootv1p1p2"
xmlns:adlcp="
http://www.adlnet.org/xsd/adlcp_rootv1p2"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="
http://www.imsproject.org/xsd/imscp_rootv1p1p2
imscp_rootv1p1p2.xsd
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1
imsmd_rootv1p2p1.xsd
http://www.adlnet.org/xsd/adlcp_rootv1p2
adlcp_rootv1p2.xsd">
- <metadata>
<schema>ADL SCORM</schema>
<schemaversion>1.2</schemaversion>
- <lom xmlns="
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xsi:schemalocation="
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1
imsmd_rootv1p2p1.xsd">
- <general>
- <title>
<langstring
xml:lang="x-none">testfour</langstring>
</title>
- <catalogentry>
<catalog>Adobe Captivate Course</catalog>
- <entry>
<langstring
xml:lang="x-none">testthree</langstring>
</entry>
</catalogentry>
- <description>
<langstring xml:lang="x-none">min description
ML</langstring>
</description>
- <keyword>
<langstring xml:lang="x-none" />
</keyword>
</general>
- <lifecycle>
- <version>
<langstring xml:lang="x-none">1.0</langstring>
</version>
- <status>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">Final</langstring>
</value>
</status>
</lifecycle>
- <metametadata>
<metadatascheme>ADL SCORM 1.2</metadatascheme>
</metametadata>
- <technical>
<format>text/html</format>
<location>.</location>
</technical>
- <educational>
- <typicallearningtime>
<datetime />
</typicallearningtime>
</educational>
- <rights>
- <cost>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">no</langstring>
</value>
</cost>
- <copyrightandotherrestrictions>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">no</langstring>
</value>
</copyrightandotherrestrictions>
</rights>
- <classification>
- <purpose>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">Idea</langstring>
</value>
</purpose>
- <description>
<langstring xml:lang="x-none">min description
ML</langstring>
</description>
- <keyword>
<langstring xml:lang="x-none">Adobe
Captivate</langstring>
<langstring xml:lang="x-none" />
</keyword>
</classification>
</lom>
</metadata>
- <organizations default="testthree_ORG">
- <organization identifier="testthree_ORG">
<title>testfour</title>
- <item identifier="testone" isvisible="true"
identifierref="testone_RES">
<title>testtwo</title>
<adlcp:maxtimeallowed />
<adlcp:datafromlms />
<adlcp:masteryscore>80</adlcp:masteryscore>
<adlcp:timelimitaction>exit,message</adlcp:timelimitaction>
</item>
</organization>
</organizations>
- <resources>
- <resource identifier="testone_RES" type="webcontent"
href="cap2 1-2.htm" adlcp:scormtype="sco">
<file href="cap2 1-2.swf" />
<file href="cap2 1-2.htm" />
<file href="SCORM_support/scorm_support.htm" />
<file href="SCORM_support/scorm_support.js" />
<file href="SCORM_support/scorm_support.swf" />
</resource>
</resources>
</manifest>

Here is the one for scorm 2004
<?xml version="1.0" encoding="UTF-8" ?>
- <manifest identifier="tthree" version="1.3"
xmlns="
http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns:imscp="
http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:adlcp="
http://www.adlnet.org/xsd/adlcp_v1p3"
xmlns:imsss="
http://www.imsglobal.org/xsd/imsss"
xsi:schemaLocation="
http://www.imsglobal.org/xsd/imscp_v1p1
imscp_v1p1.xsd
http://www.adlnet.org/xsd/adlcp_v1p3
adlcp_v1p3.xsd
http://www.imsglobal.org/xsd/imsss
imsss_v1p0.xsd
http://ltsc.ieee.org/xsd/LOM
lomStrict.xsd">
- <metadata>
<schema>ADL SCORM</schema>
<schemaversion>CAM 1.3</schemaversion>
- <lom xmlns="
http://ltsc.ieee.org/xsd/LOM">
- <general>
- <identifier>
<catalog>Adobe Captivate Course</catalog>
<entry>tthree</entry>
</identifier>
- <title>
<string language="x-none">tfour</string>
</title>
- <description>
<string language="x-none">min description
ML</string>
</description>
- <keyword>
<string language="x-none" />
</keyword>
</general>
- <lifeCycle>
- <version>
<string language="x-none">1.0</string>
</version>
- <status>
<source>LOMv1.0</source>
<value>final</value>
</status>
</lifeCycle>
- <metaMetadata>
- <identifier>
<catalog>test</catalog>
<entry>test 1000</entry>
</identifier>
<metadataSchema>LOMv1.0</metadataSchema>
<metadataSchema>SCORM_CAM_v1.3</metadataSchema>
</metaMetadata>
- <technical>
<format>text/html</format>
<location>.</location>
</technical>
- <educational>
- <typicalLearningTime>
<duration>PT0H0M</duration>
- <description>
<string language="x-none">Average length of time to
experience this
Adobe Captivate Project.</string>
</description>
</typicalLearningTime>
</educational>
- <rights>
- <cost>
<source>LOMv1.0</source>
<value>no</value>
</cost>
- <copyrightAndOtherRestrictions>
<source>LOMv1.0</source>
<value>no</value>
</copyrightAndOtherRestrictions>
</rights>
- <classification>
- <purpose>
<source>LOMv1.0</source>
<value>idea</value>
</purpose>
- <description>
<string language="x-none">min description
ML</string>
</description>
- <keyword>
<string language="x-none">Adobe
Captivate</string>
<string language="x-none" />
</keyword>
</classification>
</lom>
</metadata>
- <organizations default="tthree_ORG">
- <organization identifier="tthree_ORG">
<title>tfour</title>
- <item identifier="tone" isvisible="true"
identifierref="tone_RES">
<title>ttwo</title>
- <imsss:sequencing>
- <imsss:objectives>
- <imsss:primaryObjective objectiveID="PRIMARYOBJ"
satisfiedByMeasure="true">
<imsss:minNormalizedMeasure />
</imsss:primaryObjective>
</imsss:objectives>
</imsss:sequencing>
<adlcp:dataFromLMS>.</adlcp:dataFromLMS>
<adlcp:timeLimitAction>exit,message</adlcp:timeLimitAction>
</item>
</organization>
</organizations>
- <resources>
- <resource adlcp:scormType="sco" identifier="tone_RES"
type="webcontent" href="cap2 2004.htm">
<file href="cap2 2004.swf" />
<file href="cap2 2004.htm" />
<file href="SCORM_support/scorm_support.htm" />
<file href="SCORM_support/scorm_support.js" />
<file href="SCORM_support/scorm_support.swf" />
</resource>
</resources>
</manifest>
Please help

SCORM 2004 in Blackboard

Hi
I am urgently trying to find a SCORM 2004 compliant module
that works in the Blackboard VLE system. We are struggling to
upload a SCORM 2004 module in our Blackboard VLE and want to
compare the two to see where we are going wrong. If you can email
me [email protected] if you have a simple SCORM 2004 module that
we could test on our system - in actual fact this can be Flash or
some other software like authorware etc.
Thanks

I am running into the same problem (not resuming after the student quits). I am using Captivate 7 and using SuccessFactors for my LMS.
Initially my courses would bookmark themselves and resume on the correct slide. I am using SCORM 1.2.
I then started messing with the advanced SCORM settings (as you did above) because of some other issues that we were having and now my courses are not bookmarking correctly. I just tried my course on Scorm Clould and it also does NOT bookmark or restart correctly.
Is there something in Captivate which will allow a developer to reset the SCORM 1.2 configuration back to their default settings? The problem is that I don't know what the default settings were. If there is no "restore defaults" button, would someone mind posting screenshots of what the SCORM 1.2 defaults (from the Captivate 7 Factory) are?
Thank you for your time.

Captivate 5 SCORM 2004 3rd Edition ADL Testing Issues

Similar Messages

Maybe you are looking for