Captivate-6-0-1-Update.dmg Update not recognized on Mac

I have Captivate 6.0.0.199 but when I try to use the Help window to update, it is grayed out.
I downloaded Captivate-6-0-1-Update.dmg directly, but when I try to launch, it says:
"The following disk images couldn't be opened. Captivate-6-0-1-Update.dmg not recognized."
My system is Mac OSX Lion 10.7.5 Processor 2.26 GHz Intel Core 2-Duo Memory 4 GB
I have administrator rights to my computer and am trying to run this as the Admin.

Do you have any other Adobe Application installed, are you able to check the updates and download & Install them using Adobe Application Manager
Thanks,
Anjaneai

Similar Messages

Firefox 4.0 dmg not recognized on mac os 10.5.8

trying to upgrade from firefox 3.6.
downloaded firefox 4.0 dmg file not recognized.
working with mac operating system 10.5.8.

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

How to get files of a dmg thats not recognized after a drive recovery

I just had to recover my hard drive I managed to recover my .dmg files that I created with a pass word using disk Image. Now when I go to open the dmg it ask me for the pass word I type it in and get this message ....Unable to attach "C-00055.dmg."(not recognized) so my problem is how to I fix this or get my files out of the dmg? its showing me that 50Gb witch is the correct size of the dmg I created I have done all the disk utility crap everyone keeps posting I need a real solution to this problem Im not familiar with the Terminal but if some one has a way to do it using the mac Terinal I dont have a problem using it if your instructions are clear.
Thanks .

You would need to restore your phone as a new device in iTunes, not from back up, that's the only way to remove the data.

Installing Firefox 4 onto mac os x "The following disk images couldn't be opened. Image: Firefox 4.0.dmg Reason: not recognized".

I was trying to install Firefox 4 onto my mac os x but after I download it and click on the file to install it a window saying "The following disk images couldn't be opened. Image: Firefox 4.0.dmg Reason: not recognized". I have tried downloading it again but the same thing happens.

No workie! mac os x 10.5.8

2nd generation shuffle won't take charge, not recognized by mac pro.

2nd generation shuffle won't take charge, is not recognized by mac pro. light will not go on

Hi nickh2913,
If you are having issues with your 2nd Gen iPod Shuffle, you may want to try the steps in the following Troubleshooting Assistant:
Apple Support: iPod shuffle (2nd generation) Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/shuffle2gen/
Regards,
- Brenden

My iphone is not recognizing my mac through bluetooth

bluetooth is on and my mac recognizes my iphone but my iphone is not recognizing my mac. i want to send some pictures from my computer to my iphone through bluetooth. my other computer is my main computer for my iphone, and this one has some photos i want on it.
YES MY COMPUTERS BLUTOOTH IS "DISCOVERABLE."

At this time Bluetooth on iPhone does not support file transfer. Bluetooth on the iPhone as only for Bluetooth headsets at this time.
If you feel this is a feature or suggestion that Apple needs to know about and or your interested in. Please go to http://www.apple.com/feedback/iphone.html

HT2518 pc not recognizing my mac

My PC is not recognizing my MAC when I use Migration Assistant. It just sits there and searches. Anyone know a fix for this?

i got it! i restored my ipod!!! haha... alright..
thanks anyways!
congrats-how did you restore if pc does not recognize ipod?

Macbook Leopard Update- Hard drive not recognized?!?!

Question- What do you think caused this problem, and how can I best fix it?
(See below for information)
Well, I finally decided to update to Leopard. I put the disk in my Macbook, and everything went smoothly as it verified the installation DVD- until the end of the verification, that is. A message screen would pop up telling me the disk was dirty. "Okay," I thought,"No problem." I was a bit puzzled, though, because the installation with the same Family Pack disk went fine on my father's Mac. I cleaned the disk, and tried again. And again. Each time, I was greeted with the same message at the end of the verification. Frustrated, I took the disk and my laptop to Best Buy, hoping someone could help me there. We ran the installation again... to no surprise, the same problem occurs. This time, though, when we quit the installer and try to reboot, after the gray screen with the apple at the beginning, we are greeted with a black screen with one command line. NOT GOOD! We rebooted the computer again, this time starting up with a disk to check the permissions and hard drive. The diagnosis: The permissions on my Mac are screwed up, so it's not recognizing the hard drive. The Best Buy guy claims the permissions have been messed up since I bought the Mac, and everything will be just fine and dandy after I transfer the data to another computer, install the Tiger disk that my Macbook came with, update to Leopard, then transfer the data back to my Mac. I'm taking my Mac to the closest Apple store (about 2 hours away) for advice from the pros on Saturday. Until then, I'm hesitant to even turn the thing on, out of fear it will spontaneously erase the data or something to that extent.
Question: (in case you forgot)What do you think caused this problem, and how can I best fix it?

Unplugging worked!!!
I have no idea what PRAM is but someone said that unplugging your computer resets it so, I thought I'd give unplugging a shot. So, I shut down my computer and unplugged it. I also unplugged the power on the HD. (because I wasn't sure which one they were talking about.)
Anyway, I went away for about five minutes.
I came back plugged in the HD power first. Then, I plugged in the power cord for the computer and turned it on.
As soon as I logged in I was asked if I wanted to use my external HD for Time Machine backups.
I saw the icon for the HD on the Desktop where is belongs. I can open the drive and access the files with no problem.
Try this if you haven't yet.

IOS5 Update causes Device not recognized in iTunes for Windows

iOS: Device not recognized in iTunes for Windows
I did an iPad1 IOS5 update and on the reboot could not get iTunes to recognize my iPad.
I did all the recommended troubleshooting to no avail. So I called this morning and while on hold I put my password back on my device just as before and BAM iTunes now recognizes device and is doing my restore.
So if you do a backup of your device before the update and you have it password protected, it won't recognize the device until you go through and setup a new device and put your password back to what is was before, then BAM you're good! Good Luck and hopefully you won't have to spend the day I did figuring this out.

Hey there andrijfrommississauga,
I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT204406 Updated software. iTunes not recognizing devices.

I recently updated my Mac with Mac OS Lion to get it to version 10.6. Now my iTunes is not recognizing any of my devices nor letting me purchase music in iTunes. What am I missing? How do I get my devices recognized with this new software version?

Welcome to the Apple Support Communities
The latest iTunes version is 11.0.1. Open iTunes > About iTunes to check the version, and if you don't have this version, open  > Software Update to install the most recent version

IPhone not recognized after Mac security update

I have a Mac iBook G4 running OSX 10.4.11, and an iPhone 3G running OS 3.0. Up to now they have worked fine together. The phone was charged on the iBook this morning. This afternoon I ran software update on the Mac which installed the latest security update (2009-05, I think). After that, the phone is not recognized when plugged in the USB port. It no longer charges, nor is it recognized by iTunes.
I have checked the following to be sure that the security update is the culprit:
The iPhone with the same cable works fine on another Mac (running 10.5).
Other devices (thumb drive, printer) work fine in the same USB ports.
Finally, I restarted the iBook from the original installation CD for OSX 10.4. When running with the original version, the iPhone is recognized correctly.
So, I am reporting a problem with the security update, and I need to know how to back it off, or how to get it fixed.
Thanks for any help.
NOTE: Software update also installed iTunes 9.0.1 along with updates to Quicktime and Safari. However, none of these apps even have to be running to show that the phone will not charge.

The problem was solved by resetting the System Management Unit, thanks to a helpful phone call with an Apple Expert. On the iBook this required unplugging, removing the battery, and holding the power button in for 15 seconds.
Earlier I tried zapping the PRAM, as someone suggested, but the phone was not recognized. But it turns out it did show up in the System Profiler.
I have no idea why this happened in the first place, right after the software update.

[Solved] After update, media keys not recognized.

After I updated today, my play, stop, forward and back keys work, but not recognized in xbindkeys -mk. My vol up, down and mute do not work and are not recognized. I also cannot ctrl+alt+backspace to restart x.
Last edited by haxit (2009-05-02 15:26:49)

Acecero wrote:
haxit wrote:I also cannot ctrl+alt+backspace to restart x.
Add this
Option "DontZap" "false"
to the "ServerFlags" Section in the xorg.conf file.
Zapping has been disabled by default with xorg-server 1.6
Thanks a lot.

Updated contacts do not sync from Mac to iCloud

Updating or adding contacts in my Mac addressbook are not synced to the cloud. But if I make changes in my contacts on my iPhone or iPad, sync works perfectly and updates are reflected in my Mac addressbook. I'm running Lions on a MBP.
Any hints much appreciated.
THX
Daniel

First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

AIR 's .dmg file not working in mac

Hello,
I create a .dmg file for air application using adt command but when i open this file in mac it gives me message that "Following disk image could not be opened " and reason " not recognized" .
Can u please help me how can i create .dmg file from .air which run in mac .
i used a nativeprocess in this air application.
Thanks in advanced.

Did you create the DMG using a Mac?
Please see your post for additional information: http://forums.adobe.com/message/3040717
Thanks,
Chris Thilgen
AIR Engineering

Can't download free trail version. DMG file not recognized.

I am having hard time getting my hands on the free trial of Final Cut Pro X. The dmg file that downloads is only 175 bytes. When I open it, a warning box pops up saying the image is not recognized. Is this an issue on the Apple end of things or mine?

Thanks for the info. That is indeed the download address I have tried using. I do not have a previous version of FCP installed. Is there a way to get a free trial with out having previously purchased a version of FCP? I am new to FCP and would love to try it out before dropping hundreds of dollars.

Captivate-6-0-1-Update.dmg Update not recognized on Mac

Similar Messages

Maybe you are looking for