Captivate 6: Can't get any JavaScript to work when published as SWF

Version 6.0.1.240
Windows 7 x64
I have a button with an action of "Execute JavaScript" and can't event get a simple alert("hello"); to work when published as SWF. I've tried publishing it with each of the different Flash Player versions. JavaScript works fine when published as HTML5.

@Erickj: Either do what Rod stated (adjusting your Flash Security settings) or test your content from a true web server. Flash automatically trusts content coming off a true web server where the web address begins with http or https and ends in .htm or .html.
The nice thing about Cp 7 is that it has a built-in web server so you don't run into issues like this when testing your content.

Similar Messages

I can't get any sound to work on my iPhone 4S unless I have the headphones plugged up. Help...

i can't get any sound to work on my iphone 4s unless the headphones are plugged up

http://support.apple.com/kb/TS2802

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

Can't get any audio "changers" working

Hello, I have HP Pavilion 2250so, and I can't get any audio changer or like that working. I can't get Dolby Advanced Audio working and the IDT Audio which is already on my computer doesn't work, evey time I try to start that, it says -"IDT PC Audio has stopped working. I don't mean that I don't have sound in my computer, no I have but I can't get those audio programs working which are like equalizer in Windows Media Player 11 that you can add bass boost and stuff. Any help?

I would recommend that you first try updating the IDT Driver using the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112600-1&cc=us&dlc=en&lc=en...
If that doesn't seem to help, try updating your BIOS: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116222-1&cc=us&dlc=en&lc=en...
Let me know if either of those helped to resolve your issue or not. If they do not, let me know and I will see if I can find anything else to help you.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I can't get the volume to work when I use firefox. It does work on internet explorer. What is going on?

I downloaded firefox in order to do some online training that I couldn't open in any other browser. I can't get the volume to work in this browser. I can use internet explorer and the volume works. But I can only do the training through firefox.

You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer. 
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level. 
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process. 
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound. 
See also:
* https://support.mozilla.org/kb/No+sound+in+Firefox
* https://support.mozilla.org/kb/Video+or+audio+does+not+play

I can't get any sound to work on my ipod touch

I cannot get any sound on my ipod touch. When I am listening to music the volume bar is not visible and when I am on my apps it says no volume available. Anybody have any suggestions on what I can do to fix this?

Here is what Apple Says: http://support.apple.com/kb/TS2771
No sound through internal speaker*
Verify that the iPod touch is not set to pause.
Verify that the volume is set appropriately.
Verify that headphones are not attached to the headphone port.
Verify that Bluetooth stereo headphones are not paired wirelessly.
Try turning the iPod touch off and then on again.
No sound through headphones*
Verify that there's no debris in the headphone port.
Plug and unplug the headphones. Reconnect headphones and verify the connector is pushed in all the way.
Check the volume setting on your iPod touch.
If you are trying to listen to music and cannot hear any audio, make sure that the music is not paused.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPod touch with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another set of Apple headphones.
Try a different song or video.
Check other content, such as videos, to see if they exhibit the same audio issues.

Can't get any video driver working (X-Server)

Hi everybody (and thx for reading this),
I'm about to install Arch Linux 64 Bit on a new machine, an Acer Aspire 8935G. I installed Arch Linux on several plattforms over the last months with help from the brilliant Wiki-Guide. Unfortunatley I can't figure out how to get the X-Server running this time, so I need a little (???) help here to point me in the right direction.
System is up and running. Graphic Card is a ATI Mobility Radeon HD 4670 (and an Mobile Intel GM45). What I did so far was installing the radeonhd driver first (and later others, because radeonhd wouldn't work) and configure X with:
# Xorg - configure
Which resulted in a message of the X Protocol:
List of video drivers:
radeonhd
intel
ati
radeon
fbdev
vesa
after that I installed and ran HAL, to avoid problems with input hotplugging.
Finally, to test the configuration:
# X -config /root/xorg.conf.new
(EE) RADEONHD(0): rhdAtomGetDDCIndex: GPIO_DDC Index 5 exceeds maximum 5
(EE) RADEONHD(0): AtomBIOS returned 3 Grey Levels
(EE) RADEONHD(0): AtomBIOS returned 3 Grey Levels
(EE) RADEONHD(0): rhdAtomLvdsDDC: unknown record type: c
(EE) RADEONHD(0): ParseTable said: CD_INVALID_OPCODE
(EE) RADEONHD(0): atomSetBacklightFromBIOSScratch: rhtAtomDigTransmitterControl(atomTransEnable) failed.
^C
Playing around with vesa, intel and fbdev didn't bring me any further. Vesa and Intel led to a black screen without responding keys (hard reset is necessary every time) and FBDEV led to a error message:
Primary device is not PCI
(EE) FBDEV(0): FBIOBLANK: Invalid argument
Maybe it's an issue with the integrated full hd monitor, because of the DDC-Message, but googling around didn't help for the moment. The hardware works with Linux, Mandriva 32-bit-Image ran out of the box with X-Server and KDE 4.2. But I would prefer an Installation of Arch Linux with the software, I really need and want.
I will try to add the xorg.conf later on as I'm writing this on an other machine.
Thx in advance for the help!
EDIT (xorg.conf):
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
#Section "Monitor"
# Identifier "Monitor1"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
#EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # 
#Option "CacheLines" # 
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # 
#Option "PageFlip" # [<bool>]
Identifier "Card1"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by ewigkeit (2009-08-12 12:36:46)

zenlord wrote:You do know that with the latest xserver-xorg your xorg.conf is of less relevance?
Yes, I know. I also tried to get it working without an preconfigured xorg.conf. You know it... yeah... results in a black screen ;-).
zenlord wrote:And are you using the latest software? I installed Debian stable on a G45-chipset with intel graphics last week and I had to use at least the 2.6.2-driver IIRC, or upon loading the (old) driver, the DVI-port was disconnected and I was left with a black screen, but otherwise working install
Yesterday, I experimented with the Intel driver, because I found out that Mandriva also uses them, not fglrx like I thought. First I tried the xf86-video-intel. Have given me the typical X-Server feeling at start, probing the monitor I guess, than the backlight of the screen is on but the screen itself stays black. Fells like it's working, just the monitor is not respondig. Tried 1001 different screen settings, but the problem can't get solved. The same phenomenon can be experienced when usen the latest Intel-Git-Drivers from AUR. Last message of Xorg was: Setting up DRM Master or something like that. I will go and check it tonight again and report back.
zenlord wrote:The Ati-drivers are not supported anymore, are you sure your chips is not too new for the opensource drivers?
Like AdrenalineJunky stated radeonhd supports the card. I read about it yesterday.
zenlord wrote:And if even vesa is failing you, than there's more to it.
Where can I sign that? ;-)
zenlord wrote:Have you tried vga for a driver?
Not yet, will be done.
zenlord wrote:What is the output of
# cat /var/log/X.0.log | grep EE
Vesa-Setup
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux acer8935 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 18:10:38 UTC 2009 i686
Build Date: 14 August 2009 11:31:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 17 18:43:33 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xe40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:0:2:0) 8086:2a42:1025:019f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:1:0:0) 1002:9488:1025:019f ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xf0400000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fgl.renamed.libglx"
(WW) Warning, couldn't open module fgl.renamed.libglx
(II) UnloadModule: "fgl.renamed.libglx"
(EE) Failed to load module "fgl.renamed.libglx" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "fgl.renamed.libdri"
(WW) Warning, couldn't open module fgl.renamed.libdri
(II) UnloadModule: "fgl.renamed.libdri"
(EE) Failed to load module "fgl.renamed.libdri" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
dlopen: /usr/lib/xorg/modules/extensions//libdri.so: cannot open shared object file: No such file or directory
(EE) Failed to load /usr/lib/xorg/modules/extensions//libdri.so
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (loader failed, 7)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is:
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VESA(0): initializing int10

[Radeon] MSI RX9550SE Can't Get Any Drivers to Work

Board is recognized my O/S but I can only get a vidoe signal with generic VGA driver. Currently the board only shows in my devices as MSI RX9550SE T128 Secondary. If I try installing drivers from installation disk with board, latest from MSI site or Catalyst 5.3 from ATI I get the same result - black screen {no signal} using these drivers but system boots fine. All of these drivers cause message that they are not XP signed but I continue anyway. I have removed and reinstalled device numerous times, no difference.
I have set the BIOS AGP to 4 instead of 4x/8x. I have updated my BIOS and MSI board drivers to the latest. I notice in other threads that there may be issued with some MB for instability using PS/2 mouse and keyboard. Sometimes this devices are not recognized and have to reboot and wehn sw\itching users in XP system reboots itself. Have not switched to USB mouse and keyboard yet.
Kind of pointless to have this vidoe board if I can only run the generic VGA driver which gives me none of the performance the board should. I must have something not set right, this should work just fine. Any suggestions?

Got rid of MB drivers and ATI drivers, used Device Cleaner
Installed latest nVidia neoforce and ATI catalyst from their websites. Now XP Devices shows MSI RX9550SE T128 {and appears disabled} and MSI RX9550SE T128 Secondary {appears enabled}. Both show the driver as the current ATI driver I installed. If I enable the non-secondary device screen goes black but computer still runs (does not reboot}.
However, Advanced Setting from desktop properties under Adapter shows no identified adapter type with all items under Information as <unavailable>. Adapter properties say VgaSave. Catalyst Control Center does not open when launched and running ATI Wizard produces "Catalyst Control Center Desktop Setup Failed".
Seems like I have more issues than a driver problem. None of my devices report any conflicts. Any other ideas? MSI support says to use their drivers since they may tweak ATI's some for their products.

HT1212 My daughter's Iphone 4 locked while in the middle of changine the password. Now we can't get any password to work. Hooking it up to the computer and trying to reset the phone it tells me to turn off Find My Phone first. I can't. Help?

My daughter's Iphone 4 locked in the middle of changing her password. Now the old or the new passwords do not work. When trying to restore setting hooked up to the computer it says to enter the passcode on the phone first. I can't! Any help?

PhilipRoy wrote:
Please try putting your device into recovery mode to see if this will bring the device back. IF you are using iOS 7.0.4 you will need your apple id password to access the device.
http://support.apple.com/kb/HT1808
good luck.
If the device had Find My iPhone activated, yes. Otherwise, no, you don't need your Apple ID & Password, just because of iOS 7.
To access iCloud or iTunes, etcetera, yes. But that's no different than in iOS 6.

Can't get fade option to work when stroking a path!

For some reason I can't get the fade option to work when I stroke a path for line work in Photoshop CS 6. I'm using a wacom intuos 5 pro. I set my brush settings to fade and whenever i push stroke path with simulated pressure checked it does the thin to thick to thin line instead of a normal line that fades off.... anyone have a clue why? it seems to jump back to pen pressure no matter what I do......I went as far as uninstalling and reinstalling my walcom drivers and my copy of Photoshop.....I'm new to doing line work this way but like the consistency I see colleagues work!

Set the fade in the Shape Dynamics, then stroke the path Without enabling Simulate Pressure in the Stroke Path dialog

How can I get the keyboard to work when I try to type in passwords or crossword puzzle words?

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/951392]]</blockquote>
I suddenly can't get what I type in to show up on the screen. It won't print my user name or password to enter a site or print the answers in the crossword puzzle site I use.

Would you try Firefox beta from the Play Store to see if this helps? What crossword site?

[Solved]Can't get any bootloader to work

I previously had Mint installed on my computer and before I tried installing Arch on my computer I set up a virtual machine and installed arch on that with no problems on my first try. Now I've installed arch from the net install(same iso I used from the VM install and it's 64 bit) and it appears that everything installs correctly but when I reboot I get an error 15 from grub. When I installed I used syslinux not grub so I figure this is some remanent from my old Mint install. I tried installing with grub but got the same error. Then I installed with syslinux as my bootloader 3 more times and got the same error.
I set up the system with a single partition the first time(same as on the vm) and then I tried letting it do the auto partition but still no success.
I'd appreciate any input into what I'm doing wrong and I figure it's something simple I missed.
Edit: I installed arch successfully on a vm again so I'm sure it's some issue related to my hardware.
System Info:
AMD quad core processor
16GB Ram
5 hard drives, installing on a 500GB drive
The thing I can't figure out is that syslinux doesn't give me a choice to install to a specific hard drive so I'm not sure how I'm messing up the install. I also tried both the dev and uuid method of referring to my hard drives. This is really stumping me.
Last edited by tdraket (2012-06-26 23:18:33)

Sorry if I wasn't clear about the error. I said I installed syslinux and i was still getting the grub error still. I figured out that the error was due to the order my hard drives were booting in. I had to try every single order. The reason I was so confused was that I had installed grub the time I switched the hard drive boot order and I used the /dev/sdxy reference so I still got the same error. I had assumed that since there was a boot order then if nothing was found on one drive then the other drive would boot up. What happened when I changed the boot order of the drives was that with two of the drives I'd just get a blinking cursor and the other two drives would have the grub error 15. Then I switched the drive order after a syslinux install and i got it going to busybox because my /dev/sdxy were wrong because I changed the boot order. So I installed using UUID and then my problem went away. I appreciate everyone's help in this matter.
Summary: UUID is better than /dev/sdxy for drive reference and it I needed to change the boot order of the drives(it would be nice if my bios called them what they were in the boot menu like it does in the summary screen).

Can't get any Director to work on Win 7

Hiya:
and from what I see quite a few other people have the same proplem. It worked fin on Win XP, but when i went up to win 7 it installs OK, but won't stay on, and when it does come on for 30 seconds, the programs not right, (like no keyframes where they should be in the box) etc...
Bruce

Director MX2004 and newer wörk great on Win7 64 bit.
Mostly seen problems are with security in program files folder.
Install Director to eg c:\progs\director and it will work.
wolf

How can I get InDesign CS6 to work when it keeps crashing in Windows 8.1?

Hello,
I keep having a problem where InDesign CS6 shuts down unexpectedly, only after I've kept it open for a brief while.
The error message is:
"Adobe InDesign CS6 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
close program."
Has anyone out there encountered this?
Any idea on how to fix it? I was prompted by Adobe Update Manager to have updates installed recently. Photoshop CS6 seems to be working ok (I have Creative Suite Standard CS6)
Thank you.

What are you doing when the program shuts down? Is CS6 patched to 8.0.2?
Have you tried setting the compatibility mode to Windows 7 or Windows XP?
Do you have any non-adobe plugins installed, like a font activation plugin?
Have you tried trashing the prefs? See Replace Your Preferences

Can't get my iPad to work when I hook it up to tv says not supported

???

1. Apple Digital AV adapter+HDMI cable
http://store.apple.com/sg/product/MD098ZM/A/apple-digital-av-adapter
http://store.apple.com/sg/product/MD826ZM/A/lightning-digital-av-adapter
2. Apple TV
http://store.apple.com/ca/browse/home/shop_ipod/family/apple_tv

Captivate 6: Can't get any JavaScript to work when published as SWF

Similar Messages

Maybe you are looking for