Captivate 6 error at end of install
I’ve just gotten the following error after running Captivate_6_x64_LS12.exe. Not sure what it means or how I should proceed. Will paste in the contents of the error summary below. Any suggestions?
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF012, DS013 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 4 warning(s)
WARNING: DS013: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
----------- Payload: {9AB0EFC0-AC6B-11E0-9E61-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x86) 6.0.2900.2180 -----------
ERROR: Failed to install Microsoft Visual C++ 2005 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\sucohen\Desktop\Adobe Captivate 6 (64 Bit)\Adobe Captivate 6\payloads\Microsoft VC 2005 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2005 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: {797DA56D-AF0F-11E1-A68F-84A45F58D2FE} Adobe Captivate 6 (64 Bit) 6.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\sucohen\Desktop\Adobe Captivate 6 (64 Bit)\Adobe Captivate 6\payloads\AdobeCaptivate6_x64-mul\OEM(Seq 6195)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2005 Redistributable Package (x86): Install failed
Hi there,
Welcome to Adobe Community.
When you run the Captivate_6_x64_LS12.exe it actually extracts the installation files and put them on your desktop by default. There should be a folder on your desktop named Adobe Captivate 6. Inside that folder you should have a folder named payloads. Go inside the payloads folder and you should see certain Microsoft VC folders. You need to go inside every Microsoft VC folder and run the .exe file. Once you are done with installing all the Microsoft VC files then launch the setup.exe inside the Adobe Captivate 6 folder on your desktop.
See the screenshots below:
Hope this helps!
Thanks!
Similar Messages
-
Help - iTunes V4.8 'Program Error' at end of install.
Please can anyone help with this CD installation failure of itunes only (without ipod connected):
The installation of quicktime seems ok then iTunes, but on completion a window opens stating 'Program error, iTunes will close.. an error log was created'. No associated error number is displayed and I can't find the error log. At the same time the folder System32 opens. The Installation wizard says everything worked ok but if I then run iTunes the same 'program error..' window appears.
Thanks in advance.
PC pentium III Windows 2000 256 RAM, 7.5Gig free disk spacehi BB!
hmmmm. that's an unusual sort of error message.
let's first try taking any CD-drive complications out of the loop. download and save to your hard drive a fresh copy of the itunes installer from the apple website. (we'll run the install from there rather than on-line.)
http://www.apple.com/itunes/download/
try switching off all background applications prior to the install too (if possible, disconnect from the internet first):
http://consumer.installshield.com/kb.asp?id=Q108377
do you still get the same error then?
keep us posted.
love, b -
I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Error while trying to install EBS 12.1.1
We are getting an error while trying to install EBS R12.1.1 on Linux x86_64 os(RHEL 5.2).We are getting the error at step 2 of 5 during database configuration stage 33% (65%) stage.The error is as given below,
RW-50004:Error code received when running external process.Check log files for details.Running Database Install Driver for TEST instance.
We checked the log files and in ApplyDB_****.log the error is
RW-50010 :script has returned an error: 1
How to fix these issues??
Regards,
RupdiptHi Taj,
I am getting these error messages consistently throughout the log file,
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : testerp
sDbDomain : eigl.com
sDbPort : 1521
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1521:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Jul 22 17:47:10 IST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /d01/oracle/TEST/db/tech_st/11.1.0/perl/bin:/d01/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d04/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /d01/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/log/TEST_testerp/adcrdb_TEST.txt
Creating the control file for TEST_testerp database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:11 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2166536 bytes
Variable Size 427819256 bytes
Database Buffers 624951296 bytes
Redo Buffers 14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2166536 bytes
Variable Size 427819256 bytes
Database Buffers 624951296 bytes
Redo Buffers 14000128 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4652
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2166536 bytes
Variable Size 427819256 bytes
Database Buffers 624951296 bytes
Redo Buffers 14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:20 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
Whats the solution??
Regards,
Rupdipt -
Error in invoking target 'install' of makefile - Oracle Database 11g Releas
Error in invoking target 'install' of makefile '/home/oracle/B/product/11g/ctx/lib/ins_ctx.mk'. See '/home/oracle/app/oraInventory/logs/installActions2012-03-19_03-17-52PM.log' for details.
OS : Oracle Linux - Red Hat Enterprise Linux Server release 6.2
Oracle : 11g Release 2
Edited by: user13426437 on Mar 20, 2012 10:04 AMHere is the error message
INFO: gcc -o ctxhx -m64 -L/home/oracle/B/product/11g/ctx/lib/ -L/home/oracle/B/product/11g/lib/ -L/home/oracle/B/product/11g/lib/stubs/ /home/oracle/B/product/11g/ctx/lib/
ctxhx.o -L/home/oracle/B/product/11g/ctx/lib/ -lm -lsc_fa -lsc_ex -lsc_da -lsc_ca -lz -lctxhx -Wl,-rpath,/home/oracle/B/product/11g/ctx/lib -lsnls11 -lnls11 -lcore11 -lsn
ls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /home/oracle/B/product/11g/lib/sysliblist`
INFO: /usr/bin/ld: warning: libstdc++.so.5, needed by /home/oracle/B/product/11g/ctx/lib//libsc_fa.so, not found (try using -rpath or -rpath-link)
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `__cxa_pure_virtual@CXXABI_1.2'
/home/oracle/B/product/11g/ctx/lib//libsc_fa.so: undefined reference to `__gxx_personality_v0@CXXABI_1.2'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `
INFO: vtable for __cxxabiv1::__class_type_info@GLIBCPP_3.2'
/home/oracle/B/product/11g/ctx/lib/libsc_ch.so: undefined reference to `__gxx_personality_v0'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `vtable for __cxxabiv1::__si_class_type_info@GLIBCPP_3.2'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `std::ios_base::Init::Init()@GLIBCPP_3.2'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `std::ios_base::Init::~Init()@GLIBCPP_3.2'
/h
INFO: ome/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `operator delete(void*)@GLIBCPP_3.2'
collect2: ld returned 1 exit status
INFO: make: *** [ctxhx] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/home/oracle/B/product/11g/ctx/lib/ins_ctx.mk'. See '/home/oracle/app/oraInventory/logs/installActions2012-03-19_03-17-52PM.log' for details.
Exception Severity: 1
INFO: Linking Text executables
INFO: Linking Text executables
INFO: The output of this make operation is also available at: '/home/oracle/B/product/11g/install/make.log'
INFO: -
Error while trying to install SAP CE 7.1 EHP 1 on Windows 7
I am trying to install SAP CE 7.1 EHP 1 on Windows 7. I am getting below error while trying to install. can you please help to fix this problem?
Running msiexec failed with return code 1603: undefined
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
Thanks,
Sridhar.I donu2019t think so it is windows 7 or 64/32 bit hardware/software issue. I have faced u201Cmsiexec failed with return code 1603u201D error many times during SAP installation and solved this issue with below mentioned procedure.
Solution:
Just change the location of temp directory to empty folder in user environment variable without cancel installation in current user session. After that, click on yes button to continue the installation. If installation will ended after click on yes button, restart the installation with continue old installation option.
Regards.
Yasir -
Error in invoking target 'install' of makefile
Dear all,
When I install EM12C then I got this error is "Error in invoking target 'install' of makefile".
Please help me to solve this error.
INFO: /usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
INFO: make[1]: Leaving directory `/u01/app/oracle/product/middleware/oms/sqlplus/lib'
INFO: make[1]: *** [/u01/app/oracle/product/middleware/oms/sqlplus/bin/sqlplus32] Error 1
make: *** [newsqlplus32] Error 2
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/u01/app/oracle/product/middleware/oms/sqlplus/lib/ins_sqlplus.mk'. See '/u01/app/oraInventory/logs/installActions2013-07-26_08-43-01-AM.log' for details.
Exception Severity: 1
INFO: POPUP WARNING:Error in invoking target 'install' of makefile '/u01/app/oracle/product/middleware/oms/sqlplus/lib/ins_sqlplus.mk'. See '/u01/app/oraInventory/logs/installActions2013-07-26_08-43-01-AM.log' for details.
Click "Retry" to try again.
Click "Ignore" to ignore this error and go on.
Click "Cancel" to stop this installation.
Best Regards,
Kosal KongCheck for 2 more things -
a) Do the directory where you extracted your software (Disk1) and under Disk1 you should see following folders. Is WT.zip present ?
a@adcxxxxxxx Disk1]$ ls
install libskgxn plugins response stage WT.zip
jdk oms runInstaller wls
b) As Courtney mentioned, you ignore a pre-req failure and i suspect that you do not have glibc package on your host.
Go through the requires packages from -http://docs.oracle.com/cd/E24628_01/install.121/e22624/preinstall_req_packages.htm#CHDEHHCA
look at the log files
<ORACLE_INVENTORY_HOME>/logs/installActions<timestamp>.log
<ORACLE_HOME>/cfgtoollogs/oui/installActions<timestamp>.log -
Error in invoking target 'install' makefile
Hi,
I am trying to upgrade the EBS R12.0.6 Database 10.2.0.2 to 10.2.0.4 and applying the patch 6810189 and got the following error message:
Error in invoking target 'install' of makefile
/proddb/PROD/db/tech-st/10.2.0/plsql/lib/ins_plsql.mk
See /proddb/PROD/db/tech_st/10.2.0/admin/oui/PROD_qa2/oraInventory/logs/installAction2010-09-08_10-13-9AM.log
ACTION
Pause the Installation and uploaded the $ORACLE_HOME/install/make.log
and $ORACLE_HOME/admin/oui/CONTEXT_NAME/oraInventory/logs/<installActions_log>
====================================
Message in $ORACLE_HOME/admin/oui/PROD_qa2/oraInventory/logs/<installActions_log>:
INFO: make: 1254-004 The error code from the last command is 12.
Stop.
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/proddb/PROD/db/tech_st/10.2.0/plsql/lib/ins_plsql.mk'. See
'/proddb/PROD/db/tech_st/10.2.0/admin/oui/PROD_qa2/oraInventory/logs/installActions2010-09-08_10-13-09AM.log' for details.
Exception Severity: 1
======================================================
Message in $ORACLE_HOME/install/make.log
/usr/ccs/bin/make -f ins_plsql.mk install ORACLE_HOME=/proddb/PROD/db/tech_st/10.2.0/ chmod 755 /proddb/PROD/db/tech_st/10.
2.0/bin
rm -f wrap
Linking wrap
ld -b64 -o wrap -L/proddb/PROD/db/tech_st/10.2.0/plsql/lib/ -L/proddb/PROD/db/tech_st/10.2.0/lib/ -bnoerrmsg /proddb/
PROD/db/tech_st/10.2.0/plsql/lib/s0plsw.o -lpsa10 -lpls10 -lplp10 /proddb/PROD/db/tech_st/10.2.0/lib/nautab.o /proddb/PROD/
db/tech_st/10.2.0/lib/naeet.o /proddb/PROD/db/tech_st/10.2.0/lib/naect.o /proddb/PROD/db/tech_st/10.2.0/lib/naedhs.o `cat /p
roddb/PROD/db/tech_st/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /proddb
/PROD/db/tech_st/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lv
sn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -l
unls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /proddb/PROD/db/tech_st/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -l
nzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /proddb/PROD/db/tech_st/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs1
0 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -
lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -ls
nls10 -lnls10 -lcore10 -lnls10 -lld -lm `cat /proddb/PROD/db/tech_st/10.2.0/lib/sysliblist` -lm -lpls10 -lsql10 `if [ "\
`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/proddb/PROD/db/tech_st/10.2.0/lib/pw-syscall.exp"; fi;` /proddb/PROD/db/tech_st/10.2.0/lib/libplc10.a
-lpls10 -lclient10 -lnl10 -lnro10 -ln10 /proddb/PROD/db/tech_st/10.2.0/rdbms/lib/kpudfo.o -lmm -lgeneric10 -lcommon10
-lslax10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lsql10 -lld -lm `cat /proddb/PROD/db/tech_st/10.2.0/lib/sysli
blist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/proddb/PROD/db/tech_st/10.2.0/lib/pw-syscall.exp"; fi;`
make: 1254-004 The error code from the last command is 12.
Stop.
===================================
My platform details:
OS-> AIX 5.3 64-bit
EBS-> R12.0.6 64-bit Single Node
Current Database-> 10.2.0.2
Target Database-> 10.2.0.4
Please suggest any solution.
Thanks in advance.
Regards,
UmairHi,
You can follow the below action plan
1) If you have 10.2.0.2 software available in other location, then go to ORACLE_HOME/bin
script relink.log
./relink all
exit
check before the upgrade the relinking is working fine or not
If not this problem exist before the upgrade itself.
Note: For proper relinking of oracle binaries you need install all required OS packages as per the article 169706.1
2) if no error found in relink.log then log a ticket with oracle and it could be problem with specific release
Kind Regards,
Rakesh Jayappa
Edited by: Rakesh jayappa on Sep 13, 2010 6:24 AM -
Error in invoking target 'install' after extproc32 in x86_64 installation
Hi
I am trying to install patch p4547809 (9.2.0.8) however when it gets to 99% of the installation I get this error:
Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'
According to the log file the error is as follows:
Linking external procedure agent (/u01/oracle/9ir2db/rdbms/lib/extproc32)
rm -f /u01/oracle/9ir2db/rdbms/lib/extproc32
gcc -m32 -o /u01/oracle/9ir2db/rdbms/lib/extproc32 -L/u01/oracle/9ir2db/rdbms/lib32/ -L/u01/oracle/9ir2db/lib32/ -L/u01/oracle/9ir2db/lib32/stubs/ /u01/oracle/9ir2db/rdbms/lib32/hormc.o /u01/oracle/9ir2db/rdbms/lib32/defopt.o /u01/oracle/9ir2db/rdbms/lib32/homts.o -lagtsh -lpls9 -lplp9 -lclntsh -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 /u01/oracle/9ir2db/lib32/libgeneric9.a `cat /u01/oracle/9ir2db/lib32/sysliblist` -Wl,-rpath,/u01/oracle/9ir2db/lib:/lib:/usr/lib -lm `cat /u01/oracle/9ir2db/lib32/sysliblist` -ldl -lm -lvsn9
/usr/lib/gcc/x86_64-redhat-linux/3.4.6/libgcc_s_32.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make[1]: *** [u01/oracle/9ir2db/rdbms/lib/extproc32] Error 1
make[1]: Leaving directory `/u01/oracle/9ir2db/rdbms/lib'
make: *** [extproc32] Error 2
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'. See '/u01/oracle/oraInventory/logs/installActions2006-12-07_12-11-52PM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Here are some additional details:
rpm -q binutils gcc gcc-c++ glibc gnome-libs libstdc++ libstdc++-devel make \ pdksh sysstat xscreensaver libaio binutils-2.15.92.0.2-21gcc-3.4.6-3
gcc-c++-3.4.6-3
glibc-2.3.4-2.25
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3
make-3.80-6.EL4
sysstat-5.0.5-11.rhel4
xscreensaver-4.18-5.rhel4.11
libaio-0.3.105-2
>
I would appreciate any assistance on this. ThanksProblem is the compiler version. You need to use gcc 3.2 instead of 3.4.
-
Persistent 205 Error (Win 7) when installing Creative Cloud Desktop
Please help. I am at wit's end here. I am getting a perpetual 205 error when trying to install the Creative Cloud Desktop App.
I've reviewed these forums and have tried everything:
Disabling firewalls, anti-virus, and anti-malware programs;
Clearing cache;
Logging on as a different Windows 7 user;
Dowloading under a different Adobe ID;
Three different web browsers.
I even tried using my phone as a mobile hotspot for a download to see if a different internet connection would work. No dice.
VERY frustrated with Adobe right now. Any help would be appreciated.Click on the below link and download Lightroom cc 2015 installer file and install the Lightroom cc app :
http://trials3.adobe.com/AdobeProducts/LTRM/6/win64/Lightroom_6_LS11.exe
Same thing again :
Access Denied error ?
Open below link and then try to download Lightroom cc 2015 setup:
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html -
1602 errors when trying to install the Extended Asian Language font pack for Adobe Reader XI
My company is trying to deploy Adobe Reader XI 11.0.10 with the Extended Asian Language font pack via SCCM 2007, and some computers are failing the install of the Extended Asian Language font pack with 1602 error. Reader is installing successfully, but the font pack log file will have this entry:
ADelRCP logging: : In Process : MsiExec.exe
ADelRCP logging: : Setup terminated because critical files are in use or applications that interfere with files installed by setup are running. Review the preceding entries in the log file and close the applications listed before retrying setup.
CustomAction ApplicationInUse returned actual error code 1602 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 9:08:42: ApplicationInUse. Return value 2.
Action ended 9:08:42: INSTALL. Return value 2.
Our automation to install this is killing Reader and Acrobat before running the Reader 11.0.10 install, so I do not know what would be in use here.
I appreicate any suggestions you have. I can provide the entire log file, upon request. Thanks.Moving this discussion to the Adobe Reader forum.
-
Captivate freezing Error Message
Hi,
Captivate continues to freeze randomly through projects. I get the error "A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files. Please restart Adobe Captivate." I restart, yet I continue to face this error. This has happened to me 3 times already and it's very frustrating. I basically have to start over on my projects. My projects are saved to My Documents folder. I've tried clearing the cache.
I went through uninstalling and reinstalling Captivate but I got this error message after it finished: This is on a Windows 7 pc.
Exit Code: 6
-------------------------------------- Summary -------------------------------------
- 0 fatal error(s), 3 error(s), 3 warning(s)
----------- Payload: {948B7277-3D4C-4672-B1DB-24B3C83D704E} MultiSCOPackager 2.0.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Common Files\Adobe\Adobe Multi SCO Packager 2\MultiscoPackager.ico for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe eLearning Suite 2.5\Adobe Multi SCO Packager 2.lnk with target C:\Program Files (x86)\Common Files\Adobe\Adobe Multi SCO Packager 2\MultiSCOPackager.exe(Seq 980)
----------- Payload: {F9FAC696-2E48-497D-B820-C9A65DA630DF} Adobe eLearning Suite 2.5 2.5.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Common Files\Adobe\Adobe eLearning Suite 2.5 Workflows\en_US\win\extras\SuiteWorkflows\en_US\els_app.icofile:\\\D:\suiteBuild\elearnin g_mul\installerdev\elearning\project\stagingarea\win\extras\SuiteWorkflows\en_US\els_app.i co8632405c9a6d2fbac0fe79597739b3b85a6e898_98_05c9a6d2fbac0fe79597739b3b85a6e8 for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe eLearning Suite 2.5\Adobe eLearning Suite 2.5 Workflows.lnk with target C:\Program Files (x86)\Common Files\Adobe\Adobe eLearning Suite 2.5 Workflows\en_US\Main.exe(Seq 283)
----------- Payload: {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10} Adobe Captivate 5.5 5.5.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe eLearning Suite 2.5\payloads\AdobeCaptivate5.5Core\OEM(Seq 4002)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Captivate Reviewer: Install failed
ERROR: DW050: - Adobe Captivate Quiz Results Analyzer: Install failed
I've done google searches and I need some help from Adobe.
Thank you,
LoganExit Code 6 means that some of the supporting components for the application are not installed correctly.
Reason : may be they are already installed on your machine or they didnt got uninstalled when you tried to uninstall the application last time.
Try launching the application, it should work.
now for the error that you get with the project.
Please try to create a test project and see if you get the same error on that project as well.
if you do not get this error with the new test project, then try to copy all the slides of the original project into a new blank project, save it with a different name and then check.
Thanks -
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 3 warning(s)
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
----------- Payload: {FA19351D-E98C-48C1-B5E1-0C8C42B5E11C} Adobe Photoshop Elements 11 11.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Fonts/NuevaStd-BoldCond.otf" Error 0(Seq 1834)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1834)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 11/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 11/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 11/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 11/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 11/Adobe Photoshop Elements 11"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 11"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 11_AdobePhotoshopElements11_en_US: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11: Failed due to Language Pack installation failure
My platform is iMac, Processor 2.7 Ghz Core i5, 4GB 1333 MHz DDR3No problems remember the migration assistant is great for transferring files and settings. It is transferring applications from one computer to another which can end up causing unexpected difficulties.
Also another option if you are restoring from a Time Machine back up is to simply install OS X, create a new User account, and then use Time Machine to recover your documents and settings on the new computer. I have used this workflow the last two times I set up a new, or newly formatted Mac, with great success. I just picked the files and folders I wanted brought back and then clicked on the restore button. -
Adobe Captivate 6 Error when publishing
Help! I having trouble publishing a training that my employees can view. When they open the project they are getting the first image here that is essentially blank. I have attempted to reduce the size and save to different folders etc. but nothing seems to work.
Hi there,
Could you tell me the complete version of Captivate (Help > About Adobe Captivate). 6.0.1.240
Which version of Adobe Reader or Acrobat are they using? Adobe Reader XI
Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end? I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up. But, I am not sure if it is viewing for me because I have it on my system.
Re: Adobe Captivate 6 Error when publishing
created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412 -
Cfdisk error: Partition ends in the final partial cylinder
I was rearraging some partitions last night. I have two hard drives, both 1TB. They are (now) laid out as follows:
Drive 1:
- 40GB partition for Windows system
- 40GB partition for Arch system
- 920GB partition for backed up documents
Drive 2:
- 80GB utility partition
- 920GB partition for documents
I used fdisk to create the last partition on the first drive (the first two partitions were already in place). I pretty much just told it to create a 'n'ew, 'p'rimary partition and then accepted the default options in order to get a partition that filled the remainder of the drive. None of the partitions were in place on the second drive, and I tried using fdisk, but when I tried to create the first partition, it wouldn't allow me to start it at the beginning of the drive (it insisted on making the first partition start at sector 2048 rather than sector 63). I figured I'd try out cfdisk to see if it would allow me to start the partition on sector 63, and it did. Got those partitions created just fine using cfdisk.
However, I went back to check my work after I had created all the partitions and hit a source of confusion. cfdisk spouts out an error whenever I try to view the first drive. It says partition number 2 is bad and that the "Partition ends in the final partial cylinder". (Not sure if partition number 2 refers to the second or third partition. (Is the index zero-based?)) cfdisk has no trouble viewing my second drive, and fdisk has no problem viewing either of them. I'm a bit of a newbie with regards this sort of thing, so any idea why cfdisk has issues with my first drive?
The drives' layouts, as reported by fdisk:
Disk /dev/sda: 1000.2 GB, 1000203804160 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953523055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xea8fea8f
Device Boot Start End Blocks Id System
/dev/sda1 * 63 78124094 39062016 7 HPFS/NTFS
/dev/sda2 78124095 156248189 39062047+ 83 Linux
/dev/sda3 156248190 1953523054 898637432+ 7 HPFS/NTFS
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xead3ead3
Device Boot Start End Blocks Id System
/dev/sdb1 63 156248189 78124063+ 7 HPFS/NTFS
/dev/sdb2 156248190 1953520064 898635937+ 7 HPFS/NTFS
Last edited by nonoitall (2010-07-07 21:25:42)plasticeraser wrote:I would like to replace Ubuntu with Arch, unfortunately when I tried earlier I received, a cfdisk error that said "cfdisk error: Partition ends in the final partial cylinder". So I can't just delete the Ubuntu Partitions.
So you /do/ want to remove Ubuntu completely.
plasticeraser wrote:Since I'm at college I really don't want to format anything and possibly losing anything.
Maybe I'm not following, but it looks like you want to format (delete) your Ubuntu partitions, but then again you don't want to format anything. You can't just install Arch on top of your Ubuntu partitions and think it will just overwrite Ubuntu by putting Arch in the existing partitions. That'll just create a huge mess.
If your existing /home is on a separate partition, you can just use fdisk (instead of cfdisk) to delete Ubuntu's / partition so that Arch can use that instead. You should just use an installation medium to do the install process, it really is just a matter or removing your existing distro's / and telling Arch to install to that partition while still preserving your Windows 7 partition(s) and existing /home.
Maybe you are looking for
-
new to pages, so bare with me if this is a stupid question, but i can't find a way to change a string of text to be all text. in micro-soft word there is a button in the toolbar that you click and all the text you have highlighted will turn to all ca
-
Control attributes of each individual point in one plot
Can I do it? I create a spiral plot of about 490 points. At each data point I check something, if good I want a green point along the spiral. If bad I'd like a red point. So far, changing any attribute at any point in a plot changes them all, not
-
Re: canon EOS digital camera..
Transferring pics to imac some pics import and others show up as wrong format on the same import. I also used image photo to transfer to iPhoto same problem.
-
I am unable to write address in contacts as keyboard does not pop up
I am unable to write address in contacts as keyboard does not pop up. How do I input address?
-
Trying to install Sims 3 on my mac mini and it says it will 260 minutes
Running 10.5.7 this is the second install that has taken hours to complete. my MM is brand new 2ghz 4gig ram 100gig hd. I installed Sims3 on my MacBook pro and my daughters Macbook and it only took 19 minutes. any ideas?