Captivate 6 not resuming in SumTotal

Good morning,
I have packaged several courses in Captivate 6. When I load them in to SumTotal they are not resuming to the screen on which I exited the course. I have tested the courses in ADL SCORM tester and the lesson location is changing, but when I test the course in LMS it goes to the first screen. I am not using the TOC.
Any help will be appreciated.
Thanks,
Todd

Hi there,
Welcome to Adobe Community.
Please make sure that the Never Send Resume Data is not checked under LMS Advanced Settings in Edit > Preferences.
Also please check this on a free LMS called ScormCloud.
Thanks!

Similar Messages

Captivate not resuming after quiz complete just getting the loading screen

Hi Everyone.
I am using captivate 5 and have created a 60 slide project. The project contains 8 quiz questions and is published as scorm 1.2. The project is delivered using moodle 2.02. The problem is this. When the project is first launched it loads and plays correctly. If the student exits before the quiz is complete and then comes back to it later the project resumes correctly, The problem occurs where the student exits the project after the quiz is complete. If after this point the student tries to re-launch the project later, the project launches but gets stuck at the gray loading screen. I have installed the latest hotfixes and the problem seems to occur on all browsers.
Any ideas would be gratefully appreciated.
regards
J

OK. I've not struck this issue before with Moodle, but that may be due to using earlier versions of Moodle.
Here are a couple of things to try:
Try setting more grading attempts in Moodle and not make any changes to the Captivate lesson itself. If this now allows the user to open the module again, you know where the issue is.
If changing the attempts in Moodle has no effect, try changing the Required settings in the Captivate module Quiz > Settings. Set it so that the user can skip the quiz if they want. That's the least restrictive setting. If that now allows the user to progress again, this setting may be your issue.

My 2nd genertion Apple TV is not resuming playback that has been paused. Just starts at the beginning . Anyone else seeing this?

Anyone seeing their 2nd generation Apple TV not resuming after being paused? Mine doesn't offer the "resume playback" just starts the episode over. I Have reset the device, I have unplugged and rebooted. No change . Was working fine 1 month ago.

The setting you mention are in iTunes on my computer, but the podcasts I am watching aren't stored on my computer. I am setting the few podcasts that are to remember position and will see if that resolves the problem

ITunes upgrade download will not resume

Since the beginning iTunes has had one glaring failure in the upgrades. The downloads will not resume. I cannot even pause without it starting from scratch. Torrent technology is old stuff. But evidently too new for iTunes.
For testing do what the pirate sites do - unplug the connection, crash the OS, reboot, etc in the middle of a download. If it is corrupted you are doing it wrong. It should resume with minimal loss of packets. NOT start all over again.

It might also be worth submitting feedback via this form:
http://www.apple.com/feedback/itunesapp.html
That will guarantee that someone from Apple will see your requests ... we're predominantly a user-to-user forum here, and so there's no guarantee that someone from Apple will see what you've posted here.

Downloaded application from internet are not resuming aft OS restart.

I am downloaded one antivirus from internet.
It started downloading the latest defination and while downloading I restared the OS.... So I believe it should also resume as it is an OS feature ?right
My 2nd que is if it is not resuming then this should be a bug of OS or that application.

First of all, I do not think it is healthy for your machine in any way to start a process like you are describing and then just shut the machine off. After doing some tests, your machine should require you to close/stop the processes/applications after selecting to shutdown/restart your machine. Once you turn the machine back on it reopens the application/process that was opened prior to shutting down/restarting. However, I don't think it will resume with the process where you left off, but then again I really didn't test that part out.
For all intended purposes, Apple says that 'Resume' is basically a feature that allows you to not lose what you are currently doing within an App. in regards to having it open and then having to restart your machine because a software update requires you to.

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please.

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please. ?

Are you away from your home country?
Settings > General > International > Region Format > set to correct location?
Settings > Phone > Dial Assist > ON

RTMP Live Stream does not resume with Spark VideoPlayer Component

Hi all
The Flex 4 framework brought along the VideoPlayer component, which supposedly can automatically choose the best stream in terms of bitrate from a list of available multi-bitrate streams, play live videos and everything.
See http://help.adobe.com/en_US/flex/using/WSc78f87379113c38b-669905c51221a3b97af-8000.html for some information about it.
Here's a working example for an MXML application under the Flex 4.1 framework:
<s:VideoPlayer width="100%" height="100%">
    <s:source>
        <s:DynamicStreamingVideoSource streamType="live" host="rtmp://88.87.56.214:1935/live/">
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="19200"/>
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="9000"/>
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="3600"/>
        </s:DynamicStreamingVideoSource>
    </s:source>
</s:VideoPlayer>
The streams are valid and they play. However, I'm bumping into a problem when the stream is paused: it will not resume.
The player state alternates correctly between 'playing' and 'pause' when you keep clicking the play/pause button. However, once the first stream pause(or stop) occurs, the image and sound seem to freeze...forever.
Any help ore guidance are most appreciated!

I'm also facing the same problem.. Any developments in that ?

Canon 60D does not resume after auto power off

My Canon 60D does not resume after auto power off. It shows the empty battery icon when I press the shutter button, even the battey is fully charged. If I remove the battery and insert back it will resume to work. Any one had the same experience and know how to resolve it?

The power switch is actually a "software" switch. It's not like a light switch in that it doesn't actually provide or deprive the camera of power... only removing the battery will deprive the camera of power. This is why it doesn't actually just go dark when you switch off power... instead you'll usually see it perform a sensor clean cycle and then power down. The camera is technically in a kind of "sleep" mode monitoring the switch. If a Canon camera ever seems to lock up and ignore all input, the battery should be temporarily removed to "reboot" the camera. There is no "setting" in a camera that can configure it to ignore buttons. Although... if the camera is in an automatic mode, some input is deliberately ignored to make it easier to use the camera. Put the mode dial in a "creative zone" mode (P, Tv, Av, or M) and all buttons and menus should be accessible. You might try connecting the camera via USB cable to your computer and then attempt to control the camera via the Canon EOS Utility to see if that works. If the camera responds fine to the computer control, then likely the camera's main board and circuits are working fine and it may just be a wiring problem -- as if some cable simply isn't getting a very solid connection. If this is a wiring issue, you are probably better off sending it in for service.

My iTunes movie has stopped downloading and will not resume. Message says unable to download. All attempts to retry result in the same message.

My iTunes movie stopped downloading and will not resume. Any thoughts

 iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If it's a purchased movie, then just redownload it from the cloud (if not a rental)
 Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519

Streaming does not resume

Has anyone else suffered the problem that streaming does not resume on an iphone 5 handset? and if you have is there a known solution for it. It worked on the iphone 4 to my car stereo but now on the iphone 5 I have to manually press play again. Pairing occurs automatically tho. Just annoying more than anything as they both support the same bluetooth profiles.

Hmm, well FMS has some troubles with living for the long haul on virtual machine environments and it usually comes back to how those VMs present their network. When the VM does bridged network for instance it's sharing time with the proper OS to get connection traffic for its applications. The unfortunate nature of that was that when we tested the performance for network sharing from an FMS out of a VM was so bad that it couldnt' be supported as a good configuration. Consequently we recommend to most deployments of 'don't do that'.
If it has to get solves and has to be a virtual machine, then I'd recommend playing with the various network modes to see if you can find one that's going to play happier with the server's 24/7 networking needs. It seems like the VM/FMS combo is the problem then that's where I'd be looking.
Asa

Slideshow not resuming after certain buttons are used?

Hello,
I have this slideshow that I'm so close to having completed, but there's one issue I'm having with it not resuming after certain buttons are used. I've tried to figure out what could be causing this but I just can't see what it could be. I feel I'm so very close to having this completed if it weren't for this one issue.
In the slideshow buttons '1' and '2' work perfectly, however buttons '3' to '6' are not working completely as they should. During the slideshow, as it plays through the slides if you click on button '1' or '2' you are taken to the corresponding slide and then the slideshow automatically resumes, which is correct. However, if you click on any of buttons '3' to '6' you are still taken to the corresponding slide, but the slideshow does not resume and stays on that particular slide. I've looked over the Action Script 3 code several times and I just don't see what could be causing this but I'm not too experienced so there could be some error, no matter how minor, that I am missing.
I've attached the file and if anyone has any advice at all or can help in any way I would REALLY appreciate it!
Thank you,
William

In looking at the post I just made just now, I notice my attachment didn't come through. I'm not sure why this happened, but here is the code I'm using for the buttons:
btn1.addEventListener(MouseEvent.CLICK, btn1ClickHandler);
function btn1ClickHandler(event:MouseEvent):void
    gotoAndStop(10);
play();
btn2.addEventListener(MouseEvent.CLICK, btn2ClickHandler);
function btn2ClickHandler(event:MouseEvent):void
    gotoAndStop(55);
play();
btn3.addEventListener(MouseEvent.CLICK, btn3ClickHandler);
function btn3ClickHandler(event:MouseEvent):void
    gotoAndStop(105);
play();
btn4.addEventListener(MouseEvent.CLICK, btn4ClickHandler);
function btn4ClickHandler(event:MouseEvent):void
    gotoAndStop(150);
play();
btn5.addEventListener(MouseEvent.CLICK, btn5ClickHandler);
function btn5ClickHandler(event:MouseEvent):void
    gotoAndStop(210);
play();
btn6.addEventListener(MouseEvent.CLICK, btn6ClickHandler);
function btn6ClickHandler(event:MouseEvent):void
    gotoAndStop(259);
play();
And here is the code I'm using for slide images:
link_1.addEventListener(MouseEvent.CLICK, link_1ClickHandler);
function link_1ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=gifts%20worth%20givin g%20can&pricing=cad"));
link_2.addEventListener(MouseEvent.CLICK, link_2ClickHandler);
function link_2ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CU7323&pricing=CAD"));
link_3.addEventListener(MouseEvent.CLICK, link_3ClickHandler);
function link_3ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7292&pricing=CAD"));
link_4.addEventListener(MouseEvent.CLICK, link_4ClickHandler);
function link_4ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.apple.com"));
link_5.addEventListener(MouseEvent.CLICK, link_5ClickHandler);
function link_5ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7306&pricing=CAD"));
link_6.addEventListener(MouseEvent.CLICK, link_6ClickHandler);
function link_6ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=shocking%20deals%20-% 20cl&pricing=cad"));

HT202159 Mountain Lion will not resume download

I have tried to download Mountain Lion multiple times and it will continuously pause and now will not resume.

If you properly pause the download, it should be able to resume without any problem.
When I downloaded Mountain Lion, I paused and resumed hours later without any problem. But when it reached 95% of the download, my internet connection dropped for like 1 minute, and when it came back, the download restarted from zero.
So as long as the internet connection is not dropping during the download, you should be able to resume.

Listening to audiobooks does not resume in the correct spot

I bought a brand new Ipod Shuffle 4th gen. When I play audio books it resumes 30 minutes behind where I left off last. Is there any way to stop this?

P,S. I have already checked "Get Info" and "Remember Playback Position" is check. This is an audible.com audio book that I was listening to on my old shuffle which no longer works. I bought a new one and the same audio book does not resume correctly. It does not resume at the beginning of the book but about 30 minutes behind.

Premier Pro 5.5 - Sound will not resume after pausing video - HELP PLEASE !

Hi everyone.
I have a co-worker that is having a very strange problem. After he pauses a video and tries to restart it, video works fine but the sound will not resume. This doesn't happen all the time but it does happen often.
Please help.
Here is the system specs:
MacPro 2.6 Xeon
8 GB RAM
Kona Capture card
OSX 10.6
Thanks for you contribution.
JC.

Hi Todd.
I just finished running all the updates for adobe and it did not find any updates for Premier Pro, so the current version I have is 5.5. I'm going to check to see if there is any update I can download from Adobe that is not been detected by adobe updater so I can upgrade to Premier 5.5.1.
Thanks Todd.

My iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

Hi Goofy Goat,
Welcome to the Apple Support Communities!
It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Have a great day,
Joe

Captivate 6 not resuming in SumTotal

Similar Messages

Maybe you are looking for