Captivate 6 not showing complete in LMS

I can't get captivate 6 projects to show completed in my LMS (successfactors AICC format).  I can get captivate 5 project to show closed but not captivate 6.  Any ideas?

Captivate 6 had totally revamped drivers for SCORM and AICC.  Adobe ditched the ones they had used previously and went with Rustici drivers.  Rustici are the people that make the SCORM Cloud LMS.
I recommend you try uploading your content to SCORM Cloud to see if it works fine there.  If it does, then the issue is with your LMS, not your Captivate content.

Similar Messages

  • Will not show complete in LMS

    I've created training and a quiz using instructions provided
    by my LMS people.
    Under properties on the last slide, In navigation I was
    instructed to enter javascript:setExitState(); to make sure the
    course shows as "complete" in the LMS. I've gone through the whole
    training but the module still does not close out after the last
    slide and will not show as "complete" under the status.
    Any ideas?

    Hello and welcome to the Captivate forums!
    Depending on your LMS, you may need to change the settings in
    the Quiz properties. For example, some LMS products expect your
    materials to report Complete/Incomplete, while others expect
    Pass/Fail.
    Either that, or one or more of your individual scored
    interactions are not set up correctly.
    If you post the name of your LMS, perhaps someone else has
    the same one and can provide specific assistance.
    Regards,
    John

  • Captivate 5 Not Recording Completion in LMS

    Has anyone experienced this and know how to fix? Learners have 3 attempts to complete the module. Attempts are recorded but not completion.

    I am experiencing similar but inconsistent issues with Captivate content in SumTotal LMS (SCORM 1.2) -- athough I have used other e-learning authoring software, I am admittedly new Captivate user so assume that I am just unclear on exact settings to use when publishing for and/or uploading to LMS.  But I still can't figure out where/how to report simple completion of course (no real testing/scoring) to LMS, and can't seem to find any other documentation or discussions around these LMS publish settings, so any input/advice would those experienced would be much appreciated.  Thanks, JC

  • Query not showing complete data

    Hi,
    I faced this issue many times. Original query is not showing complete data but when I create a new query with same rows, columns and filters it gives correct data. Do anybody have any idea what can be the problem?

    Below is the checklist :
    1. Make sure you have same number of filters/ restrictions in both the queries.
    2. Make sure you are not using any authorisation object.
    3. Make sure the technical names of the objects you are using in the query are name.
    4. Make sure both the queries are on the same multiprovider.
    5. Make sure both are of same version.
    These are very basic things, I assume you must have done. But these are the only possibilities I could think of.
    If this is fine, then as suggested by Raman you can add one object each time in both the queries and test the output. You might get some clue.
    Thanks,

  • Itunes is not showing complete sentences

    My itunes is not showing complete sentences. For example the first option in the options box when my iphone is connected says "sync with this iphone over...". im currently running windows 7. Nothing i cant guess but it gets on my nerves. Please help thanks

    It appears this problem can arise in some cases when the Segoe UI font isn't properly registered.
    Close iTunes
    Open the folder C:\Windows\Fonts, or %Windir%\Fonts if Windows is in a non-standard location.
    Click the menu File > Install New Font...
    Select the Fonts folder in the folder panel, the panel above should list all fonts.
    Scroll down the list of fonts and select Segoe UI (True Type), then click OK
    Start iTunes
    Any better?
    tt2
    Oops, just seen you got it fixed

  • Captivate Quiz Not Reporting Correctly in LMS

    I am using Captivate 5.0 to publish a project to an EKP LMS. I am able to get the file to show complete in the LMS, but the quiz is not reporting correctly. Instead of a percentage it is reporting the number of points earned. Is there any way to have a percentage reported instead? I would appreciate any suggestions.  Grace

    Hi Grace,
    Can you check the Highlighted part and reset your Radio button to 'Percentage'--
    Thanks,
    Anjaneai

  • Captivate 6 not marking completions using IE 8

    About 90% of the employees completing a course that was created in Captivate 6 are not showing a completion status on the LMS using IE 8.  I understand that this is a provlem with IE 9 but I did not find any other documentation regarding IE 8. Has anyone else experiences this issue and if so, did you find a resolution other than adding a button to indicate the course completion?  There is no quiz with these courses.

    Hi, I am having similar issues under slightly different conditions...
    I am using:
    Captivate 7
    SCORM 2004
    Template: SendTrackingDataAtEnd
    Cornerstone LMS
    Multiple Browsers: IE8, Firefox, Chrome
    About 10% of my users are unable to complete their training even though they satisfy the completion criteria (view 70% of the slides.)
    No matter how many times they review the content, the LMS still shows the online lesson as 'In Progress.'
    I tested a sample course on the Scorm Cloud and it worked fine and showed completion across multiple browsers... Does this mean it is purely an LMS issue? How might I change my captivate file to send the time/completion data in a different way that my LMS may receive more frequently/efficiently?
    Thank you for your help.

  • S_bce_68001439 is not showing complete information (Report RSUSR100)

    Hi All,
    i have executed transaction s_bce_68001439 to get the information about the changes in the following areas:
    1- Users that are created during the year
    2- Users that are deleted during the year
    3- Users whose access rights are modified during the year
    4- Users that have been created and then deleted during the year which are not appearing the USR02 table.
    But the problum i am facing with this report is, the report is not showing all the information. Users that are careated during the year and are still active and appearing in the table usr02 are not appearing in the s_bce_68001439 report. Further, rights of certain users which i m aware that i have modified during the year, are also not appearing in the report. Due to these facts i am confused with the completness of this report.
    Can any one from this forum help me in getting the complete report which can fulfil my objectives as mentioned above. Further, can any one tell me the tables that are used by this report to extract data.
    Further, if there is any other mean to get the above mentioned information, please tell me how.
    Please help me.
    thx in advance
    Salman

    Hi Beckers,
    I am a member of SAP_ALL profile and have access to all the SAP transactions. so, there is no issue with the authorization. Further, I do not have any system refresh where the tables are deleted.
    Beckers, is there any other option thorugh which i can obtain the desired information i.e. directly through SAP tables or some other transactions or reports etc.
    The issue is not only comming with the 2009 users but also with the 2008 users data. which was OK in the last year. but now some of the information of the previous users are also missing if i am running the report for the previous year i.e. 2008.
    Thx
    Salman

  • Adobe Presenter Course not Marking Complete in LMS

    We have a course built with Adobe Presenter and was loaded into our LMS (sumtotal 7.5).  After completing the course, it is not marking completions.
    Here is what the settings are set for the course in Adobe Presenter:
    - enable reporting (checked) for SCORM
    - Incomplete--> Complete
    - success/completion criteria = user access
    - data to report = quiz score = points
    Any suggestions?

    Hopefully your SumTotal folks may have an answer...likely this has come up before?
    If not, better to ask in the Presenter forum (curiously hidden way in the Connect forum):
    http://forums.adobe.com/community/adobeconnect/connectpro_presenter
    Or check out this article - it's old, but maybe still helpful?
    http://www.connectusers.com/forums/viewtopic.php?id=1891

  • S_P00_07000134 not showing complete vendor address in generated file

    Hi All,
    In the file downloaded after using tcode S_P00_07000134 is not showing the vendor house no., but rest all things like the name ,street are fine..
    Please help what should be done to fix this or which sap note will solve this problem.
    Thanks.

    Hello Hemant,
    If you look inside the report, it is fetching the short address of length 80. it is as per standard program.
    the exporting parameter (ADDRESS_SHORT_FORM_S) in function module is referred to LIKE SZAD_FIELD-ADDR_SHORT of length 80 with data element AD_LINE_S.
    Please raise it to SAP, they might suggest you some SAP note for it.
    *  creation of a short one-line address for normal vendors :
        CALL FUNCTION 'ADDRESS_INTO_PRINTFORM'
        EXPORTING
            adrswa_in                      = wa_adrs
    *      ADDRESS_1                        =
    *      ADDRESS_2                        =
    *      ADDRESS_3                        =
            address_type                    = '1'
            address_number                  = wa_address_value-addrnumber
    *      ADDRESS_HANDLE                  = ' '
    *      PERSON_NUMBER                    = ' '
    *      PERSON_HANDLE                    = ' '
    *      SENDER_COUNTRY                  = ' '
    *      RECEIVER_LANGUAGE                = ' '
    *      NUMBER_OF_LINES                  = 10
    *      STREET_HAS_PRIORITY              = ' '
    *      LINE_PRIORITY                    = '6CO'
    *      COUNTRY_NAME_IN_RECEIVER_LANGU  = ' '
    *      LANGUAGE_FOR_COUNTRY_NAME        = ' '
    *      NO_UPPER_CASE_FOR_CITY          = ' '
        IMPORTING
    *      ADRSWA_OUT                      =
    *      ADDRESS_PRINTFORM                =
    *      ADDRESS_SHORT_FORM              =
            address_short_form_s            = wa_idwtpartner-wt_short_addr
    *      ADDRESS_DATA_CARRIER            =
    *      ADDRESS_DATA_CARRIER_0          =
    *      NUMBER_OF_USED_LINES            =
    *      NAME_IS_EMPTY                    =
    *      ADDRESS_NOT_FOUND                =
    *      ADDRESS_PRINTFORM_TABLE          =
        EXCEPTIONS
            OTHERS                          = 1
    Regards,
    Thanga

  • Printer does not show completed jobs

    I have an Epson Workforce 30 printer. After printing something, I check the printer icon in the dock to see if the job shows up as “completed.” Nothing appears. What can I do to remedy this situation?
    Thanks.
    Marta

    With the printer queue selected, click on the word Jobs in the menubar and select Show Completed Jobs.
    Pahu

  • SuccessFactors LMS not showing completion on Captivate 5.5 courses

    THis is the only info SuccessFactors is telling us.  I dont know where to find this settings in Preferences or Publishing settings. 
    Please double check the publishing settings to ensure the content is set to update lesson_status as soon as the user reaches the final slide.
    Republish and resubmit this new content to iContent and I will process it ASAP.
    Please let me know if you have any questions!
    LMSFinish('')
    LMSCommit('')
    writeData('cmi.core.lesson_location', 'PUTPARAM', 'CORE', 'LESSON_LOCATION', '33') returning true
    writeData('cmi.core.lesson_status', 'PUTPARAM', 'CORE', 'LESSON_STATUS', 'incomplete') returning true
    writeData('cmi.core.session_time', 'PUTPARAM', 'CORE', 'TIME', '00:01:14') returning true
    writeData('cmi.core.score.raw', 'PUTPARAM', 'CORE', 'SCORE', '0') returning true
    writeData('cmi.core.score.min', 'PUTPARAM', 'CORE', 'SCORE', '0') returning true
    writeData('cmi.core.score.max', 'PUTPARAM', 'CORE', 'SCORE', '0') returning true
    writeData('cmi.suspend_data', 'PUTPARAM', 'CORE_LESSON', '', 'hA1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24 nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP 1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1E none%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Eno ne%24nP1Enone%24nP000AA000AA') returning true
    commitData() called
    sendHACPMessage, props ==
    {version=2.0, session_id=C16941M3741S, command=PUTPARAM, AICC_Data=[CORE_LESSON]
    hA1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP 1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1E none%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Eno ne%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone %24nP1Enone%24nP000AA000AA
    [CORE]
    TIME=00:01:14
    LESSON_STATUS=incomplete
    LESSON_LOCATION=33
    SCORE=0,0,0
      returning 'true'
    sendHACPMessage, props ==
    {version=2.0, session_id=C16941M3741S, command=ExitAU}
      returning 'true'

    Hello,
    Welcome to Adobe Forums.
    Add a button on the Last Slide of your Project (Click to Finish) and enable "Include In Quiz" under Reporting (Properties Inspector)
    Make sure "Reporting Level" should be Interactions and Score (Under Edit -> Preferences)
    Thanks,
    Vikram

  • Captivate 7 not showing the red frame when recording a slide

    I've been using the "Record Additional Slides" button since Captivate 5, and never run into this problem: the red frame that lets you define what you want to capture is not displaying. When I try to record, Captivate captures a portion of the software window, and the desktop. How can I force the red frame to display?
    Thank you for your help!
    Heloisa
    *** By the way, it is happening when I run Captivate from my Apple computer. I just tested running Captitvate on my parallels machine, and the frame does show up.

    Hello,
    Just to clarify, the problem (no red frame while recording slides) happens only on the Apple version of Captivate. It runs fine on my parallel machine, however I am running a trial version there. My license is for the Apple platform. I'm concerned because my trial period will expire soon. the weird thing is that the Captivate that I have in my machine at home does not present this behavior. Only the one in my work machine.
    The project resolution is 930px x 697px
    This is the 14th module that I am developing for a training suite.I have never encountered this problem before. It all started after the Maverick's fiasco
    So do  you think I should uninstall Captivate and start a brand new install? I tried changing the name of the folder but that didn't help much.
    Thank you!
    Heloisa
    *****I just uninstalled and re-installed Captivate 7 7o my apple machine, but the problem persists. ;(

  • HELP quiz not showing up on LMS

    I recently upgraded from Cp4 to Cp5. Last week I converted a quiz into Cp5, tested it out by previewing it on the web. I published it and uploaded it to our LMS (SCORM 1.2; MeridanGlobal; iLearnOregon). At first my user was able to open up but it kept flashing and then just turned blue and froze. I upgraded to flashplayer 10.1 on my system and tried it out, now it when my test user opens it up on the LMS it states "loading...." but doesn't go anywhere, it has been loading for about 10 minutes now.
    I went back to Cp.4 and republished it and uploaded it onto the LMS, but now it is also doing weird things, it will allow the user in, and the first question is okay, but the 2nd question says it is the 6th question and it also doesn't show any navigation buttons, so the user can not move forward or back.
    I have published and republished serveral times. I have tried publishing to Flash player 9 and 10. Same results. I don't know what I am doing or did wrong????? HELP

    Hi,
    Would it be possible for you to share the  Cp 4 project file with me?
    Please mail the project to at [email protected]  Please do not zip the file as it might not reach me correctly
    Thanks,
    nsukumar.

  • Pdf in mail not showing complete

    when i either drag a pdf from finder to the mail icon in the dock, or use the send pdf with mail shortcut from the print dialog, the pdf only shows it's first page in the mail that's created.
    it seems however, that the attachment itself isn't corrupted, only how it shows up in the mail.
    any ideas? does anyone else experience this?

    thanks for trying to help, but i already know that i can choose to view as icon or as inline pdf. the issue is that when i create the mail, the inline preview is incomplete (one page), but when i send the mail to myself, the attached pdf is displayed completely (all pages). just a little inconcistancy, but it seems like a bug to me, because there is no way of telling whether i actually only send one page, all pages, or if the file has been corrupted.

Maybe you are looking for