Captivate 6 randomly dropping imported audio from slides during publish.

I think I remember this occurring in 5.5 as well, but only very occasionally. In this (my first) cp6 project, it's occurred 3 times already.
What occurs is that upon viewing the output (.exe), one slide will just not play the audio imported to it, although the slides before that one and the slides after it play their imported files.
I have re-published the project 6 times, and in two of those new publishes, it has dropped audio in a different slide, and played the audio on the slide where it previously did not play audio.
The imported files play just fine in all slides during preview in every case, so it seems to be occuring at publish. These are straight Audio > Import to > Slide wav files.
Anyone else see this?
At this point I just have to keep re-publishing until I get one that plays all files and call it a day.

Hi, Varun.
I finally got around to updating to 6.0.1.240 this morning.
The audio issue seems to still be there....it still drops imported audio from certain sildes, randomly. It changes with every publish.
THEORY: I noticed that on one of the slides where audio didn't play, the audio file contained a small silent region before the narration began. Maybe .3 or .5 seconds. I removed that silent portion so that the narration starts almost immediately (i.e. less than .2 second seconds of silence.) and for that slide, the audio did play at publish. So perhaps something in the playback exe is ignoring any audio that starts "too late" into the slide.... ?
I am now going back to check the audio files in every slide to remove any preceding silent passaages, and see if that cures this. Will update with my findings.
Another issue I noticed is that my background loop randomly stops playing. (This may have been in the previous build, too, not sure.) Not sure if this is in any way related.
If I pause and un-pause, the background music returns (starts at beginning of loop), and then stops again.. I verfied that "Loop Audio" is turned on.
Thanks.

Similar Messages

Importing audio from CD-where does it go?

I tried importing audio from a cd tonight for the first time, from within the audio window. Where does the file go? After I quit the song and tried to open again, the file could not be found. I tried importing again. When I put the CD in iTunes opened up and somehow renamed the CD "John Ford Radio"!? Anyway, I figured out that once the file was in the audio window I used the "move" function to copy the file to the song folder.
Is there an easier way to do this?

If you import audio from a CD, it stays on the CD. You probably saw a message something like "Insufficient privileges" which means that the OS recognised that it couldn't write the calculated wave overview back to the CD.
The best method is to copy it to your hard disk and check the Ownerships and Permissions within the Finder info. You need to have Read/Write on any audio file.
Finally, when saving your work, always use Save as Project since that will create a single folder with all your files nicely tucked away.
Pete

Adobe Presenter 9 and PowerPoint 2013 - Missing Import Audio from PowerPoint button

I am only able to intermitantly use the Import button in Adobe Presenter 9 to Import Audio from PowerPoint. Why would I be able to do it on some presentations but not all? I thought it was an audio conversion issue but even when I convert the audio (when prompted by PowerPoint) it doesn't always allow me to import it.

I have found a solution if the original PowerPoint was a ppt file, follow these steps:
File > Save As a pptx file
Close PowerPoint (this helps with not corrupting the file)
Re-open the pptx file
File > Convert
Save with a new file name (this helps with not corrupting the file)
You should now have the Import from Presentation button if you go to the Presenter tab and click the Import button
I have not found a solution for pptx files yet.

App to import audio from vinyl or cassette to Mac

I would like to import audio from my vinyl and cassette collection to my iMac.
Does anyone have any recommendations for a reasonably priced App which will do this successfully?
Any help would be appreciated.

Just tried this again. I may be missing something with the options in the dialog box which states the following defaults:
Format: ZIP
Method: Normal
Exclude Mac Resource forks (selected) - don't understand what that means?
Delete files after compression - not selected.
At the foot of the dialog box it states "Drag files to RarGenie in the dock"! Not sure what that means either.
Please don't spend any more time on this if you don't have an easy answer. I was really hoping to hear from someone who had used an available App in the App Store which they had found easy to use and not too expensive and which could be used with an appropriate hardware device.

Adobe Presenter 7 and PowerPoint 2010. No Import audio from presentation button

In Adobe Presenter 7 and PowerPoint 2007 I have the ability to import existing audio narrations by clicking on Import and then clicking the "Import from presentation" button. The button is missing in PowerPoint 2010. Any ideas on how to get it back?

Hello,
In PowerPoint 2010; "Import Audio from PowerPoint" is missing .We have logged bug for this. And we will definitely fix this in next release of Presenter. Please use PowerPoint 2007 to use this feature.
Thanks,
Shubhi

Trying to Import Audio from CD without Adminstrator rights

Hello,
I currently have 20+ computers running Audition and need to change my network to Active Directory signon. When I change a machine to AD and login as a USER I cannot import audio from a CD. I get a pop up screen saying You must be signed on as an administrator to import audio from as CD (and so on). I know this is a windows error because none of my CD ripping programs work EXCEPT Windows Media Player. I was wondering if ANYONE knows where I can change things so I can have users import from cd's? I know you can "run as" but now you are giving away the admin passwords and I know I can make a user with admin rights and have them sign in under that, but you are still giving anyone who thinks about it rights to sign in as that user with admin rights.
Any help would be GREATLY APPRECIATED!!!
Dave G.
Boston, MA

Apparently it's a deliberate policy decision on the part of Microsoft, and possibly one forced onto them by the RIAA. If you can get hold of a suitable policy editor for XP, then you can alter it. The instructions for fixing it with gpedit apparently go like this (although I've never tried it, I must admit)
Run gpedit.msc (via Start menu, Run..)
Select the following: Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options
Enable the option 'Devices: Restrict CD-Rom access to locally logged-on user only.'
That's all I know. If all else fails, download something like Windows XP Security Console, and try doing it with that.

Import audio from movie problem

Every time I import audio from a movie in Logic X, there is a glitch at the beginning of the audio. I just switched from 9 and never had this problem before. Anyone else experiencing this? I think it's a bug that needs to be fixed.

Its quite possible this problem is being caused by one of several audio file related issues in the current OS X 10.9.2 that apparently are fixed in 10.9.3
You can find out for yourself by installing the Public beta seed of 10.9.3 found here....
OS X Beta Seed Program
(Remember to make a full backup of your existing system drive before installing the beta OS X)

Import audio from sony mini disc player

Does anyone know how to import audio from a sony mini disc player? I have all of the ilife software as well as final cut. Any suggestions would be appreciated. Thanks so much.

Maybe Audio Hijack?
http://www.rogueamoeba.com/audiohijack/
Sue

How do I import audio from a website to Garage Band?

Brand new to Garage Band (on the Mac, not iPad). I am trying to import audio from a website with an .mp3 extension to Garage Band. I'd like to extract just a piece of the audio, so I assume GB was the best way to do it.
How do I import the audio to GB? If GB is not the best way to do it, any other suggestions? I need the piece of audio for a presentation I'm giving.
Thanks.

Do you have the audio as an mp3 file already? Then just drag it into GB's timeline. If you have to capture it first, there's several browser plugins that do it or general programs like Audio Hijack or WireTap.

Audio not synching during publish

Hello everyone. I'm working in Captivate 4, (purchased, not
trial). I'm relatively new user, but have been working intensely
for about a month developing my tutorial.
My project previews correctly, (entire file is 117 slides, 9
minutes long.)
However, after publishing to an AVI file, the audio does not
match up with the video - the audio playback is slightly slower,
and after 2 minutes, has lapped the slide.
I tried different publish settings, but have not found
anything to work, although changing some settings have improved the
output somewhat.
Does anyone have any suggestions for me?
This file will be published on YouTube. This is a
demonstration video only.
My audio was developed using text to speech, (so no music
quality sound is required) and each slide has one audio file per
slide, (nothing embedded.)
Settings I chose were:
Video Format: MJPEG Compressor (tried Indeo, but syncing was
worse)
Audio: PCM (only choice)
Encoding: FM Radio (64) and 11.025 KHz Frequency
Encoding Speed 5
I restarted, and do not have any other program actively
running (except Kasperski)
We recently reformatted the hard drive on this machine, took
every program off, defragmented, so the system is very lean and
clean.
Added more memory, so now we have 3 GIG of memory.
Running XP, the only installed programs are MS Office,
Kasperski, and Captivate.
Any help would be greatly appreciated!
Thanks!

Sorry everyone, I posted this in the wrong forum.
I reposted this in Captivate - General Discussion, titled
Audio not synching when published.
I did not know how to delete this post. Thanks!

Importing Audio from a DVD Concert

I want to import the audio from a DVD concet into iTunes.
I've tried MactheRipper and MAC3dec to do the conversion but the main concert file was 1 hour and 15 minutes long and it only imported the intro which lasted about 45 seconds.
What I'd really like to do is import the entire concert then cut it up into songs to import into iTunes.
So my questions are:
1. How do start with a 1.3 hour audio file on DVD and end up with 16 song files in my iTunes library?
2. Is it possible to do this with AudioHijack or a similar program?

The software is capable of extracting audio only at the chapter level. Using a DVD I mastered myself, I can use the Mode button, then select Title - Chapter Extraction, click the D button, and then the Streams button becomes active. Clicking that opens a drawer where all the various audio tracks are available, and they can be extracted one at a time using the SChpt and EChpt drop-down lists.
Again, please be sure that whatever you're doing with a DVD is legal in your own case. I am not suggesting that you use any particular software for any particular purpose, but just explaining how to navigate through a confusing interface in a program you already seem to have.
EDIT: I've read through your posts again, and you mentioned that you bought the DVD. Of course I can't be sure about this, but if it's a commercial DVD, it is most likely encrypted. In that case, you really must be sure that you have the right to extract audio tracks from the disc (or even to use the software in question)--even though you're not "copying" the disc by working only with the audio portion, it may be the case that even the audio on the disc is protected in some way by copyright. So, I can't emphasize enough that I in no way am encouraging you to do anything outside the scope of fair and legitimate use of your DVD product.

Import audio across slides

Hi, I'm using Captivate 6 on NT. I need to import audio across mutiple slides, but I don't get the Split prompt. I went into Preferences and reset the Confirmation Message to prompt me for Split Audio, but I still don't get prompted. I turned on prompts for all types of other things, but not Split audio. I am importing 30 minutes of audio to a 3-second slide, so it should prompt me. I Searched for the Preferences folder so I could rename or delete it, but I can't find it.
Thanks, Guy

Never mind, I got it! The prompt doesn't show up until AFTER it has imported the audio. With 30 minutes of audio, that's quite a lot of time! So I got the prompt and I'm good!
Thanks!

Can't import audio from .mov into iMovie 10.0.3

When importing a .mov file with sound into iMovie 10.0.3, the audio does not import with the video. I have no sound. The file plays and sounds fine on the desktop. What am I doing wrong?
Macbook Pro, OSX 10.9.3. 16G Ram, 768GB SSHD 2.7GHz Intel Core i7

Hello John,
Check out the first article for some troubleshooting steps to see if anything is preventing the audio from playing properly. Also try using QuickTime to convert the video in a different format and then import it into iMovie to see if that changes things.
iMovie is missing audio on import, export, or playback
http://support.apple.com/kb/ts2289
QuickTime Player 10.x: Export a movie in another format
http://support.apple.com/kb/PH5878
Regards,
-Norm G.

Can't import audio from clip into Premiere Pro CC.

I can export a clip, with audio, from Premiere Pro, but when I import it back into PP the audio track is missing. I noticed that when I delete the .xmp file from the file folder the audio will import with the clip successfully. Can someone please instruct me as to how I can edit the .xmp file so as to correct this problem? Thanks.

I export a clip using the "match sequence settings".
Mmm, don't ever use that. It's for people who don't know what they're doing, and often causes more problems that it solves.
Better to know what you're doing and set up your export manually. Try that, then report back what happens.

Importing audio from FCP

Is there a way to import audio projects from FCP into logic keeping the automation that the video editor has made?
Is there a file format other than OMF that contains the automation. and can FCP export it and can logic read it?
Is there a 3rd party application that can convert?
Or do I have to go back to the bad old days of Pro Tools (or worse, Soundtrack "pro")? PT LE is limited for soundtrack production, isn't it?
Is there anyone doing serious audio post production on logic, and if so, how are the projects imported?

The problem with exporting to AIFF, is that you can't crossfade between your cuts, or normalize regions. Your just stuck with the FCP raw mix. This is OK if your cut is relatively simple and you've already crossfaded and blah, but if you've got all kinds of dynamics going on, and different types of recording, you're definitely going to want more control over the export.
The problem with OMF, is that it doesn't translate well into LP. This seems to be a regular thing coming up on threads, apparently it works better with other audio editors but not LP. I've found that despite specifying handles on my export, non appear thus making crossfading impossible, you just get the same glitches your trying to eliminate.
HOWEVER the great thing is that apple invented their own format XML, an apple interchangeable file format. If you import this to LP, you get REGIONS like in FCP that reference the original files on your HD, which means you can now CROSS FADE, and NORMALIZE.
That makes me happy. I like it.

Captivate 6 randomly dropping imported audio from slides during publish.

Similar Messages

Maybe you are looking for