Captivate 6 showing bleedthrough on images and red flashes in video but not on individual slides

How do I get rid of this immediately. I needed this done yesterday

Change the slide quality of affected slides to Optimized or High Quality (24 bit).
Sreekanth

Similar Messages

HT3209 My account shows that I purchased and downloaded the ?video but it's not on my movie list. Where do I find it to watch it

I rented and downloaded a video but it's not on my movie list. Where do I find it to watch it

I went back to the Mac App Store and tried to reinstalled but it is not an option - it just has a faded 'Installed' indicator
Allen is probably right, and calling Apple the solution, but this is puzzling - if the AppStore shows your Aperture version as installed, then the Application probably still is somewhere on your Mac. If it were gone completely, the AppStore should offer Aperture for downloading again.
Have you tried to open Aperture by double-clicking your Aperture Library? The Aperture Library probably is located in the default location in your "Pictures" folder.
Since your Spotlight search was not successful, have you tried to search your Mac for all Applications using the Finder's find, searching your whole computer?
Select your Computer in the Finder's sidebar and enter ⌘(cmd)-F
Set the "Kind" selector to "is Application"
This will list any Application currently on your computer.
Regards
Léonie
P.S. You didn't mention it, since it is the obvious place to look first - but have you looked in the Trash?

Pearl 8100 Screen goes blank and Red flashing LED then will not respond.

Hi,
This is my first post here (however I'm on other forums as well) I wanted to see if anyone has come across this.
Briefly here is the low down...
* We have BES 4.1.038 (will be updating soon to 4.5 or 5)
* Platform Version is 2.7.0.66
* Blackberry Version is 4.5.0.52
It's also showing on the BES as having communicated with the unit within the last 10 mins.
any ideas?
Paul Croker

Hello Paul_Poker and welcome to the forums!,
I think in your situation you should look into reloading the software on the device. Just make sure you back up your data before proceeding so you can have a copy of it. Of course the application loader will take of this for you by default.
1) Here is how you back up your device.
2) Here is how you reload the software cleanly on the device (Alternatively, Here is an article on how to use the Web-Based software loader)
3) Here is how you restore your data to the device if it is not backed up automatically
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

When I attach images to an email they show as the image and not an icon. Is there a way to make the attachment an icon?

When I attach images to an email they show as an image and not an icon. Is there a way to have them attached as an icon?
When I send attachments this way some people can't save them. They can see them but not save them.
Any ideas?

They are received as attachments, i.e. icons. What you see is the real image on your disk, and only if small enough to be displayed. Otherwise, they are small icons inserted in the text.
Additionally, when you place an image in the message, you will find an option in the lower right corner, otherwise absent. Use it, if need be.

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

HT4623 why cant i save phone image to photo album...its show save this image to your phone app?,,,,,but no image is save

why cant i save phone image to photo album...its show save this image to your phone app?,,,,,but no image is save

Hi FANMixco,
To be clear, you can see the image from your file system but cannot access it from code?
I'd like to know what could be my bug because I don't understand why I can access from the URL,
-> If you can access the image from URL, you should definitely download it and use it, I'm not quite understand your question now.
I'm not knowledgeable with chmod under Linux, let's say if we give it full accessibility, what will be the result?
Anyway if you can see the image from file system, that already means the upload is succeed, I think you may need get some suggestion from php side to see how can we save the image with a correct permission.
I will move the question to off topic, since the question is on the server side but not client side, which is out of the forum support scope, thanks for your understanding.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password. How do I get the keyboard to appear??

On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password. How do I get the keyboard to appear??

On your iPad, delete the existing account then sign back in with the new ID and password.

HT201274 i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it....

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which ar

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which are current on IOS. Help!

the wifi router could also be blocking
and to really test if the windows firewall is the problem then try turning it off!
if that scare you too much then disable the internet modem / cable modem or the likes while you test
always remove more and more factors when troubleshooting sooner or later it will work and you can narrow down which factor did the job and work on that

One of my movies I bought shows up on my mac in the itunes library but not on the apple tv.

I own about 30 movies on my apple tv and one of my movies I bought shows up on my mac in the itunes library but not on the apple tv. How do I fix this issue and get it to show up on my apple tv?

Two things to check
1st
Settings
Mail, Contacts, Calendars
AccountsHow many accounts are there?
2nd
From Home screen press Mail app
Press the top left button (next to Inbox)
You'll see all the Inboxes for the accounts present
You'll know either way whether one or more accounts has been setup.
SIDE NOTE: Not too sure about MobileMe though, might be integrated with iCloud, not sure.

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that informat

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that information is not sufficiently detailed for me. I have tried several options, but I come now way. Generally it seems that your information is only for the ones who can, not for the people who can´t although it is we who really need to learn. Please give me a step by step (click by click) information on how I can get the ice above the flower and then make the ice partly transparent so the flower is seen underneath. Please send me an e-mail Erik Solbu [email protected]

Open a new document big enough for your image. Then additional open your ice and flower image as well. Copy each and paste it into your blank document. They will be placed on their own separate layers.
Make sure in your layers panel. (Bottom right) the ice is above the flower, by dragging it in place. In that same layers panel click the ice layer to select in and find the opacity meter above. Drag to the left until you get the effect you desire.

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?
Thanks, Rob

First off did you go to System Preferences > Sound > Output > And is the correct output selected?
Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left.

My printer receives and prints my e mail but not the attachments how do I rectify this?

My printer receives and prints my e mail but not the attachments. How do I rectify this?

Hi robgpearce,
Your issue could be related to the file type or a setting with the file. In the help section of ePrintCenter.com, it goes into details on how the HP ePrint service does not support printing webpages via email at this time, HP is currently developing dedicated solutions to support webpage printing from mobile devices. Image files (like jpeg, bmp, tiff, etc) need to be at least 100DPI in order to print via ePrint. PGP encryption, digitally signed documents, macro-enabled spreadsheets and password-protected documents are not supported by ePrint at this time and will not print.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

"Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead!

"Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead! Even my device is not jailbroken.
iTunes recognize this device and giving option for Restore. i go for it and in the continue process WAITING FOR iPHONE /// at this stage it stuck.. and keep serching like for something and in the iPhone APPLE LOGO and Status bar showing..but not processing further.

Shaishel,
Did you resolve this? I am having the same problem! Let me know if you have any suggestions.
Thanks

Captivate 6 showing bleedthrough on images and red flashes in video but not on individual slides

Similar Messages

Maybe you are looking for