Captivate 6 - Updating template does not update project

Hi ,
I am just learning Captivate 6 and have started by creating a theme and then a template. If I create a project file using the template and then go back and make a change to a graphic in the template should it automatically update the project file or do I have to apply the template to the project file again some how? Currently if I make a change to the template it does not update the project file.
Thanks,
Richard

Hi there
Have you ever inserted a document into a copier and made a copy?
If so, this is really the way Captivate templates work. They are designed so you have a consistent look and feel to projects you create from them. So returning back to the copier analogy, once a copy has been made, any changes to the original are NOT reflected in the copy created from the original. But future copies WILL have the changes as the copies were made from the altered original.
Likewise, any changes to the Captivate template are only reflected in the Template as well as Future projects you create using the template. Once created, there is no longer any association with the template.
Cheers... Rick

Similar Messages

Updated Template does not update pages

When I update and save a template it does not ask if I want to update the pages that use that template. I recently down loaded and reinstalled all my Adobe applications. Is there a parameter that has to be tuirned on to fore pages to be updated when the templete is changed?
I am using CS 6.

Have a look here http://forums.adobe.com/thread/953304

I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update etc.

Hi to all,
I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update server because you are not connected to the internet. I did check my wire-less connections and the connection from my PC to wire-less is hundred percent okay. I did search using google.com to confirm and my connections is good. Is there any problem regardings my firewalls or any help will be appreciated. Thanks

Hi bosefire,
Thanks for visiting Apple Support Communities.
You can use the steps in this article to troubleshoot your iTunes connection:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
Jeremy

Updating task does not update project plan

In PWA, the following steps are taken
User updates their time in the task window for a task, than submits this task
The PM approves the time entry from approval center
The PM then opens the project from PWA or Project pro and the time that approved for this task is not showing up in the project plan
This happens in all projects
Project server is not configured with SEM
At queue jobs, Job state is "Skipped For Optimization" for status update jobs
Why is the project not recognizing the time entry?
Thank you.
Sincerely, Murad YAGLI, MBA PMP MCT MCPD:EAD MCITP MCSD .NET MCDBA MCAD, www.murady.com

I am running into this same issue with PWA 2013. I publish a task, have the resource update it via my tasks in PWA, then Open Pro and Check Progress. Pro redirects me to the Approvals page in PWA. I approve the task update, Pro pops several
message windows asking me to wait while the update is processed. The update processiong finishes and...
No progress indicated. No actual work indicated. I have tried opening the Working vs. Published version of the schedule. No difference. It appears to be something specific to this project schedule, as other schedules work just fine.
I have multiple resource assignments on the task in question. I've checked the assignmnet dates, updated task progress in PWA using various methods including work earlier than planned, as planned, work less than planned, anything to get Pro to reflect
the update. Pro rcognizes that there IS an update, indicated in the File / Backstag (Updates pending indicator) but it will not process them.
Personally I think the assignment level date in the DB is not being handled when accessed by PRO. All the data is right if you look in PWA.

Template does not update pages

When I change a menu item in a template (located in the Template folder), and attempt to save it, DW asks if I want to update all pages created w/this template. When I hit OK, all seems well. The log shows all pages have been updated. When I preview, the browser displays a message that xxx.html cannot be found in the Templates folder.
When I restored the entire site from a Time Machine backup, the problem persisted.
Any help would be most appreciated.

Not a templates user, but I am asking why your page is looking for a file with an HTM extension in the Templates folder. As I understand it, only template file(s) with the dwt extension should reside in the Templates folder.
Can we see your code to determine what is calling for that HTM file?

Why does not update my applications to cc?

Why does not update my applications to cc? I have all the programs in cs6, adobe aplication manager and tells me this all updated, , but does not update to cc

CC applications will be available from June.
Please refer : http://www.adobe.com/products/creativecloud/faq.html

When I update template, it does not update other pages

I have created a template .dwt (XHTML) and have some .html pages. The problem is when I update the .dwt (XHTML) pages it does not update the other pages. I have tried everything but the other pages do not update. Could it be something to do with the folder files on the right which aren't selected properly? If so how do I update my source folder so that this will work?

Hi,
When you update a template, do you get dialog to update the other files? Launching those html files, do you see those related to your template?
Please also provide more information like which version of Dreamweaver are you using and on which platform?

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

Changes to BI web templates are not updated

Hello BI Experts,
I need to find a way to advise my portal resource on how to resolve a problem we are experiencing.
When we make a change to a web template, the changes are not updated and it appears that the old version is cached. The only way we can get the new template to show is to bounce EP.
Does anyone have suggestions where we can find the appropriate global settings to set the cache so that EP will retrieve new BI content as it is modified?
Thanks in advance for any help.
Tom

Hi Tom,
If there is some incorrect setting in the portal, the WAD templates does not get saved after the first Save action.
I am not sure of the setting which needs to be done. But I can provide you an alternate solution. If there is no other issue than the templates not getting saved, you can use this.
You can save your changed template using 'Save As' in a different name and then you can delete the original template. Afterwards, you can save this template with the actual name.
I hope this would solve your problem.
Regards,
-Neethu

Shared Variable does not update when typedef is changed

I have a shared variable of type custom control (typedef made up of a cluster). When I chang the typedef, e.g. the name or type of one of the fields in the cluster, and then save it, the shared variable does not update to reflect this change. That is, if I place the shared variable on my block diagram and do a "UNBUNDLE BY NAME" on the output, I see the old fields. I have to go back to the properties of the shared variable, change its data type, apply it, then go back and change it back to my custom control.
Anyone else seen this behaviour? Anyone know how to get the shared variable to update without going through this procedure?
Bill
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

I guess I should have included this information:
LabVIEW 8.2.1 using Project Explorer.
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

Update process does not work on Tabular Form

Hello,
I have 2 tabular forms on one page, which are using manual update processes.
First form is created using wizard, and therefore works perfectly.
The update process is as follows:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Second form is created manually, using the following code:
SELECT apex_item.checkbox (30,
                           '#ROWNUM#',
                           'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                           NULL,
                           'f30_' || '#ROWNUM#'
                          ) delete_checkbox,
       CATALOG_ID,
          apex_item.hidden (31, CATALOG_ID)
       || apex_item.text (32,
                          LANG,
                          80,
                          100,
                          'style="width:100px"',
                          'f32_' || '#ROWNUM#'
       || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
       apex_item.text (34,
                       DESCRIPTION,
                       80,
                       100,
                       'style="width:255px"',
                       'f34_' || '#ROWNUM#'
                      ) DESCRIPTION
FROM V_CATALOGS
UNION ALL
SELECT     apex_item.checkbox
                          (30,
                           TO_NUMBER(9900 + LEVEL),
                           'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                           NULL,
                           'f30_' || TO_NUMBER (9900 + LEVEL)
                          ) delete_checkbox,
           NULL,
              apex_item.hidden (31, NULL)
           || apex_item.text (32,
                              NULL,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || TO_NUMBER (9900 + LEVEL)
           || apex_item.hidden (33, NULL) LANG,
           apex_item.text
                                           (34,
                                            NULL,
                                            80,
                                            100,
                                            'style="width:255px" ' ,
                                            'f34_'
                                            || TO_NUMBER (9900 + LEVEL)
                                           ) DESCRIPTION
      FROM DUAL
     WHERE :P18_TEMP = 'ADD_ROWS1'
CONNECT BY LEVEL <= 1However, the update process does not work on this form.
I created it using the first one as an example, but with the id's of the second form:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Also, both forms are opening in a modal pop-up dialog window.
I use a Dialog Region plug-in for that.
Please advise, what is causing a problem with update?

Sloger,
if this is your tabular form
SELECT apex_item.checkbox (30,
...and this is your update statement
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
Thanks,
Tyson Jouglet

My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

Current platform : Linux
Current firefox version : Firefox 4 beta 12
Issue : does not update to RC 1 using the check for update feature.
Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
Please implement for Linux users too.
Thanks !!

If you can't update then you can download and install the full Firefox 4 RC version.
* http://www.mozilla.com/firefox/all-beta.html

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do?

The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.

If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

HT2513 The date on my dock does not update automatically ? - Ps anybody.

I use MACCBOOK PRO with OS X ver 10.6.8.
I Cal Version 4.0.4 (1395.7)
Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
I would appreciate if someone has a solution.

I solved the problem by uninstalling Glims.

Captivate 6 - Updating template does not update project

Similar Messages

Maybe you are looking for