Captivate 7 - 10.9.2-Mac Air - Unable to stop recording simulation (Trial version)

Stil unable to stop simulation recording with command-return or fn-right arrow key. Updated System Preferences > Security & Privacy > Allow the apps (Adobe Captivate) below to control your computer). Any assistance appreciated. Thank you.

Thanks and that is checked. Still no record buttons. A friend of mine purchased Pro Tools LE and boom we were working using the video examples. I really want to stay with Logic Express but the documentation is poor.
I wish someone could could guide me through adding a singe channel for a microphone so I could record. If I can get that I can go from there. Really getting frustrated.
Any other help would be appreciated. And thanks!

Similar Messages

  • Why my mac air don't support the dock library version 1.0, if this needs the system mac os x 10.5 or higher, and my is os x 10.7.5?

    Why my mac air don't support the dock library version 1.0, if this needs the system mac os x 10.5 or higher, and my is os x 10.7.5?

    For Snow Leopard you require version 2.1.4. However AFAIK you can't buy this from Apple any more: the current version requires Lion 10.7.5 at minimum.
    Amazon are offering v.2.1.1 in the UK - this is not compatible with Snow Leopard either but you should be able to apply an upgrade to 2.1.4. -
    http://support.apple.com/kb/DL913
    I can't guarantee this will work. You may be able to get advice in the Aperture forum.
    Your only other alternative is to upgrade your Mac to Lion 10.7.5 if it us compatible, and buy the current version.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.

  • Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes.  I have downloaded new Extension Manager for CS5. and still c

    Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes.  I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]

    Hi bigd_bud,
    Can you see if the solutions in this post help?
    Re: Adobe Extension Manager crashes on mac 10.8
    Thanks,
    Preran

  • Can't sync my iPad with Mac air. Box says I need latest version of iTunes on iPad and go to support and download. Site says that iPad already has iTunes?

    I am unable to sync my IPad with my new Mac Air. Dialogue box says I need latest version of ITunes and to go to Apple and download. at that site it says that the IPad already has ITunes so there is nothing to download?

    You need to update itunes on the computer not the ipad.

  • Unable to Install Adobe IllustratorCS4 Trial Version

    My computer is an HP Pavilion a6300f
    Running Windows Vista SP1 Home Premium 32-bit
    RAM: 2GB
    Processor: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
    I am unable to install Adobe Illustrator CS4 Trial Version. I receive a Windows Error that stops the installation. Below are the details of the problem information it generated.
    Problem Event Name: APPCRASH
    Application Name: Setup.exe_Adobe Setup
    Application Version: 2.0.133.0
    Application Timestamp: 48a9b01e
    Fault Module Name: agcutils.dll
    Fault Module Version: 1.0.0.1
    Fault Module Timestamp: 48dbd973
    Exception Code: c0000005
    Exception Offset: 000038d7
    OS Version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033
    Additional Information 1: 4b2f
    Additional Information 2: 71e63d375deadcbec910c354d49e5870
    Additional Information 3: 2439
    Additional Information 4: af368e2bdccf20d5b910f6766b93ddcb
    Extra information about the problem
    Bucket ID: 974576742
    I have tried installing it in the simplifed mode, with my firewall AND virus turned off, contacting Adobe, HP and Microsoft for support but nothing works. also tried the Adobe Support Advisor, but I can't even get it to run. If anyone has any help, I would appreciate it.
    You can e-mail me personally at [email protected]
    Thank you.

    Ben,
    I don't have Webshots installed. I have ran my AdAware and Spybot, and my Norton's Antivirus. I've also defragged and ran disk cleanup on my C drive. I've ran the Malicious Software Removal from Microsoft, and ran Disk Error Checking. I've done everything I can think of, and I still can't install either one.
    I was thinking it was Windows Vista, but surely CS4 is compatible with Windows Vista. I thought maybe it might be the Service Pack 1 and thought about uninstalling that update, trying to install them, then reinstall Service Pack 1. What do you think? Think it might help?

  • Adobe Air is not letting me install trial versions of Adobe Products.

    Ok so I am trying to install Adobe After Effects trial version and I keep getting this message "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance." I run a 10.6.8 Mac OS X. Please help me! Thank you!

    Troubleshoot Adobe Download Assistant
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assista nt.html
    As an alternative, see if you have any better luck downloading the file directly from the site linked below:
    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.

  • Unable to Open Project (CS4 - Trial Version)

    After futzing and cleaning up several projects, I am now unable to open them.  I may have changed the Video Preview from Microsoft AVI to I-Frame.  I get the following message when I attempt to open the affected projects:
    The project contained a sequence that could not be opened.  No sequence preview preset file or codec could be associated with this sequence type.
    Is there a way to fix this situation rather than having to start all over from scratch as I've already done for one project?
    Any tips, suggestions or errata would be most welcomed!

    For the learning of PrPro, I highly recommend the Adobe Classroom in a Book for PrPro CS4. It will step one through almost all aspects of NLE work with CS4, from the start of a Project to completion, with most necessary steps along the way.
    Now, for the Canon 5D/7D, I would strongly recommend that you look back in the forum a bit, as there have been several recent discussions on working with that footage effectively. Both Jeff Bellune and PaulineDC contributed to many of those threads. Before you have hours of footage, those threads will give you some workflow ideas.
    As for the VHS tapes, I highly recommend the Grass Valley/Canopus AVCD A-D bridges. Their AVCD-110 is a great unit, that interfaces between the VHS deck and the computer (FireWire here), and does a great job of digitizing the material. You will want to do this capture into DV-AVI Type II files w/ 48KHz 16-bit PCM/WAV audio. The AVCD-300 offers more time base corrections, and can pay the difference with just a few tapes vs the time to do corrections in the NLE. Both are well worth the investment. I would stay very clear of any Dazzle, or Pinnacle capture device (card, or box). Few ever get them to work correctly. There are some A-D cards out there, but their prices are about the same as the Canopus "boxes," and many produce files with OOS (Out Of Sync) issues. Also, some will NOT capture as DV-AVI Type II, so there are other problems, as well.
    Now, if you happen to have a video camera with pass-through capabilities, you can use that to digitize your VHS tapes. However, they are becoming rare, and are almost non-existence in Europe/UK, because of a higher VAT on them. Most models there remove that capability, even if the US version has it. Check first.
    Good luck,
    Hunt

  • Unable to edit track info in iTunes on a Mac Air

    Hello,
    I recently switched from a windows PC to a Mac Air. All my music was organizaed on an external hard drive. I have now imported the music in to my iTunes on my Mac Air. I am unable to edit individual track info when I use "Get Info". I tried to look up for permissions on the particular folder and found that they are all set as "Read Only".
    Any help in this matter is appreciated.

    Go to your Music (media)  folder. The one that holds the actual files.
    Click it and press Cmd+I or right click and select "Get Info"
    In the Info pane, click the lock to change permissions:
    You'll need to tnter your password to make any chnages.
    Set ALL permissions to Read & Write
    Click the Gear and select "Apply to enclosed items..."
    Then click "OK" when asked if you're sure.
    Let it apply to everything and THEN try editing the track oinfo.

  • HT1444 unable to find or open my usb 2 on my mac air

    Unable to view my USB 2 nor open them on my Mac Air. Please can someone advise a solution. Thanks, FRAEMY

    What is the device you call USB 2? Is it a memory stick, an external hard drive or ?
    If it is one of the above, do you have your Finder Preferences set to show external drives on your desktop?

  • I have mac air , i am unable to download latest OS yosemite from App store. Everytime its shows errors . Pls advice how to download

    I have Mac Air , I am trying to download latest OS yosemite from App store . But i am unable to download as its showing error.  Pls advice is there any other options to download . Thanks

    get an error message.
    Care to share what the error says?  My mind reading skillz are nill this early in the morning.

  • I purchased the 30 day subscription of Adobe Pro for my Mac Air and downloaded the app and opened it as instructed. Nothing appears to happen after that and I have been unable to use Adobe Pro thus far.

    I purchased the 30 day subscription of Adobe Pro for my Mac Air and downloaded the app and opened it as instructed. Nothing appears to happen after that and I have been unable to use Adobe Pro thus far.

    I previously downloaded a trial version of Adobe Pro and had used it the last 30 days. Today I just clicked on the link from my purchase confirmation and downloaded some type of installer. Once I clicked on the installer and gave it permission to do whatever it needed to do, it just sort of stalled. I am running Mac OS Yosemite. I thought Yosemitie might be part of the problem because it has given me occasional problems with Word and some other programs. 

  • Unable to connect to Mac Air after Yosemite

    I have been unable to connect to my Mac Air from my network.  I can connect to the network from the Mac but not from the other network units to the Mac.  Any Ideas?
    Thanks,
    H

    Hi henryleicester,
    Welcome to the Apple Support Communities!
    It sounds like you are trying to use the Back to My Mac feature. If you are not able to connect using Back to My Mac please use the troubleshooting steps provided in the attached article. 
    If you have issues using Back to My Mac - Apple Support
    Best regards,
    Joe

  • I just purchased a mac air and am unable to get my entire music library and pictures moved from my iPhone.  I subscribed to match and it wants to delete everything on my iPhone and replace with nothing from the new computer  How do I get my music and pict

    I just purchased a mac air and cannot figure out how to get my pictures from my toshiba windows to the air into iphoto and I also cannot get my library of music and apps to get to the mac air as well.  Each time I try to synch it tells me it will repace my ipad and iphone with the blank library from the new air.  How do I get my music, apps and photos to the air.  I just subscribed to imatch and it charged me and only has 600 of my 2,000 songs!

    You must move your photos and music from your Toshiba to your MBA directly, not using the iPhone. The Migration Assistant app on your Mac will help.

  • Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs with I try to attach a PDF to emails.  Any thoughts?  Apple was unable to help.

    Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs when trying to attach a PDF to emails.  Apple was not able to fix.  Any thoughts?

    The message says:
    Please wait
    If this message is not eventually replaced by the proper contents of your document, your PDF viewer may not be able to display this type of document. 
    Then it goes on to suggest an Reader upgrade, which I already did. 

  • HT3775 my video was recorded on my iPad and played on the Mac Air before it was sent in an e-mail. Why won't it now play on the Mac Air from my sent box? I wanted to check it was sent okay and was unable to open it on the same computer that sent it -  Hel

    My Mac Air won't open a video from my sent box when it was sent from the Mac and recorded on my iPad. It says the format is not supported. Does anyone know why or understand this?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

Maybe you are looking for

  • Error in saving customer information. Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.

    I was trying to create a text alert. I was calling following in jsp email.setContactPointPurpose(myLookUpCode); //say XXMY_SMS_SHIP         PartyManager.createEmail(email, ApiConstant.CONTACT_POINT); Getting following exception: Error in saving custo

  • Build a DLL in LabVIEW & Use the DLL in LabVIEW

    I am trying to build a DLL for the simple vi with LabVIEW and want to use the DLL in LabVIEW. is it impossible? I wrote a vi and it have 2 terminals. one is the input for numeric dbl data type and one another is the output for numeric dbl 1D array da

  • Oracle.jsp.webutil.email.SendMailBean

    Hi, I have the code below in a jsp page, while using the oracle.jsp.webutil.email.SendMailBean. The attacment doesn't seem to be working. I placed the sendmail.properties file in the WEB-INF directory as the documentation suggested. Does anybody have

  • Starting managed servers after rebooting

    Hi: I have been trying to configure my WebLogic environment to start the managed servers in a domain automatically when the machine is rebooted. I have done some testing with Node Manager but, as I understood, Node Manager only restarts a server if i

  • CS3 Won't print or make PDF

    I have a 48 page document I created since upgrading to Windows 7. It will not allow me to print it out or make a PDF of it- I have to do about 8 pages at a time. Preflight indicates no issues, and a similar document created last year will print fine.