Captivate 7 - Created a text-to-speech which I can hear in preview but not when I publish?!

My question says it all. The text-to-screen audio is not showing up in the first slide, but i can hear the rest of them only the first one is missing. What to do?!
Thank you

It's not a good idea to place an audio clip  right on the very first slide. 
You can try moving the audio clip back from the start of the slide by a second or so.  Perhaps it's missing the initialization of the clip because you're trying to play a clip when it hasn't fully loaded as yet.
I usually have a very short blank slide of a second or so as my initial slide, with a button on it that the user has to press to kick off the presentation.  I have some text on this slide warning the user that the presentation has audio and advising them to put on headphones so as not to disturb co-workers.  When they click the button it jumps them to the first content slide.  This short delay strategy usually eliminates any issues with audio not playing as expected.

Similar Messages

  • Captivate 3 shows skin in preview but not when I run after published?

    Captivate 3 shows skin in preview but not when I run after published.  It shows it is included, what's up?

    Is the Skin externalised?  If so, perhaps Flash Global Security is interfering:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
    You could also try NOT externalising the skin.

  • Can u plz tell me I hav problem with I phone 4 which I can hear their call but they can't hear my voice

    Can u plz tell me I hav problem with I phone 4 which I can hear their call but they can't hear my voice

    Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support

  • Text visible in preview but not when uploaded.

    I'm designing a mobile site in Muse.
    The fonts I'm using are from the Museo family through Typkit.
    I've uploaded the site a few times during the design process and had no trouble with text frames or text appearing.
    Yesterday I added a new text frame in one section to link to a phone number and now sections of text are not visible when I upload the site. It is, however visible in the Muse preview!?
    I've tried creating the text boxes from scratch but they still disappear in that particular section of the site.
    Does anyone know why this is!?
    The pale grey line is the text box where the text should appear.

    Hi Michael,
    It works fine at my end, please try clear browser cookies/cache and then check. If possible, check this on a different device and see how that goes.
    - Abhishek Maurya

  • Works in preview but not when published in captivate 8?

    My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?

    Hi Robert,
    as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
    My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
    It might be even necessary to have a look at the fla itself.
    M

  • Dynamic text works in preview but not when uploaded

    Can someone help me resolve as to why my dynamic text works
    in DW8 preview by I get an error after FTPing the page.
    Warning: require_once(/Connections/oneandone.php)
    [function.require-once]: failed to open stream: No such file or
    directory in /homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on
    line 1
    Fatal error: require_once() [function.require]: Failed
    opening required '/Connections/oneandone.php'
    (include_path='.:/usr/local/lib/php5') in
    /homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on line 1
    My testing server is my remote server.
    Thanks

    ah ha sorted - seems to have something to do with relative
    links. Changing site root relative links to document relative links
    has done the trick.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=263&threadid=1154447&hi ghlight_key=y&keyword1=virtual%28%29

  • Is there a text to speech app that can read text books to me?

    Is there a text to speech app that can read text books to me?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    You don't need an app for that text to speech is biult into OS X.
    http://osxdaily.com/2010/03/28/how-to-make-your-mac-talk-text-to-speech/

  • I have brought an ipad2 and have created an apple I'd with which I can download free apps but I am unable to activate my FaceTime using that I'd, do I need to buy something from apple store before that I'd can be used to activate FaceTime

    I have brought an ipad2', I have an apple I'd with which I can download free aps, but it does not work with FaceTime, do I need to purchase some app with my I'd  to activate FaceTime on my iPad with apple id

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Standard text displayed correctly in print preview but not in print

    Hi,
    I have a script in which a standard text has to be printed in the output.
    The standard text contains some german characters.
    These characters are displayed correctly in print preview but not in print.
    The text is maintained in 3 languages DE,EN and Russian.
    The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
    Please suggest something.
    Regards,
    Richa Aggarwal

    Hi Richa,
    Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
    It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters.  If a character does not display then that means it does not exist in the font that you are using.
    Regards,
    Ryan Crosby

  • I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    Hi czigrand,
    Thanks for visiting Apple Support Communities.
    Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
    In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/HT2736
    Best Regards,
    Jeremy

  • I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

    i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
    thanks
    john

    Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
    tt2

  • We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

    We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

    To clarify for anyone who is still having any problems doing this.
    1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone.  If it's already unlocked skip to step 2.  This works and will work even if you update the phone. 
    1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
    2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
    3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
    4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
    Everything should work flawlessly at this point.  If not let me know and I'm happy to help when I can.  I hope this makes doing this very easy for everyone in the future. God Bless -J

  • I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

    I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Maybe you are looking for