Captivate 7 html 5 not publishing properly for iPad

I just switched to Captivate from Articulate because of all the bells and whistles that came with Captivate. I made my first training for a client and it came out nice. I published it in both swf and html 5. The PC finds the swf versions and that works perfectly but the apple products, phone and iPade do not see anything but a black screen. I do not have the scalable HTML chosen (I read it was still buggy) and the presentation is pretty simple, no widgets, a few text animations. But event when I remove the anmations and republish it the presentation does not play nice with apple.
This is an important client, and this is an important project for them. Any one have any ideas? It is imparative that it work on the iPad, Has anyone figured out a work around for this?
I know Adobe must be working on this... Adobe is a wonderful company and it isn't like them to not have a fix quickly... HELP

Hello there,
We haven't heard from any customer the issue you mentioned.
It should work fine.
If possible, could you please share the project (cptx) with us for better investigation.
You can upload the file to https://workspaces.acrobat.com and share the link to [email protected]
Thanks,
Mayank Mahajan

Similar Messages

Captivate project not running properly on iPad

Hello,
I built a project using Captivate 7.0. When I published the project, I checked both the SWF and HTML5 boxes so the tutorial would run on an iPad. However, when I view the tutorial on the iPad, the tutorial does not run properly. The pages do not advance (even though, in Captivate, I have the slides advancing automatically - not on mouse clicks), all of the bullets on a slide do not appear, and the narration stops in the middle of a slide and does not resume.
Do you have any suggestions?
Thank you,
Sarah

Hi Joel,
I removed all bullet animations and re-published the project (I checked the "Force re-publish all the slides"). My tutorial runs on an iPad, without the slides hanging up. It appears removing the bullet annimations solved that issue. Thanks for the suggestion.
However, neither my music introduction on the first slide nor my narration on subsequent slides comes in. I confirmed I do not have "mute" on and that my volume is up. Also, I confirmed the sound works by running the tutorial on my desktop.
Do you have any ideas?
Thanks,
Sarah

Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser

Hi Apple Team,
Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser. When I enter the user name and password the page is keep on loading it never completes the page load. I installed chrome browser on my Ipad and opened my sharepoint windows authentication site it is working fine.
Device : IPad 2
OS : IOS 7.0.6
Thanks,
Baskar

Hi Suhasini,
Please refer below links for your issues. It seems you are having problem with 32 bit and 64 bit component in office and IE.
http://howididit-sharepoint.blogspot.in/2012/04/datasheet-view-not-working.html
http://alpesh.nakars.com/blog/datasheet-view-does-not-work-in-sharepoint-2010/http://support.microsoft.com/kb/2266203
Thanks and Regards, Shailesh B. Davara

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

Play/Pause Button Captivate 3 not working properly

I am using Captivate 3, but my play/pause button is not working properly. I can publish and upload to my LMS, but when I click the pause button the first time the mode changes but the project keeps playing. I have to click two more times and then it works. Can anyone offer any assistance? Thanks so much!

Hello @Unit_27 ,
Welcome to the HP Forums!
Thank you for the information about your keyboard! I'll see what I can do to help
I think it would be a good idea to take apart the keyboard, or some of it, to determine if the keys are obstructed somehow. Some information on the supported method of cleaning the keyboard is mentioned in this document: Cleaning your Notebook PC
If this does not resolve the issue, I would reinstall Windows on the computer. The issue at this point would be software related, to some unknown extent. A recovery will address any software issue. First, make sure you backup everything you need to. Here is some information on how to do this: Backing Up Your Files
Once this is done, it is safe to reinstall the computer. Here is some additional information on how to do this properly: Performing an HP System Recovery
Please let me know if you have any other questions. Thanks and have a great day!
Mario
I worked on behalf of HP.

Search panel not working properly for mysql

JDev 11.1.1.3, MySql 5.1, Windows 7 x64
When you place a search panel with a table using view criteria on a page the search does not function properly.
The search criteria is developed as shown in the VO:
( (UPPER(Patients.card_number) LIKE UPPER( :pCard || '%') ) OR (UPPER(Patients.full_name) LIKE UPPER( :pName || '%') ) )
When you press the search button with a blank form - all records are returned correctly
if you put any data in the search form - it only returns the first record in the table (not related to the criteria).
if you enter a letter in the name field - it returns no records found.
Is there a workaround for this? or has someone patched this already?
Is there a place that you can configure the way the query is built based on the database type?
also if you use the history columns - you get errors saying sysdate is not valid in the query.
I noticed the same issue that has already been raised by others (the search criteria does not show in the panel) but this is merely an inconvenience as it shows when it is run).

Suganth - Umm... there are reasons why this value isn't editable in the design time once you have set it. Ever think about why JDeveloper makes the value read-only? There's also a type map that is non-changeable in the UI; can we hack that too? Unless you know the consequences of changing this (and explain them in your "solution"), you are being irresponsible in posting such a suggestion. If there are no consequences, explain that too, and tell us why the UI prevents you from making this change.
rogerappl - Hack the jpx file at your own risk. There's a very old [url http://www.oracle.com/technology/products/jdev/howtos/10g/MySql/MySQL_and_BC_HowTo.html]article on using ADF Business Components with MySQL that talks about the correct settings for these.
John
Edit.. Roger I see that you've updated the thread - when you created your business components, did you specify SQL92 flavor originally? What type map did you use?
JOhn

Captivate 3 Not Publishing

I know there are many threads on this topic, but I've tried almost every solution that I've seen, and none seem to work. I have a small project (15 slides) with no audio, not even 3,000 KBs. Sometimes it will publish, but with certain projects, Captivate seems to get stuck publishing at the "Writing Tags to stream to SWF" stage.
Things I've tried:
- I thought the problem could have been due to a Flash 10 update, so I uninstalled Flash 10 and reinstalled Flash 9. That didn't work, so I repeated the process with Flash 7 and 8. Nothing.
- I have rebooted the computer 5 different times. (Mainly due to Flash installs and uninstalls.) Doesn't seem to make a difference.
- I removed all unused items.
- I did a Save As.
- I tried publishing to a different location in order to not make the final name as long (ie, my Desktop)
- I am not publishing to a networked location.
- I removed compression. I removed advanced compression, compress compiled SWF file, and Compress Full Motion Recording file. (I tried publishing will all removed, just one removed, two of the three removed, etc. Nothing helped.)
- I cleaned out my temporary internet files and cookies.
- I defragmented my computer.
Nothing has made any difference. Does anyone have any ideas of anything else I could possibly try? I'm at the end of my rope here.
If you have any ideas I would greatly appreciate it! Thank you so much in advance.
Carol

Thank you for the help Erik. Unfortunately, I tried both of these to no avail. It seems to get stuck at the "Writing SWF Tags to Stream" part.
What's even more weird is that I can publish other files, but some I can't. (I work with a lot of different projects). I guess it could possibly be something that's in the file, but I'm not sure what since the only thing that's in there are the background images. Since it's still occurring when I copied the slides from the previous file and I'm still having the same problems, this is the avenue I'm pursuing next, but there doesn't seem to be anything else in there!
If anyone has any other ideas, I'm absolutely open to it! Thanks again!

PO Print preview is not appearing properly for the Bulgarian

Hello Experts,
We are facing an issue on PO output print preview and print.
Where we are expecting the PO output was supposed to print Bulgarian
language.
Bulgarian letters are not appearing properly in PO print preview smart
form
We are able to see the Bulgarian letters in the GUI, when output gets
processed in PO Spool output. And we are not able to see it in the
portal .Its appearing as some junk characters
Could you please provide me any pointers to resolve the issue?
Looking forward your help.
Thank you,
Bharathi.

Hi Ganesh,
Thanks for your reply
Can anybody tell me, is this is because of the PDF issue or output device issue?
If the data is maintained in Bulgarian language, that we can see in portal.
Where when we click on the PO Pint output preview, itu2019s not appearing as some junk characters only
thank you
bharathi

Java Script Code not working properly for visios in sharepoint 2013

Hi all ,
I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part .
In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working .
For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps .
I have checked with the URL its correct , I am not able to find any error also .
Indresh

This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
Regards
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

Multiple Upload not triggering properly for WorkFlows

Hi All,
I have set UploadEvent to some WorkFlow and am testing by uploading documents. When i am upoading single file using upload tab in content Services , WorkFlow process is getting triggered properly. But when i am uplaoding multiple Documents at same time, WorKflow is not functioning properly. WorkFlow was getting trigerred for Single file only (which is first entry in Upload Window ) and its neglecting all other files.
My code is getting all TargetItems by using
WorkflowUtils.getTargetDocuments(session,m_WorkflowId);
and i am getting single document as result. Please let me know what setting i ahve to do to gett all targetItems, i.e, to get all uploaded items from targetDocuemnts function.
Thanks!
Veeraswami K

My mistake.. for UPLOAD in Content Services 10.1.2.3 and Content DB, the uploaded items can actually be seen in the REQUEST_DEFINITIONS NamedValueSet[].
(Item)    48540 REQUEST
requested attributes ...
REQUEST_CREATED=Tue Sep 12 16:49:11 EST 2006 (Calendar)
REQUEST_TYPE=CREATEDOCUMENTREQUEST (String)
REQUEST_TRIGGERED=true (Boolean)
REQUEST_DEFINITIONS (NamedValueSet[])=
    OPT.DESTFOLDER (Item)=
      (Item)    48484 FOLDER                    Test
    OPT.USE_SAVED_DEFINITION (NamedValue[])=
      IFS.ATTRIBUTES.NAME=1.txt (String)
      IFS.DEFINITIONS.IFS.DocumentDefinition.ContentObjectDef (NamedValue[])=
        IFS.CONTENTSPECS.IFS.ContentObjectDefinition.Content (NamedValue[])=
          MIME_TYPE=text/plain (String)
          SIZE=13 (Long)
          ID_URL=http://content1.au.oracle.com:7777/content/dav/?docid=48492 (String)
    OPT.DESTFOLDER (Item)=
      (Item)    48484 FOLDER                    Test
    OPT.USE_SAVED_DEFINITION (NamedValue[])=
      IFS.ATTRIBUTES.NAME=2.txt (String)
      IFS.DEFINITIONS.IFS.DocumentDefinition.ContentObjectDef (NamedValue[])=
        IFS.CONTENTSPECS.IFS.ContentObjectDefinition.Content (NamedValue[])=
          MIME_TYPE=text/plain (String)
          SIZE=13 (Long)
          ID_URL=http://content1.au.oracle.com:7777/content/dav/?docid=48503 (String)
REQUEST_STATUS=1 (Integer)
REQUEST_TARGETS (Item[])=
    (Item)    48484 FOLDER                    Test
REQUEST_RESPONSE=true (Boolean)
REQUEST_RESPONSE_DATE=Tue Sep 12 16:49:12 EST 2006 (Calendar)
REQUEST_FAILURE_CAUSE (NULL)
REQUEST_CAN_CANCEL=false (Boolean)
REQUEST_CAN_DELETE=true (Boolean)
REQUEST_CAN_RESPOND=false (Boolean)
REQUEST_RESPONDERS (NULL)
REQUEST_WORKFLOW (Item)=
    (Item)    48487 WORKFLOW                  Test
REQUEST_WORKFLOW_PARAMETERS (NULL)

Are they serious? Captivate is not creative enough for Creative Cloud?

What are they thinking??? My thoughts are in chaos right now...I was about to buy in to the cloud, even though I'm not able to truly use it yet, so I could continue working and learning, as my trial is ending. Thank God I did a last minute check! WOW. This is wrong on so many levels.
And an extra-special thank you, Adobe, from teachers, many of whom create more each day than some folks do in a lifetime. Guess I'll get that squirrely little subscription for it, wondering all the while when they'll pull it out from under me. I was so hoping to combine it with the other programs bit by bit. Now I'm reading it's incompatible with so much here. Or do I have it wrong somehow?
Adobe, you have some very serious concept issues! Or I'm a bubble-wad and have no clue about what I thought the CC was. Entirely possible.

Wondering if you both can read my thoughts and hear what I'm telling everywhere
Adobe Captivate is the most underestimated application by Adobe itself. In the Adobe Education Community (I'm an Adobe Education Leader, very surprising because normally expertise in Captivate will not get you approved, but I play also with Photoshop, InDesign.... and that helped) they already gave me the nickname of 'Captivate Defender'. Reason is that I have been asking so many annoying questions everywhere like: 'why do you want me to present all the features of Captivate in 20 minutes, and do you not ask that for Photoshop or Dreamweaver?' 'Why do you always only show very basic features of Captivate and in-depth features of the other applications?' 'Why are you not using Captivate for your tutorials' etc...
I discovered Captivate, thanks to an article somewhere, when I was looking for a tool as a teacher to innovate my way of teaching, and as you probably know, became a big fan. But in education, Captivate is almost not known, see that famous 'Education Community'. And leaving it out of the CC that has very interesting prices for students and teachers is indeed IMO a big mistake.
@Kurrykid, I really hope that your fear will never become reality, because where is the alternative that can replace Captivate, inclusive its roundtripping with Photoshop, Audition (and hoping on roundtripping with Illustrator for shapes in the future, and better integration of Edge Animate)? I have been using a lot of tools, but never discovered that 'white blackbird' yet.
Lieve

ITunes LP Bionic not working properly for iTunes

Christina Aguilera's new iTunes LP Bionic does not work properly on iTunes 9.1.1 on my MacBook Pro 13" running Snow Leopard on 64-bit mode.
It does work properly on iTunes on Windows 7 64-bit.
This is how it does not work properly: It does not automatically refresh the display content when I have clicked on a menu item. It only refreshes the display when I move the scroll bars along the display borders, thus invalidating certain region of the display content making the LP to redraw the display. As a result clicking on the menu items, such as Photos, Song List, Credits, and Discography, etc., do not have immediate effect. Needless to say it does not work at all in full screen mode as there is nothing that can be done to invalidate the display and get the LP to redraw.
Again it works properly on iTunes on Windows 7 64-bit so I would say it's an iTunes on Mac issue.

I actually am on a Dell running Windows 7 and am having issues downloading the iTunes LP from the store. It's in my downloads saved, but I'm getting a message saying: "Christina Aguilera Bionic (Deluxe Edition) iTunes LP was not downloaded. You do not have enough access privileges for this operation." Any ideas? It seems as though I'm having the opposite problem as most of you.

Next-Previous Do not work Properly for lengthly dynamic Where Clause

I have created a View object using Expert Query mode
with following Query:
SELECT LIC_SYS_ID,
LIC_NAME,
TERRITORIES,
LANGUAGES,
MEDIA,
SEGMENT_NAME,
CHANNELS,
ACTIVITY_CD,
LS.LIC_SHORT_NAME,
LS.LIC_AKA_NAME
FROM V_LICENSEE_SEARCH LS
ORDER BY LIC_NAME
Then at run time the following Where Clause staments get added by in JSP based on the users criteria
wClause = "(ACTIVITY_CD = '" + activityStatus + "')"
+ " AND " +
"(LIC_NAME like '" + licenseeName + "%' OR " +
" LIC_SHORT_NAME like '" + licenseeName + "%' OR " +
" LIC_AKA_NAME like '" + licenseeName + "%' ) "
In this case the DataScroller does not work properly It DataTable traves only one setp when I click the "Next" link, But if I use the Drop down list of the Scroller its works fine.
Secondly the "Next" "Previous" links of the DataScroller work fine if I use only one stmt in the WhereClause ex: "ACTIVITY_CD LIKE 'A%'".
Can anybody help me with this, Is this a limitation of DataScroller/DataTable/DataSource tags why does it not work??
Please help me its urgent.
Thanks a ton !!

Thx for the reply, I did try your suggestion It did not throw any exception. Here is the log messages after enabling jbo Debug.
[391] Reusing a cached session application module instance
[392] Getting a connection for internal use...
[393] Creating internal connection...
[394] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
wClause : (ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )
[395] Column count: 10
[396] ViewObject : Reusing defined prepared Statement
[397] $$added root$$ id=-2
[398] Application Module failover is enabled
[399] Getting a connection for internal use...
[400] Creating internal connection...
[401] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[402] <AM MomVer="0">
<cd/>
<VO>
<VO Sz="8" St="8" Def="com.sophoi.ipls.media.tv.businessentities.licensee.LicenseeView" Name="licenseeView">
<Wh>
<![CDATA[(ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )]]>
</Wh>
<Or>
<![CDATA[LIC_NAME ASC]]>
</Or>
</VO>
</VO>
</AM>Long postings are being truncated to ~1 kB at this time.

Disk was not ejected properly for no reason?

Hi,
Ok, this is a new one on me. I got a dialog box (twice in about an hour) for no reason saying "The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off."
To eject disk, select it in the Finder.....etc.
I have never had this message before. It suddenly popped up. I never ejected a disk. I did notice that my SSD drive the first time was missiing for no reason. Second time, it was still seen on my desktop.
I rebooted, my screen froze and everything went missing. I did a hard shut down, waited, restarted it and everything came up.
I just recently installed Firefox 21.0 about a half hour before. Everything was fine before that.
Using a July 2010 8 core MacPro, 10.6.8, 32Gig RAM.

Every SSD User (except Apple SSDs which use TRIM built into the System) should be using TRIM Enabler or something like it. It's Free.
http://www.groths.org/trim-enabler/

Captivate 7 html 5 not publishing properly for iPad

Similar Messages

Maybe you are looking for