Captivate 7 installation wizard interrupted message

My installation of Captivate 7 on my Windows 7 64 bit PC has a curious failure message and i tried it 2x.

I hope you didn't pay for this license VERY recently.  Captivate 2 hasn't been the most recent Cp version for around 10 years.

Similar Messages

  • PSE 12 Installation Wizard Interrupted

    I'm having problems installing Adobe Photoshop Elements 12.
    I have already downloaded the bundle. The problem is right at the end of installation wizard. It says status is registering and then immediately does an action rollback.
    The message "The wizard was interrupted before Adobe Photoshop Elements 12 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again."
    I have tried multiple times to delete all files and downloading/installing again.
    If anyone can offer some help that would be greatly appreciated.

    Mzairly did you complete the redemption code process and obtained your serial number?  You can find more details on how to obtain your serial number at Redemption Code Help - http://helpx.adobe.com/x-productkb/global/redemption-code-help.html.

  • The installation was interrupted message after iTunes upgrade

    I would appreciate help with my problem. I'd like to use iTunes but it doesn't work.
    Description of the problem: I was happily using iTunes for more than a year. I received a notice that a new version was available and I upgraded. When the installation was complete I received the following message:
    "The installation was interrupted before iTunes could be completely installed."
    iTunes is not listed in the Programs menu and there are no files at c:\program files\itunes (itunes folder is not there).
    After subsequent downloads and installs, I get the same error. When I do the iTunes standard install, QuickTime is
    available and works well. I went back to the previous version, but it continued to give me the same error. I found very old versions of iTunes on the web and they too had the same problem.
    During the install the iTunes icon briefly appears on my desktop and then disappears. The message box indicating that the installation was interrupted occurs right after that.
    I've tried to describe the problem in quite a bit of detail below to help avoid suggested fixes that have been tried and failed.
    1. I have followed the steps in the KB article. Please see the details of that work below.
    http://docs.info.apple.com/article.html?artnum=93976
    2. I have Administrator access. I have verified that I'm part of both the Adminstrators and SERVICE groups under Impersonate a client after authentication. This process is found in the following doc:
    http://docs.info.apple.com/article.html?artnum=300361
    3. Windows is fully updated through the Windows Update utility. See Windows version info below.
    4. I can install any other application. I use this computer for work and I can install and uninstall any other application
    I try. No other known errors or problems. I've installed other applications that use Microsoft Installer and InstallShield installers without problems.
    5. I tried the Quicktime standalone install and I received the notice that "The installation was interrupted..." Quicktime is now not found on the machine and there is no Quicktime files in the Program Files. During the middle of the installation, I received the following error. Error during QuickTime Standalone (7.1.0.210) install:
    Error 1905.Module c:\program files\QuickTime\qtuiPanelControl.dll failed to unregister. HRESULT -2147220472 Contact your support personnel.
    When I attempt to install iTunes from the standard install, Quicktime installs properly and works. It only fails during the standalone install.
    6. No strange characters in the folder. There is no itunes folder so it contains no folder. The download exe is on my desktop.
    7. Temp Folder emptied and machine restarted (many times)
    8. Uninstall older versions - They are not listed as installed so there is nothing to uninstall. The Windows Clean Up utility does not list them so I can't use that tool to remove them. It appears that iTunes is cleaning itself up when the installation fails so there are no files. There is no iTunes folder at c:\program files\.
    9. iPodService alert is not there so I don't need to delete it.
    10. Redownload software - It has been downloaded many times. Each time I'm careful to permanently delete the previous install exe so it is redownloaded.
    11. AntiVirus software has been disabled. I'm using McAfee VS Enterprise 8.0.0. I have also checked the AV logs to see if it has blocked an install or other event around that time - there is nothing in the AV logs to show any blocked or prevented activity. No activity at all because the software is disabled.
    12. Registry - A search of "itunes" in the Registry Editor finds a lot of references. Too many to list, but most are in keys that apply to file types.
    13. I have downloaded and attempted to install the Windows Installer 3.0 package from the following URL:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=5FBC5470-B259-4733-A914 -A956122E08E8&displaylang=en&Hash=9PV3FS4
    I'm told by a box during the install that the version I have installed is newer than the one on the website and there is no need to install it.
    14. The version of iTunes that I'm trying to install right now is 6.0.4.2. I've had this problem for at least three months so I've been trying many versions before its release.
    15. Other than the mentioned AV program, I don't have a third-party firewall, anti-spyware or monitoring program installed.
    System:
    IBM ThinkPad T42
    Windows XP Pro
    1 GB RAM
    McAfee VirusScan Enterprise 8.0.0
    Microsoft Windows XP Professional
    Version: 5.1.2600
    Service Pack: 2.0
    Location: C:\WINDOWS
    Hot Fix: KB913446
    IBM T42   Windows XP Pro  

    It is a miracle - After about 9 months without itunes, the new release installed on my machine today and appears to be working.
    7.0.0.70 is the verion I just installed.
    Another note to add to this now resolved issue. I bought an AirPort Express and I was not able to install the Admin software on the CD. I received the same error as I received with iTunes and Quicktime. This leads me to believe that this problem is in the registry or some other installer issue that is specific to Apple installations. I will have to go home and try to re-install that software. Maybe the new iTunes version cleared up the problem.

  • Installation was interrupted message for a routine upgrade

    Right after "Publishing product information":
    "The iTunes for Windows installer has completed.
    The installation was interrupted before iTunes could be completely installed.
    The System has not been modified. To install this program at a later time, run the installation again.
    Click Finish to exit the wizard. "
    Describes the problem, but (1) this is a routine upgrade from the previous version (I've never had problems before), (2) I disabled all virus protection etc. (3) downloaded an other copy to make sure not corrupted
    Dell   Windows XP Pro  

    hmmmmmm.
    okay, let's try enlisting some additional technical help.
    let's try getting a installer log to someone who can interpret installer logs.
    Start menu -> Run... In the text field of the dialog that comes up, type in "cmd" and hit return.
    In the command prompt dialog that comes up, find the iTunes installer on your desktop and drag it to this window. Then on the same line type in a space and then the following:
    /Verbose"c:\log.txt" /V"ENABLE_QTLOGGING=TRUE"
    There is no space between the e in Verbose and the double quote ("). There is no space between the V"Enable...
    Hit return.
    The installer will create two log files:
    C:\log.txt and C:\qt.log
    Find those files and send them to this email address Put the URL to this discussion thread into the email, so that the person who gets it has some context. Let them know the version of itunes you’re trying to install, too … in general, give as much info as you can.

  • Firefox will not install on my laptop using windows 7. I keep getting a message saying that the installation was interrupted

    Every time I try to install firefox on my laptop i get a message saying that the installation was interrupted. I am using windows 7.

    Oh my god, thank you so much! Ive been working on this for hours and with your help it was done in five minutes. Thanks again!

  • Cannot install Itunes update getting error installation  was interrupted

    today i tried to upgrade to itunes6.04 during the installation i got the following error message. The itunes wizard has completed. The installation was interrupted before I tunes could be completly insatlled. he system has not been modified. to install the program at a later time,run the installation again. Click finish to exit wizard.
    I have tried add remove programs, itunes is gone so is quick time.
    I hae emptied all my temp files, along with doing a system restore to a prior date.
    I have also tried to install my initial software cd and ge the same error message.
    Also I am using norton system works which was turned off all during this time.
    what can i do to get up and running again so i can use my ipod.
    BEFORE I TRIED TO UPDATE ITUNES EVERYTHING WAS RUNNING FINE WITH MY IPOD/ITUNES
    dell 9100   Windows XP   3.02 gig, 512 ramm

    today i tried to upgrade to itunes6.04 during the
    installation i got the following error message. The
    itunes wizard has completed. The installation was
    interrupted before I tunes could be completly
    insatlled. he system has not been modified. to
    install the program at a later time,run the
    installation again. Click finish to exit wizard.
    I have tried add remove programs, itunes is gone so
    is quick time.
    I hae emptied all my temp files, along with doing a
    system restore to a prior date.
    I have also tried to install my initial software cd
    and ge the same error message.
    Also I am using norton system works which was turned
    off all during this time.
    what can i do to get up and running again so i can
    use my ipod.
    BEFORE I TRIED TO UPDATE ITUNES EVERYTHING WAS
    RUNNING FINE WITH MY IPOD/ITUNES
    dell 9100   Windows XP  
    3.02 gig, 512 ramm
    I have the same problem there seems to be no solution on the discussion board. So what next?

  • Error 507 after software installation was interrupted

    i was trying to update  OS for my bb8520 when i lost internet connection on my laptop so software installation got interrupted, i tried to reload the software but pc wouldnt recognized the bb, it says hardware not recognized, i took it to 2 technicians to try to get it fix but they both said since software installation was interrupted phone is completely dead and its only good to sell it by pieces, is this true? please help, can this be fixed? and how?? 

    ughhh..no, it can be fixed.
    If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem reading Captivate 6 installation DVD on Vista

    I just received my copy of Captivate 6 on a DVD for Windows. I would like to install Captivate 6 on a PC running Windows Vista 64 bit service pack 2.
    My DVD drive cannot open the installation DVD to even start the installation. Is there a way I can install Captivate 6 on my system?
    PS-I already paid for this copy of Captivate 6.

    Well, this is a mystery. After asking the question, I downloaded and installed the trial version and then used the product code from the purchased version to obtain a serial number. This worked.
    I also tried out the install DVD on another computer with Windows 7, and it started to autorun as expected.
    I then came back to my Vista PC, inserted an old Acrobat installation DVD, which started to autorun as expected. I removed the Acrobat installation DVD and inserted the new Captivate 6 installation DVD, and magically it started to autorun this time.
    It must have been my optical drive, but I don't know why it read the DVD this time and not the others.  (Never got any error messages. The computer just didn't read any data on the drive and was still looking for media to be inserted. Maybe something is a little misaligned??)
    At any rate, problem solved and the software is installed and registered. Thanks for your response.

  • "The installation was interrupted before iTunes could be installed"

    For several months now I have tried unsuccessfully to install iTunes on my laptop computer. The older versions worked, with several bugs, but they worked nonetheless. After installing EITHER iTunes or QuickTime, I get the messages:
    "The installation was interrupted before iTunes could be installed" or "The installation was interrupted before QuickTime could be installed". The result is that NOTHING has been installed on my harddrive. I have read over many previous tech support posts on this forum and have tried many of the proposed solutions to other peoples' problems.
    This isn't necessarily an error message because it doesn't 'popup' after installation, but rather is on the iTunes+QuickTime screen that begins by saying "the iTunes for Windows installer has completed". Immediately underneath is where I get "The installation was interrupted before iTunes could be installed". Followed by "the system has not been modified. To install this program at a later time, run the installation again." (no ****?). My only option at this point is to click "Finish", which takes me back to the desktop with no sign of iTunes or anything.

    Just noticed the post below mine solved this problem. Now additional problems have arisen...

  • Adobe Captivate Trial Installation Error

    The trial downloaded fine but when installing Captivate I received the following messages during installation.  In Windows, windows creates a folder named My Documents.  However it appears Adobe Captivate is looking for a folder just called Documents which doesn't exist.  If I look into "C:\Users\Tom Lansburg\My Documents\My Adobe Captivate Projects\Layouts\6.0\en_us", Adobe had already created and placed the files it is looking for here.  Windows will not allow me to create a folder called Documents without first merging what the system folder contents of My Documents has in it.  I was reluctant to do this since there maybe links to files in these folders that won't get remapped when I do this. 

    [Moved the discussion to Captivate Forum]

  • "Add Operating System Installer Wizard" Throws Error When Adding OS's

    Good Afternoon All - 
    Okay - I just installed SCCM 2012 in our production environment - whoo hoo!
    Going through the initial setup and configuration, I had a few errors that I had to take care of, but was able to figure out what caused them OR just uninstall / reinstall them fixed it.  I've got a new issue I can't figure out, though.
    On my SCCM 2012 Primary Site Server, I created a folder named Images and shared it to my SCCMAdmin account (full) and SCCM Admin group (full).  Inside of it, I created sub folders for each of the OS's that I want to have installers for.  For now,
    I am working with Windows 7 Professional SP1 x64.
    In the console (signed in as SCCMAdmin), I go to Software library, then Add Operating System Installer Wizard.  I type in the UNC path going to shared folder, then sub folder holding the ISO file and click Next.  I then get an error saying
    "The specified path does not contain a valid operating system or you do not have permission to access it.  Specify a valid path."
    Perhaps I'm doing something wrong, but here's what I've tried to fix it so far...
    - Tried pointing it to a folder with the ISO's contents extracted as well as to the Sources folder
    - Downloaded the ISO from TechNet so that I know it was fresh - nogo
    - Tried adding a Windows 8 ISO I had laying around - nogo
    - Checked folder share permissions as well as security ones.  I even gave Everyone full access - nogo
    - Checked SCCM component and site status - green across the board.
    Any ideas? - Thanks!
    Ben K.

    Sorry to bring up a relatively old post, but wanted to relay my experience with this same problem.  In my case, I knew all permissions were correct, but I received the same error message.  Turns out the problem was that I had only copied the
    install.wim file to my Images directory.  I then directed SCCM to the Images directory and got the error message.  The reason for the error was that SCCM is looking for the folder structure that is on the DVD, namely, the "sources" directory. 
    By the time I figured this out, I had already copied the entire "sources" directory to the root of my Images directory.  I moved all of these files under the Images\Sources directory and went ahead and copied the rest of the DVD to the Images directory. 
    After doing that, I was able to complete the wizard as expected.  Hope that helps someone to not have to waste the same 2 hours that I just did.  :)

  • Hardware installation wizard problem on 6280

    Can somebody please help me? I'm trying to install the PC suite and cable drivers (both genuine nokia) on my PC and everytime a box pops up telling me I must close the 'hardware installation wizard' before they will install. I'm haven't installed anything on my PC for quite a while, but surely I need the installation wizard to install the software/hardware?

    What is your system (Windows Xp or?), Where do you open this wizard ?
    Why don't you just download the Nokia Pc Suite from www.nokia.com, doubleclick the package and let Pc Suite install itself ? YOu don't need separate drivers, all is included in PC Suite
    Message Edited by manta on 27-Jun-2006
    06:31 PM
    Message Edited by manta on 27-Jun-2006
    06:33 PM
    Message Edited by manta on 27-Jun-2006
    06:34 PM

  • I'm downloading in English but the Installation Wizard is in German

    I'm trying to downlaod Firefox from the US Mozilla website. The downlaod "Run" is in English, but the Installation Wizard is in German. Is there a way to change this. I installed a previous time with the German installation wizard but then the toolbar and any messages are in German.

    I've had a remote scan and an in-store scan, it's been determined that my hard drive is 'dying'. So to do anything at all, I've switched to safe mode. It's allowed me to do a couple of graphics projects and access my programs. In the recent past I managed to open a psd file and then it got hung up and I couldn't even click on layers. Then I could not even open folders, and finally the internet was not opening up. My provider - Comcast - sent a signal to allow me internet access also in safe mode, so now I don't need to go to the library to answer emails! I can work in my programs, it's just a temporary annoyance. And yes, the monitor is a fairly new 27". Thanks, Peter and Bob, guess I'll just wait it out... should be up and running by next Monday or Tuesday.

  • Grid Installer Wizard step 9 of 10 - execute script root.sh problem

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6)
    and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    The Virtual Disk for each VM is 20 GB whose raw device is /dev/sda (partition /dev/sda1 is the same size).
    In order to install Grid Infrastructure, I add 5 Hard Disks into the first VM rac1 and 10GB for each Hard Disk.
    Then create 5 ASM disks respectively as a Disk Group. Let me describe them as follows:
    OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
    Corresponding raw devices: /dev/sdb (sdc sdd sde sdf)
    Corresponding partition: /dev/sdb1 (sdc1 sdd1 sde1 sdf1)
    Corresponding ASM disk: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
    When I run Grid installer step 5 of 8, I select all of 5 ASMDISK as ASM disk group in the Wizard.
    The clusterware files are supposed to be stored in the ASM disk group.
    The 2 VMs rac1 and rac2 should use the same ASM disk group.
    By here, I don't do anything regarding ASM disk group in the second VM rac2.
    When run the Grid Installer step 9 of 10, execute script root.sh in the 2 VMs rac1 and rac2. The script root.sh runs in the first VM rac1 successfully. But when the script root.sh runs in the second VM rac2, the error message comes up as following:
    ORA-15018: disk group cannot be created.
    ORA-15031: disk specification 'ORCL:ASMDISK5' matches no disks.
    ORA-15031: disk specification 'ORCL:ASMDISK4' matches no disks.
    ORA-15031: disk specification 'ORCL:ASMDISK3' matches no disks.
    ORA-15031: disk specification 'ORCL:ASMDISK2' matches no disks.
    ORA-15031: disk specification 'ORCL:ASMDISK1' matches no disks.
    Configuration of ASM failed.
    Did not successfully configure and start ASM.
    Initial cluster configuration failed.
    From the above error message, it seems that we need to connect the second VM rac2 with the ASM disk group created in rac1 so that 2 VMs use the same set of the ASM disks.
    But I don't see anything about doing ASM disk group in the second VM rac2 in the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html.
    My question is:
    Do any folk understand how to solve ASM disks issue in the second VM rac2 when run the script root.sh in rac2 on step 9 of 10 in Installer Wizard ?
    Thanks.

    Hi,
    One of mandatory requirement for RAC is shared storage. Check if you have shared storage across all nodes.
    Run oracleasm listdisk on node2 to see if it can see the same disks on node 1. Otherwise you didn't follow that tutorial correctly
    Cheers

  • Camera Raw 6.7 Update for Mac OS 10.10:  Installation Failed error message.

    Camera Raw 6.7 Update for Mac:  Installation Failed error message.  Update downloaded directly from Adobe website.  Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished.  Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

Maybe you are looking for