Captivate 7 Stuck Loading after installing Microsoft Office 2013

Before the problem started, I initially had Adobe Captivate 5 (not 7) and have been working fine until I installed Microsoft Office 2013. As I tried to start Captivate 5, it gets stuck on the loading page—the welcome screen never shows up. After I checked this blog on the forum, which is blaming 3rd party fonts that may cause this issue to happen—I never installed any 3rd party fonts—I wasn’t sure if Office 2013 come with additional fonts that are not compatible with Captivate 5. So I removed Captivate 5 and installed the trail version of Captivate 7 (32 bit) thinking that Captivate 7 will be okay with any additional fonts that come with Microsoft Office 2013. Still having the same issue—can’t get the welcome screen—stuck on the loading screen. Regardless, whether I try to start the software or try to open an existing Captivate file by double clicking.
As per another blog on the forum, I also tried removing/renaming Captivate folder located in C:\Users\MYUSERID\AppData\Local\Adobe but that didn’t help either. Now I have completely removed Captivate 5 folder from the directly as I have installed Captivate 7—still stuck with the same problem.
I am running Window 7 Professional (32 bit), have the latest version of Java SE 7 Update 25, downloaded latest AIR update and of course every time removed any software, I did restart the computer to update the registration keys before installing a newer version of a software.
You help and advice will be greatly appreciated! Many thanks!
Regards,

Hello Parth.
Many thanks for your help! It worked!
After deleting every font I could (out of 820 fonts, ended up deleting 687 fonts--only 133 remined that were proected-system fonts) I am successfully able to launch Captivate 7. I guess Microsoft Office 2013 did install some fonts that conflicted with Captivate 7 (even version 5). By the way, Myriad Pro, my favorite font when it comes to Captivate, is also system-protected that I couldn't delete. I now just have to work on Part B, and slowly reinstore the deleted fonts in small batches to keep Captivate working.
Thank you again for the tip ... much appreicated!
Regards,
Farooq

Similar Messages

Firefox Not Responding after Installing Microsoft Office 10

After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

Trouble installing microsoft office 2013

When i try to install Microsoft Office Professional Plus 2013 32 bit i get the message "Please Wait, were sorry. It looks like another installation is running. Please wait until it's finished and try installing Office again" although i
do not have any other installations running. And once i press close to that Microsoft Bootstrapper "stops working" I have windows 7. Please help, thankyou!

Hi,
First, try to reboot your computer to check the issue, if the issue still occurs, then try the following methods.
Note: Modifying REGISTRY settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of REGISTRY settings can be solved. Modifications
of these settings are at your own risk.
I need you to check in the registry for a certain subkey that might be there. The subkey we are looking for is called “InProgress”
From your desktop click the Start
button
In the search field type “regedit” (do not hit enter, “regedit.exe” will appear in the start menu)
Right-click “regedit.exe” and select “Run as administrator”
(If you receive the User Account Control message, select continue or allow to proceed)
You should now be the Registry Editor.
Now we are going to browse to the following subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress
Expand HKEY_LOCAL_MACHINE
Expand SOFTWARE
Expand Microsoft
Expand Windows
Expand CurrentVersion
Expand Installer
Under the “Installer” key do you see the subkey “Inprogress”, if so, right-click the “Inprogress” subkey and select delete.
After you delete the “Inprogress” subkey, close the Registry Editor and any other window that you may have open and restart your computer.
Jaynet Zhang
TechNet Community Support

How do I install Microsoft Office 2013 on my Mac via my Windows 8 Parallels Desktop 8 partition?

I recently bought a copy of Windows 8, Microsoft Office 2013 and Parallels Desktop 8 for Mac.
I wanted to install a Windows partition on my Mac so that I could run MS Office 2013 on a virtual machine.
I set up the VM, and everything was looking fine and worked smoothly.
Then, when I inserted the MS Office 2013 disk into the CD drive, nothing happened!
I tried to install MS Office 2013 but to no avail.
Does anyone know how to overcome this issue?
Thanks.

In the Configure menu item, under Virtual Machine, configure the CD/DVD to be recognized by your SuperDrive:
The only drawback is that you have to quit Parallels for the drive to be recognized by the Mac again.
I just purchased the Office 365 subscription for both Office 2011 on my Mac and Office 2013 on my Windows 7 side - sure makes life simpler, and less expensive.
Clinton

Error in pc editor after installing microsoft windows 2013

After we have installed microsoft windows 2013 attached error message is appearing in the po, header text. What action can be taken to solve this? Thanks in Advance.

Hi,
you must upgrade the SAPGUI version at last level the patch available.
Regards
Luix

Unable to install MS Office Proofing tools 2013 SP1 even after installing MS Office 2013

Hi All,
When I run the "proofsp1.exe" manually by double clicking on it, I get the below error message. Proofing tools has already been installed and I am trying to install Proofing tools Service Pack1.
"The expected version of the product was not found on the system."
MS Office 2013 is already installed in the machine.
Few more details about the issue:
Which language are you trying to install the proofing tools for?
I am trying to install on English for testing purpose. I am facing the same issue on other languages as well.
What is the language of office you have installed?
English
Are you working on 32 bit or 64 bit version of Office?
32-bit
At last I was able to install "proofsp1.exe" using the below command line with User Interface.
"proofsp1.exe" "PACKAGE.BYPASS.DETECTION.CHECK=1"
But not able to install it silently using the below command line
"proofsp1.exe" "PACKAGE.BYPASS.DETECTION.CHECK=1" "/quiet /norestart"
Please advice how to install "proofsp1.exe" silently or without the
"PACKAGE.BYPASS.DETECTION.CHECK=1" parameter.
Thanks in advance.

Hi George,
It does not accept "PACKAGE.BYPASS.DETECTION.CHECK=1".
It throws the help window with all the switches on using this command line
proofsp1.exe
PACKAGE.BYPASS.DETECTION.CHECK=1 /quiet /norestart
Can anyone please tell, why am I getting the below error message when MS Office 2013 and Proofing tools has already been installed.? I am trying to install MS Office proofing Tools 2013 SP1
"The expected version of the product was not found on the system."
Thanks.

How do I install acrobat addon into microsoft office 2013

I've just installed Microsoft office 2013 and I can't figure out how to install the acrobat add on so I can create pdf files from within word, powerpoint and excel. This is very frustrating.
Brad

You have to have an updates Acrobat XI. Previous versions of Acrobat do not work with OFFICE 2013. In that case, you will have to print to the Adobe PDF printer. We have no idea what version of Acrobat you are running and that is probably the issue.

Microsoft Office 2013 has stopped working

Please can you help? My PC is running Windows 8 Professional Plus 64 bit. I downloaded and installed Microsoft Office 2013 32 bit and it worked perfectly until I changed my graphics card to an Asus Radeon HD6450 Silent. Since then, all
the programmes, Outlook, Word, Excel etc. have stopped working. I have Microsoft Office 2010 32 bit installed as well and that is still working fine.
I have tried removing COM Add-ins and have also repaired MS Office 2013 but neither have worked. I have read the KB article but the driver dlumd32.dll does not appear to be installed on my machine. All the applications will run in Safe Mode.
I have uninstalled Office 2013 and re-installed it but at the end of the installation I got the ‘Microsoft Office has stopped working’ message.
The event logs for each say:
   EventData
           outlook.exe
           15.0.4433.1506
           508fa723
           atidxx32.dll
           8.17.10.453
           5064ffd8
           c0000005
           003c376c
           e7c
           01ce1cfcf2eb3b12
           C:\Program Files\Microsoft Office 15\root\office15\outlook.exe
           C:\WINDOWS\SYSTEM32\atidxx32.dll
           34205235-88f0-11e2-be82-002354da9f87
            powerpnt.exe
           15.0.4433.1506
           508fa697
           KERNELBASE.dll
           6.2.9200.16451
           50988950
           e0000003
           00014b32
           1414
           01ce1e86a1ccb5b6
           C:\Program Files\Microsoft Office 15\root\office15\powerpnt.exe
           C:\WINDOWS\SYSTEM32\KERNELBASE.dll
           e773a04c-8a79-11e2-be83-002354da9f87
onenote.exe
           15.0.4433.1507
           509dd98c
           unknown
           0.0.0.0
           00000000
           c0000005
           0166008c
           de8
           01ce1e86907c6cb7
           C:\Program Files\Microsoft Office 15\root\office15\onenote.exe
           unknown
           d162f65f-8a79-11e2-be83-002354da9f87
outlook.exe
           15.0.4433.1506
           508fa723
           atidxx32.dll
           8.17.10.453
           5064ffd8
           c0000005
           003c376c
           b40
           01ce1e867fe36df0
           C:\Program Files\Microsoft Office 15\root\office15\outlook.exe
           C:\WINDOWS\SYSTEM32\atidxx32.dll
           bf7330ec-8a79-11e2-be83-002354da9f87
   IEXPLORE.EXE
           10.0.9200.16482
           50cfc9bf
           atidxx32.dll
           8.17.10.453
           5064ffd8
           c0000005
           000135b4
           9b8
           01ce19d63a5e4f4c
           C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
           C:\WINDOWS\SYSTEM32\atidxx32.dll
           7b558297-85c9-11e2-be7e-002354da9f87

Hi Lesley,
By checking the event log you provided, it seems this problem also occurs with Internet Explorer, isn't it?
And most of them are related to the atidxx32.dll file, I'd suggest we remove the graphics driver and see if this problem will still occur, if no, try to install any ohter version of graphics driver to see if this problem will still occur.
Max Meng
TechNet Community Support

Should I have installed Microsoft Office 2010 Filter Pack 64 bit with Ex 2013 SP1?

I have installed Exchange 2013 SP1 on a 2012R2 server, and all went well (I am at early stages of migration).
Following the pre-reqs listed here: https://technet.microsoft.com/en-us/library/bb691354%28v=exchg.150%29.aspx#WS2012
I installed Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit only.
Since then I have seen other articles suggesting that I install:
Microsoft Office 2010 Filter Pack 64 bit
Microsoft Office 2010 Filter Pack SP1 64 bit
Given I didn't notice any errors in the install, do I need to install those filter packs or is that outdated advice?
regards
Roga

Thanks for taking the time to post Ed
I did a bit more research and it appears that there is more than one view on this.
E.G. this blog
Why Exchange 2013 doesn’t need the Microsoft Office Filter Pack says:
"Exchange 2013 swaps MSSearch for the Search Foundation, a component shared with SharePoint 2013. The Search Foundation has no need of the Office Filter Pack because it includes its own filters. Unfortunately, until SP1 came along,
the Exchange 2013 Setup program overlooked this fact and stated that the Office Filter Pack was a prerequisite. Setup would install if the Office Filter Pack was missing, but who’s going to ignore a warning issued by Setup. In any case, that warning seems
to have finally been suppressed."
This blog
Planning and migrating a small organization from Exchange 2007 to 2013 (Part 10) has:
"After choosing the relevant setting needed to begin installation, the Exchange 2013 setup program will now perform readiness checks. Assuming these complete successfully, we'll expect to see just one warning.
This warning relates to the lack of the Office 2010 Filter Packs, which are not required for installation, and are only required to create Transport Rules for OneNote or Publisher files"
And this one
Exchange Server 2013 FAQ: Is the Office Filter Pack Required?
"The Exchange 2013 pre-requisites page on
TechNet, at the time of this writing, does include the Office Filter Packs as a step in the preparation of a server for Exchange 2013. What it doesn’t make clear is that they are not required.
The new Exchange Search already has support for indexing/searching Office file types, as well as a series of other file types including some third party formats such as PDF. You can see a full list
here.
So should you install the Office Filter Pack? If you want to stop seeing that warning message, then yes. If you want to take the approach of only installing required software on your servers, then no. Consider also that installing it means potentially having
to update it later on if there is a bug fix or a security issue."
The final para above is the approach that I have now taken, but if someone can give me a good reason to install office 2010 filter packs on Ex 2013 sp1 I'll revise my view
regards
roga

SharePoint Workspace 2010 still installed after upgrade to Office 2013

I'm working on a deployment of Office 2013 in a corporate environment. Using the OCT, I've customized a package which is working well on machines that don't have previous version of Office installed. However, many of the existing machines currently
have Office 2010. After executing the Office 2013 package, we're noticing that while the upgrade works, SharePoint Workspace 2010 and the Office 2010 Tools still exist in the Start -> Programs menu. I also see Office 2010 in Add/Remove programs
(along with the new Office 2013). The OCT is specifically set to uninstall previous editions of Office during the upgrade (which is the default behavior).
I'll seen a couple of other posts like this on the forum, but unfortunately no answers. How can I *completely* uninstall Office 2010 (including SharePoint Workspace 2010 and the Office 2010 tools) during the upgrade to Office 2013? This
corporation doesn't need SharePoint Workspace 2010; my guess is that it was included by default with the Office 2010 package that they rolled out in the past.
Thanks!

Hi,
By default, the uninstall option in Office Customization Tool (OCT) will not remove SharePoint Workspace 2010 as SharePoint Workspace is no longer include in Office 2013.
Try to create a separate Office 2010 .msp file, set Microsoft SharePoint Workspace and Office Tools to "Not Available" and deploy it
prior to the installation of Office 2013.
Or you can do an Uninstall upgrade. Basically, use the /uninstall [ProductID] command-line option to uninstall Office 2010 from the user's computer first and then after that is finished, install Office 2013.
Here is a great example of how to perform an uninstall-upgrade for enterprise deployments :
http://blogs.technet.com/b/odsupport/archive/2011/04/06/how-to-perform-an-uninstall-upgrade-to-office-2010.aspx (Note, the steps are wrriten for Office 2010, but it holds good for Office 2013.)
More reference:
http://technet.microsoft.com/en-us/library/cc178956.aspx#BKMK_uninstall
http://technet.microsoft.com/en-us/library/ff602181.aspx
Hope this helps.
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Microsoft Office 2013 (Word,excel) Still appear as "Standard" after migrate in ProPlus 365

Hi,
I'm planning a mass deployment of Microsoft Office 365 ProPlus with SCCM 2012.
I made my application, and added a supersedence of Microsoft Office 2013.
So when I deploy ProPlus, It first uninstall Office 2013, then reboot, then install Office ProPlus 365
My problem is that when it install Office ProPlus product that I had on Office 2013 and I go in Account tab, I still see "Microsoft Office Standard 2013"
When I see the others product, I see Microsoft Office ProPlus.
I'm sure that Standard is uninstalled first, I can also see in Add/Remove programs that there is no Standard version.
Is that just a bug, or some of my product hasn't migrate on Office 365 Proplus ?
Thanks ! :)

@Don, I reboot the client computer after uninstalling Office 2013. Nothing have changed.
@Aravindhan, I'm lauching Office from the start menu. I already tried to just uninstall Office and see what's happen. Office uninstalling correctly. But When I install ProPlus, I can see "Office Standard" in account tab.. (and Standard doesn't
appear in Add/remove programs)
Maybe check c:\windows\temp\SetupExe(YYYYMMDDHHMMxxxxx).log
This is the Office (MSI) setup logfile, to see if there were any uninstallation errors?
Are there any standalone Office products installed previously, e.g. SharePointDesigner or similar ?
It might be necessary to use OFFSCRUB.VBS (from the Office removal Fixit) to clean that up?
http://blogs.technet.com/b/odsupport/archive/2011/04/08/how-to-obtain-and-use-offscrub-to-automate-the-uninstallation-of-office-products.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to Install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits

I am with problems to have acess to the link: http://www.microsoft.com/en-us/download/details.aspx?id=12187
Why?
I want do install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits. How can I do it?
Thanks.

Hello Carla Sofia,
Visual Studio installation do not depends on Microsoft Office 2013. They do not have relationship here. I think your problem is that you cannot find the link to install Visual Studio 2010.
In order to know why, please see here:
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?sort=PN&alpha=Visual%20Studio%202010&Filter=FilterNO
The mainstream support for Visual Studio 2010 is already expired and that is why you cannot open any link about Visual Studio 2010 Setup.(I cannot verify whether that link is about VS2010 Setup.)
I think you need to think about the following:
1. If you need Visual Studio 2010, you may have to consider some other channels. For example, official site you can try use MSDN Subscription. For non-official site. Sorry I cannot provide any place for you
2. You can use other latest version of Visual Studio, for example, we have Visual Studio 2012, 2013, 2015 for you to use. You can also use Visual Studio Express 2010 version. It is still available for download.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
If you want to run Mac and Windows at the same time, you could do what I did:
Get Parallels
Install Windows as VM on top of Parallels
Install Office in Windows
Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Microsoft Office 2013 is not working on Windows 8

I downloaded Microsoft office 2 days ago. Since then Window 8.1 update has basically attempted to ruin my life. Since I attempted to download the update (which will not download properly no matter how many times I try) Microsoft office will not
open on my computer. All the apps are still there. But they simply will not open. I have tried going to the start and typing the stuff in safe mode, still nothing happens! Can someone please help me? I am beyond frustrated with my brand new computer,
Windows 8.1, Microsoft, and everything about this situation.

Hi,
Did only the Office suits not open or all the apps after you upgrading to Windows 8.1? Please do the following tests to narrow down the issue:
First test:
If only the Office suits could not be opened, please go to Office 2013 installed folder, such as C:\Program Files (x86)\Microsoft Office\Office15 and double click apps to open them.
If all the apps could not be opened, please press win+R and copy the path:
%windir%\explorer.exe shell:::{4234d49b-0245-4df3-b780-3893943456e1} to Windows 8 app folder double click apps to open them.
If they are both opened in folder, please try to unpin and repin apps on start screen.
If they still do not work, do the second test.
Second test:
If only the Office suits could not be opened, please try to re-install the Office 2013 to test.
If all the apps could not be opened, Please follow these steps to check the issue.
Step 1: Try App troubleshooter:
http://download.microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Step 2: Re-register app files:
Run the following in a Command Window (CMD) to re-register the Store App:
powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.XML
For your reference:
Fix Store App in Windows 8.1 (AppxManifest.XML)
http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
Step 3: If the issue still persists, please try to log on with local account and re-bind your Microsoft account in Windows Store to see what’s going on.
Hope these could be helpful.
Regards,
George Zhao
TechNet Community Support

Captivate 7 Stuck Loading after installing Microsoft Office 2013

Similar Messages

Maybe you are looking for