Captivate 8 Glitch, with Multi-Synch Video

So i'm working on a project, and was able to get playback controls working fine for a Multi-synched video.
The dimensions of the video are 1024x576. So when I import the video at full lenght (3+ minutes). It comes in fine with no black bars at the top and bottom.
So now I want to circulate this for a test, so people don't need to see the full 3-minutes. To save time I shortened the video to 30-seconds with the same dimensions.
Now when I import the shorter length video as multi-synch, it appears with black bars at the top and bottom and is almost square. The dimensions are exactly the same.
I even re-imported both to see if I was doing something wrong, and the 3+ minute is full with no bars.
30 seconds, square and with bars.
Is this a glitch?
M

Hey Rick, I used Media Encoder, and attached a screengrab. Both videos look identical when played back, other than the shortened length. They were both exported at the exact same settings.

Similar Messages

Is my flash player broken? Skipping green screen glitch with sounds.

Is my flash player broken?
I'm getting a glitch with almost every video hosting like Youtube, Vimeo, vk.com etc. It's a glitch with green screen and the video starts skipping video in big parts, also making scary sounds, sometimes it starts doing it when the video is playing byitself,
sometimes when i skip on a particluar part. It happens to almost every video. I'm not sure what the issue is, I get it in Mozilla and Chrome. I reinstalled flash player 5 times, cleared cache, deleted browsing hystory, tried everything.
Please help. Here's the video of my issue:
http://www.youtube.com/watch?v=jVJm5ArYOh4

I did that, and worked. I was reading another thread and saw this (disabling hardware acceleration should work), then I restarted, and tried using HA and again green screen and crashing. Now I'm using without HA and so far, so good. I sent a report to AMD, because I'm using latest drivers for Radeons and obviously there is an incompatibility.

Does Captivate 7/8 support *Dynamic* Streaming Video for synchronized Multi-Slide videos?

I'm experimenting with inserting Streaming Video into Captivate Lessons. I've set up an Adobe Media Server (AMS) to stream the video.
When inserting Multi-Slide Synchronized video, it's not clear whether/how I can insert a Dynamic Streaming Video link in a synchronized Multi-Slide Video.
(The Dynamic videos can switch between videos of varying quality based on the user's available bandwidth.)
I think you're supposed use a URL that points to a manifest file (.F4M), which catalogs the videos of varying bitrates. However, I can't seem to get it to work in Captivate and Adobe is a little vague on how/if one references the manifest file. (i.e. I can't find any examples.)
So, does Captivate support dynamic streaming video?
If not, which is more robust in Captivate? HTTP progressive download or regular (non-Dynamic) RTMP Streaming Video?

Thanks Erik.
We did some more tests/checking-around and have convinced ourselves that the URL needs to point to the manifest file in order for Dynamic Media Streaming to work.
When we examined the Adobe Media Server sample web page (below), we found buttons to select different media sources.
The 'Multiple Bitrate' button under RTMP Dynamic Streaming Sample is mapped to the URL of an F4M (manifest) file.
The 'Single Bitrate' button is mapped to an individual mp4 file.
We also found more clues in the FlowPlayer RTMP F4M page.
Also, I'm guessing that Captivate can't handle adaptive bitrate streaming from non-RTMP sources based on the menu options. (See screen capture below)
If the menu above is correct, the first choice is the opposite of streaming media, because it says 'Progressive Download'. (Progressive download caches the video file on the client machine.)
The next one is for private Adobe Media Streaming and the third is for 3rd-party Adobe Media Streaming services.
So, I'm pretty much convinced that it's not supported.

Ipad 2 won't synch video with itunes

Greetings. I have an ipad 2, ipdated to OS6 recently. I manually synch video content from itunes on a Mac Mini on OSX, Itunes 10.
I noticed 2 problems today, most troubling is that my video content was gone. I connected the Ipad to itunes via USB and tried to synch video content two ways: first by making playlists, then choosing specific videos to transfer to the Ipad. In both cases, no video content was transferred. At first, when I changed the method of synch, the "capacity" bar at the bottom of the screen shows the video content. The status shows that synch is in going on, and then suddenly it stops and no videos are transferred at all.
I wanted to see if anyone has encountered this problem an found a solution before I restored to factory settings - it seems as if this a glitch with the new OS and maybe someone has a work around.
Thanks in advance.
Lm

You apps are crashing. Try these simple troubleshooting steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You can also try this for the issue with Safari.
Go to Settings>Safari>Clear History, Cookies and Cache or Data . Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Errors/Glitches with my brand new Equium A200 15I (incl video hardware)

Hi,
I just treated myself to a new laptop last Saturday and have thus only had it for about 3 and a half days so far but I noticed a few small things that I weren't sure were errors/faults or if they were just because its new, such as the fact that sometimes I type things with the keyboard and some of the letters don't appear on screen, which I think is probably more to do with me not typing or pressing heavily enough on the keys rather than anything else, its not happening so much now...the touch pad gets a bit sticky too and it thinks I want to scroll up and down when I want to move the cursor not scroll sometimes but I manage to get it to work, I think most laptops have glitches like this and presumably I could help fix it by calibrating the touch pad(?) I haven't had time to look into that yet though... there are a few other things though and most worryingly just this morning I got a video hardware error message, so now im a fair bit worried/suspicious that there may be a real fault with it and would like to know if this is the case, whether its something I can possibly fix (im no real expert especially with hardware but I can always try downloading and installing updates/fixes and that sort of thing if it'd fix problems).
The main thing which is worrying me most, is that this morning a message suddenly came up on screen, warning me that there had been a video hardware error, yesterday evening, which I clicked on a button I think to load more info. and I took this screen cap of it:-
http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg
I thought it may help to show the actual full message rather than just trying and pasting the info., well ok to be honest I didn't notice it let you copy it to clipboard but oh well (oops lol).
I know there's a topic about a similar error but I didn't want to butt in on that discussion as I presume that should be for that persons error to be discussed, mine may be slightly different I don't know... I followed the instructions given in that discussion and checked the device manager and no hardware faults are showing up there, btw it says in the device manager, under display adapters, that its a Mobile Intel 945GM Express Chipset Family, im sure all the A200 15I laptops have the same card but I thought I'd just clarify that. Incase that wasn't the right thing to check I also checked under 'sound, video and game controllers' (as the error said it was a video hardware error) where it lists the only one as being 'Realtek High Definition Audio' and I checked the properties there, on both under properties it says that the device is working properly, with no signs of any faults...
The thing is, I had read online somewhere that there is some issue with the graphics or video cards. I'd read that they can be glitchy and sometimes break down after the one year. I'd also asked my dad about this and we checked that it was an Intel graphics card that came with this laptop, which it is, and we reckoned that Intel chips should be as reliable as any other brand really... so I didn't think that there should be a problem, though if there is I have until next September to get it fixed before the warranty expires!
What surprises or kind of worries me though, is that the error message was only presented to me this morning. It dates the error as having occured at 19:53pm... I was using it last night and infact I went to have a shower and I put the laptop screen down before I went to shower at around 7:35pm, I presumed that its ok to just close the lid and it would automatically go into hibernate mode or something similar(?) im wondering if that had something to do with it, as I 7:53pm would have been roughly when I came back and lifted the lid/screen up again to use the laptop again... I can only presume, given the time it quotes, thats what caused the fault?
It does give me the option to 'update driver software' and 'scan for hardware change' within the device manager, should I run both or either of those perhaps? is this a common glitch? should I be worried at all etc...
Any help is much appreciated, if more info. is needed then let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics I have an old version of Paint Shop Pro which I installed yesterday morning, it seemed to install fine, thats Paint Shop Pro 7 from Jasc, I also have some converter programs (for vid files, 3GP and stuff), AVG Virus scan, Spybot Search & Destory, DBPowerAmp, FTP Commander, Quicktime and Real Player, fairly basic stuff like that, nothing much else just my old pics and vid files I transferred from my old XP laptop to this one, in my documents... I don't have any high powered or complicated games or anything else like that installed. Also at the time the video hardware error message states, all that was running when I had the lid down (or before I put the lid down) would have been Windows Live Messenger (though im pretty sure I signed out before putting the lid down) and an IE window, im pretty sure thats all, I wasn't working on anything else just checking the 'net...
There are some other things I've noticed too that I thought perhaps I should mention(?), one thing I've noticed it doing is the screen going blank and then coming back very quickly, alot. I've already asked about this a day or so ago as by then I realised that it was only doing that before loading the 'Windows needs your permission to continue' window/message, which apparently its supposed to do and is something to do with the computer switching from displaying the normal desktop to the secure desktop, which I sort of understand lol.
So I believe that isn't anything to worry about but I have noticed over the lastday or so, that the screen seems to do this more, going blank then coming back again, even when that permission message doesn't show up.
For instance this morning when I first put it on and went to check my home page, I clicked on a link at the bottom of the page or wherever to load another page within the website and the screen went blank for a moment before coming back a second later with the requested page. Is this normal too? or a Vista related glitch, or is there a possibility there may be a glitch with the monitor? im guessing it may be more of a Vista thing but I thought I'd ask here just incase, I decided not to pay for any extra insurance/extended warranty as I'm very careful with my items and take good care of them and so I'm being careful to try and spot any faults early on while they may be fixable under the basic warranty and what-not...
Another thing I've noticed is that to start with, when I pressed and held the 'FN' button, a range of black and white icons appeared on screen which told me which F button(s) to use to make certain adjustments, it still does that when I try it now but at other times, it doesn't show the icons, no matter how long I hold the 'FN' button down. That doesn't really matter since I can tell from the symbols on the keys on the keyboard which buttons to press but its just inconsistent, is there a reason why sometimes the row of icons on screen will show up when I press and hold the 'FN' button and other times it won't show at all?
Also sometimes if I move the cursor right to the top of the screen, those icons load as they seem to always be located at the very top of the screen but sometimes this is a problem, if im trying to click on something else and one of those icons comes up instead... im sure you can switch this option off somehow but should I be worried that the icons don't always show when I press and hold the right button(?) just trying to be cautious!
I think this post is long enough and I can't think what else I could possibly add to help, so I'll leave this here. I don't mean to seem too paranoid but thought it best to mention this stuff incase anyone recognises these glitches/errors and can recommend a quick way to fix any problems before they may develop into anything worse... many thanks in advance for any help with any of these issues!!
(mods let me know if im wrong to include so many things in one topic, I kind of did this quickly and I apologise if im breaking any rules I don't mean to, if possible please break this into a few different topics or I can do this, though ill be at work frm 2-9pm today so might not be back and able to check here until Thursday morning (October 4th))

Hi Isla
Your message is really, very, very long. I think its too long to read it twice ;)
. Regarding all your issues on this notebook well. it looks like you have installed many 3rd party programs and applications. In such case its not easy to say if such issues are software or hardware related. But I presume its software.
I checked your screenshot pic but I have never seen such error message. But it looks like something wrong with the graphic card driver. The message says something about Live Kernel Event
A kernel's services are requested by other parts of the operating system like graphic card driver for example.
In such case I would recommend updating the graphic driver. According to you message its a Intel GPU. So you could check the Intel page for the compatible graphic chip driver.
Regarding the FN key issue;
The Toshiba FlashCard utility controls the FN key functionality. I have read in this forum that this application does not run smoothly and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The FlashCard Utility is a part of the Toshiba Value added package.
So finally one more hint:
You should always check for the Vista updates on the Microsoft page. This OS is not perfected and Microsoft releases very often patches and fixes
Hope it could helps a little bit.
If necessary just ask for more info :)
Regards

Video Glitches with 10.5.2 & 10.5.1

I've had a number of video glitches with my 2x867 MDD with the OEM GeForce4 MX (32mb) card, an Apple 15" Studio Display on the ADC port and an LG 22" LCD on the DVI port when using 10.5.2. I have not noticed them booting off the Leopard Update DVD. What I see is flashes of mostly white boxes with green or black edges. The flashes are fewer with 10.5.2 than they were with 10.5.1, but they're not gone.
Also, from time-to-time, the LG monitor will be lost at boot-up. Nothing will display on it, System Profiler says there's only the ADC connected monitor, etc. even though the monitor shows that it's connected to the computer.
Anybody else seeing this?
Ray

Boys n Girls
I am Currently restoring my Power Book after a significant meltdown.
Thanks for posting I too saw the shearing effect but shrugged it off thinking oh well I'll just reboot!
If you are seeing this Buy a fire wire drive NOW and Back-up.
I suspect the Video update changed a low level feature in the power management routines and this resulted in my Power book cooking itself.
I've got a 12mth old Hitachi 7200 PATA drive in my Power Book after the Apple Drive cooked itself soem tim back and I have now got to back-up and restore my whole system. Luckiliy I have plenty of Big fast firewire drives around so I'm imaging the corrupt drive and going to run the Hitachi tool on it via a WINDOZE Thinkpad. Then a combination of clean install of 10.5.x and a migration assisted restore should do it.
I'm really not very happy though! My Time machine image did not restore and the disk repair did not work. I have a corrupted asl.DB ( the log file for Apple System Logs) and the mac won't boot from its internal drive.
I'll post the resolution here as it happens I'm at hour Disaster + 24 so I'm really cranky!
I suggest If you have a G4 Power Book you resist the temptation to install the video update.
Regards

Is there any way to get ichat back with mountain lion? also is there a way to have multi-person video chats with messages?

is there any way to get ichat back with mountain lion? also is there a way to have multi-person video chats with messages?

There is no way that I know of to install iChat because it is not supported in ML. You may want to read a couple of these Threads
https://discussions.apple.com/thread/4143616?start=0&tstart=0
https://discussions.apple.com/thread/4151787?start=0&tstart=0

Synching audio problem with MPEG-4 video in QuickTime

Hello,
I’m having a problem with MPEG-4 video file I created with TechSmith Camtasia (6.0.1).
Problem: The audio does not sync up with the video when played with Apple QuickTime 7.6 (latest build) in Windows Vista. The longer the video plays the more out of sync the audio is. Here's where it gets interesting:
When I play the file using Adobe Media Player or Adobe Flash Player (plug-in in Internet Explorer), the video and audio sync up and all is good.
Is there a problem with how Quicktime decompresses this type of file?
Does anyone have any idea what is happening?
Thanks,
Leo

If I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za

"computer can not initiate a multi-person video chat" ?

2 of us have MacBook Pros, third guy has new MacBook.
Our MacBook's have OS X 10.5.8,
The new MacBook has OS 10.6.1.
Me and the other person can iChat with 3 other ppl,
but when we added the new guy as a buddy, neither one of us could get him to come up.
He said When the call came in, two (2) video screens popped up and if he hit accept on
either one, it would decline on our end. (this happened no matter which MacBook Pro initiated the convo)
We then had the MacBook try to initiate the 3 way and it came up with an error that said
"computer can not initiate a multi-person video chat"
I've never even heard of that.
Is this a glitch, or a setting that needs to be changed?
Seems weird that the older models do it fine, but the new one is not configured right, but maybe we're missing something.
thx

Hi,
Welcome to the  Discussions
You are saying that, no matter who Hosts, when they invite the 10.6.1 Buddy he gets two Invite windows ?
This sounds like he is connected to the Internet twice.
On Sending the Visible Invite iChat does not check the validity of the Return Message.
You can be logged in twice for Text Chatting so it is not an uncommon state to exist.
However in most cases this is either two apps or two computers.
When iChat gets past the Visible Invite stage as only one reply get returned for the Acceptance it moves into sending a SIP invite separately on a different port and part of this Process is to confirm where the Visible Invite went to is where the SIP return data is coming from.
If there are two connections to the Internet at his end (and there are several causes) you will get an Error 7 showing when the Video chat is ended by all parties.
Error 7 = Remote IP Invalid
The Message you are getting may point to another problem and that is he is not on an Internet connection fast enough to join a 3 or 4 way Video chat.
He needs to have at least 384 kbps as an Upload and not capping the iChat Bandwidth below the 500kbps mark. (iChat Preferences > Video Section > Bandwidth Limit drop down)
9:17 PM Friday; January 29, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

Can't synch video files, video podcasts or convert iTunes video to iPod vid

I don't know what has changed recently - I don't recall a new version of iTunes being installed but I am on iTunes 9.1.0.79 under WindowsXP.
I am no longer able to synch video podcasts which have been downloaded via Juice and video from iTunes-subscribed podcasts which were both in the right format and synching happily before whatever it was that changed, changed.
In addition, I cannot right-click and convert video to iPod format - that option isn't there. It has either gone (boo) or the video IS in iPod format in which case why isn't it synchcronising?
I've spent many hours now trying to work out what's changed, gone wrong, what kind of settings need to be changed to get back to where I was.
HALP!

I'm having the same issues! I used to be able to convert video, but that option is no lnoger there. My video is in a Quicktime format(which I thought was supposed to be compatible with itunes anyway) and it won't play.
And since when aren't you allowed to email customer support?? They want me to pay a min of $29 to have an analyst call me at my convenience? Bunch of greedy bastards!

IChat not allowing initiate of multi party video

iChat works for me in almost every case...even iChat to AIM...and even when the remote location is behind 2 NAT routers. It has worked between Tiger and Leopard, between Tiger and PC/AIMver5.9, and other scenarios. However, there is now a problem. I can video chat with user B (Tiger, iMacG5). I can video chat with user C (Leopard, iMac). I can make successful video calls to appleu3test01. I can even initiate multi party video chat with user C and appleu3test01. Typically, connections to user B come up at 1mbps (1000 kbps). I CANNOT initiate a multi party video chat with user B and appleu3test01. The problem is if I call user B first, my iChat will NOT let me add appleu3test01. However, if user B initiates the call, it works....but the video quality is not very good. One note, the video chats with user B typically come up a 400kbps. I have Quicktime set to "1.5mbps T1/LAN". I 've tried iChat set to 500kbps, 1mbps, and none. No other problems (so far) using video chat as initiator or receiver.

P.S.
In addition to my reply about the user B video settings and stacked icons...recall in the original post I noted that user B was able to initiate the multiparty video call just fine, and it worked. This would require him to have the "stacked camera icons", I think. In any case, he did show stacked icons when I initiated the video call, which connected to him just fine as the first participant, but then iChat would balk at my attempt to invite the next participant.
One thing that may be useful is that the message whe I tried to invite the last participant was that the participant was already in a chat...however the last participant's icon was showing as "available" for multiparty conference (ie; stacked icons). Maybe this indication was simply wrong and the last participant may have already been in a chat, especially since that participant was the "appleu3test01" user, which I imagine is very busy
If this is the case, it's just frustrating that iChat would show the user as fully available for multiparty video chat.

10.6 and multi-buddy video

I used to be able to initiate multi-buddy video chats with my MacBook Pro and my existing cable service. After installing SL on Friday, I can only do the one-on-one chat and get a message my internet service is too slow.
Looks like they increased the resolution in this latest iteration (one-on-one chats look great) and this probably requires more bandwith. Is there any work around to this issue? I would like to be able to go back to the poorer resolution for the times I want to start a multi-party video chat if that's what it takes. Going backward in capability wasn't something advertised before hand...
Thanks.
Jon

Hi,
From iChat Help
Internet connection speed
To find your connection speed, contact your Internet service provider (ISP), or refer to the documentation your service provided. The speed listed in the documentation is a maximum possible speed; the actual speed may be lower.
Start an audio conference: Regular broadband Internet connection (100 Kbps or faster)
Join an audio or video conference: Regular broadband Internet connection (100 Kbps or faster)
Start and host a video conference: Fast broadband Internet connection (384 Kbps or faster)
The Speeds are UP and Down stream speeds.
There are no changes in this from iChat 4
Try deleting com.apple.ichat.plist which may be holding the wrong bandwidth Connection speed it can "see".
4:34 PM Monday; August 31, 2009

Multi-threaded video decoding problem

I have simple AIR 3.8 application with 2 VideoPlayers:
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
applicationComplete="init()"
showStatusBar="false"
>
<fx:Script source="MultiVideoPlayer.as" />
<s:VGroup width="100%" height="100%" >
<s:HGroup width="100%" height="100%" id="row1" >
<s:VideoPlayer width="100%" height="100%" source="assets/2.mp4"/>
<s:VideoPlayer width="100%" height="100%" source="assets/3.mp4"/>
</s:HGroup>
</s:VGroup>
</s:WindowedApplication>
Both videos are H.264 Full HD samples.
I launch application and multi-threaded decoding works fine - all cores are involved and CPU usage is around 70%.
When I replace source of VideoPlayers with exactly same files programmatically - videos are reloading, but they doesn't play smoothly and multi-threaded decoding isn't working anymore - CPU usage drops to 10%.
Is there any way to force use of multi-threaded video decoding when videos are loaded dynamically?

After some hunting I found a Twitter post confirming that StageVideo on AIR 3.2 is not supported on Desktop.
But one of the notable features of Flash Player 11.2 is Multi-threaded video decoding.
Does this mean that standard (non-StageVideo) implementations of Video are now automatically using a separate CPU thread?
If so, this would be a reasonable workaround for smooth video on Desktop.
Here's Adobe's description of the feature...very vague.
Multithreaded video decoding (Windows, Mac OS, and Linux) — The video decoding pipeline is now fully multithreaded. This feature should improve the overall performance on all platforms. Note that this feature is a significant architecture change required for other future improvements.

Using a webcam to capture multi-track video

hi,
i was hoping to use the webcam on my macbook pro to capture multitrack video.
i read here that premiere elements can do it: http://help.adobe.com/en_US/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html
but asked here and found out that premiere pro can't:
http://forums.adobe.com/message/4442004#4442004
i am a member of the creative cloud, but i can't seem to find premiere elements.
is there any way for me to set up the mac so that multi-track video software can capture the webcam? something like camtwist?
one suggestion is for me to go and buy a video camera, however, i'm making overdubbed acappela music -- and i'd never even take a video camera anywhere (because i just take my phone and that's it, i don't like being weighed down with lots of equipment).
so, i'm still kinda thinking there might be a way for me to capture the webcam -- especially since premiere elements looks to be able to do it.
suggestions?
sincerely,
dainis w michel

ok, so knock off that possibility.
any way to use my webcam to record multitrack video?
best,
dainis

Captivate 8 Glitch, with Multi-Synch Video

Similar Messages

Maybe you are looking for