Captivate 8: Learning Interactions.

How can I:
1). Add additional options to "Millionaire" like in "Jigsaw". I am working with multiple-choice questions that have 5 options but "Millionaire" only allows 4. Working with "Jigsaw", I can add options but cannot with "Millionaire".
2). Attach images to questions and correct/incorrect boxes in "Millionaire" and "Jigsaw". Some questions have diagrams.
3). Attach audio to questions and correct/incorrect boxes in "Millionaire" and "Jigsaw".
4). Print certificate widget after "Millionaire" and "Jigsaw".

Double post, is also in the Advanced section.
Learning interactions are canned, you cannot change more than what is provided. Create your own interactions if you want to do that.
None of those game learning interactions will take the score from the game itself, score attached to it will be given if the game has been played (even for only a limited time).

Similar Messages

Using Flash Learning Interactions in Captivate

Hi there,
I am developing a short practice quiz in Captivate, but for
one of the questions I want to use a Flash CS3 learning interaction
(the "Hot Spots" one). I get the Flash file built, import it into
Cpativate, and everything works.
Now for the big question - how do I get Captivate to track
the successful/unsuccessful action from this question in a quiz? I
want to present users with a results page at the end of the
practice quiz, but since this question is not built with a
Captivate question slide (like m/c, t/f, etc.), how can I track the
result and include it on the results slide at the end?
Thanks in advance for any help!
Cheers,
Shawn

Hi J and welcome to our community
There is no way (back door or otherwise) that I'm aware of to
do this. Unless, of course, you mean to use Flash 8 and export the
Flash in a version 6 format.
Hopefully we will see Flash 8 files working just dandy in
Captivate version 2.
Cheers... Rick

Adobe Captivate Help | Learner Notes interaction

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/learner-notes-interaction.html

Is there any way to swap out the 'Widget Note' icon? It bad artwork.
I have a cool custom button that I wanted to bring up the Note widget. Also, if I put the Note Widget on top of my custom button, it blocks the button's glow for the mouse over state.
Any ideas?
cheers

Adobe Captivate Help | Smart learning interactions

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/smart-learning-interactions.html

Is the Scrolling List interaction just a fancy way of displaying content versus a traditional text caption? Thank you.

Captivate 8 - Can I change the look of the Learning Interactions?

I am referring to the Learning Interactions provided by Captivate. Is it possible to alter the look of it? For example, delete the space for the Title and just keep the text interaction?
Basically not using the default designs but keeping the interaction.

There are quite a lot of interactions, different kinds: static and interactive, with or without an associated variable. Some can be replicated, others are a lot more difficult. And it also depends on the output you are looking for? In HTML5 none of the movement effects, nor rollover objects are possible which limits seriously the possibility to replicate the sliding interactions. And you have to prepare for a lot of work. Before the interactions were available I already created a Memory game:
Concentration Game - created exclusively with Captivate - Captivate blog
And for sliding: before it was included I created this work flow to have the playbar appear/disappear on rollover/rollout:
Auto-hide Playbar! - Captivate blog

Captivate 8 Windows crashes when inserting Learning Interactions

Hello, all.
I'm running Captivate 8 one Windows 8.1 Pro laptop, with 8gigs of Ram and an Intel Core i5 processor.
Every time I try to insert a Learning Interaction - every one I've tried (except the timer) - it after about 30 seconds of NOTHING happening, the program crashes. I get the "Windows has stopped responding" and then the "close program." dialog.
And yes, I have tried both running as Administrator, and not. Same problem.
Has anyone else encountered this, and do you know of a fix?
Thanks,
Keith

Rick, I spent over 2 hours on the phone with Support. They were great - but ultimately came to the conclusion that there was a problem with my Windows 8 install.
I went back, completely uninstalled, and re-installed 64-bit Captivate (I run 64-bit Windows). That partially solved the problem, but not completely. Some interactions work, others don't. And it's still buggy as h ell.
Support's advice to me was to do a full, clean install of Windows 8 - and then to install Captivate FIRST, before installing other software. I realize that's a massive job and a major pain - but if you rely heavily on Captivate, I might suggest trying it.
FYI, I have been working on a fairly good laptop - i5 processor (3.2ghz) and 8 gigs ram. But I was in need of a new desktop for heavier applications anyway. So I took this as the time to upgrade my desktop. It arrives today - and the first thing I'll install is Captivate. I'll post back here whether that solves all my problems.
All of that said, I'll probably do a clean install on my laptop soon.
That's all the info/advice I can give. Best of luck!
Keith

Windows 8 on Surface Pro - Captivate 8 crashes when I try to add Learning Interactions, very slow

I keep trying to start a blank project and inserting a learning interaction but it keeps crashing. I need this fixed ASAP!!!! I had tried importing a ppt, and forget that. It was corrupted supposedly.
I changed my firewall settings, no help there.
I downloaded elearning assets, no change.
I ran as admin, no change.
Please advise.

I would start with this FAQ Entry first, if you have not done so yet: http://forums.adobe.com/thread/792580?tstart=0
It starts with a checklist for getting PrE set up properly, then moves into tuning up one's system and OS (you have done a lot of that already), and then goes into troubleshooting tips. Note: those tips rather work up quickly in "degree of difficulty," and DO become quite technical, but things like the "Finding Clues" link will give some tools, that might prove useful, like the use of Windows' Event Viewer to track down issues.
One of the first things to look at would be your video driver. I would go to the video card's/chip's mfgr's. Web site, and check for a later driver. Do not trust Windows, or any utility to tell you if you have the latest driver. If there is not a newer video driver, or it will not install properly on your system, be sure to check with the HP Web site, as HP, Dell, Lenovo, and some other mfgrs. will re-package video drivers to suit their specific setup.
One troubleshooting technique, that might prove useful (however, those deleted programs bother me a bit here), would be to create a System Restore Point for now (see Windows Help for doing this with your particular OS version). Then, boot to Safe Mode, and choose an older System Restore Point, from when things did work. This might take some trial-and-error, to get back far enough. Test. At the worst, you will only have lost a few minutes, as you have your new System Restore Point for now, to fall back on.
Good luck,
Hunt

Learning Interactions not working in Chrome

This is my first time using Captivate (8.01). My problem is that 3 widgets/learning interactions are not working when viewed in Chrome. It is a responsive project. They work fine in Safari.
Would greatly appreciate any information about how I can fix this. Thanks.

Yes. Jeopardy, Process Circle and Millionaire. I did find out (through a nice, long -and helpful -chat with Adobe support) that these interactions will work on the Chrome browser when accessed from an LMS. I needed to send them out to reviewers because I didn't have access to an LMS. I just defaulted and asked them to use a different browser.
Thanks for replying and offering to help.

How Can I Remove Tabs That I Added in a Learning Interaction Widget?

Hello, I inserted a "Tabs" Learning Interaction widget into a Captivate 8 project I'm working on. Adding tabs is easy enough by simply hitting the plus button. But when I want to remove a tab, I can't for the life of me determine how. Any help would be greatly appreciated! Thanks

When you double-click on a Tab button in the Interaction Properties, you'll see a minus sign that will allow you to delete that tab. Beware: you need a minimum of at least 2 tabs, maximum is 5 tabs.

Flash learning interaction and Course Builder for CC products?

Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
Thanks for any response.
Yarik

You would be better advised to ask these questions on the Flash or Dreamweaver forums. This is the Adobe Captivate forum.

Flash learning interaction and Course Builder extensions for CC products?

Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
Thanks for any response.
Yarik

You would be better advised to ask these questions on the Flash or Dreamweaver forums. This is the Adobe Captivate forum.

Smart learning interactions

I know that Adobe has a service where you can watch past webinars, where can I go to find out about past webinars on smart learning interactions also I would like to know which smart interactions work with HTML 5 and which do not I'm using Captivate 7

Not sure there were a lot of webinars on interactions. I talked about them at DevLearn in October in a presentation, have also an overview in a table somewhere (not yet public).
All interactions are normally HTML5 compatible (contrary to widgets), but I think there is still a problem with the Jeopardy game? Hope someone from staff will confirm. It has been a while I didn't test that one on HTML5.
Lilybiri

Unable to load any Learning Interaction

When attempting to go to the Learning Interactions menu choice from the Interactions top menu, the window that appears loads blank at first, then some of the learning interactions choices appear, but the window does not scroll down to see more samples, and when I click the insert button attempting to insert any of the choices that finally appear in the window, another small window appears saying "Not a valid widget". I have restarted captivate 8.1 on my Mac O.S. 10.9.5. several times, as well as tried this on a number of projects. Please help!
Thanks,

Which version do you use? Is CP installed on your system, not on a network drive, and are the folders pointing to your CP-files and cache both on your system as well? Are you connected to the WWW, because there are regular updates and your system will try to download them? Do you run Captivate as administrator? Can you find the interactions, they should normally be copied to a Public folder, under 'Adobe\eLearningAssets' but I don't know where it is on Mac (using PC myself).

Problem with Button in Learning Interaction

I have created a Flash file with 4 "Fill in the Blank" questions (from the Learning Interactions continued within Flash CS3) at the end. I'm then using the swf file in two different ways. One way simply loads the swf file onto a 'stand-alone' page on my website and it works perfectly.
The other way I want to use it is integrated into a more complicated website where I have a Flash File into which various swf files are loaded when needed. In this version the "Control Button" doesn't change to "Check Answer" and "Reset" as it should and the whole question doesn't work.
The working version is at http://web.me.com/ginneswatsonkelso/New_Chemical_Resources/Name_Isomers_Alkanes.html
Select "4 For You to Try" to go directly to Quiz Questions.
The non-working version is at http://web.me.com/ginneswatsonkelso/New_Reaction_Pathways/New_Reaction_Pathways.html
Go to "Extras" in Menu and select Naming Alkane Isomers, then "4 For You to Try" again.
I'm using ActionScript2 and set for Player 9.

Yes, my original technique was to upload the Parent SWF to a folder and then the HTML widget on my webpage would load the file from that location. As you say, all the daughter swf's had to be uploaded into the folder created for that webpage when iWeb uploads my website to MobileMe. This has worked fine for all my other daughter swf's but (I'm presuming) there is something about the Learning Interaction that doesn't let it work this way.
The other disadvantage of doing it that way is that anytime I tweak the original webpage and iWeb uploads the changes, it recreates the page folder minus all my daughter swf's and I have to upload them manually again.
What I've now done is uploaded all the daughter swf's to the same folder as the Parent and added a full web address to this folder in all my loadMovie commands in the Parent swf. Done this way, the swf with the Learning Interaction works as intended.
Many thanks for taking the time and interest to help.

Flash learning interactions, what am i doing wrong

Hi all
everytime after i modify and then save and publish a learning
interaction...... i get a standard error message and flash shuts
down. also none of the modifications i make save...... how do you
save the the modifcations made to a learning interaction ? one i am
in the component inspector and i make changes to the Learning
interaction...... where do i go to save it, there is nothing in the
component inspector and paramters that points to saving..... so i
have been saving the fla as normal... eg under file menu 'save
as'... i then test the movie and get nothing.
Can anyone help ?

Dave,
> I have a Flash 8 FLVPlayback component on stage, with
> an instance name of 'vid'. In a frame script I have:
>
> vid.setMedia("dd2.flv");
> vid.play();
The FLVPlayback class does not feature a setMedia() method,
that I can
see. According to the docs, FLVPlayback "wraps"
mx.video.VideoPlayer. Not
sure if that means "inherits," but assuming for sake of
argument that it
does, the VideoPlayer class does not faeture a setMedia()
method, either.
Unfortunately, the docs get a bit cryptic at this point, IMO.
The FLVPlayer
Component has a contentPath property, as you mentioned, but I
don't see the
same property in either of the aforementioned classes.
Perhaps something in the inheritance chain provides for a
FLVPlayback.setContent property. I see references to a
mx.video.NCManager
class, but can't seem to find that class reference anywhere.
If you can do without the FLVPlayer Component, you may just
want to use
a Video object to load your external FLV.
http://www.quip.net/blog/2006/flash/how-to-load-external-video
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Captivate 8: Learning Interactions.

Similar Messages

Maybe you are looking for