Captivate 8 resolution issues - devil in the details
I want to get good resolution with imported power point, and also video demo screen capture. My priority is on the video demo, because I am capturing a fairly busy screen with much text and graphics, and the __ text may be rather small ___ . The issue is that with any scaling, even 10 %, some fonts will appear off and chopped. My target resolution is 1024x768( I defined this at project creation). when i captured, i had captivate size my window to the red 1024x768 box. But the resolution is NOT as good as I expected. I wonder - does the button window (stop, skip, etc.) that gets added at the bottom of the window screen things up ? In other words, if the vertical resolution including these buttons is 768, then the content window may be something closer to 700. This would explain the odd effects. Adobe must have this all figured out already in best practices. need to have the captured video look the same as the original- there is no technical reason why this is not possible.
thank you!
Thanks for the thoughtful suggestion. I carried out an experiment using your method, and I didn;t see too much difference in the captured video quality for the text. It might be better, its not obvious to me. master project is 1024x768. I made the video capture project 1600x1200 to match my 2nd screen monitor resolution. I see there is some odd behavior with the red rectangle that appears for capture; this seems to be a bug for 2 screen operation. In any case, I ignored the 'snap to application' so it didn't matter.
I also see that the effects are really in a few categories: scaling, image compression, and dynamic range. I have left the compression options at default, but i experiemented with 32 bits instead of 16 bits. This gives marginally better text contrast and clearer icons.
Since capturing a screen session with text and icons is not an unusaly requirement, it would be great if there are guidelines for 1:1 scaling. They must exist, but in the meantime I'll keep experimenting. Next I'll have to try some more detailed graphical items, and also manual zoom and pan.
Similar Messages
-
Issues in displaying the details in the transaction CS03
Hi Group,
I am facing an issue in the Transaction CS03 while displaying the EXTRAS->MORE->Parameter Eff Value Assignment as under:
we have created a set of BOM items on the previous data(21.11.2011) with a different Changed documents for the two BOM items. when we checked the same in CS03 with the Effectivity 'Serial no' , Date (as today - 22.11.2011) and Material as Main material, the System is throwing a message 'No items are valid on 22.11.2011) and when I checked with the same using the Current date(22.11.2011), the BOM items are getting displayed correctly.
Now the requirement is that, the User should be able to see the BOM item details(irrespective of the dates) using the Serial number created in the Change document number for the BOM items.
Kindly provide inputs ASAP.
Thanks in advance for your help.
Regards,
Vishnuhi Group,
I resolved the Issue myself by managing to populate leading zeros for the Serial Number while creating the Change document number and it resolved the issue.
thanks for your help.
Regards,
Vishnu -
Macbook Pro 15" Retina Windows 7 HDMI Resolution issue
Hello,
I have a late 2013 Macbook Pro 15" with Retina display running bootcamp with Windows 7.
I have connected the Macbook to an external HP w2448hc display using HDMI interface.
When booting to OS X 10.9.4, the resolution of the external display is set to 1920x1200 and it looks fine. See picture below:
However, when booting to Windows 7 the resolution on the external display looks lower (although shows up as 1920x1200):
I have another PC which I have connected to the same display with HDMI and the resolution also shows up as 1920x1200. However, in this case the resolution indeed looks as the correct one:
Although not seen very well from the screen shots, both the PC and the Macbook Pro (with Windows 7) show the same resolution in the settings, but the desktop and icons under Macbook Pro (bootcamp) look bigger and with smaller resolution.
Does anyone know how to solve this?Hi,
I managed to fix this resolution issue by lowering the color depth to 16bit for the external display. Not exactly sure why was this necessary, maybe for some reason Windows cannot allocate enough video memory for both displays? -
How to keep the Result Line only and delete the details
Hello
I am having a Bex issue, i have the details lines and the Result Line, i would like when i run my report, i keep only the Result Line and hide all the details
can any one help?go to Properties of Keyfigure and set 'Calculate <u>Single</u> Values as....' to 'Suppress Result'..
-
Interspersed screen Issue while publishing the file in captivate
I have noticed some images/backgrounds in published file overlapping with images in previous frames (Interspersed screen).
It always happens when we publish the captivate file more than once. How can it be avoided.
Following are the details I think may be helpful in resolving this issue:
Captivate Version - CS6
Flash Player - 10
Operating System - Win7
Thanks in Advance for your help.Try changing the slide quality if it is still Low to Optimized (now default in 6.1).
When publishing: uncheck Advanced compression, and check Force republishing -
I want to resolve the payment issue still pending .But I don't know what issue remains to be resolved by me? Unless I know the details of the issue how shall I resolve it
Apple is not here. Apple does not answer questions here. This is a user to user tech support forum, no ne here would have any knowledge of your personal account details or a financial dispute that you may have with Apple.
Mac App Store Support -
http://www.apple.com/support/mac/app-store/
iTunes Support -
http://www.apple.com/support/itunes/ -
Unable to enroll in Creative Cloud - regardless of browser or credit card the message is that my billing info is incorrect - anyone seen this issue or not the resolution - support could not resolve it?
If Adobe support can't fix the problem, I doubt that anyone in an open forum will be able to help (this is not Adobe support)
Change Account https://forums.adobe.com/thread/1465499 may help
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
or
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
HT5313 Does this fix the display resolutions issue with he 24" iMac?
10.7.4 only allows 2 resolutions - neither correct - on the 24" iMac. Does 10.7.5 fix this?
and I must have sent 20+ crash reports
if you have crash reports, then you have a different problem than the one that freezes 20" imacs while scrolling in iTunes, most likely you have a corrupted update, or corrupted iTunes data...
both can be deduced, by a clean install from your original system disks... (after you back up everything, and make sure you have it all, and it is good data)...
the simplest thing to try is to put your iTunes library somewhere else... (a back up would be a good place)...
then reinstall from your system disks, then download the combo updater, and update from that to 10.5.6... once you have that, only put a couple pieces of data into your iTunes library, and use that for a while to see if you have a crash....
if no crashes, then it was either a corrupted install, or corrupted data in your iTunes library...
if no crashes for a while, put 1/4 of your iTunes library back where it is supposed to be... and keep using it to see if there are crashes...
if you do get a crash after moving anything in, take it back out, and check for a while for crashes...
then you can isolate corrupted data that way. -
Resolution issue b/w monitors and Internet
I've been working on some night photos I took of the northern lights and I've run into an issue. After doing my usual processing with Photoshop my pictures look the way I'd like them to on my desktop monitor. I then do my usual Convert to Profile--Working RGB-SrGB and then Save for Web, followed by uploading them to the Internet. When I view these particular photos on the Internet on my monitor they look awful. The colors look grainy and unnatural and the photos have noise in the detail. I have spent hours running them through noise filters and making other changes. They will always look good in Photoshop and then terrible on-line. Then I decided to view them on my iPad and found that they look good! I don't think it's the desktop monitor resolution because they look good in Photoshop on the same monitor. Does anyone have any idea as to why they look terrible on-line on the desktop monitor but good on my iPad? I'm at a loss here.
The Profile is:
Settings: North America General Purpose 2
RGB: sRGB
CMYK: US Web Coated(SWOP) v2
Gray: Dot Gain 20%
Spot: Dot Gain 20%
Color Management Policies:
RGB: Preserve Embedded Profiles
CMYK: Preserve Embedded Profiles
Gray: Preserve Embedded Profiles
Here's an example of one of the photos:The image posted in this thread, above, and at the smugmug link given, are both tagged with the sRGB IEC61966-2.1 color profile. That's fine.
But...
The color values in the images are significantly different. The image you posted at the smugmug.com web site is a good bit lighter than in the image posted in this thread. That implies you either processed the image differently or reprocessed it between saving those two versions.
Specifically, redgreen2.jpg is lighter than redgreen7.jpg.
It's a bit hard to diagnose an issue when there's a moving target.
Can you describe exactly what you did between those two images? Perhaps the problems you're seeing with differences are because of something you're inadvertently doing. It crossed my mind that you may be looking at two different images and making the assumption that they should be the same.
-Noel -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
Any help will be appreciated!
k.regards
RamonHi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
Is there at least a work around, until this big fix comes along?
k.regards
Ramon -
Adf table with detail stamp , not able to close the detail stamp
Hi
i'm using 11g adf jdeveloper.
I'm using adf table to display records of XXXVO.In table i have used detail stamp, in which i have drag XXXVO read-only form and used a ADD button which call a pop-up with createInsert of the XXXVO form with submit button.In pop i have used a drop downlist of other YYYVO. I have used another button Edit which call the same pop-up, using show pop-up.
Issue is when i run the application i can open the detail stamp and close but i couldn't get the selected record on the table in edit mode pop up. if i give partial trigger in pop-up of table id . den i'm getting the selected record in edit pop up. but detail stamp is not working .
Here is the code .......
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:pageTemplate viewId="/XBBaseTemplate.jspx"
value="#{bindings.pageTemplateBinding}" id="pt1">
<f:facet name="body">
<af:panelBox text="AMC Charges" id="pb1">
<f:facet name="toolbar"/>
<af:panelGroupLayout layout="scroll" id="pgl1">
<af:panelCollection id="pc1"
inlineStyle="width:1105px; height:336px;">
<f:facet name="menus">
<af:menu text="Export Excel" id="m2">
<af:commandMenuItem text="Excel" id="cmi1">
<af:exportCollectionActionListener exportedId="resId1"
type="excelHTML"/>
</af:commandMenuItem>
</af:menu>
</f:facet>
<f:facet name="toolbar">
<af:toolbar id="t1">
<af:commandToolbarButton id="ctb1"
icon="/Images/browse.gif"
shortDesc="Search"
partialTriggers="resId1"
disabled="#{UsapProgramPrivilege.query}">
<af:showPopupBehavior popupId=":::p2"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_add"
icon="/Images/addsymbol.png"
shortDesc="Add"
action="#{MasterManagedBean.createRecord}"
useWindow="true"
windowModalityType="applicationModal"
windowHeight="300"
windowWidth="300"
disabled="#{UsapProgramPrivilege.insert}"/>
<af:commandToolbarButton
id="ctb2"
partialTriggers="resId1"
icon="/Images/update_ena.png">
<af:showPopupBehavior popupId=":::p_edit"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_delete"
icon="/Images/delete_ena.png"
shortDesc="Delete"
partialTriggers="resId1"
actionListener="#{bindings.Delete.execute}"
disabled="#{UsapProgramPrivilege.delete}"/>
<af:commandToolbarButton id="ctb3"
icon="/Images/filesave.png"
shortDesc="Save"
partialTriggers="resId1 ctb_add ctb_delete :::cb1"
actionListener="#{bindings.Commit.execute}"
disabled="#{!bindings.Commit.enabled}"/>
<af:commandToolbarButton id="ctb5" icon="/Images/undo.png"
actionListener="#{bindings.Rollback.execute}"
disabled="#{!bindings.Rollback.enabled}"
immediate="true">
<af:resetActionListener/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb4"
icon="/Images/eraser-4.gif"
shortDesc="Clear"
action="#{MasterManagedBean.onClearTableSearchFields}"/>
<af:outputText value="CmmAmcRatesVO1Iterator"
id="ot_amciterator"
binding="#{MasterManagedBean.iteratorName}"
visible="false"/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table value="#{bindings.CmmAmcRatesVO1.collectionModel}"
var="row"
rows="#{bindings.CmmAmcRatesVO1.rangeSize}"
emptyText="#{bindings.CmmAmcRatesVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmmAmcRatesVO1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.CmmAmcRatesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.CmmAmcRatesVO1.collectionModel.makeCurrent}"
rowSelection="single" id="resId1"
binding="#{MasterManagedBean.masterTable}"
styleClass="hieght:100% width:100%"
columnSelection="multiple" width="1099"
rowDisclosureListener="#{MasterManagedBean.onRowDiscloseureEvent}"
partialTriggers="::ctb_add ::ctb_delete ::::cb1">
<af:column sortProperty="AmrtPrdId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="resId1c1">
<af:outputText value="#{row.AmrtPrdId}" id="ot8"/>
</af:column>
<af:column sortProperty="AmrtFeeId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="resId1c2">
<af:outputText value="#{row.AmrtFeeId}" id="ot7"/>
</af:column>
<af:column sortProperty="AmrtRateTyp" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="resId1c3">
<af:outputText value="#{row.AmrtRateTyp}" id="ot11"/>
</af:column>
<af:column sortProperty="AmrtFxdAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="resId1c4">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot3">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtPerc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="resId1c5">
<af:outputText value="#{row.AmrtPerc}" id="ot4">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMinAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="resId1c6">
<af:outputText value="#{row.AmrtMinAmt}" id="ot2">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMaxAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="resId1c7">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot9">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtFolioId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="resId1c8">
<af:outputText value="#{row.AmrtFolioId}" id="ot1"/>
</af:column>
<af:column sortProperty="AmrtCurrId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="resId1c9">
<af:outputText value="#{row.AmrtCurrId}" id="ot10"/>
</af:column>
<af:column sortProperty="AmrtRndMthd" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="resId1c10">
<af:outputText value="#{row.AmrtRndMthd}" id="ot14"/>
</af:column>
<af:column sortProperty="AmrtDecPlc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="resId1c11">
<af:outputText value="#{row.AmrtDecPlc}" id="ot5">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtActiveYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="resId1c12">
<af:outputText value="#{row.AmrtActiveYn}" id="ot13"/>
</af:column>
<af:column sortProperty="AmrtHoldYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="resId1c13">
<af:outputText value="#{row.AmrtHoldYn}" id="ot12"/>
</af:column>
<af:column sortProperty="AmrtEffFdate" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="resId1c14">
<f:facet name="filter">
<af:inputDate value="#{vs.filterCriteria.AmrtEffFdate}"
id="id1"/>
</f:facet>
<af:outputText value="#{row.AmrtEffFdate}" id="ot6">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:column>
<f:facet name="detailStamp">
<af:panelFormLayout id="pfl2" rows="9">
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="plam10">
<af:outputText value="#{row.AmrtPrdId}" id="ot31"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="plam17">
<af:outputText value="#{row.AmrtFeeId}" id="ot20"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="plam11">
<af:outputText value="#{row.AmrtRateTyp}" id="ot28"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="plam18">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot16">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="plam14">
<af:outputText value="#{row.AmrtPerc}" id="ot30">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="plam1">
<af:outputText value="#{row.AmrtMinAmt}" id="ot22">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="plam13">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot18">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="plam7">
<af:outputText value="#{row.AmrtFolioId}" id="ot27"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="plam4">
<af:outputText value="#{row.AmrtCurrId}" id="ot26"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="plam6">
<af:outputText value="#{row.AmrtRndMthd}" id="ot25"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="plam12">
<af:outputText value="#{row.AmrtDecPlc}" id="ot21">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="plam2">
<af:outputText value="#{row.AmrtActiveYn}" id="ot32">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="plam8">
<af:outputText value="#{row.AmrtHoldYn}" id="ot24">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="plam15">
<af:outputText value="#{row.AmrtEffFdate}" id="ot23">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FeeDescription.label}"
id="plam16">
<af:outputText value="#{row.FeeDescription}"
id="ot29"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FolioDescription.label}"
id="plam9">
<af:outputText value="#{row.FolioDescription}"
id="ot17"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.ProductDescription.label}"
id="plam3">
<af:outputText value="#{row.ProductDescription}"
id="ot19"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.CurrencyDescription.label}"
id="plam5">
<af:outputText value="#{row.CurrencyDescription}"
id="ot15"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</f:facet>
</af:table>
</af:panelCollection>
</af:panelGroupLayout>
</af:panelBox>
</f:facet>
<f:facet name="first">
<af:panelStretchLayout id="psl3" startWidth="39px">
<f:facet name="bottom"/>
<f:facet name="center"/>
<f:facet name="start"/>
<f:facet name="end"/>
<f:facet name="top"/>
</af:panelStretchLayout>
</f:facet>
<f:facet name="top"/>
<f:facet name="Bticker"/>
</af:pageTemplate>
<af:popup id="p2">
<af:panelWindow id="pw1">
<af:panelGroupLayout id="pgl2">
<af:panelHeader text="AMC Rates" id="ph1">
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}"
resultComponentId="::pt1:pc1:resId1"
displayMode="compact"
/>
</af:panelHeader>
</af:panelGroupLayout>
</af:panelWindow>
</af:popup>
<af:popup id="p_edit" popupCanceledListener="#{MasterManagedBean.resetPopTitle}"
partialTriggers="pt1:pc1:resId1">
<af:panelWindow id="pw2" inlineStyle="width:600px; height:600.0px;"
title="Edit"
binding="#{MasterManagedBean.masterPenalWindow}">
<af:panelGroupLayout id="pgl3">
<af:panelFormLayout id="pfl4" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFeeIdId"
popupTitle="Search and Select: #{bindings.AmrtFeeId.hints.label}"
value="#{bindings.AmrtFeeId.inputValue}"
label="#{bindings.AmrtFeeId.hints.label}"
model="#{bindings.AmrtFeeId.listOfValuesModel}"
required="#{bindings.AmrtFeeId.hints.mandatory}"
columns="#{bindings.AmrtFeeId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFeeId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFeeId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtPrdIdId"
popupTitle="Search and Select: #{bindings.AmrtPrdId.hints.label}"
value="#{bindings.AmrtPrdId.inputValue}"
label="#{bindings.AmrtPrdId.hints.label}"
model="#{bindings.AmrtPrdId.listOfValuesModel}"
required="#{bindings.AmrtPrdId.hints.mandatory}"
columns="#{bindings.AmrtPrdId.hints.displayWidth}"
shortDesc="#{bindings.AmrtPrdId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtPrdId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FeeDescription.inputValue}"
required="#{bindings.FeeDescription.hints.mandatory}"
columns="#{bindings.FeeDescription.hints.displayWidth}"
maximumLength="#{bindings.FeeDescription.hints.precision}"
shortDesc="#{bindings.FeeDescription.hints.tooltip}"
partialTriggers="amrtFeeIdId" id="it10"
readOnly="true">
<f:validator binding="#{bindings.FeeDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.ProductDescription.inputValue}"
required="#{bindings.ProductDescription.hints.mandatory}"
columns="#{bindings.ProductDescription.hints.displayWidth}"
maximumLength="#{bindings.ProductDescription.hints.precision}"
shortDesc="#{bindings.ProductDescription.hints.tooltip}"
partialTriggers="amrtPrdIdId" id="it7"
readOnly="true">
<f:validator binding="#{bindings.ProductDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl6" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFolioIdId"
popupTitle="Search and Select: #{bindings.AmrtFolioId.hints.label}"
value="#{bindings.AmrtFolioId.inputValue}"
label="#{bindings.AmrtFolioId.hints.label}"
model="#{bindings.AmrtFolioId.listOfValuesModel}"
required="#{bindings.AmrtFolioId.hints.mandatory}"
columns="#{bindings.AmrtFolioId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFolioId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFolioId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtCurrIdId"
popupTitle="Search and Select: #{bindings.AmrtCurrId.hints.label}"
value="#{bindings.AmrtCurrId.inputValue}"
label="#{bindings.AmrtCurrId.hints.label}"
model="#{bindings.AmrtCurrId.listOfValuesModel}"
required="#{bindings.AmrtCurrId.hints.mandatory}"
columns="#{bindings.AmrtCurrId.hints.displayWidth}"
shortDesc="#{bindings.AmrtCurrId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtCurrId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FolioDescription.inputValue}"
required="#{bindings.FolioDescription.hints.mandatory}"
columns="#{bindings.FolioDescription.hints.displayWidth}"
maximumLength="#{bindings.FolioDescription.hints.precision}"
shortDesc="#{bindings.FolioDescription.hints.tooltip}"
partialTriggers="amrtFolioIdId" id="it9"
readOnly="true">
<f:validator binding="#{bindings.FolioDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.CurrencyDescription.inputValue}"
required="#{bindings.CurrencyDescription.hints.mandatory}"
columns="#{bindings.CurrencyDescription.hints.displayWidth}"
maximumLength="#{bindings.CurrencyDescription.hints.precision}"
shortDesc="#{bindings.CurrencyDescription.hints.tooltip}"
partialTriggers="amrtCurrIdId" id="it3"
readOnly="true">
<f:validator binding="#{bindings.CurrencyDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl1" rows="5" fieldWidth="150">
<af:selectOneChoice value="#{bindings.AmrtRateTyp.inputValue}"
label="#{bindings.AmrtRateTyp.label}"
required="#{bindings.AmrtRateTyp.hints.mandatory}"
shortDesc="#{bindings.AmrtRateTyp.hints.tooltip}"
id="soc1">
<f:selectItems value="#{bindings.AmrtRateTyp.items}"
id="si1"/>
</af:selectOneChoice>
<af:inputText value="#{bindings.AmrtFxdAmt.inputValue}"
label="#{bindings.AmrtFxdAmt.hints.label}"
required="#{bindings.AmrtFxdAmt.hints.mandatory}"
columns="#{bindings.AmrtFxdAmt.hints.displayWidth}"See if this helps:
http://blogs.oracle.com/shay/2010/03/popup_details_for_a_table_reco.html -
The detail part of table doesn't refresh after deleting a row
Hello!
I'm developing a Master-Detail table with some a functionality. Particularly, I want to invoke a DELETE function in the Detail part of the table.
For this purpose, I placed a Command button to the tableSelectOne component of the Detail part of the table, which stores current row key and calls another page. On this (<another>) page I created a ReadOnly form with data related to the row of Detail table, which key is stored. In addition, I added there two Command buttons. First of them is a CancelButton, which does nothing except returning to master-detail page. The second is a DeleteButton, which executes a RemoveEntity method and returns to master-detail page, too.
When I'm tried to delete in this way a row from detail part of table, I discovered, that this row is really deleted from the database, but it doesn't affect on the content of the Detail part of the table. Any kinds of refreshing couldn't aid me, only restart of the application.
Could anybody help me to solve this problem?
Thank in advance.Hi,
I'm facing the same problem but Frank's solution doesn't fix it.
you need to define an invoke action in the binding
for your m/d page and set it into the page binding's
execute section. Then set the condition for invoking
the action to !postback. This will re-execute the
iteratorThis efectively re-executes the iterator, so the master table data is refreshed. You can see the TopLink log showing the query to the db (I'm using TopLink instead of BC). The problem is that the detail rows are queried only once and only the inserts and updates are displayed, not the deletes.
I think the problem may be related to PPR or some cache issue.
See the BC tutorial
http://www.oracle.com/technology/obe/ADFBC_tutorial_10
13/ADFBC_tutorial.pdf
See page 86 "Adding the ServiceHistories Data". This
defines a invoke action for this kinf of task. More
example code is contained in the SRDemo sampleThe tutorial doesn't contain a scenario with master-detail deleting detail records (neither the BC tutorial, nor the TopLink one) so it can't help me :(
The only solution I can think of is using a different model method (a method in the SessionFacade for TopLink) for the detail table (one that takes the master PK as parameter and retrieves the corresponding detail records) and have a selectionListener in the selection component of the master re-execute the method (passing the PK from the master table current row).
Is there a solution that doesn't require the use of a separate method for the detail?
Thanks,
Miguel -
Issue in propagating the fault in BPEL
Hi,
I have an issue in propagating the fault in BPEL.
This is the scenario,
a) I have a BPEL process which inserts data to a table, where a column is a primary key.
b) I invoke this BPEL as a partner link in another BPEL process.
c) I have provided catch for primary key violation in the invoking BPEL process.
Here, it throws below remote fault:
When invoking locally the endpoint 'http://localhost:7777/orabpel/default/InsertExceptionGen/1.0', ; nested exception is:
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is bpel://localhost/default/HandlingESBFaultInsert1~1.0/20502-BpInv0-BpSeq1.6-2. Please check the process instance for detail.
But In the case of ESB, I could able to handle the primary key violation fault.
ie)
a) An esb process inserts data into a table, where a column is a primary key.
b) A BPEL process invoke this esb as a partner link.
c) In the invoking BPEL process, provided catch for primary key violation.
Pls. someone throw some light on this.
Thanks
Jude.BPEL process should get a bindingFault for any application related errors.
since it received remote fault, may be some problem with connectivity.check the timeout values in the bpel configuration. -
Urgent: Issue while displaying the PDF Reports Using XDO Common region
Hi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
SandeepHi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
Sandeep
Maybe you are looking for
-
Dynamic action with set value on date field
Hi, I'm using APEX 4.02 I'm trying to calculate the age based on the date of birth dynamically on a form. I'm trying to do this with a (advanced)dynamic action with set value. I'm able to get this kind of action working based on a number field etc, b
-
Backup and data transfer from old to new iphone
I recently upgraded to the iphone 5s from iphone 4 and need to backup and transfer data from old phone to the new phone. I want to backup using itunes rather than using icloud. Do I need to disable icloud backup on the old phone before I start the
-
II've just got an iphone 6 and set it up using my iCloud backup . Everything has restored perfectly except I've only got 2 of my music albums what has happened to the rest
-
Hello Experts! I need to load Customer hierarchies in BW from ECC. I read the messages on this forum and learned that there are 2 customer related datasources: 0CUST_SALES_LKDH_HIER and 0CUSTOMER_LKLS_HIER I don't get any data in rsa3 for 0CUSTOMER_L
-
Hi, I have an iphone 3gs white 32 gb bought in india. I have issues with the wifi. the phone is able to connect to wifi but if locked for 2 minutes,it loses the cellular network as well as wifi and finds it again. Then the wifi is unable to locate th