Captivate and Flash
Hi,
I have set up a navigation bar in flash rather than using the
in built captivate navigation bar, and then I load my captivate
into the flash movie. For the next button I am using
rdcmndNextSlide = 1; and for pause rdcmndPause = 1; etc.
I want to have a button that will open the menu in captivate,
does anyone know if there is a command I can use in Flash to
achieve this? The only menu related command in captivate I can see
is cpLockTOC which locks the menu into position, but not one to
open or close it.
Thanks in advance for any help.
Unfortunately there is no command / variable to open or close
the TOC menu. You are stuck with the way it was programmed by
Adobe.
I recommend that you suggest the feature to Adobe using this
form:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
The TOC and lack of customization possibilities have been
discussed alot amongst Captivate users so the more people that
report these issues to Adobe - the better the chance of getting a
fix ;o)
Similar Messages
-
My animated gif keeps pausing in captivate and flash
Hi guys, thanks for your help.
I made an animated gif in Photoshop CS4 and inserted it as an animation into captivate 6. The animation works (I played it several times by opening it with internet explorer and safari). But when I open it in Captivate the animation goes black for a split second-several times, before it reappears-several times. It gives it almost a "reloading" or pause look when I play it. The same in flash, but in Adobe Flash CS4 Professional the timeline shows black dots once in a while, as you can see in the screen shot below.
See those black dots? I will insert a picture of what happens, when the player lands on one of those black dots:
It's the same animation, but only shows a little. Like I said, it plays fine when I open it with an internet browser, it plays fine when I play it in photoshop, but it just won't work with flash or captivate.
Any thoughts? Thanks so much!! I really appreciate your help guys!
NatNo problem. Building a simple animation in Flash isn't that bad. You could save each "frame" as an image from PhotoShop and then import these into Flash and place one frame at the time on a keyframe in the flash timeline (press F6 to insert a keyframe).
If you want your animation to loop then you don't have to do anything as this is the default behavior. If you want it to stop at the last frame you insert a command in ActionScript to stop it. Select the last keyframe and hit F9 and type stop() in the ActionScript window.
Good luck!
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips and Tricks and much more.. -
Swfs don't work (Captivate and Flash AS2)
I inserted a .swf from a published Captivate 5 file into my PowerPoint. When I preview the ppt, it plays fine, but when I publish it to Presenter it no longer works. It's just a blank white screen. Any suggestions?
Additionally, I created a very simple Flash file with basic button functionality and brought it into PowerPoint. It shows up but none of the buttons work, and I have no _global or _root code in it. Any help would be great.Unfortunately guys, I wish I had better news, but there's a reason why Captivate 5 content will not run in Adobe Presenter.
By default, Cp 5 now publishes using Actionscript 3 and that's the culprit!
Presenter is still using Actionscript 2.0 so the problem here is that the governing codebase in P7 doesn't recognize, and therefore cannot run/execute/understand the codebase coming from Captivate 5.
There is, however, a workaround: rather than inserting the Cp swf into PPT (for Presenter output), you can link to the Captivate content as externally accessible content. An obvious drawback here is that you'll have another browser window to contend with, but there are a few upsides to this approach as well; namely, if your Captivate content ever needs to be updated, you can do that without ever having to republish your Presenter course. I've utilized this approach a number of times, and although there's some upfront homework to deal with, it's been a time-saver in the long term.
Now, as for the Flash file/buttons you mentioned....I have a quick question for you: are you coding your Flash piece using Actionscript 3? Again, as weith Captivate 5, anything with AS 3.0 in it will be completely ignored in Presenter 7. Also be sure that when you set up a Flash file (and definitely before you publish/export your flash content) you'll need to set the Publish Settings for Actionscript 2.0.
Until Adobe updates Presenter, this is going to be something we all will need to deal with.
Rob
http://www.robrode.com/yabb/ -
Captivate and Flash lite 2.1 for Mobile
Hi, I need to visualize a SWF file in my Intermec CN3 HH, but
when I try to do that, visualization isn't good, i've installed
Adobe flash lite 2.1 and MFlashPlayer 7 to visualize my SWF, but
doesn't work, do I still need another program?, or what can I do?,
I exported from Captivate 3 that SWF file compatible with Flash 7,
do i need to make it compatible with flash lite 2.1, do i need to
export to Flash CS3, and then export from there to flash lite 2.1?,
thanks,> Hi, I need to visualize a SWF file in my Intermec CN3
HH, but when I try
> to do
> that, visualization isn't good, i've installed Adobe
flash lite 2.1 and
> MFlashPlayer 7 to visualize my SWF, but doesn't work, do
I still need
> another
> program?, or what can I do?, I exported from Captivate 3
that SWF file
> compatible with Flash 7, do i need to make it compatible
with flash lite
> 2.1,
> do i need to export to Flash CS3, and then export from
there to flash lite
> 2.1?, thanks,
See if this helps:-
http://www.adobe.com/devnet/captivate/articles/mobile_captivate.html
There are several things in Captivate 2 that are not viewable
in Flash Lite.
The above article should help you create a project file that
can be viewed
on your mobile devices.
Steve
Adobe Community Expert: Authorware, Flash Mobile and Devices
http://www.magnoliamultimedia.com
You need to go to MAX -
http://adobemax2007.com/na/ -
I'm trying to load a Capitivate file into Flash. If I import
the .cp, I lose the mouse animations, ect. If I import the .swf, I
can't get it to play at all! Does anyone know why this is, or how
to fix it?Hi nitsirk857
Perhaps the following TechNote will help. I know it
references Flash MX 2004, but I can't imagine things are that
different between the two. I would think the same issues apply with
either.
Click here to read the
TechNote
Cheers... Rick -
New development in Flash Captivate and Content Management
My compay currently uses Serena Collage for Content
Management along with Macromedia Studio MX 2004 for web site
development. We have an upcoming e-learning project that we are
considering developing in Captivate and Flash. We are mandated that
all development be Section 508 compliant and e-learning must be
SCORM compliant as well.
Can I continue to use Collage to manage content developed
from Captivate and Flash or will I have to use a different product?
According to documentation Captivate SCORM and 508 compliant and is
Flash 508 compliant is this correct?
Please advise.I am not familiar with Collage or its requirements, but Flash
MX 2004 is 508 compliant, I have had to make partial and full
compliant courses with it. That being said, it took us a decent
amount of time and effort. -
Captivate to Flash CS3? Just a dream?
Based on the results in this forum, I take it there is now
way to import Captivate 3 files into Flash CS3 even though it is a
clear menu option on both Captivate and Flash CS3...... How can a
company make the claim, and then totally refuse to fix it?Hi there FacilityDude
Captivate 3 does export to Flash 8 or Flash CS3.
Have you tried what fellow Adobe Community Expert Mark
Fletcher outlined in the thread linked below?
Click
here to read the thread
Cheers... Rick -
Captivate 4 - have installed the newest Flash player 11.4.402.265 and now have an error message when trying to start Captivate. Error message is "The Flash Player for Microsoft Internet Explorer, is not installed or its an older version".
Can someone please help me to resolve this issue?You need to patch Captivate 4.
Details here: http://blogs.adobe.com/captivate/2012/04/adobe-captivate-4-and-flash-player-11-issue.html -
Retrieving the score value from the captivate into flash
Hi,
We have used Captive 2 to built course & publishing it as
a non e-learning output
and loading the published swf file in custom built flash
movie (wrapper).
We have accessed some of the captivate variables to control
the captivate swf.
Does anyone know how to retrieve the score value from the
captivate into flash ?
Thanks
Regards
ChetanHello,
Use the Object Browser in .NET and search on "Summaryinfo" and you'll find the API to use.
Thank you
Don -
Variables from Adobe Captivate to flash
Hi,
can anybody explain me, how to acces variables in captivate
from flash?
I can't export my CP file to Flash CS3, there is an alert
message
The following elements in your project have not been
converted. They are not supported by this importer.
Question slide
508 compliance
A swf animation slide has been imported. The following files
must be made available at publish time:
DefaultPreloader.swf
Please make sure you publish the project to "D:\MyQuizzes\".
Saving the project to this directory will ensure that test
project will work with the swf animation slide.
Thanks for answer...Hi tikiri,
You can access variables directly using the movie instance.
Please check the code below, where we are printing the varCount
variable.
on(release){
_root.play();
_root.createEmptyMovieClip("movie", 999);
_root.movie._x=146;
_root.movie._y=12;
loadMovie("test/test.swf", _root.movie);
trace (_root.movie.varCount);
This code is specific for AS2 captivate swfs. You can try
accessing any of captivate system variables also in this way:
_root.movie.rdcmndNextSlide = 1; // jumps to next slide
_root.movie.cpCmndMute = 1; // mute the audio
trace(_root.movie.cpInfoCurrentDate); // print the current
date
_root.movie.rdInfoCurrentSlide =
_root.movie.cpInfoLastVisitedSlide // jumps to last visited slide
Please go through the list of available variables in
captivate documentation. All the variables starting from "rdcmnd"
are legacy variables and exist in captivate 3 projects as well.
Ones starting with "cp" are new and are not available prior to
captivate 4. Accessing method remains the same for both cp3 and cp4
generated swfs.
For accessing variables in AS3 captivate movies:-
var movieLdr:Loader = new Loader();
var movieURL:String = "CA3_Demo.swf"
var movieURLReq:URLRequest = new URLRequest(movieURL);
var cpMovie;
movieLdr.addEventListener(Event.COMPLETE,loadComplete);
function loadComplete(ae:Event)
cpMovie = movieLdr.content;
//Pause the movie
cpMovie.rdcmndPause = 1;
//Resume the movie
cpMovie.rdcmndResume = 1;
//Jump to next slide
cpMovie.rdcmndNextSlide = 1;
also try,
// print current date
trace(cpMovie.movie.cpInfoCurrentDate);
addChild(movieLdr);
movieLdr.load(movieURLReq); -
When I preview, everything looks good. But when I play
through a browser (Notes, IE, Foxfire) the animated portions
(embedded swf files created in Flash 8) of the project do not show
Instead I get a what looks like a blank slide (it show the slide
color) for what should be the duration of the animation and then
just goes on it's merry way.
Just to confuse things more.... this isn't always true. Some
of the animation works. I created all the files in Flash 8. I've
tried republishing all the animations and refreshing the files in
Captivate and republishing. No Go.
Anyone have any ideas. I'm pretty sure the client is going to
notice that great big 72 sec blank screen.
I also want to thank the people who take the time to read
through these problems and help loser newbies like me. I don't know
what I would do if it wasn't for this forum. NO WAY can I afford
the tech. support programs.Hi LeelandS,
When you publish the Captivate SWF, just notice if there is
an extra SWF also (The imported SWF, which was of version 8, before
you changed that to version 6 and 7). For SWF files of version 8,
captivate does not embed them inside captivate.swf file. So if you
are moving your captivate SWF to some pther location make sure that
the other SWF files are also moved simultaneously.
thanks -
Problems with quizzes and flash 10
I have verified that a course I produced in Captivate 3 interacts incorrectly when played on Flash Player 10. When you have question slides the correct behavior is "click anywhere to continue" after entering an answer and receiving feedback. However when played on Flash Player 10 you must click inside the feedback box. I tried converting to Captivate 4 and this did not fix the issue. I have about 6 of 13 modules that this defect appears on. Can anyone provide any guidance as to how to find a solution to this issue? Thank you.
Hi there
Here are some links that may help:
Click here to read a thread where I believe one of the Adobe Captivate team (Shameer) sheds a bit of light on the issue.
Click here for an Article and link for uninstalling Flash Player/Plug In:
Click here for an Article and link for installing and older version of the Flash Player/Plug In:
Version 9 should allow things to work okay with Captivate 3.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Creating SCORM/AICC compliant content in Adobe Dreamweaver and Flash CS4
Could anyone please advise if Dreamweaver and Flash CS4 is suitable for creating e learning SCORM/AICC compliant content?
Many Thanks.I thought Captivate was only flash based projects. I am currently installing the trial version of the suite to investigate.
I have read the features section of the suite and it states that Dreamweaver CS5 comes bundled with 'Domain specific html templates' that are 'instructionally sound' html templates for elearning course development. Are these not SCORM compliant?
I am really just creating a very simple online course that contains no interactive activities or assessments and is very heavily text based with several supplied flash videos. Advice on what would be best to produce this in would be appreciated.
Please note I have very little understanding of SCORM compliancy etc at this stage.
Many Thanks. -
Touchscreen and flash are having issues
We are using a touch screen to navigate a web site for a
retail kiosk _32" and 19". Everything works fine until you navigate
into a portion that is built with flash. The "only" thing that we
need it to do, as a function on this page is highlight a qty. box
and use our numerical touch pad to update the customers desired
qty. This function work fine on the html built portion of the site.
To confuse our issue even more - when you use a mouse (which we
won't have - because why have a touch screen) to click in the qty
box - touch the numeric keypad - it works.
I have had techs from elo and 3m beat thier heads on this
one, changed every setting possible between the keypad and
touchscreen.
So, please, I am begging for help... if you knows of an
program to assist, an microsoft xp adjustment - past the obvious,
or what I should tell the client that the webmaster needs to do to
the flash page to allow us us to lock down the curser and update
the field with the touchpad.Hi there
Are you certain it is related to Flash Player?
If you are seeing White/Blank screens in playback of published files, I might think something else is at play here. For example, it could be that you have lots of external files that you neglected to upload to the server. If Captivate can't find the files it will probably present a White/blank screen.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Yet another Captivate-to-Flash problem
I'm trying to get some Captivate files into Flash MX 2004.
When I try exporting from Captivate, I get a message that I
need to Flash MX2004 installed. I do, but it doesn't seem to
recognise it.
If I try to import into a Flash movie I get a message that it
doesn't recognise the file format.
This is, as you can imagine, not only frustrating but
disappointing. There are way too many problems with this software -
let's hope Version 2 is a big improvement..Hello tone47b,
I am sorry to hear that you have been experiencing problems
getting Captivate files into Flash. Have you read the
Converting
Captivate to Flash Content - Technote? This might offer you
some assistance.
With regard to importing SWF's into Captivate - You will need
to set the frame rate at
30 fps and publish your SWFs as Flash Player version 6.
HTH
Regards,
Mark
Adobe Community Expert
Maybe you are looking for
-
When printing from the mozilla 4.01 browser the printer spits out blank pages. It seems like it happened after downloading and running mozilla 4.01 browser. I have to copy the link to IE (boo!) to print the coupon or page on my printer. Why?
-
IPod Touch 1st gen to iTunes connecting speed
I'm an iPod Touch 1st gen newbie on iOS 3.1.3; My question is when connecting the iPod to iTunes 10.1.1 how long does it normally take for the device to show up? When connecting an iTouch that's OFF (connection turns it on), I find it probably takes
-
Mass change of Routing / BOM
Hi All, I have a client who is implementing By-Products. My understanding is that to use By-Products the component in the BOM must be assigned to an operation and have the Back Flushing indicator set. The value of the component must be set as a nega
-
Hi, since upgrading to 10.5.1 my screensaver does not start either by hot corner or automatically. I can get it to test from the preference pane, any suggestions?
-
I am attempting to migrate my reuse code from llb files to directories, and in the process grouping code within lvlib files. All of the reuse code resides within my user.lib directory (which is in the search path). After this conversion process, wh