Captivate and Oracle iLearning

I am trying to use the SCORM output from Captivate to track
courses in Oracle iLearning. The courses play fine, but marks the
course Completed whether the entire course is run or not. I have
copied the Oracle .xsd file as called for in the articles in the
Developer area here. Any ideas on what I need to do to be able to
see a percent complete in iLearning?
Thanks,
Sean

Old post, but just in case anybody is having a similar issue. The most probable cause is that the Tracking Type is set to Auto for the SCO in the iLearning admin section. This means it will not use the SCORM API, but will just update the content to "completed" as it is launched.
If your content is pusblished as SCORM and Tracking Type is set to Auto you will probably be recieving message about the "API not being found".
Set your Tracking Type to CMI and see if this resolved your problem. If your tracking type is updated and you still resceive error messages about the API, it is possible the the CMI adapters have not been setup correctly, or at all on your LMS. The CMI adapters facilitate the communication between the courseware and LMS.
Your best bet is to contact the system administrator and ask them to set up the CMI adapters.
We also provide some useful resources for Oracle iLearning courseware developers, and will shortly be adding a courseware trouble shooting guide: http://www.seertechsolutions.com/all_assets/pages/learning/courseware-developers.html
Thanks,
Sam

Similar Messages

Using Captivate quizzes in oracle ilearning 5.0

Hi,
I guess this question goes out to anyone familiar with BOTH oracle iLearning AND Adobe Captivate..
We are using Captivate 2 to develop e-learning content, often including quizzes / tests.
Our current LMS is Oracle iLearning 5.0, and we are experiencing some troubles trying to apply the in-built Captivate quiz for one of our courses.
1. I have created a simple test of 7 questions in Captivate, all weighing 1 point. You need at least 6/7 points to pass the test.
2. In total we plan to give the user 3 shots at passing the test. No clues as to whether (s)he submits the correct answer is therefore given during the test.
So far so good, this works well within iLearning (after having tried 3 times, you're not able to access the questions any longer), but here's the catch:
* If the user gets eg. 4/7 on the first effort, he or she obviously fails (this works), and the RCO is marked as incomplete, the user still has these 4 points the next time he or she takes the test, so if the next result is 3/7 th user gets a total of 7/7 thus passing the test.
Does anyone have a clue of what's causing this error? How do we reset the score for each time? Is there anything special I need to configure on the publish settings / quiz settings in Captivate that I might have forgottten / not know of? I am not very familiar with SCORM, so perhaps there is sth I need to define in the mastery score of the SCORM manifest?
Any help on this would be greatly appreciated.
Thx in advance

This is definitely something on the Captivate side, and it's possible that it is related to not having a mastery score for the learning onject (which you can set manually in ilearning if need be on the learning object properties screen.)
Do you have debugging enabled for the ilearning cmi adapter ( "?lms_debug=on" added to the end of the cmi adapter url)? If so, run the quiz a couple times like you describe and view the java console output. That might give us a clue as to what the content is doing.
Also, try it with a mastery score and see if the behavior is different.
I will also check with my contact at Adobe...
Scott

Oracle iLearning 5.0 on Windows and email notifications issue

Hi!
We are upgrading from iLearning 4.3 to iLearning 5.0 on Windows 2000 server and I have a question related to that.
iLearning 5.0 is certified for Windows.
The accompanying release.txt states that:
--'Email', 'Email and Web' notifications options for Learner Rating and Authorized Enrollment/Unenrollment are not available on Windows platforms. Only web-based notifications should be used.
Through a Technical Assistance request (TAR Number 4439000.992 ) I've found that this problem is due to the use of Workflow 2.6.2 stand-alone which requires sendmail, which is not available on Windows.
This worries me because I want the system to be able to:
* notify admin when authorization is needed for enrollment
* notify course participants about changes or a cancelled course.
* Certification reminder and expiration
* Assessment submission
* Notification to all learners currently enrolled in an offering
The suggested workaround from Metalink is to use a Unix/linux server.
Metalink suggestion:
"you can set up a notification mailer on UNIX to work with stand-alone Workflow
hosted on Windows. The following MetaLink article is a step-by-step guide on how
to do this: Note:254973.1 How To Configure UNIX Sendmail To Work With Oracle Workflow Running On Windows
This would be useful if UNIX was an option for me. It is not.
I have some questions:
1)Can I use WorkFlow 2.6.3.5 on windows with iLearning 5.0?
I know Workflow 2.6.3.5 is working with MS Exchange.
2)Can I use sendmail in some form or shape?
IIS 5.0 (or 4.0) has a mail gateway that can be utilized by a sendmail program.
Sendmail software for windows:
http://www.glob.com.au/sendmail/
http://www.indigostar.com/sendmail.htm
http://www.ntsendmail.com/
http://www.windowsitpro.com/Windows/Article/ArticleID/5289/5289.html
Has anyone tried any of theese?
I'd like to make a suggestion to my IT department on how to solve this issue.
Thanx for any help in advance :-)
Kristian Amlie, Bergen Norway

There are a couple of patches available that allow a customer to upgrade their Oracle iLearning database to 10g and with that, upgrade Oracle Workflow to version 2.6.3 which supports email notifications through workflow on windows.
Patch #s are 4321769 and 4485520
Thanks!
Scott

Downloading and installing Oracle iLearning

Hi.
I need a help with downloading and installing Oracle iLearning.
I have download Oracle iLearning 5.0, and I have Oracle Database 10.2.0.1 and Oracle Application Server 10.1.2.0.2. I have installed all of this products. But iLearning does't work. Then I got message from Learning management forum, that Oracle iLearning works only on Oracle Application Server 9.0.4. I want to download it, but I can't find it on the Oracle site.
Tell me please, is there iLearning version, that works on Oracle AS 10g?
Or, what I should do, to work Oracle iLearning? Where I can download Oracle Application Server 9.0.4?

The main Downloads index http://www.oracle.com/technology/software/index.html has a section called Applications with a link to the E-delivery site, where you could find both iLearning and EBS with Oracle Learning Management.

Still struggling with Captivate 6, Oracle LMS and SCORM 2004

Still can't get this course tracking with scores. Herewith the screen shot. Does anyone know if the settings I have chosen for the quiz are correct. When I load the published course into the lms and test it, it shows "not attempted" prior to opening it and it gives the final score on the last quiz slide. There is a slide after the last quiz slide. It still seems not to transfer the scores to the lms. I recently found out that we have Scorm 2004 version 4, so I changed the configuration setting as it was defaulted to version 3, but that still hasn't helped with the scores. Under the start and end settings, I have chosen close project for the end. I have been through a week of torture with this course! Please can anyone assist as I'm not sure what to do anymore!

Oh no. Now I'm panicking! I will try it. Thanks
Mrs T Cassisa
Oracle Learning Management Practitioner
Tel: 27 (21) 403 3069
Fax: 27 (21) 403 3333
www.parliament.gov.za
>>> RodWard <[email protected]> 2/26/2014 11:20 AM >>>
Re: Still struggling with Captivate 6, Oracle LMS and SCORM 2004
created by RodWard in Quizzing/LMS - View the full discussion
This sounds like you have some major issue in this course project file.
Breaking it up into smaller files might not fix your issue.
I suggest you create a new blank CPTX project file, add one true/false quiz question, set it to report to LMS with the settings you have above, publish as a single SCO package zip file, and upload to both your LMS and SCORM cloud.
If this file doesn't even work, your installation of Captivate would have to be suspect and nothing you do in course module is going to fix that until you work out what the problem is. If this very simple single-SCO lesson plays OK and reports successfully to the LMS, then we need to figure out what is lacking in your current file.
It could be that your current file has somehow become corrupted. See the suggestions here for how to debug general corruption issues:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic- troubleshooting-techniques
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6158090#6158090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6158090#6158090
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6158090#6158090. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Quizzing/LMS at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Oracle iLearning 6.0 Installation

Hi,
Am going to install oracle iLearning 6.0 on Redhat 5U8.
For this certification matrix i need oracle application server 10.1.3.1.0 software, while i am searching, oracle soa suite, only available in this version(10.1.3.1.0).
oracle application server and oracle soa suite both are same?
Please suggest me, which software i need to install iAS or soa suite for this iLearning installation.
Any step by step oracle iLearning 6.0 installtion document available?
Thanks.

If you to to edelivery and choose iLearning Applications for Linux x86, the pack includes iLearning 6.0 and related DB and Apps Server software in the pack (albeit slightly older versions of DB and Apps server). Looks like you can then download patchsets for DB and Apps Server from MyOracle Support to upgrade these.
Steps from there
Install and patch Oracle Database 11gR2 (11.2.0.2+)
Database Created
Install and patch Oracle Application Server 10.1.3.5
Install iLearning 6.0
Scott
http://www.seertechsolutions.com
Edited by: scottymomo on May 24, 2013 6:36 AM

Oracle iLearning Training Material

The Loading Oracle iLearning Training Material (INS50014) document states:
"Four online, self-paced courses will be made available on Metalink (http://metalink.oracle.com), Note ID# 285000.1. A description of each course is supplied below to help you determine which courses will be most beneficial to your users. Each file adheres to the SCORM 1.2 specification, which is a standard e-learning format for transporting data between learning management systems.
Administering your Oracle iLearning Community (Administering_Your_Learning_Community.zip):
A self-paced, web-based course providing information on performing site and user administration tasks. The course guides you through managing your site, setting up users and user groups, and working with roles and permissions. You also learn to work with notifications and use reports.
Working with Content in Oracle iLearning (Working_with_Content.zip ):
A self-paced, web-based course providing information for content assemblers and administrators on building, offering and maintaining your content structures. The course guides you through designing and assembling reusable content objects, managing the content infrastructure, creating offerings, and enabling learner collaboration.
Working with Assessments (Working_with_Assessments.zip):
A self-paced, web-based course providing information on building and managing assessment tests and evaluations in Oracle iLearning. The course includes an overview of the assessment engine, building test item banks, assembling tests and offering tests to learners.
Learner Demonstration (Learner_Demonstration.zip):
This course is a demonstration from a learner perspective on how to use Oracle iLearning. Topics include logging in, search and browse, and using the Oracle iLearning player."
I did a search for these on Metalink but came up empty. Do these exist?

When searching on Metalink, use the Advanced search and enter the Note number 285000.1. The note that is retrieved contains a link to a zip file containing the courses that you can download.
Regards
Mark

Oracle iLearning - playing content is very slow

Hello,
We have problem with iLearning speed. When the content is played in the application server, it shows the content really quickly, but when it is played on the local PC, the speed decreases dramatically. We have checked the servers, the network, everything is fine. What we found, that the speed of viewing learning content on local PC is fast (same as it viewed on server) when no Java is installed (of course in this case we always get errors, and it is impossible to view tests). It looks like, problem can be with Java. Maybe it can be Java configuration problem on server side?
Thank you.
Vaida

Hello Scott,
"When the content is played in the application server, it shows the content really quickly" - yes, I mean when the learner enters the Oracle iLearning site in the application server (locally where the application server is installed) and launches the course (it is played in the Oracle iLearning course player).
"but when it is played on the local PC, the speed decreases dramatically" - I mean that the learner enters the Oracle iLearning site outside the application server (on his own computer) and launches the same course with Oracle iLearning player.
Regards,
Vaida

Install oracle ilearning in the apex 4.1 oracle XE 10g

hi
i have a question can install in apex 4.1 oracle ilearning ?
the database it i have installed in the oracle XE 10g and in linux ubuntu 11.10
Screen
Edited by: 935459 on 20-05-2012 10:51 AM

What version of iLearning you are installing?
Please see these docs.
Oracle iLearning 5.0 Installation Guide [ID 297108.1]
Oracle Learning Management Integration with Oracle iLearning Viewlet [ID 210412.1]
Where Is Impementation Guide or Manual for Oracle iLearning? [ID 390675.1]
Recommended Patch List and Upgrade Path for Oracle iLearning [ID 880084.1]
Oracle iLearning Upgrade Guide - Release 5.2.1 [ID 870493.1]
Thanks,
Hussein

Implementing 3rd party SCORM compliant software onto Oracle ilearning

I am having real trouble uploading SCORM compliant software into Oracle iLearning can anyone help??

Hi,
I've implemented quite a lot of 3rd party SCORM content onto iLearning and have to say it is rarely as easy as it's supposed to be due to the nuances of different authoring tools, production techniques and SCORM packaging methods.
Could you let me know a little more detail on the errors you are geting and I'll see if I can help.
Jon
Quistor UK
[email protected]

Oracle iLearning - SCORM content data

Hi,
we are using CourseLab for creating courses and tests and export them into SCORM 2004. What data is passed and saved to the Oracle iLearning database from the SCORM 2004 content? Are the questions and answers of the test being saved? What are the tables to look for? Does the description of Oracle ilearning DB tables exist somewhere?
Thank You,
Vaida

That's not quite true Anders :)
Assuming the content is using cmi interactions, the user's responses to questions in a scorm 2004 quiz are stored on the interaction table/view.
Here's an example custom report sql you can use to view interaction data for a given content object (the content object id is the parameter)
select
a.id attemptid,
a.create_date attempt_date,
u.username,
rco.title,
int.identifier,
int.description question,
decode(int.type,
'T','True/False',
'C','Multiple Choice',
'F', 'Fill in the Blank',
'S','Put in sequence order',
'M', 'Matching',
'L', 'Likert Scale'
) question_type,
int.learner_response learner_answer,
case
when int.result = 'N' then 'No correct answer, survey question'
else
int_resp.pattern
end
correct_answer,
decode(int.result,
'C', 'Correct',
'I','Incorrect',
'N','Not Evaluated') is_correct,
ROUND(int.latency,0) time_spent_on_question_secs
from
users u,
attempt a,
content_object rco,
interaction int,
interaction_response int_resp
where
a.user_id = u.id and
a.content_object_id = rco.id and
int.attempt_id = a.id and
int_resp.interaction_id = int.id and
rco.id = &rcoid
order by int.create_date
Scott
http://www.seertechsolutions.com

Oracle iLearning - customization (localization, design)

Hello,
We started translating and customizing Oracle iLearning in Lithuanian language through the Admin part Configurable Product Text menu item. We also applied our custom design through the Configurable Themes menu item. But the localized login page is showed only when the session ends. When the user presses log out he is redirected to the English login page version (though in both situations the design of the page is the one that we applied). We have also applied the 8219125 patch but it didn’t help. How to achieve that the localized login page would be showed in both situations? Is it the only way to create the login page? Is there a detailed description how to do that? How to deal with remember password page?
What is more, how to translate the months and weeks in the Calendar? Are those terms placed somewhere in database? Could You point out the exact location?
And we are not able to adjust the custom design to the Admin part of the site through the Configurable Themes menu item. How to achieve that?
Thank You,
Vaida

Vaida,
Be aware that iLearning is (not yet) certified for IE8, this could be the reason why you see the original login page when you log out of iLearning. If this is not the case, you can contact Oracle Support. They will be able to help you.
The configurable theme (except the logo) only applies to the learner interface, not to the admin interface.
Regards
Anders

Oracle iLearning login

Is Oracle iLearning a single sign-on like these forums and MOS or is this a separate account that has to be set up?

firefox on mac osx, could be that. funny how ora things sometimes are so microsoft oriented. thanks.
I tried IE and got some different frustrating results. It seemed to like my metalink user/pw, but then says 404, page not found. . I guess I'll open an SR to their web mess. BTW, I'm getting to this via the help/video training menu on MOS which makes the humor all the more memorable.
"What is your name? What is your quest? ...."

Testbanks in oracle ilearning

Hi,
We use Oracle iLearning 5.0
Does anyone know how to create a reandom selection from a testbank when creating a new test? We have a testbank consisting od 50 questions, and want the test to select 20 random questions each time a user starts the test.
Is this possible?

Yes it is. On the test properties page, ensure the "Item Source" is set to "Rule-based"
This way, when adding questions to a test section, you select the test bank and the number of question (20), rather than selecting the specific questions.

Cp 4 not playing in Oracle iLearning LMS

I love Cp 4 - but now that I've published, loaded to
LMS, I can preview just fine, but learners can't play content, and
object is marked complete when the screen never loaded even page 1.
Help!
LMS is Oracle iLearning (5.2) - published for SCORM 1.2.
There are 2 errors:
the first:
Line: 13
Char: 2
Error: Permission denied
Code: 0
URL: project htm file
The second:
line: 268
char: 4
error: 'document.getElementByld(...)' is null or not an
object
code: 0, URL is my project htm file

Could you explain in detail how to get CP4 courses tracked properly by Oracle LMS?
We tried numerous setting in CP4, but the course was marked completed when user clicks the first page. How to get the Oracle to mark complete at the end of the course?
Our course has tracking component such as buttons and clickbox, and one quiz item. We have also used Oracle xsd files. But the tracking of completion status remains an issue.
What does it mean by "Tracking type not set to CMI if it's autocompleting"? How to set to CMI.
Your kind help is greatly appreciated.

Captivate and Oracle iLearning

Similar Messages

Maybe you are looking for