Captivate doesn't recognize my USB microphone

Hi there,
I'm using Vista (32) with Captivate CS4. I have USB microphone (Sennheiser PC-166) that works beautifully with other applications, but I can't get Captivate to recognize it. When I configure settings...Captivate hears my default PC microphone, but is stone deaf when it comes to the USB mic. I've reinstalled Captivate. I've downloaded updates. But nothing works. Any ideas?
Christy

Hi Christy
Does the link below help?
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Media Encoder doesn't recognize Behringer USB mixer

I just purchased a Behringer Xenyx X1222USB mixer to use for live stream events using Flash Live Encoder on my MacBook Pro. Flash Encoder doesn't recognize the USB input from the mixer. Other I know the computer recognizes it since I went into the Audio Settings and can see the USB input there with audio levels.
I use Yosemite platform. Any help needed as soon as possible.

So, it looks like Media Encoder is stuck in a trial version? The only formats available are indeed .f4v, .flv, .mp3 & h.264. Is a reinstall of Media Encoder the fix?

My iMac doesn't recognize by usb keyboard since I installed security update 2015-002

I installed Security Update 2015-002 on my iMac and since then it doesn't recognize my usb keyboard (I'm typing this with a bluetooth keyboard). I rebooted, unplugged and plugged back in the keyboard all to no avail.
My system:
Yosemite 10.10.2
Mid 2011 iMac 27"
3.4 GHz i7
16 GB RAM
Keyboard: Apple extended USB
Any help would be greatly appreciated.

Mine works okay.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

My new 24in imac doesn't recognize my usb external hard drive- snow leopard

i was attempting to do a new time machine back up on my new mac but it won't recognize the usb external hard drive (kaser 250gb). i used it frequently on my old g5 imac, no problems. i plugged the hard drive into my g4 ibook and it recognized it right away. i followed the apple tip of pulling the power plug out of the wall power socket and pulled all the usb cables out as well (i have the wireless keyboard). i let it rest for over 5 minutes and only plugged in my wacom stylus and usb external hard drive. still nothing. and it doesn't show either in disk utility. i also downloaded as per another thread the 3g ntfs system preference but to no avail. the only thing i can of doing is erase and reformat my external on my ibook, but i don't want to risk loosing the data without a back up.
anything else i can try? (before i buy time capsule) thanks

i just checked again by plugging the external into my ibook g4 and checked how it was formatted - mac os extended (journaled).
Then the 3GFS software is not required at all.
i have an idea, not sure if it will work and it will have to wait a couple days until i get my firewire back from a friend, but this is what i'm thinking: my intel imac has a 1tb hard drive. could i use target mode between my imac and ibook? with my ibook i'd attach the external hard drive, then using the firewire and target mode start it up. hoping that the ibook hard drive and the attached external hard drive would show on my intel mac for which i could copy over the external back ups onto my imac. once completed, i could erase and reformat the external on my ibook and then try again on my imac to see if it appears on my desktop. do you think this might work (even though it is correctly formatted already?)
I use Target mode on a regular basis for mounting the internal drive on a Mac to transfer or salvage data. I don't know if you will be able to connect to an external drive on the Target computer. There's not usually any reason for this and I don't know if the Target Mode will enable the Logic board to deal with the USB ports and transfer data. I kinda doubt it, but other more experienced users can jump in here.
I don't think the problem with your external drive is the format, since you've already checked it and it is already formatted for a Mac. Intel Mac's will mount drives formatted by a PPC Mac with no problems, unless your OS doesn't support the chipset in the USB case that connects to the drive. There are some USB drives that are known to not work well with SL but worked fine with Leopard.
You can buy a cheap USB case (about $30) and move the drive from the old case to the new case, or buy a USB to IDE adaptor cable (about $20), or you can buy a larger external drive that will work on the iMac and use the G4 to transfer the date from the old drive to a new one. Or you can take both drives to a friend with a Mac and use Disk Utility to restore the USB drive to a partition on the Firewire drive. That doesn't fix the USB drive to work with your new Mac, but unless the vendor comes out with a firmware fix, I think that's a lost cause anyway.
other than the above, i may just go buy a 1tb time capsule,
I would not be getting a Time Capsule to back up a single computer. Wireless backups are a lot slower than FireWire or USB (of course, it's the initial backup that takes so much time). If you do have several Mac's that need a TM backup volume, then the Capsule can help you out. It is supported by Apple (and there are a lot of users here in the forums). I'm using a ReadyNAS device for network backups, but it is not supported by Apple, and I have to rely on NetGear for fixes if an OS update breaks my backup system.
BTW, it's a good chance that a TC device will be able to see and mount your USB drive. The incompatible chipset problem with some drives seems to be limited to the USB drivers in SL which the TC is not running. That's why I said that a USB hub may also let you see your drive, the problem is there's no guarantee's...

Pc Suite doesn't recognize a USB connected E-50

Hi,
Short premise, I'm a noob...
I've been given an "old" E-50 (first version, without camera, branded). There were no USB-PC cable so I've bought an original Nokia CA 53.
I've downloaded the last PC Suite (7.1.18) and installed it. I'm running XP service pack 2. After the reboot, I've Started the program, followed step by step the program but nothing happens when the program tell me to connect the phone to the usb port. Basically the phone recognize that is being plugged to a pc (it asks me if I want to go in "pc suite mode"), but the pc doesn't regognize the phone.
I've un-installed pc suite and tried again the procedure, but with no luck.
The cable seems to work (since the phone recognize being plugged to a USB port) BUT I've also have a macbook. After downloadying the isynch plug in for the E50 there is no way to make the mac recognize the phone via USB (same pc problme basically....) while via blootooth the program synch the phone just fine.
I really need to have the firmware updated, it's one of the first one and the phone takes ages to send sms.
Thanks a lot for you help.

try uninstalling pc suite, pc connectivty solution and nokia connectivity drivers
then download nokia pc suite cleaner from http://europe.nokia.com/get-support-and-software/download-software/nokia-pc-suite/extras/nokia-pc-su... and run it to clean ur pc
after u clean ur pc, i'd suggest saving the pc suite installer from the website and install it from ur local drive
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Anyone knows what do do when iMac doesn't recognize any USB or Bluetooth?

Hello,
if anyone can help, please. my iMac does not recognize anything I plug into the USB ports in the back. I can't use any keyboard or mouse or track pad. It does not recognize any bluetooth such as magic mouse, wireless keyboard or track pad. When I plug in an older keyboard or mouse it does not see it at all either. don't know what to do. Can't do anything on the computer, which otherwise seems to be working fine, except everything I was using is frozen on the desktop. any advise?

Zap the PRAM and Reset the SMC, then try again.

My computer doesn't recognize my USB cord

First of all, my printer prints fine if I'm connected with my USB cord in the printer port. However, when I connect any other device (camera or hooking up to do wireless printing) it keeps telling me to plug it in and it IS!! Today trying to go from USB connected to wireless printer, during the set up it says "plug in USB port to computer" (or something like that). Well, the USB was already plugged in. It continued with that message and wouldn't go any further in the set up process. All this time, I thought something was wrong with my camera but now I see - it's something else. So, I tried it with printer on and printer off - no luck. A bad port maybe? So, I tried other ports but continued to be told I needed to plug USB cord in. It's so frustrating- I have a 7520 HP Printer (with all the bells and whistles). A Toshiba laptop, and a new General Electric camera (the camera does not come with a CD to load software so it's not that). I tried setting up wireless using the CD AND by going online to HP site but both tell me to hook up usb cord and won't go any further because it's not recognizing that it IS plugged in!!!! Any advice....I really need to switch over to wireless because my living room is now arranged differently and the printer is on one side of the LRoom and the computer (laptop) is in the middle of the LRoom. Oh, you need to know, I took my camera to a computer shop, WITH MY USB CORD, they plugged it in and there were all my photo files -- so it worked with their computer -- same camera same cord I am using now but it won't recognize the device on my computer. Really puzzled - can you help me? Much thanks!
ellis

You said:
1) First of all, my printer prints fine if I'm connected with my USB cord in the printer port.
2) I tried setting up wireless using the CD AND by going online to HP site but both tell me to hook up usb cord and won't go any further because it's not recognizing that it IS plugged in.
First of all, dedicate just one REAR USB port to the printer. Stop swapping cables or ports. The wireless setup is different, and is selected during the install process ( you have to momentarily use the USB cable).
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Windows 7 64bit doesn't recognize the USB External HDD Stor E art 3.5"

I purchase the External HDD Stor E art 3.5" and pass a few days the windows don't recognize the HDD. Try to connect the drive to other 2 USB ports and nothing happen. Use a USB pen drive to see if was a problem with the USB ports but all 3 are OK. Try it on the Asus notebook and windows 7 recognize the HDD. I formated the HDD in FS NTFS. In the disk managment don't show the external HDD. What can I do to resolve this problem?
My notebook is a Qosmio F60

One last thing you can do about that.
Install OS again using original Toshiba recovery image. After doing this you will have clean preinstalled OS and everything should work well again.
If the same will happen again you should contact nearest Toshiba service and try to clarify the situation.
I know it is pretty radical solution but, believe me, most effective to check notebook functionality.

Equium A60 doesn't recognize the USB webcam

i have just bought a creative vista plus webcam and tried to install it on my Equium A60 laptop, the software installed fine and everything but when i plugged the webcam into the usb port my laptop didn't recognise it.
i tried uninstalling and reinstalling and nothing changed. Anyone have any idea what might be wrong?

Hi, kirsten_uk when you connected your webcam into the USB port for the first time did Windows prompt you to install drives?? If not then something has gone wrong with the driver installation or the camera is defected.
Run Control Panel, System and locate something called "Device Manager", (run this) and look for yellow markers over the USB section. If you see a yellow marker this indicates Windows doesn't have a driver for the device, the problem can be corrected by forcing the re-installation of the drivers.
If still no joy, I would recommend trying another USB port or another computer if that fails the cam is defected.
Richard S.

Macbook pro retina does not recognize Tiki USB microphone

Tiki external microphone is plugged into USB port on Macbook Pro Retina, but does not show up on list of audio inputs in system preferences. I have tried restarting but nothing changed. Has anyone experienced this? I am up to date on software updates and am using 10.8.2.

Omar N wrote:... a way to get the camera on my 24" Apple Cinema display to work while hooked to my Macbook Pro Retina via thunderbolt with the lid closed?...
Pick an app and select your Display's camera. How you do this differs among apps. For some examples you can test, see iMac + 24" ACD: Apple Support Communities
If you continue to encounter the "no camera" error message,use
How to Troubleshoot iSight or LED Cinema Display (24-inch): Basic troubleshooting

MBPr does not recognize Samson USB microphone.

I've been using a Samson GoMic USB for several months. Just today the MBPr has stopped responding to it. I can see the mic under <Sound>, I can select it as the input device, but it does not register any sound input. Works fine on two other macs. Build 12D78, osX 10.8.3 Any tips?
Thanks

Check your settings in the Audio Midi Setup app which is located inside your Utilities folder.

My HP laptop doesn't recognize my USB ports anymore

My 17" HP Laptop, Model g72374nr stopped recognizing my USB drives, and the HP website is a nightmare. I can't find what I need. Will someone please help ASAP, as I'm disabled and need and use those USB ports daily.

Hi @cctuck622,
Welcome to the HP Forums!
It is a splendid place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that your USB drives are not working.
When you look in Device Manager do you see any errors or marks on the USB?
Have you tried right clicking on the USB root hub and updating or rolling back the drivers?
Have you done all your Windows updates?
Have you ran HP Support Assistant to aid with updates and overcoming issues?
Have you tried Using automated troubleshooting (Windows 8)?
You may also wish to try a Refresh Your PC to Resolve Problems (Windows 8)
If you were still unable to resolve this difficulty, you could do a restore back to when they were working.
HP PCs - Using Microsoft System Restore (Windows 8)
The last 2 options would be to do a full factory recovery or call HP support for assistance.
Performing an HP System Recovery (Windows 8)
You will notice an option to backup your personal files to prevent data loss. If you have not done one recently, I suggest you do one now .Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Good Luck
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Captivate 4 doesn't recognize microphone

I just installed Captivate 4 and imported a couple of Cap3 projects. Everything works fine except the audio - it doesn't recognize that the microphone is working. Captivate 3 and other applications have no problems.
I downloaded and installed the update, but it didn't help.
Any suggestions? Thanks.
Marion

Hi Marion,
There are some known issues with certain mics. You may want to read this blog entry:
http://blogs.adobe.com/captivate/2009/03/audio_play_back_and_usb_mic_is.html
--Elizabeth

Captivate won't recognize my microphone

Captivate doesn't recognize my microphone and therefore I
can't record my own audio. I downloaded the Captivate updater,
which is supposed to solve this problem, but Captivate still
doesn't recognize my microphone.
I get the following error message:
"Adobe Captivate could not detect a recording device. Please
check that a microphone or recording device using line in is
connected proeprly and tured on. Do you want to try again?"
Yet my microphone works just fine with GoldWave software
which I have on my computer. I can record with Goldwave, save the
audio and insert it into Captivate. But I can't record directly in
Captivate, which is what I want to do.

Hi there! By all means! Go to
the
page at this link
to download the hot-fix for the Realtek issue. Keep in mind
that it is known to work with Captivate 2.0 but I'm unsure of its
help on version 1.0.1 installations.
Have a good day, All.

Captivate doesn't recognize my USB microphone

Similar Messages

Maybe you are looking for