Captivate into Authorware
I have been using Authorware and Captivate with one another
for years. Now that Captivate 2.0 has come out I am suddenly
running into problems importing the .swf files into Authorware.
Once the file is imported and I run the program, not only is the
simulation not working (clickboxes), but the "Project Created By:
Adobe Captivate 2.0" box is displayed on the screen. The only
buttons that do work are the buttons on the skin.
Does anyone have experience with this that can give some
insight?
Thanks.
>I am encountering the same problem when importing a
Captivate 3.0 .swf file
> into Authorware where the "info" box plays on top of the
movie and cannot
> be
> closed. I am publishing to Flash 7 (publishing to Flash
6 is not an option
> in
> Captivate 3, correct).
>
> Can anyone offer a solution? Thank
Are you using ActiveX to play the Captivate movie? If not,
you probably
should, as the Asset Xtra doesn't support all the features of
Flash 7.
Steve
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu
Similar Messages
-
Captivate, Flash, & Authorware
I know you can import a published SWF file, but... Is it
possible to import a captivate or Flash 8 library directly into
Authorware?
-- Ken>I know you can import a published SWF file, but... Is it
possible to
>import a captivate or Flash 8 library directly into
Authorware?
No.
Steve
EuroTAAC eLearning 2007
http://www.eurotaac.com
Adobe Community Expert: Authorware, Flash Mobile and Devices
My blog -
http://stevehoward.blogspot.com/
Authorware tips -
http://www.tomorrows-key.com -
Embedding an interactive flash into Authorware
I want to embed a flash interactive into Authorware (see:
http://www.cellsalive.com/meiosis.htm
In the past I embedded a basic Flash animation into
Authorware and it seem to work ok. I'm not sure of more complex
ones i.e. that have interactive controls etc. I assume its not so
simple as to embed into authorware. Is it the case that it is
doable, but requires some configuration/programming? Or does it
work be simply embedding the complex interactive flash into
authorware?
thanks in advance
Jonwebacity wrote:
> I want to embed a flash interactive into Authorware
(see:
>
http://www.cellsalive.com/meiosis.htm
> In the past I embedded a basic Flash animation into
Authorware and it seem to
> work ok. I'm not sure of more complex ones i.e. that
have interactive controls
> etc. I assume its not so simple as to embed into
authorware. Is it the case
> that it is doable, but requires some
configuration/programming? Or does it work
> be simply embedding the complex interactive flash into
authorware?
>
> thanks in advance
> Jon
>
If the flash file id published for player version 6 (or
earlier) then
you can embed it using the Flash Asset Xtra, probably in the
same way as
you have before. If it is a later version you will need to
use the
Flash player ActiveX control.
Mark -
Retrieving the score value from the captivate into flash
Hi,
We have used Captive 2 to built course & publishing it as
a non e-learning output
and loading the published swf file in custom built flash
movie (wrapper).
We have accessed some of the captivate variables to control
the captivate swf.
Does anyone know how to retrieve the score value from the
captivate into flash ?
Thanks
Regards
ChetanHello,
Use the Object Browser in .NET and search on "Summaryinfo" and you'll find the API to use.
Thank you
Don -
Is Adobe thinking in terms of taking Captivate into cloud?
Is Adobe thinking in terms of taking Captivate into cloud?
Thanks for the reply.
If I can modify the question to make it a little more pointed with your permission….
I work in the techpubs division of my company. Naturally, we use some Adobe products like FM, Captivate etc.
So, the question is, “Is Adobe planning to take FM, Robohelp, Captivate to the cloud as part of Adobe Technical communication suit?”
Regards,
Priyabrata Tripathy -
I have a small sized Captivate project that I would like to
place into an already existing Dreamweaver web page. I would like
to control where in that page it is placed. Any tutorials or
advise. ThanksThe problem was with having one swf for the project and
another for the skin. Couldn't figure out how to get both on to an
html page and work. Found answer at
http://www.raisingaimee.co.uk/index.php?option=com_content&task=view&id=33&Itemid=28
If you uncheck the show borders in the skin properties you
will only publish one swf. That swf can be placed anywhere you like
in an html dreamweaver page. Just be sure to save the html into the
same folder where the Captivate swf file is.
Hope this helps someone. -
Imported captivates into a separate captivate, timing off
I have a slide that is meant to be an online interactive tool to determine "yes, or no" in 16 categories.
It is a table with 16 squares but I needed an animation that would allow the user to click and change each box from "no" to "yes" and back again.
I created a captivate that was 2 slides - a red "X" for no and a green checkmark for yes.
I then published this captivate as a flash / html5.
Then I created the main interactive, a slide with 16 squares which I then inserted the "yes/no" flash into 16 times.
When I insert the "yes, no" animation into the final slide everything looks great.
However, upon preview and publish, a user can click on the squares to change them from no to yes, but sometimes clicking on one square (animation) also changes 2 squares.
In the screenshot, I have the view so that you can see the main slide with the animations (on left), then the preview (on right), and I have clicked on the first "x" to change it to a checkmark, but when I clicked on the first box, another box was affected and changed to a checkmark as well. I can't decide if it is a timing issue, but my goal is that a user can click on any of the boxes and only affect that box.
Thank you for your ideas and thoughts.I agree with Lieve. Not a good idea.
If you had just placed the images of the tick and cross in each square and used Advanced Actions to toggle them, then you would also have been able to have those actions set User Variables and track which answers the user had given. That data could have been used elsewhere in the same project to modify the experience. -
Export Captivate into PowerPoint or Adobe Presenter or similar?
I have created a 30 minute security awareness course using Adobe Captivate 8 and one of the firm members asked if I could put the content into a user-friendly type program that he could manipulate, extract from and create his own mini e-alert type lessons from for his clients. He wants to be able to add his own comments in his own voice, change the content to be client-specific, etc. I do not know how to take the information I have in Captivate and move it into a novice type program. Any suggestions?
PIP is available in Presenter Video Creator, not in the normal Presenter plug-in. It is not available in Captivate normal projects with extension cptx. You can insert a PIP in the TOC, but have to record it separately.
In Captivate HD Video Demo, extension cpvc (which is also a video creator with a dedicated video editor) you can insert a PIP in the editor. But again you have to create it separately.
The choice is up to you: an easy way to have both recordings together, with very limited editing possibilites in Presenter. Or the Captivate way, more work, better editor.
Afraid to repeat again: we are only talking about pure video now. In the normal Captivate files, that are based on slides, you can insert a video (like a PIP) and distribute it over slides, adapting the slide markers is available in the Video menu. No webcam recording for the moment in Captivate.
Lilybiri -
Captivate into Powerpoint on a Mac
I want to be able to create a software demo in captivate.....but then move it into Powerpoint presentation. Essentially be able to click mouse to move powerpoint slide forward one part of the demo at a time.
In short...
Mouse click in powerpoint to forward to demo step #1 from captivate
Be able to talk about the slide and section of the demo
Then mouse click in powerpoint to forward to demo step #2 from captivate
Be able to talk about the slide and section of the demo
Then mouse click in powerpoint to forward to demo step #3 from captivate
Etc
Etc
Etc
Is this possible?Well, in Captivate, click the Interactions button on the Big Button Bar and choose Click Box. Just drag it out to cover the captivate slide so it's nice and easy to click. It should already be programmed to go to the next slide. But if you need to go to a section, you will need to open the properties and configure it to jump to a specific slide.
Cheers... Rick -
hello,
i made a captivate movie which is made of 4 small movies.
i put the movies together by putting a click box in evey
movie's end.. the click box calls the next movie.
i want now to put the whole 4 movies in a html page.
how can i do that?
* i'm working on captivate 3.
thanx!Hi adi edel
A tip for future forum participation. You asked the same
question in three different forum categories. This is known as
cross posting and should be avoided. If you wonder why this is
considered to be a bad thing, you may
click
here to read the Forum Posting Guidelines.
As for your question, I know that Fabio already offered one
possible thing to try, but here is how I would approach it.
Configure the end option of each movie to open the next one down
the line. This process is called "daisy chaining". As for putting
the movies into an HTML page, are we assuming you wish to simply
include one or more in an existing page?
Cheers... Rick -
Import Captivate into Moodle LMS
We are trying to figure out if we can import a captivate training into the moodle lms and have it track user scores. Does anyone know if there are instructions available anywhere?
A lot of people using Moodle are building their courses in Captivate.
You should try searching for info about Captivate on the Moodle forums at: www.moodle.org -
Importing Adobe Captivate into Robohelp 6
When I try to import Captivate files into RoboHelp it seems
like the import was successful, but when I try to view it the
screen is blank. I any new to working on Captivate as well, but I
beleive everything is ok on that end.
Any ideas?Hey Colum,
Thanks for your help, but I still seem to be having
difficulty.
I am using RoboHelp HTML 6 for my project.
Here is what I have done:
Created my Captivate file & saved it.
Imported the Captivate file in my Baggage Folder.
Problems are:
When I double click on the file in Baggage it opens up
Captivate.
I then tried to import the same clip into a New Topic, but
again all I get is a text box saying Flash Movie File. I compiling
the porject, but when I try to click on the topic with the
Captivate file, but the page freezes. When I mouse over the text
box it says "Click to activate & use this control."
Any help would be great.
Thanks -
Exporting Captivate into Flash
Hi,
When I export my Captivate file to Flash MX 2004, the file
has nothing in it.
What am I doing wrong?
JudyHi mindtube and welcome to our community
I am inferring from your question that you may think Adobe
employees are monitoring this forum. While we might see one or two
pop in here and there, by and large this is a total "user-to-user"
community. I'm a Captivate user same as you. So you might want to
post your question to support using the link at the bottom of this
page. Either that, or via the WishForm linked below:
Click
here to visit the WishForm
Cheers... Rick :) -
How do I add a swf from captivate into muse
I have created a swf in captivate and need to add this to muse. How do I do this?
Hi,
Please refer to the following link http://forums.adobe.com/message/5087131
Regards,
Aish -
SWF file would have playable Flash animation
Hi there
Perhaps the link below will help?
How to embed SWF file, Flash Photo Gallery,animation movie in Word
Cheers... Rick
Maybe you are looking for
-
Reinstall Adobe Acrobat 7.0
I got new computers and tried to install Adobe Acrobat 7.0 but was not able to activate. I am using windows 7. I am not good with technical issue, please give very simple instructions how to reinstall to new computers. Thanks, Anna
-
"No List Available" in spool.
Hi All, I am generating a report in foreground using SQ01 is SAP Query and I am getting proper data in ALV format.But whenever I am running it in background , after completion of the program ,I am getting an error message " No List Available " Althou
-
Database is High Protection Mode
Dear Friends, I configured dataguard standby database in oracle 11g.Then i did the following scenario's. 1)I changed the protection mode to "High protection". 2)Shutdown the standby database. As per the document, The primary database shutdown when st
-
Mysterious font switching in CS2!
I am working on a MAC in Indesign CS2 and trying to typeset something in Matrix Regular. I use Font Agent Pro for font management. Matrix Regular is properly installed in Font Agent Pro, and is working in other programs of mine. It also does appear o
-
We are trying to find or create a solution for converting any of a set of Adobe files (PSD, AI, PDF, INDD) into JPEG files for each page. Doing it through an API would be preferred, but at this point we are happy to have any starting point to work f