Captivate latest version in Tech Communication Suite

Hello,
I have installed Adobe Technical Communication Suite very recently and the Captivate version after an update is 5.0.2. However, I have seen that the latest version available is 5.5. Does anybody know why Adobe Technical Communication Suite does not include the latest Captivate version available? Can I upgrade to that version?
The 5.0.2 version just won't record correctly on my Windows 7 system. I tried the "run in administration mode" workaround, but it still does not work. That is why I would like to upgrade and see if this issue has been solved in 5.5 version.
Regards

Thanks for your reply.
Yes, the version is the latest, the one you mentioned, with al patches installed. My screen resolution is 1900x1200, which is the recommended resolution for the laptop I am using, according to Windows 7. The hardware I am using should be enough in terms of processor and RAM: Intel core duo at 2.54 GHz. 4 GB RAM. However, I did notice that dedicated video memory is just 64 MB, but total available graphics memory is 1575 MB.
The sreen area recorded is 640x480. Apparently, it always records the area above the upper red line of the square. It never actually records inside the screen recording area but above it, and consequently the mouse movements are wrong and so are mouse clicks because it all happens above that red line.
Yes, higlight boxes are misplaced. They also appear above the recording area I specified (above the upper red line of the square). I do not use spanning and the browser zoom is set at 100%.
I tried creating a new porject lowering the screen resolution of my PC to 1600 x1200 but it still does not work. I don't know it will have something to do with resolution.

Similar Messages

Captivate 5.5 not bundled with Tech Communications Suite 3.0

I just purchased the Tech Communications Suite and assumed I was getting the latest version of Captivate which is 5.5. Unfortunately that is not the case. Since I've been getting some strange behavior I thought I would just check to see if there is any way to get the most up-to-date version of Captivate. Adobe Virtual Chat tells me it's "not possible" but I don't like that answer. I just feel if Captivate 5.5 is out there and I just bought the Suite 4 weeks ago, it should be a part of the bundle.
Any solution?
Thanks in advance as always!

Welcome to our community
I think I'd first try ensuring your browsers have the latest Flash Player/Plug-In installed.
If that fails, try disconnecting any network cables.
Lastly, try temporarily disabling your Anti-virus software. You may need to add Captivate as an exclusion if disabling the Anti-virus helps.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Whats latest version of nseries pc suite?

what version is it?
My beta labs version of nseries pc suite works fine apart from when I check for updates for the pc suite itself and it comes up with"THERE WAS A PROBLEM COMMUNICATING WITH THE NOKIA SOFTWARE UPDATE SERVER PLEASE VERIFY YOUR INTERNET CONNECTION"
Even though I try and turn firewall off it still wont check for updates anymore.
Liam

Hi Liam182,
As per i know, current version of beta available in the betalabs is 2.0.162 i guess...Whereas in the Nokia Support pages, NSeries PC Suite version avialable is 1.6.....Nokia PC Suite (Normal) is 6.85.14.1....By the way may i know some more details about your connection and PCs....Thanks

Problem running Tech Communication suite on 64-bit, Vista machine?

I recently upgraded to Vista 64 bit system. I had problems installing Tech Communciation suite 1.0, which was running fine on 32-bit, XP machine.
With great difficulty, I was finally able to install but now I am having problems in creating pdfs from Framemaker. Has anyone experienced this problem too?
My colleague who is running Tech Suite 1.0 on 64-bit XP machine is having problem opening Robohelp 7 HTML. The RH Software Setup screen appears and asks for serial number of this product. When she enters the serial number, it does not recognize it.
Please help?
Thanks,
Shoba

Adobe does not officially support TCS 1 or 2 on the 64 bit platform.
There have been some posts about this so it might be worth searching previous posts.
See www.grainge.org for RoboHelp and Authoring tips

Uninstall Trial version of Technical Communication Suite 2

I decided to try out CS2. I decided that I didn't need all the features and that I'd be okay just using the software I already had installed. Long story, short, I ran the uninstaller and it did not uninstall Acroat 9 Pro Extended. Because this is still in place, I cannot successfully view any PDF files on this machine and I can't even revert back to what I had before. How do I get this last piece of CS2 off my machine so I can get back to where I was before installing the trial version?

Try using the Adobe CS3Clean and CS4Clean scripts. These were designed for the CreativeSuite, but also take out Acrobat:
http://www.adobe.com/support/contact/cs3clean.html
http://www.adobe.com/support/contact/cs4clean.html

Tech Communication Suite

Hi, is anybody having trouble getting the TOC to behave after
importing a Framemaker Book file? I keep getting a long, long list
of topics and can't find a way to marshal them into books and
sub-books so that the Help looks half-way professional and is easy
to use. I think I see a way to do it manually but that's not ideal.
The old Robohelp for Framemaker seemed to handle this okay.
Thanks.

Hi, thanks
I'm aware of this and it worked fine in Robohelp for
Framemaker but version 7 HTML isn't producing acceptable TOCs or
Indexes from my FM TOC and IX files. Every topic, regardless of
hierarchy or heading or font size, weight, etc. is just placed in a
long flat list. I don't know if it's the styles I'm using in my
(admittedly quite complex) book templates or whether I need to do
some 'mapping' between Frame and Robohelp styles (this part of the
process in the new version confuses me and the dialogues/Help
aren't very 'helpful' and I seem to end up abolishing the styles
from the book, which I want to retain, and keeping only the
Robohelp styles, which I don't). I'm trying a very small document
as a test case now but not having much more luck. As for the
Index...that's too painful to go into at the moment.
Cheers, Simon

Tech Comms Suite (upgrade version)

Hi,
I am now the proud owner of the Tech Comms Suite upgrade
version 1.3. Reading the yellow slip of paper accompanying the box,
it says 'Adobe recommends that you uninstall any previous version
of Technical Communications Suite or any component of the Technical
Communications Suite... before you install Technical Communications
Suite 1.3'.
My dumb question is: if you uninstall FM or RH software, how
does the software know which is your upgrade product?
I was planning on installing the Tech Comms Suite on another
computer temporarily, until I get used to the new UI, and thought I
would have to uninstall FM (seeing as I want to continue using RH
on my own pooty) and install it onto the same PC where I want to
install TCS. However, now it seems I don't have to. Is it just a
case of entering a qualifying serial number somewhere in the
upgrade installation? Has anyone here upgraded to TCS and can shed
some light please?
Many Thanks,
Liz

Thanks Peter and Vivek for your replies. When I bought it
from the Adobe website I chose the upgrade from one product option
(not upgrading from TCS v1.0) and I did indeed I receive two disks.
The install trundles through. At the end it asks if I want to
open an application. Of course I do because I want to play, so I
click on the relevant radio button that selects an application to
open, then click on OK, or Next, or whatever.(sorry cannot remember
actual name of button!).
I then get the screen where you choose to open the trial
version or enter the serial number. So I select the relevant radio
button and enter the serial number from the TCS box. I then click
OK, or Next, or whatever and then I get a popup error saying that
my serial number is not valid.
Technical Support have confirmed that it is a valid serial
number. I searched the forum and found there may be conflict with
Acrobat, but the computer where I installed the TCS did not have
Acrobat installed prior to installing TCS. I get the error message
when I enter the serial number for RH, FM and CP. I can open
Acrobat (as that didn't ask for the serial number) but I haven't
tried opening or creating a PDF file.
In other words, I don't get as far as entering the qualifying
serial number.
Does anyone have any ideas for me to try please? Has anyone
else experienced this when they upgraded from one product (not TCS
v1.0)?
Thanks for your help
Liz

NOKIA PC SUITE'S LATEST VERSION INFORMATION - KIND...

Hi Moderators,
Please do check our forum says that latest Nokia PC Suite has 7.0 version released 2-Jul-2008
The latest version of Nokia PC Suite is 7.0, released 2-Jul-2008 - download it for free at www.nokia.com/pcsuite.
Please do make change in our forum headlines, as most of our users donot know that new version is released
Please update ASAP in our forum list that Nokia PC Suite 7.1 is released
Solved!
Go to Solution.

Hi,
Thanks a lot for consideration Issue is resolved now.

Adobe Presenter in Technical Communications Suite 5?

Is Adobe Presenter 9 included in Technical Communications Suite 5? I just downloaded a trial version of Tech Comm Suite 5, but did not receive Adobe Presenter (only Adobe Presenter Video Creator).

Yes, Adobe Presenter 9 is a part of Technical Communication Suite.
Have you ever install Adobe Presenter 9 on your machine ?
Please check the version of your Microsoft PowerPoint.?
Please check this document for tech specs and installation instructions.
http://helpx.adobe.com/presenter/release-note/presenter-9-release-notes.html
Regards,
Rajeev.

"Older Version of Nokia Pc suite cannot be removed...

i got this msg. when i try installing the latest version of Nokia Pc suite(7.1.18.0)..
i already tried uninstalling the older 1 but i also get the error message saying, "Cant Find nokia pc suite.msi"
thx for any help in advance..

while uninstalling older version of Nokia pc suite. It gives a message "The installation source for this product is not available. Verify that the source exists and that you can aceess it."
Then I tried to install Nokia Suite 3.8.30 so that it will replace older version. But it gives a message "The older version of connectivity cable driver cannot be removed."
please give the solution.

OSB Latest Version

Hi,
I am just trying to my hands with OSB tutorials. Is OSB 10gR3 is the latest version included in SOA Suite 11g?
Please let me know.
Thanks
Siva

Hi Siva,
OSB still not included in SOA Suite 11g.
Latest version of OSB available now is 10gR3. It is a separate installable and do not comes with SOA Suite 11g.
Thanks,
Abhra

Latest version of SOA Suite released for customer

What is the latest version of SOA Suite released for customer? Where I can find the documentation of the release?

The latest release is SOA Suite 10.1.3.4.
http://www.oracle.com/technology/software/tech/soa/index.html
You should use the latest MLR#5 with it.
http://www.oracle.com/technology/products/ias/bpel/htdocs/bpel_release_archive.html

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again!

Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4? Thank you

Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4?
Thank you.

Not sure what CCS has that you’re referring to, but TCS5 is out and can be installed via subscription or downloaded installer.

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz

Captivate latest version in Tech Communication Suite

Similar Messages

Maybe you are looking for