Captivate not resuming after quiz complete just getting the loading screen

Hi Everyone.
I am using captivate 5 and have created a 60 slide project. The project contains 8 quiz questions and is published as scorm 1.2. The project is delivered using moodle 2.02. The problem is this. When the project is first launched it loads and plays correctly. If the student exits before the quiz is complete and then comes back to it later the project resumes correctly, The problem occurs where the student exits the project after the quiz is complete. If after this point the student tries to re-launch the project later, the project launches but gets stuck at the gray loading screen. I have installed the latest hotfixes and the problem seems to occur on all browsers.
Any ideas would be gratefully appreciated.
regards
J

OK.  I've not struck this issue before with Moodle, but that may be due to using earlier versions of Moodle.
Here are a couple of things to try:
Try setting more grading attempts in Moodle and not make any changes to the Captivate lesson itself.  If this now allows the user to open the module again, you know where the issue is.
If changing the attempts in Moodle has no effect, try changing the Required settings in the Captivate module Quiz > Settings.  Set it so that the user can skip the quiz if they want.  That's the least restrictive setting.  If that now allows the user to progress again, this setting may be your issue.

Similar Messages

  • Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

    Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

    Hi Rave,
    Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt  to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version".  E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
    Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
    Any suggestions?

  • Adobe story online isn't loading. I just get the loading bar going on for hours. I've restarted my browser, deleted my cookies, installed the newer version of Flash and still no loading.

    Adobe story online isn't loading. I just get the loading bar going on for hours. I've restarted my browser, deleted my cookies, installed the newer version of Flash and still no loading.

    Nope still nothing going incognito, or doing it through different browsers. I guess the other thing is a an online picture editing program told me I needed to update my flash, so I tried to install it several time but am not sure if it actually did. Now some video players (that had previously worked) command me that I need a newer version of Flash. What happened?

  • I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12

    I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12, I have had no problems in the past , I still have had no response to this post and it has been several weeks since initially posted, is there anyone awake at Adobe, can someone give me advice or is there total lack of interest once the product has been purchased I have been a customer of PSE for many year since PSE6 now on 12 but lack of response may cause me to rethink

    Turn off your iPad and put it in recovery mode. Try to restore it via iTunes.
    http://support.apple.com/kb/HT1808

  • JUST GETTING THE LOADING ICON AFTER DOWNLOADING CREATIVE CLOUD SOFTWARE!!!! Please Help!

    I just purchased the lightroom 5 and PS suite and went to download them...i was prompted to install the creative cloud first...once i did that, i tried going to the creative cloud App and the menu opened but all i get is the "loading" icon and nothing comes up, even after waiting 100 minutes. I have already chatted on the support forum with "support techs"...they have just told me to un-install and re-install and one even had me run a "cleaner program" but none of it is fixing the problem! i just want to use lightroom 5! And now when i go to trash the install versions and delete my trash bin, it won't let me because it sayds the cleaner cannot be deleted!!!!! what do i do??????????

    Hi Rachel, sorry you're having trouble.  If it's easier or faster for you, you can just use the Adobe CC direct links to download and install whichever Creative Cloud tools you want, including Photoshop CC and Lightroom 5.
    Those links do not use the Creative Cloud Desktop manager app, if you're having difficulties with that.

  • My MacBook Pro will not boot up. I just get a grey screen with a "no entry" symbol and a spinning time icon. Any ideas as to how I can get over this issue?

    Hi, I tried to start my MacBook Pro are 2 weeks and all I get is a grey screen with a grey no entry sign and a spinning timer. I have tried a reboot with shift cmd and v and it seems to be looping and referring to an external device. Only the power is attached. Can anyone provide advice on how to get past the grey screen? Many thanks.

    Does the system automatically back up data?
    No.
    As you can getto the Recovery partition, you can at least verify your disk using Disk Utility. If it reports that repairs are needed, you can try to repair but I've found that nearly 100% of the time repairing the disk inevitably FAILS. You should be prepared to, 1) buy a new drive for your machine and, 2) buy a good (see here) enclosure for your damaged drive to try to recover data.
    After you get everything fixed, use at least two backup methods to keep your data secure. See Most commonly used backup methods.
    Clinton

  • HT201263 tried the restore but it wont restore- just get the black screen with the plug into i tunes

    does anyone know how to get it to restore? I have tried but it wont restore and keeps going to the black screen with the cord plug into i tunes

    You can also try placing the iPod in recovery mode using one of these programs and then restore
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                         
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella

  • My iMac freezes at start. I just get the gray screen and apple symbol.

    I turned it off and on and then nothing. Just gray screen and spinning wheel. I also see the mouse pointer.

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • My iphone display is not working after apple logo. But the touch screen works fine.

    My Iphone 4S Was fully submerged in water, it has not worked for weeks but i plugged it in to the charger today and it worked started up, charged fine the apple logo appeared and then it just stayed black, I managed to type my passcode in without seeing the screen and it unlocked fine. Im now restoring it with itunes and hopefully it helps.

    You probably still have warranty. Just go back to your carrier and tell them that your phone suddenly stopped working and they will most likely end up giving you a new/fixed iphone.
    Good Luck!

  • Why do i just get the itunes screen?

    I have tried to put my ipad in recovery mode but nothing is happening.  When I connect it to the computer I don't see it under devices.  What else do I need to check or do it fix this ipad?

    If this doesn't work, Google for DFU mode.

  • I can access my music library, but not the Itunes store. Just getting a white screen. It starts to connect but just stops. Any suggestions?

    I can access my music library, but Itunes Store is not opening. I am just getting a white screen. Any suggestions?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that didn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter the Wi-Fi password.
    If that doesn't help, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    No data is lost due to a reset.

  • IQ770 All other users logging on just get a blue screen

    I have no problem logging on to the PC with my user account, but when any other user that I set up (or the Guest logon) attempts to log it says "Wecome" and then goes to a blue screen and that's it (even if the new User account is set up with Administrator privileges).  If I do a CTL-ALT-DEL at that point it will bring up the screen that allows me to Switch User or shut down the PC - if I switch to my user account it says the other user is logged on but they just get the blue screen.  Anyone have any idea what is going on or how to fix it?  Thanks much.

    Might be a virus.
    I suggest creating a new account again, and wiping out their accounts if their data is saved.
    If this doesn't work, either System Restore or System Recovery.
    I have more HP devices than you'd expect.
    1 HP TouchPad 32 GB with Android
    2 HP Touchsmarts (310-1000z and IQ527)
    2 HP Printers (J6480 and J5750)
    1 Laptop (HP DV6253CL)
    Have at least some experience in each of those devices, and i'll do my best to help you.
    Kudos if I helped!

  • After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The  requested URL was not found on this server"

    After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The  requested URL was not found on this server".
    Anyone have any ideas?

    You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
    I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
    1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
    2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
    3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
    4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
    5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
    6. I then rebooted the phone and launched the Photo Library.
    7. The Library rebuilt it's self again and recreated the thumbnails.
    8. The problem was fixed!!! Thank you M Bentley!
    I hope this helps - this has been bugging me for 2 weeks.
    Regards
    Alijm23

  • Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL. When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up. When I log in with my Apple ID I just get: The Apple ID you entered couldn't be found or your password was incor

    Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL.
    When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up.
    When I log in with my Apple ID I just get:
    The Apple ID you entered couldn't be found or your password was incorrect. Please try again.
    I have however made sure that this is the correct Apple ID and password that I am putting in. In the Mac App Store it works.
    Do you have any solution?
    I am running Mavericks 10.9.2.

    To post a screenshot click on the "Camera" button at the top of the reply box and upload it there.
    MtD

  • After I covered 250 miles I got the automated congratualtions, but now after every run I get the recorded message again saying I just covered another 250 miles. Can I reset or stop it without completly resetting everything?

    I run with the Nano and shoe sensor. After I covered 250 miles I got the automated congratualtions, but now after every run I get the recorded message again saying I just covered another 250 miles. Can I reset or stop it without completly resetting everything?

    Same issue here.  This is really disappointing.  I used to look forward to the milestone messages after each run, especially when I was surprised by a celebrity voice.  Now, it's the same thing every single time, "Congratulations on another 250 miles.  Way to go!" or something along those lines.  I was proud of the 250 mile mark, but please...I don't want to hear it every time! 
    I hope there's some movement on this issue.
    ~ Heather

Maybe you are looking for